/* Copyright (C) 2010 Ivo van Doorn Copyright (C) 2009 Bartlomiej Zolnierkiewicz Copyright (C) 2009 Gertjan van Wingerde Based on the original rt2800pci.c and rt2800usb.c. Copyright (C) 2009 Alban Browaeys Copyright (C) 2009 Felix Fietkau Copyright (C) 2009 Luis Correia Copyright (C) 2009 Mattias Nissler Copyright (C) 2009 Mark Asselstine Copyright (C) 2009 Xose Vazquez Perez This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Module: rt2800lib Abstract: rt2800 generic device routines. */ #include #include #include #include "rt2x00.h" #include "rt2800lib.h" #include "rt2800.h" /* * Register access. * All access to the CSR registers will go through the methods * rt2800_register_read and rt2800_register_write. * BBP and RF register require indirect register access, * and use the CSR registers BBPCSR and RFCSR to achieve this. * These indirect registers work with busy bits, * and we will try maximal REGISTER_BUSY_COUNT times to access * the register while taking a REGISTER_BUSY_DELAY us delay * between each attampt. When the busy bit is still set at that time, * the access attempt is considered to have failed, * and we will print an error. * The _lock versions must be used if you already hold the csr_mutex */ #define WAIT_FOR_BBP(__dev, __reg) \ rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) #define WAIT_FOR_RFCSR(__dev, __reg) \ rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) #define WAIT_FOR_RF(__dev, __reg) \ rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) #define WAIT_FOR_MCU(__dev, __reg) \ rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \ H2M_MAILBOX_CSR_OWNER, (__reg)) static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev) { /* check for rt2872 on SoC */ if (!rt2x00_is_soc(rt2x00dev) || !rt2x00_rt(rt2x00dev, RT2872)) return false; /* we know for sure that these rf chipsets are used on rt305x boards */ if (rt2x00_rf(rt2x00dev, RF3020) || rt2x00_rf(rt2x00dev, RF3021) || rt2x00_rf(rt2x00dev, RF3022)) return true; NOTICE(rt2x00dev, "Unknown RF chipset on rt305x\n"); return false; } static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u32 reg; mutex_lock(&rt2x00dev->csr_mutex); /* * Wait until the BBP becomes available, afterwards we * can safely write the new data into the register. */ if (WAIT_FOR_BBP(rt2x00dev, ®)) { reg = 0; rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); } mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, const unsigned int word, u8 *value) { u32 reg; mutex_lock(&rt2x00dev->csr_mutex); /* * Wait until the BBP becomes available, afterwards we * can safely write the read request into the register. * After the data has been written, we wait until hardware * returns the correct value, if at any time the register * doesn't become available in time, reg will be 0xffffffff * which means we return 0xff to the caller. */ if (WAIT_FOR_BBP(rt2x00dev, ®)) { reg = 0; rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); WAIT_FOR_BBP(rt2x00dev, ®); } *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u32 reg; mutex_lock(&rt2x00dev->csr_mutex); /* * Wait until the RFCSR becomes available, afterwards we * can safely write the new data into the register. */ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { reg = 0; rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); } mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, const unsigned int word, u8 *value) { u32 reg; mutex_lock(&rt2x00dev->csr_mutex); /* * Wait until the RFCSR becomes available, afterwards we * can safely write the read request into the register. * After the data has been written, we wait until hardware * returns the correct value, if at any time the register * doesn't become available in time, reg will be 0xffffffff * which means we return 0xff to the caller. */ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { reg = 0; rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); WAIT_FOR_RFCSR(rt2x00dev, ®); } *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; mutex_lock(&rt2x00dev->csr_mutex); /* * Wait until the RF becomes available, afterwards we * can safely write the new data into the register. */ if (WAIT_FOR_RF(rt2x00dev, ®)) { reg = 0; rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); rt2x00_rf_write(rt2x00dev, word, value); } mutex_unlock(&rt2x00dev->csr_mutex); } void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) { u32 reg; /* * SOC devices don't support MCU requests. */ if (rt2x00_is_soc(rt2x00dev)) return; mutex_lock(&rt2x00dev->csr_mutex); /* * Wait until the MCU becomes available, afterwards we * can safely write the new data into the register. */ if (WAIT_FOR_MCU(rt2x00dev, ®)) { rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); reg = 0; rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); } mutex_unlock(&rt2x00dev->csr_mutex); } EXPORT_SYMBOL_GPL(rt2800_mcu_request); int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; u32 reg; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) return 0; msleep(1); } ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); return -EACCES; } EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready); void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc) { u32 word; /* * Initialize TX Info descriptor */ rt2x00_desc_read(txwi, 0, &word); rt2x00_set_field32(&word, TXWI_W0_FRAG, test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); rt2x00_set_field32(&word, TXWI_W0_TS, test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_AMPDU, test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop); rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); rt2x00_set_field32(&word, TXWI_W0_BW, test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); rt2x00_desc_write(txwi, 0, word); rt2x00_desc_read(txwi, 1, &word); rt2x00_set_field32(&word, TXWI_W1_ACK, test_bit(ENTRY_TXD_ACK, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W1_NSEQ, test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, txdesc->length); rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->queue + 1); rt2x00_desc_write(txwi, 1, word); /* * Always write 0 to IV/EIV fields, hardware will insert the IV * from the IVEIV register when TXD_W3_WIV is set to 0. * When TXD_W3_WIV is set to 1 it will use the IV data * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which * crypto entry in the registers should be used to encrypt the frame. */ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); } EXPORT_SYMBOL_GPL(rt2800_write_txwi); void rt2800_process_rxwi(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc) { __le32 *rxwi = (__le32 *) skb->data; u32 word; rt2x00_desc_read(rxwi, 0, &word); rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF); rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); rt2x00_desc_read(rxwi, 1, &word); if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI)) rxdesc->flags |= RX_FLAG_SHORT_GI; if (rt2x00_get_field32(word, RXWI_W1_BW)) rxdesc->flags |= RX_FLAG_40MHZ; /* * Detect RX rate, always use MCS as signal type. */ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS); rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE); /* * Mask of 0x8 bit to remove the short preamble flag. */ if (rxdesc->rate_mode == RATE_MODE_CCK) rxdesc->signal &= ~0x8; rt2x00_desc_read(rxwi, 2, &word); rxdesc->rssi = (rt2x00_get_field32(word, RXWI_W2_RSSI0) + rt2x00_get_field32(word, RXWI_W2_RSSI1)) / 2; /* * Remove RXWI descriptor from start of buffer. */ skb_pull(skb, RXWI_DESC_SIZE); } EXPORT_SYMBOL_GPL(rt2800_process_rxwi); void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Add space for the TXWI in front of the skb. */ skb_push(entry->skb, TXWI_DESC_SIZE); memset(entry->skb, 0, TXWI_DESC_SIZE); /* * Register descriptor details in skb frame descriptor. */ skbdesc->flags |= SKBDESC_DESC_IN_SKB; skbdesc->desc = entry->skb->data; skbdesc->desc_len = TXWI_DESC_SIZE; /* * Add the TXWI for the beacon to the skb. */ rt2800_write_txwi((__le32 *)entry->skb->data, txdesc); /* * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); /* * Write entire beacon with TXWI to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data, entry->skb->len); /* * Enable beaconing again. */ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Clean up beacon skb. */ dev_kfree_skb_any(entry->skb); entry->skb = NULL; } EXPORT_SYMBOL(rt2800_write_beacon); #ifdef CONFIG_RT2X00_LIB_DEBUGFS const struct rt2x00debug rt2800_rt2x00debug = { .owner = THIS_MODULE, .csr = { .read = rt2800_register_read, .write = rt2800_register_write, .flags = RT2X00DEBUGFS_OFFSET, .word_base = CSR_REG_BASE, .word_size = sizeof(u32), .word_count = CSR_REG_SIZE / sizeof(u32), }, .eeprom = { .read = rt2x00_eeprom_read, .write = rt2x00_eeprom_write, .word_base = EEPROM_BASE, .word_size = sizeof(u16), .word_count = EEPROM_SIZE / sizeof(u16), }, .bbp = { .read = rt2800_bbp_read, .write = rt2800_bbp_write, .word_base = BBP_BASE, .word_size = sizeof(u8), .word_count = BBP_SIZE / sizeof(u8), }, .rf = { .read = rt2x00_rf_read, .write = rt2800_rf_write, .word_base = RF_BASE, .word_size = sizeof(u32), .word_count = RF_SIZE / sizeof(u32), }, }; EXPORT_SYMBOL_GPL(rt2800_rt2x00debug); #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev) { u32 reg; rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); } EXPORT_SYMBOL_GPL(rt2800_rfkill_poll); #ifdef CONFIG_RT2X00_LIB_LEDS static void rt2800_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { struct rt2x00_led *led = container_of(led_cdev, struct rt2x00_led, led_dev); unsigned int enabled = brightness != LED_OFF; unsigned int bg_mode = (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); unsigned int polarity = rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, EEPROM_FREQ_LED_POLARITY); unsigned int ledmode = rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, EEPROM_FREQ_LED_MODE); if (led->type == LED_TYPE_RADIO) { rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, enabled ? 0x20 : 0); } else if (led->type == LED_TYPE_ASSOC) { rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); } else if (led->type == LED_TYPE_QUALITY) { /* * The brightness is divided into 6 levels (0 - 5), * The specs tell us the following levels: * 0, 1 ,3, 7, 15, 31 * to determine the level in a simple way we can simply * work with bitshifting: * (1 << level) - 1 */ rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, (1 << brightness / (LED_FULL / 6)) - 1, polarity); } } static int rt2800_blink_set(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off) { struct rt2x00_led *led = container_of(led_cdev, struct rt2x00_led, led_dev); u32 reg; rt2800_register_read(led->rt2x00dev, LED_CFG, ®); rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); rt2800_register_write(led->rt2x00dev, LED_CFG, reg); return 0; } static void rt2800_init_led(struct rt2x00_dev *rt2x00dev, struct rt2x00_led *led, enum led_type type) { led->rt2x00dev = rt2x00dev; led->type = type; led->led_dev.brightness_set = rt2800_brightness_set; led->led_dev.blink_set = rt2800_blink_set; led->flags = LED_INITIALIZED; } #endif /* CONFIG_RT2X00_LIB_LEDS */ /* * Configuration handlers. */ static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_crypto *crypto, struct ieee80211_key_conf *key) { struct mac_wcid_entry wcid_entry; struct mac_iveiv_entry iveiv_entry; u32 offset; u32 reg; offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); if (crypto->cmd == SET_KEY) { rt2800_register_read(rt2x00dev, offset, ®); rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); /* * Both the cipher as the BSS Idx numbers are split in a main * value of 3 bits, and a extended field for adding one additional * bit to the value. */ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, (crypto->cipher & 0x7)); rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER_EXT, (crypto->cipher & 0x8) >> 3); rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, (crypto->bssidx & 0x7)); rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT, (crypto->bssidx & 0x8) >> 3); rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); rt2800_register_write(rt2x00dev, offset, reg); } else { rt2800_register_write(rt2x00dev, offset, 0); } offset = MAC_IVEIV_ENTRY(key->hw_key_idx); memset(&iveiv_entry, 0, sizeof(iveiv_entry)); if ((crypto->cipher == CIPHER_TKIP) || (crypto->cipher == CIPHER_TKIP_NO_MIC) || (crypto->cipher == CIPHER_AES)) iveiv_entry.iv[3] |= 0x20; iveiv_entry.iv[3] |= key->keyidx << 6; rt2800_register_multiwrite(rt2x00dev, offset, &iveiv_entry, sizeof(iveiv_entry)); offset = MAC_WCID_ENTRY(key->hw_key_idx); memset(&wcid_entry, 0, sizeof(wcid_entry)); if (crypto->cmd == SET_KEY) memcpy(&wcid_entry, crypto->address, ETH_ALEN); rt2800_register_multiwrite(rt2x00dev, offset, &wcid_entry, sizeof(wcid_entry)); } int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_crypto *crypto, struct ieee80211_key_conf *key) { struct hw_key_entry key_entry; struct rt2x00_field32 field; u32 offset; u32 reg; if (crypto->cmd == SET_KEY) { key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; memcpy(key_entry.key, crypto->key, sizeof(key_entry.key)); memcpy(key_entry.tx_mic, crypto->tx_mic, sizeof(key_entry.tx_mic)); memcpy(key_entry.rx_mic, crypto->rx_mic, sizeof(key_entry.rx_mic)); offset = SHARED_KEY_ENTRY(key->hw_key_idx); rt2800_register_multiwrite(rt2x00dev, offset, &key_entry, sizeof(key_entry)); } /* * The cipher types are stored over multiple registers * starting with SHARED_KEY_MODE_BASE each word will have * 32 bits and contains the cipher types for 2 bssidx each. * Using the correct defines correctly will cause overhead, * so just calculate the correct offset. */ field.bit_offset = 4 * (key->hw_key_idx % 8); field.bit_mask = 0x7 << field.bit_offset; offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); rt2800_register_read(rt2x00dev, offset, ®); rt2x00_set_field32(®, field, (crypto->cmd == SET_KEY) * crypto->cipher); rt2800_register_write(rt2x00dev, offset, reg); /* * Update WCID information */ rt2800_config_wcid_attr(rt2x00dev, crypto, key); return 0; } EXPORT_SYMBOL_GPL(rt2800_config_shared_key); int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_crypto *crypto, struct ieee80211_key_conf *key) { struct hw_key_entry key_entry; u32 offset; if (crypto->cmd == SET_KEY) { /* * 1 pairwise key is possible per AID, this means that the AID * equals our hw_key_idx. Make sure the WCID starts _after_ the * last possible shared key entry. */ if (crypto->aid > (256 - 32)) return -ENOSPC; key->hw_key_idx = 32 + crypto->aid; memcpy(key_entry.key, crypto->key, sizeof(key_entry.key)); memcpy(key_entry.tx_mic, crypto->tx_mic, sizeof(key_entry.tx_mic)); memcpy(key_entry.rx_mic, crypto->rx_mic, sizeof(key_entry.rx_mic)); offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); rt2800_register_multiwrite(rt2x00dev, offset, &key_entry, sizeof(key_entry)); } /* * Update WCID information */ rt2800_config_wcid_attr(rt2x00dev, crypto, key); return 0; } EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key); void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { u32 reg; /* * Start configuration steps. * Note that the version error will always be dropped * and broadcast frames will always be accepted since * there is no filter for it at this time. */ rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, !(filter_flags & FIF_FCSFAIL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, !(filter_flags & FIF_PLCPFAIL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, !(filter_flags & FIF_PROMISC_IN_BSS)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, !(filter_flags & FIF_ALLMULTI)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, !(filter_flags & FIF_PSPOLL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, !(filter_flags & FIF_CONTROL)); rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); } EXPORT_SYMBOL_GPL(rt2800_config_filter); void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, struct rt2x00intf_conf *conf, const unsigned int flags) { unsigned int beacon_base; u32 reg; if (flags & CONFIG_UPDATE_TYPE) { /* * Clear current synchronisation setup. * For the Beacon base registers we only need to clear * the first byte since that byte contains the VALID and OWNER * bits which (when set to 0) will invalidate the entire beacon. */ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); rt2800_register_write(rt2x00dev, beacon_base, 0); /* * Enable synchronisation. */ rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, (conf->sync == TSF_SYNC_BEACON)); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } if (flags & CONFIG_UPDATE_MAC) { reg = le32_to_cpu(conf->mac[1]); rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); conf->mac[1] = cpu_to_le32(reg); rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, conf->mac, sizeof(conf->mac)); } if (flags & CONFIG_UPDATE_BSSID) { reg = le32_to_cpu(conf->bssid[1]); rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); conf->bssid[1] = cpu_to_le32(reg); rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, conf->bssid, sizeof(conf->bssid)); } } EXPORT_SYMBOL_GPL(rt2800_config_intf); void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp) { u32 reg; rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, !!erp->short_preamble); rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, !!erp->short_preamble); rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, erp->cts_protection ? 2 : 0); rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, erp->basic_rates); rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, erp->beacon_int * 16); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } EXPORT_SYMBOL_GPL(rt2800_config_erp); void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) { u8 r1; u8 r3; rt2800_bbp_read(rt2x00dev, 1, &r1); rt2800_bbp_read(rt2x00dev, 3, &r3); /* * Configure the TX antenna. */ switch ((int)ant->tx) { case 1: rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); break; case 2: rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); break; case 3: /* Do nothing */ break; } /* * Configure the RX antenna. */ switch ((int)ant->rx) { case 1: rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); break; case 2: rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); break; case 3: rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); break; } rt2800_bbp_write(rt2x00dev, 3, r3); rt2800_bbp_write(rt2x00dev, 1, r1); } EXPORT_SYMBOL_GPL(rt2800_config_ant); static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { u16 eeprom; short lna_gain; if (libconf->rf.channel <= 14) { rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); } else if (libconf->rf.channel <= 64) { rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); } else if (libconf->rf.channel <= 128) { rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); } else { rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); } rt2x00dev->lna_gain = lna_gain; } static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, struct rf_channel *rf, struct channel_info *info) { rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); if (rt2x00dev->default_ant.tx == 1) rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); if (rt2x00dev->default_ant.rx == 1) { rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); } else if (rt2x00dev->default_ant.rx == 2) rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); if (rf->channel > 14) { /* * When TX power is below 0, we should increase it by 7 to * make it a positive value (Minumum value is -7). * However this means that values between 0 and 7 have * double meaning, and we should set a 7DBm boost