/* * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SCI_HOST_H_ #define _SCI_HOST_H_ #include #include "remote_device.h" #include "phy.h" #include "isci.h" #include "remote_node_table.h" #include "registers.h" #include "unsolicited_frame_control.h" #include "probe_roms.h" struct isci_request; struct scu_task_context; /** * struct sci_power_control - * * This structure defines the fields for managing power control for direct * attached disk devices. */ struct sci_power_control { /** * This field is set when the power control timer is running and cleared when * it is not. */ bool timer_started; /** * Timer to control when the directed attached disks can consume power. */ struct sci_timer timer; /** * This field is used to keep track of how many phys are put into the * requesters field. */ u8 phys_waiting; /** * This field is used to keep track of how many phys have been granted to consume power */ u8 phys_granted_power; /** * This field is an array of phys that we are waiting on. The phys are direct * mapped into requesters via struct sci_phy.phy_index */ struct isci_phy *requesters[SCI_MAX_PHYS]; }; struct sci_port_configuration_agent; typedef void (*port_config_fn)(struct isci_host *, struct sci_port_configuration_agent *, struct isci_port *, struct isci_phy *); bool is_port_config_apc(struct isci_host *ihost); bool is_controller_start_complete(struct isci_host *ihost); struct sci_port_configuration_agent { u16 phy_configured_mask; u16 phy_ready_mask; struct { u8 min_index; u8 max_index; } phy_valid_port_range[SCI_MAX_PHYS]; bool timer_pending; port_config_fn link_up_handler; port_config_fn link_down_handler; struct sci_timer timer; }; /** * isci_host - primary host/controller object * @timer: timeout start/stop operations * @device_table: rni (hw remote node index) to remote device lookup table * @available_remote_nodes: rni allocator * @power_control: manage device spin up * @io_request_sequence: generation number for tci's (task contexts) * @task_context_table: hw task context table * @remote_node_context_table: hw remote node context table * @completion_queue: hw-producer driver-consumer communication ring * @completion_queue_get: tracks the driver 'head' of the ring to notify hw * @logical_port_entries: min({driver|silicon}-supported-port-count) * @remote_node_entries: min({driver|silicon}-supported-node-count) * @task_context_entries: min({driver|silicon}-supported-task-count) * @phy_timer: phy startup timer * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for * the phy index is set so further notifications are not * made. Once the phy reports link up and is made part of a * port then this bit is cleared. */ struct isci_host { struct sci_base_state_machine sm; /* XXX can we time this externally */ struct sci_timer timer; /* XXX drop reference module params directly */ struct sci_user_parameters user_parameters; /* XXX no need to be a union */ struct sci_oem_params oem_parameters; struct sci_port_configuration_agent port_agent; struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; struct sci_remote_node_table available_remote_nodes; struct sci_power_control power_control; u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; struct scu_task_context *task_context_table; dma_addr_t tc_dma; union scu_remote_node_context *remote_node_context_table; dma_addr_t rnc_dma; u32 *completion_queue; dma_addr_t cq_dma; u32 completion_queue_get; u32 logical_port_entries; u32 remote_node_entries; u32 task_context_entries; void *ufi_buf; dma_addr_t ufi_dma; struct sci_unsolicited_frame_control uf_control; /* phy startup */ struct sci_timer phy_timer; /* XXX kill */ bool phy_startup_timer_pending; u32 next_phy_to_start; /* XXX convert to unsigned long and use bitops */ u8 invalid_phy_mask; /* TODO attempt dynamic interrupt coalescing scheme */ u16 interrupt_coalesce_number; u32 interrupt_coalesce_timeout; struct smu_registers __iomem *smu_registers; struct scu_registers __iomem *scu_registers; u16 tci_head; u16 tci_tail; u16 tci_pool[SCI_MAX_IO_REQUESTS]; int id; /* unique within a given pci device */ struct isci_phy phys[SCI_MAX_PHYS]; struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ struct asd_sas_port sas_ports[SCI_MAX_PORTS]; struct sas_ha_struct sas_ha; struct pci_dev *pdev; #define IHOST_START_PENDING 0 #define IHOST_STOP_PENDING 1 #define IHOST_IRQ_ENABLED 2 unsigned long flags; wait_queue_head_t eventq; struct tasklet_struct completion_tasklet; struct list_head requests_to_complete; spinlock_t scic_lock; struct isci_request *reqs[SCI_MAX_IO_REQUESTS]; struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; }; /** * enum sci_controller_states - This enumeration depicts all the states * for the common controller state machine. */ enum sci_controller_states { /** * Simply the initial state for the base controller state machine. */ SCIC_INITIAL = 0, /** * This state indicates that the controller is reset. The memory for * the controller is in it's initial state, but the controller requires * initialization. * This state is entered from the INITIAL state. * This state is entered from the RESETTING state. */ SCIC_RESET, /** * This state is typically an action state that indicates the controller * is in the process of initialization. In this state no new IO operations * are permitted. * This state is entered from the RESET state. */ SCIC_INITIALIZING, /** * This state indicates that the controller has been successfully * initialized. In this state no new IO operations are permitted. * This state is entered from the INITIALIZING state. */ SCIC_INITIALIZED, /** * This state indicates the the controller is in the process of becoming * ready (i.e. starting). In this state no new IO operations are permitted. * This state is entered from the INITIALIZED state. */ SCIC_STARTING, /** * This state indicates the controller is now ready. Thus, the user * is able to perform IO operations on the controller. * This state is entered from the STARTING state. */ SCIC_READY, /** * This state is typically an action state that indicates the controller * is in the process of resetting. Thus, the user is unable to perform * IO operations on the controller. A reset is considered destructive in * most cases. * This state is entered from the READY state. * This state is entered from the FAILED state. * This state is entered from the STOPPED state. */ SCIC_RESETTING, /** * This state indicates that the controller is in the process of stopping. * In this state no new IO operations are permitted, but