flag. */ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, (info->tx_power1 >= 0)); if (info->tx_power1 < 0) info->tx_power1 += 7; rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, TXPOWER_A_TO_DEV(info->tx_power1)); rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, (info->tx_power2 >= 0)); if (info->tx_power2 < 0) info->tx_power2 += 7; rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, TXPOWER_A_TO_DEV(info->tx_power2)); } else { rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, TXPOWER_G_TO_DEV(info->tx_power1)); rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, TXPOWER_G_TO_DEV(info->tx_power2)); } rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); rt2800_rf_write(rt2x00dev, 1, rf->rf1); rt2800_rf_write(rt2x00dev, 2, rf->rf2); rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); rt2800_rf_write(rt2x00dev, 4, rf->rf4); udelay(200); rt2800_rf_write(rt2x00dev, 1, rf->rf1); rt2800_rf_write(rt2x00dev, 2, rf->rf2); rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); rt2800_rf_write(rt2x00dev, 4, rf->rf4); udelay(200); rt2800_rf_write(rt2x00dev, 1, rf->rf1); rt2800_rf_write(rt2x00dev, 2, rf->rf2); rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); rt2800_rf_write(rt2x00dev, 4, rf->rf4); } static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, struct rf_channel *rf, struct channel_info *info) { u8 rfcsr; rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3); rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2); rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, TXPOWER_G_TO_DEV(info->tx_power1)); rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, TXPOWER_G_TO_DEV(info->tx_power2)); rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); rt2800_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration[conf_is_ht40(conf)]); rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); } static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, struct rf_channel *rf, struct channel_info *info) { u32 reg; unsigned int tx_pin; u8 bbp; if (rt2x00_rf(rt2x00dev, RF2020) || rt2x00_rf(rt2x00dev, RF3020) || rt2x00_rf(rt2x00dev, RF3021) || rt2x00_rf(rt2x00dev, RF3022)) rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info); else rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); /* * Change BBP settings */ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 86, 0); if (rf->channel <= 14) { if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { rt2800_bbp_write(rt2x00dev, 82, 0x62); rt2800_bbp_write(rt2x00dev, 75, 0x46); } else { rt2800_bbp_write(rt2x00dev, 82, 0x84); rt2800_bbp_write(rt2x00dev, 75, 0x50); } } else { rt2800_bbp_write(rt2x00dev, 82, 0xf2); if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) rt2800_bbp_write(rt2x00dev, 75, 0x46); else rt2800_bbp_write(rt2x00dev, 75, 0x50); } rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); rt2x00_set_field32(®, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf)); rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); tx_pin = 0; /* Turn on unused PA or LNA when not using 1T or 1R */ if (rt2x00dev->default_ant.tx != 1) { rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); } /* Turn on unused PA or LNA when not using 1T or 1R */ if (rt2x00dev->default_ant.rx != 1) { rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); } rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); rt2800_bbp_read(rt2x00dev, 4, &bbp); rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); rt2800_bbp_write(rt2x00dev, 4, bbp); rt2800_bbp_read(rt2x00dev, 3, &bbp); rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf)); rt2800_bbp_write(rt2x00dev, 3, bbp); if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { if (conf_is_ht40(conf)) { rt2800_bbp_write(rt2x00dev, 69, 0x1a); rt2800_bbp_write(rt2x00dev, 70, 0x0a); rt2800_bbp_write(rt2x00dev, 73, 0x16); } else { rt2800_bbp_write(rt2x00dev, 69, 0x16); rt2800_bbp_write(rt2x00dev, 70, 0x08); rt2800_bbp_write(rt2x00dev, 73, 0x11); } } msleep(1); } static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, const int txpower) { u32 reg; u32 value = TXPOWER_G_TO_DEV(txpower); u8 r1; rt2800_bbp_read(rt2x00dev, 1, &r1); rt2x00_set_field8(&r1, BBP1_TX_POWER, 0); rt2800_bbp_write(rt2x00dev, 1, r1); rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®); rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg); rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg); rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg); rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg); rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg); } static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { u32 reg; rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, libconf->conf->short_frame_max_tx_count); rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, libconf->conf->long_frame_max_tx_count); rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); } static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { enum dev_state state = (libconf->conf->flags & IEEE80211_CONF_PS) ? STATE_SLEEP : STATE_AWAKE; u32 reg; if (state == STATE_SLEEP) { rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, libconf->conf->listen_interval - 1); rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); } else { rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); } } void rt2800_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { /* Always recalculate LNA gain before changing configuration */ rt2800_config_lna_gain(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2800_config_channel(rt2x00dev, libconf->conf, &libconf->rf, &libconf->channel); if (flags & IEEE80211_CONF_CHANGE_POWER) rt2800_config_txpower(rt2x00dev, libconf->conf->power_level); if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) rt2800_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_PS) rt2800_config_ps(rt2x00dev, libconf); } EXPORT_SYMBOL_GPL(rt2800_config); /* * Link tuning */ void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) { u32 reg; /* * Update FCS error count from register. */ rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); } EXPORT_SYMBOL_GPL(rt2800_link_stats); static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) { if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3390)) return 0x1c + (2 * rt2x00dev->lna_gain); else return 0x2e + rt2x00dev->lna_gain; } if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) return 0x32 + (rt2x00dev->lna_gain * 5) / 3; else return 0x3a + (rt2x00dev->lna_gain * 5) / 3; } static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, u8 vgc_level) { if (qual->vgc_level != vgc_level) { rt2800_bbp_write(rt2x00dev, 66, vgc_level); qual->vgc_level = vgc_level; qual->vgc_level_reg = vgc_level; } } void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) { rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev)); } EXPORT_SYMBOL_GPL(rt2800_reset_tuner); void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, const u32 count) { if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) return; /* * When RSSI is better then -80 increase VGC level with 0x10 */ rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev) + ((qual->rssi > -80) * 0x10)); } EXPORT_SYMBOL_GPL(rt2800_link_tuner); /* * Initialization functions. */ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; u16 eeprom; unsigned int i; int ret; rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); ret = rt2800_drv_init_registers(rt2x00dev); if (ret) return ret; rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®); rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg); rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®); rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg); rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); rt2800_config_filter(rt2x00dev, FIF_ALLMULTI); rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, 9); rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); if (rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3390)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_NIC_DAC_TEST)) rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c); else rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000000f); } else { rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); } } else if (rt2x00_rt(rt2x00dev, RT3070)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c); } else { rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); } } else if (rt2800_is_305x_soc(rt2x00dev)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000001f); } else { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); } rt2800_register_read(rt2x00dev, TX_LINK_CFG, ®); rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg); rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32); rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®); rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) || rt2x00_rt(rt2x00dev, RT2883) || rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E)) rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); else rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg); rt2800_register_read(rt2x00dev, LED_CFG, ®); rt2x00_set_field32(®, LED_CFG_ON_PERIOD, 70); rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, 30); rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); rt2800_register_write(rt2x00dev, LED_CFG, reg); rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, 15); rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, 31); rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, 1); rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, 1); rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3); rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0); rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0); rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1); rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3); rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0); rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0); rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1); rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 0); rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, !rt2x00_is_usb(rt2x00dev)); rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 0); rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 0); rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 0); rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); if (rt2x00_is_usb(rt2x00dev)) { rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006); rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); } rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, IEEE80211_MAX_RTS_THRESHOLD); rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); /* * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS * time should be set to 16. However, the original Ralink driver uses * 16 for both and indeed using a value of 10 for CCK SIFS results in * connection problems with 11g + CTS protection. Hence, use the same * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS. */ rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16); rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16); rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, 314); rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); /* * ASIC will keep garbage value after boot, clear encryption keys. */ for (i = 0; i < 4; i++) rt2800_register_write(rt2x00dev, SHARED_KEY_MODE_ENTRY(i), 0); for (i = 0; i < 256; i++) { u32 wcid[2] = { 0xffffffff, 0x00ffffff }; rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), wcid, sizeof(wcid)); rt2800_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); } /* * Clear all beacons * For the Beacon base registers we only need to clear * the first byte since that byte contains the VALID and OWNER * bits which (when set to 0) will invalidate the entire beacon. */ rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0); rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0); if (rt2x00_is_usb(rt2x00dev)) { rt2800_register_read(rt2x00dev, US_CYC_CNT, ®); rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 30); rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); } rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg); rt2800_register_read(rt2x00dev, HT_FBK_CFG1, ®); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg); rt2800_register_read(rt2x00dev, LG_FBK_CFG0, ®); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg); rt2800_register_read(rt2x00dev, LG_FBK_CFG1, ®); rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg); /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. */ rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); rt2800_register_read(rt2x00dev, RX_STA_CNT1, ®); rt2800_register_read(rt2x00dev, RX_STA_CNT2, ®); rt2800_register_read(rt2x00dev, TX_STA_CNT0, ®); rt2800_register_read(rt2x00dev, TX_STA_CNT1, ®); rt2800_register_read(rt2x00dev, TX_STA_CNT2, ®); return 0; } EXPORT_SYMBOL_GPL(rt2800_init_registers); static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; u32 