existing IO * operations are allowed to complete. * This state is entered from the READY state. */ SCIC_STOPPING, /** * This state indicates that the controller could not successfully be * initialized. In this state no new IO operations are permitted. * This state is entered from the INITIALIZING state. * This state is entered from the STARTING state. * This state is entered from the STOPPING state. * This state is entered from the RESETTING state. */ SCIC_FAILED, }; /** * struct isci_pci_info - This class represents the pci function containing the * controllers. Depending on PCI SKU, there could be up to 2 controllers in * the PCI function. */ #define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS) struct isci_pci_info { struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; struct isci_host *hosts[SCI_MAX_CONTROLLERS]; struct isci_orom *orom; }; static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) { return pci_get_drvdata(pdev); } static inline struct Scsi_Host *to_shost(struct isci_host *ihost) { return ihost->sas_ha.core.shost; } #define for_each_isci_host(id, ihost, pdev) \ for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \ id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \ ihost = to_pci_info(pdev)->hosts[++id]) static inline void wait_for_start(struct isci_host *ihost) { wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags)); } static inline void wait_for_stop(struct isci_host *ihost) { wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags)); } static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev) { wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags)); } static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) { wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); } static inline struct isci_host *dev_to_ihost(struct domain_device *dev) { return dev->port->ha->lldd_ha; } /* we always use protocol engine group zero */ #define ISCI_PEG 0 /* see sci_controller_io_tag_allocate|free for how seq and tci are built */ #define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) /* these are returned by the hardware, so sanitize them */ #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) /* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */ #define ISCI_COALESCE_BASE 9 /* expander attached sata devices require 3 rnc slots */ static inline int sci_remote_device_node_count(struct isci_remote_device *idev) { struct domain_device *dev = idev->domain_dev; if (dev_is_sata(dev) && dev->parent) return SCU_STP_REMOTE_NODE_COUNT; return SCU_SSP_REMOTE_NODE_COUNT; } /** * sci_controller_clear_invalid_phy() - * * This macro will clear the bit in the invalid phy mask for this controller * object. This is used to control messages reported for invalid link up * notifications. */ #define sci_controller_clear_invalid_phy(controller, phy) \ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) { if (!idev || !idev->isci_port || !idev->isci_port->isci_host) return NULL; return &idev->isci_port->isci_host->pdev->dev; } static inline bool is_a2(struct pci_dev *pdev) { if (pdev->revision < 4) return true; return false; } static inline bool is_b0(struct pci_dev *pdev) { if (pdev->revision == 4) return true; return false; } static inline bool is_c0(struct pci_dev *pdev) { if (pdev->revision == 5) return true; return false; } static inline bool is_c1(struct pci_dev *pdev) { if (pdev->revision >= 6) return true; return false; } enum cable_selections { short_cable = 0, long_cable = 1, medium_cable = 2, undefined_cable = 3 }; #define CABLE_OVERRIDE_DISABLED (0x10000) static inline int is_cable_select_overridden(void) { return cable_selection_override < CABLE_OVERRIDE_DISABLED; } enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy); void validate_cable_selections(struct isci_host *ihost); char *lookup_cable_names(enum cable_selections); /* set hw control for 'activity', even though active enclosures seem to drive * the activity led on their own. Skip setting FSENG control on 'status' due * to unexpected operation and 'error' due to not being a supported automatic * FSENG output */ #define SGPIO_HW_CONTROL 0x00000443 static inline int isci_gpio_count(struct isci_host *ihost) { return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select); } void sci_controller_post_request(struct isci_host *ihost, u32 request); void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index); void sci_controller_copy_sata_response(void *response_buffer, void *frame_header, void *frame_buffer); enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, struct isci_remote_device *idev, u16 *node_id); void sci_controller_free_remote_node_context( struct isci_host *ihost, struct isci_remote_device *idev, u16 node_id); struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag); void sci_controller_power_control_queue_insert(struct isci_host *ihost, struct isci_phy *iphy); void sci_controller_power_control_queue_remove(struct isci_host *ihost, struct isci_phy *iphy); void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); void sci_controller_remote_device_stopped(struct isci_host *ihost, struct isci_remote_device *idev); enum sci_status sci_controller_continue_io(struct isci_request *ireq); int isci_host_scan_finished(struct Scsi_Host *, unsigned long); void isci_host_scan_start(struct Scsi_Host *); u16 isci_alloc_tag(struct isci_host *ihost); enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag); void isci_tci_free(struct isci_host *ihost, u16 tci); int isci_host_init(struct isci_host *); void isci_host_completion_routine(unsigned long data); void isci_host_deinit(struct isci_host *); void sci_controller_disable_interrupts(struct isci_host *ihost); bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost); void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status); enum sci_status sci_controller_start_io( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_task_status sci_controller_start_task( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status sci_controller_terminate_request( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status sci_controller_complete_io( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); void sci_port_configuration_agent_construct( struct sci_port_configuration_agent *port_agent); enum sci_status sci_port_configuration_agent_initialize( struct isci_host *ihost, struct sci_port_configuration_agent *port_agent); int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index, u8 reg_count, u8 *write_data); #endif