reg; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ®); if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); return -EACCES; } static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; u8 value; /* * BBP was enabled after firmware was loaded, * but we need to reactivate it now. */ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); msleep(1); for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2800_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; } int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) { unsigned int i; u16 eeprom; u8 reg_id; u8 value; if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) || rt2800_wait_bbp_ready(rt2x00dev))) return -EACCES; if (rt2800_is_305x_soc(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 31, 0x08); rt2800_bbp_write(rt2x00dev, 65, 0x2c); rt2800_bbp_write(rt2x00dev, 66, 0x38); if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { rt2800_bbp_write(rt2x00dev, 69, 0x16); rt2800_bbp_write(rt2x00dev, 73, 0x12); } else { rt2800_bbp_write(rt2x00dev, 69, 0x12); rt2800_bbp_write(rt2x00dev, 73, 0x10); } rt2800_bbp_write(rt2x00dev, 70, 0x0a); if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3390)) { rt2800_bbp_write(rt2x00dev, 79, 0x13); rt2800_bbp_write(rt2x00dev, 80, 0x05); rt2800_bbp_write(rt2x00dev, 81, 0x33); } else if (rt2800_is_305x_soc(rt2x00dev)) { rt2800_bbp_write(rt2x00dev, 78, 0x0e); rt2800_bbp_write(rt2x00dev, 80, 0x08); } else { rt2800_bbp_write(rt2x00dev, 81, 0x37); } rt2800_bbp_write(rt2x00dev, 82, 0x62); rt2800_bbp_write(rt2x00dev, 83, 0x6a); if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D)) rt2800_bbp_write(rt2x00dev, 84, 0x19); else rt2800_bbp_write(rt2x00dev, 84, 0x99); rt2800_bbp_write(rt2x00dev, 86, 0x00); rt2800_bbp_write(rt2x00dev, 91, 0x04); rt2800_bbp_write(rt2x00dev, 92, 0x00); if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) || rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) || rt2800_is_305x_soc(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 103, 0xc0); else rt2800_bbp_write(rt2x00dev, 103, 0x00); if (rt2800_is_305x_soc(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 105, 0x01); else rt2800_bbp_write(rt2x00dev, 105, 0x05); rt2800_bbp_write(rt2x00dev, 106, 0x35); if (rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3390)) { rt2800_bbp_read(rt2x00dev, 138, &value); rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) value |= 0x20; if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) value &= ~0x02; rt2800_bbp_write(rt2x00dev, 138, value); } for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); if (eeprom != 0xffff && eeprom != 0x0000) { reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); rt2800_bbp_write(rt2x00dev, reg_id, value); } } return 0; } EXPORT_SYMBOL_GPL(rt2800_init_bbp); static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40, u8 rfcsr24, u8 filter_target) { unsigned int i; u8 bbp; u8 rfcsr; u8 passband; u8 stopband; u8 overtuned = 0; rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); rt2800_bbp_read(rt2x00dev, 4, &bbp); rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); rt2800_bbp_write(rt2x00dev, 4, bbp); rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); /* * Set power & frequency of passband test tone */ rt2800_bbp_write(rt2x00dev, 24, 0); for (i = 0; i < 100; i++) { rt2800_bbp_write(rt2x00dev, 25, 0x90); msleep(1); rt2800_bbp_read(rt2x00dev, 55, &passband); if (passband) break; } /* * Set power & frequency of stopband test tone */ rt2800_bbp_write(rt2x00dev, 24, 0x06); for (i = 0; i < 100; i++) { rt2800_bbp_write(rt2x00dev, 25, 0x90); msleep(1); rt2800_bbp_read(rt2x00dev, 55, &stopband); if ((passband - stopband) <= filter_target) { rfcsr24++; overtuned += ((passband - stopband) == filter_target); } else break; rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); } rfcsr24 -= !!overtuned; rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); return rfcsr24; } int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { u8 rfcsr; u8 bbp; u32 reg; u16 eeprom; if (!rt2x00_rt(rt2x00dev, RT3070) && !rt2x00_rt(rt2x00dev, RT3071) && !rt2x00_rt(rt2x00dev, RT3090) && !rt2x00_rt(rt2x00dev, RT3390) && !rt2800_is_305x_soc(rt2x00dev)) return 0; /* * Init RF calibration. */ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); msleep(1); rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090)) { rt2800_rfcsr_write(rt2x00dev, 4, 0x40); rt2800_rfcsr_write(rt2x00dev, 5, 0x03); rt2800_rfcsr_write(rt2x00dev, 6, 0x02); rt2800_rfcsr_write(rt2x00dev, 7, 0x70); rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); rt2800_rfcsr_write(rt2x00dev, 10, 0x41); rt2800_rfcsr_write(rt2x00dev, 11, 0x21); rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); rt2800_rfcsr_write(rt2x00dev, 14, 0x90); rt2800_rfcsr_write(rt2x00dev, 15, 0x58); rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); rt2800_rfcsr_write(rt2x00dev, 17, 0x92); rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); rt2800_rfcsr_write(rt2x00dev, 19, 0x02); rt2800_rfcsr_write(rt2x00dev, 20, 0xba); rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); rt2800_rfcsr_write(rt2x00dev, 24, 0x16); rt2800_rfcsr_write(rt2x00dev, 25, 0x01); rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); } else if (rt2x00_rt(rt2x00dev, RT3390)) { rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); rt2800_rfcsr_write(rt2x00dev, 3, 0x62); rt2800_rfcsr_write(rt2x00dev, 4, 0x40); rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); rt2800_rfcsr_write(rt2x00dev, 6, 0x42); rt2800_rfcsr_write(rt2x00dev, 7, 0x34); rt2800_rfcsr_write(rt2x00dev, 8, 0x00); rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); rt2800_rfcsr_write(rt2x00dev, 10, 0x61); rt2800_rfcsr_write(rt2x00dev, 11, 0x21); rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); rt2800_rfcsr_write(rt2x00dev, 14, 0x90); rt2800_rfcsr_write(rt2x00dev, 15, 0x53); rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); rt2800_rfcsr_write(rt2x00dev, 17, 0x94); rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); rt2800_rfcsr_write(rt2x00dev, 22, 0x00); rt2800_rfcsr_write(rt2x00dev, 23, 0x14); rt2800_rfcsr_write(rt2x00dev, 24, 0x08); rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); rt2800_rfcsr_write(rt2x00dev, 26, 0x85); rt2800_rfcsr_write(rt2x00dev, 27, 0x00); rt2800_rfcsr_write(rt2x00dev, 28, 0x41); rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); rt2800_rfcsr_write(rt2x00dev, 30, 0x20); rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); } else if (rt2800_is_305x_soc(rt2x00dev)) { rt2800_rfcsr_write(rt2x00dev, 0, 0x50); rt2800_rfcsr_write(rt2x00dev, 1, 0x01); rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); rt2800_rfcsr_write(rt2x00dev, 3, 0x75); rt2800_rfcsr_write(rt2x00dev, 4, 0x40); rt2800_rfcsr_write(rt2x00dev, 5, 0x03); rt2800_rfcsr_write(rt2x00dev, 6, 0x02); rt2800_rfcsr_write(rt2x00dev, 7, 0x50); rt2800_rfcsr_write(rt2x00dev, 8, 0x39); rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); rt2800_rfcsr_write(rt2x00dev, 10, 0x60); rt2800_rfcsr_write(rt2x00dev, 11, 0x21); rt2800_rfcsr_write(rt2x00dev, 12, 0x75); rt2800_rfcsr_write(rt2x00dev, 13, 0x75); rt2800_rfcsr_write(rt2x00dev, 14, 0x90); rt2800_rfcsr_write(rt2x00dev, 15, 0x58); rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); rt2800_rfcsr_write(rt2x00dev, 17, 0x92); rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); rt2800_rfcsr_write(rt2x00dev, 19, 0x02); rt2800_rfcsr_write(rt2x00dev, 20, 0xba); rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); rt2800_rfcsr_write(rt2x00dev, 22, 0x00); rt2800_rfcsr_write(rt2x00dev, 23, 0x31); rt2800_rfcsr_write(rt2x00dev, 24, 0x08); rt2800_rfcsr_write(rt2x00dev, 25, 0x01); rt2800_rfcsr_write(rt2x00dev, 26, 0x25); rt2800_rfcsr_write(rt2x00dev, 27, 0x23); rt2800_rfcsr_write(rt2x00dev, 28, 0x13); rt2800_rfcsr_write(rt2x00dev, 29, 0x83); rt2800_rfcsr_write(rt2x00dev, 30, 0x00); rt2800_rfcsr_write(rt2x00dev, 31, 0x00); return 0; } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { rt2800_register_read(rt2x00dev, LDO_CFG0, ®); rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); rt2800_register_write(rt2x00dev, LDO_CFG0, reg); } else if (rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090)) { rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1); rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); rt2800_rfcsr_write(rt2x00dev, 31, 0x14); rt2800_register_read(rt2x00dev, LDO_CFG0, ®); rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) { rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_NIC_DAC_TEST)) rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 3); else rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); } rt2800_register_write(rt2x00dev, LDO_CFG0, reg); } else if (rt2x00_rt(rt2x00dev, RT3390)) { rt2800_register_read(rt2x00dev, GPIO_SWITCH, ®); rt2x00_set_field32(®, GPIO_SWITCH_5, 0); rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg); } /* * Set RX Filter calibration for 20MHz and 40MHz */ if (rt2x00_rt(rt2x00dev, RT3070)) { rt2x00dev->calibration[0] = rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16); rt2x00dev->calibration[1] = rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19); } else if (rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3390)) { rt2x00dev->calibration[0] = rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13); rt2x00dev->calibration[1] = rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15); } /* * Set back to initial state */ rt2800_bbp_write(rt2x00dev, 24, 0); rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); /* * set BBP back to BW20 */ rt2800_bbp_read(rt2x00dev, 4, &bbp); rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); rt2800_bbp_write(rt2x00dev, 4, bbp); if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) || rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) rt2800_rfcsr_write(rt2x00dev, 27, 0x03); rt2800_register_read(rt2x00dev, OPT_14_CSR, ®); rt2x00_set_field32(®, OPT_14_CSR_BIT0, 1); rt2800_register_write(rt2x00dev, OPT_14_CSR, reg); rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0); if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) rt2x00_set_field8(&rfcsr, RFCSR17_R, 1); } rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_TXMIXER_GAIN_BG_VAL) >= 1) rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN, rt2x00_get_field16(eeprom, EEPROM_TXMIXER_GAIN_BG_VAL)); rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); if (rt2x00_rt(rt2x00dev, RT3090)) { rt2800_bbp_read(rt2x00dev, 138, &bbp); rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0); if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1); rt2800_bbp_write(rt2x00dev, 138, bbp); } if (rt2x00_rt(rt2x00dev, RT3071) || rt2x00_rt(rt2x00dev, RT3090) || rt2x00_rt(rt2x00dev, RT3390)) { rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1); rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1); rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); rt2800_rfcsr_read(rt2x00dev, 15, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0); rt2800_rfcsr_write(rt2x00dev, 15, rfcsr); rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0); rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0); rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); } if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071)) { rt2800_rfcsr_read(rt2x00dev, 27, &rfcsr); if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) || rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E)) rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3); else rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0); rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0); rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0); rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0); rt2800_rfcsr_write(rt2x00dev, 27, rfcsr); } return 0; } EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) { u32 reg; rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); } EXPORT_SYMBOL_GPL(rt2800_efuse_detect); static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) { u32 reg; mutex_lock(&rt2x00dev->csr_mutex); rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, ®); rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg); /* Wait until the EEPROM has been loaded */ rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); /* Apparently the data is read from end to start */ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, (u32 *)&rt2x00dev->eeprom[i]); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, (u32 *)&rt2x00dev->eeprom[i + 2]); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, (u32 *)&rt2x00dev->eeprom[i + 4]); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, (u32 *)&rt2x00dev->eeprom[i + 6]); mutex_unlock(&rt2x00dev->csr_mutex); } void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { unsigned int i; for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) rt2800_efuse_read(rt2x00dev, i); } EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) { u16 word; u8 *mac; u8 default_lna_gain; /* * Start validation of the data that has been read. */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); if (!is_valid_ether_addr(mac)) { random_ether_addr(mac); EEPROM(rt2x00dev, "MAC: %pM\n", mac); } rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); if (word == 0xffff) { rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); } else if (rt2x00_rt(rt2x00dev, RT2860) || rt2x00_rt(rt2x00dev, RT2872)) { /* * There is a max of 2 RX streams for RT28x0 series */ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); if (word == 0xffff) { rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); if ((word & 0x00ff) == 0x00ff) { rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, LED_MODE_TXRX_ACTIVITY); rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); } /* * During the LNA validation we are going to use * lna0 as correct value. Note that EEPROM_LNA * is never validated. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, default_lna_gain); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, default_lna_gain); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); return 0; } EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) { u32 reg; u16 value; u16 eeprom; /* * Read EEPROM word for configuration. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); /* * Identify RF chipset. */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2800_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET), value, rt2x00_get_field32(reg, MAC_CSR0_REVISION)); if (!rt2x00_rt(rt2x00dev, RT2860) && !rt2x00_rt(rt2x00dev, RT2872) && !rt2x00_rt(rt2x00dev, RT2883) && !rt2x00_rt(rt2x00dev, RT3070) && !rt2x00_rt(rt2x00dev, RT3071) && !rt2x00_rt(rt2x00dev, RT3090) && !rt2x00_rt(rt2x00dev, RT3390) && !rt2x00_rt(rt2x00dev, RT3572)) { ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } if (!rt2x00_rf(rt2x00dev, RF2820) && !rt2x00_rf(rt2x00dev, RF2850) && !rt2x00_rf(rt2x00dev, RF2720) && !rt2x00_rf(rt2x00dev, RF2750) && !rt2x00_rf(rt2x00dev, RF3020) && !rt2x00_rf(rt2x00dev, RF2020) && !rt2x00_rf(rt2x00dev, RF3021) && !rt2x00_rf(rt2x00dev, RF3022) && !rt2x00_rf(rt2x00dev, RF3052)) { ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); return -ENODEV; } /* * Identify default antenna configuration. */ rt2x00dev->default_ant.tx = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); rt2x00dev->default_ant.rx = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); /* * Read frequency offset and RF programming sequence. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); /* * Read external LNA informations. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); /* * Detect if this device has an hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); /* * Store led settings, for correct led behaviour. */ #ifdef CONFIG_RT2X00_LIB_LEDS rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); #endif /* CONFIG_RT2X00_LIB_LEDS */ return 0; } EXPORT_SYMBOL_GPL(rt2800_init_eeprom); /* * RF value list for rt28xx * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) */ static const struct rf_channel rf_vals[] = { { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, /* 802.11 UNI / HyperLan 2 */ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, /* 802.11 HyperLan 2 */ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, /* 802.11 UNII */ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, /* 802.11 Japan */ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, }; /* * RF value list for rt3xxx * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052) */ static const struct rf_channel rf_vals_3x[] = { {1, 241, 2, 2 }, {2, 241, 2, 7 }, {3, 242, 2, 2 }, {4, 242, 2, 7 }, {5, 243, 2, 2 }, {6, 243, 2, 7 }, {7, 244, 2, 2 }, {8, 244, 2, 7 }, {9, 245, 2, 2 }, {10, 245, 2, 7 }, {11, 246, 2, 2 }, {12, 246, 2, 7 }, {13, 247, 2, 2 }, {14, 248, 2, 4 }, /* 802.11 UNI / HyperLan 2 */ {36, 0x56, 0, 4}, {38, 0x56, 0, 6}, {40, 0x56, 0, 8}, {44, 0x57, 0, 0}, {46, 0x57, 0, 2}, {48, 0x57, 0, 4}, {52, 0x57, 0, 8}, {54, 0x57, 0, 10}, {56, 0x58, 0, 0}, {60, 0x58, 0, 4}, {62, 0x58, 0, 6}, {64, 0x58, 0, 8}, /* 802.11 HyperLan 2 */ {100, 0x5b, 0, 8}, {102, 0x5b, 0, 10}, {104, 0x5c, 0, 0}, {108, 0x5c, 0, 4}, {110, 0x5c, 0, 6}, {112, 0x5c, 0, 8}, {116, 0x5d, 0, 0}, {118, 0x5d, 0, 2}, {120, 0x5d, 0, 4}, {124, 0x5d, 0, 8}, {126, 0x5d, 0, 10}, {128, 0x5e, 0, 0}, {132, 0x5e, 0, 4}, {134, 0x5e, 0, 6}, {136, 0x5e, 0, 8}, {140, 0x5f, 0, 0}, /* 802.11 UNII */ {149, 0x5f, 0, 9}, {151, 0x5f, 0, 11}, {153, 0x60, 0, 1}, {157, 0x60, 0, 5}, {159, 0x60, 0, 7}, {161, 0x60, 0, 9}, {165, 0x61, 0, 1}, {167, 0x61, 0, 3}, {169, 0x61, 0, 5}, {171, 0x61, 0, 7}, {173, 0x61, 0, 9}, }; int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; char *tx_power1; char *tx_power2; unsigned int i; u16 eeprom; /* * Disable powersaving as default on PCI devices. */ if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; /* * Initialize all hw fields. */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_AMPDU_AGGREGATION; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); /* * As rt2800 has a global fallback table we cannot specify * more then one tx rate per frame but since the hw will * try several rates (based on the fallback table) we should * still initialize max_rates to the maximum number of rates * we are going to try. Otherwise mac80211 will truncate our * reported tx rates and the rc algortihm will end up with * incorrect data. */ rt2x00dev->hw->max_rates = 7; rt2x00dev->hw->max_rate_tries = 1; rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; if (rt2x00_rf(rt2x00dev, RF2820) || rt2x00_rf(rt2x00dev, RF2720)) { spec->num_channels = 14; spec->channels = rf_vals; } else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals); spec->channels = rf_vals; } else if (rt2x00_rf(rt2x00dev, RF3020) || rt2x00_rf(rt2x00dev, RF2020) || rt2x00_rf(rt2x00dev, RF3021) || rt2x00_rf(rt2x00dev, RF3022)) { spec->num_channels = 14; spec->channels = rf_vals_3x; } else if (rt2x00_rf(rt2x00dev, RF3052)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_3x); spec->channels = rf_vals_3x; } /* * Initialize HT information. */ if (!rt2x00_rf(rt2x00dev, RF2020)) spec->ht.ht_supported = true; else spec->ht.ht_supported = false; spec->ht.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_RX_STBC; if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) >= 2) spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC; spec->ht.ampdu_factor = 3; spec->ht.ampdu_density = 4; spec->ht.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED | IEEE80211_HT_MCS_TX_RX_DIFF | ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { case 3: spec->ht.mcs.rx_mask[2] = 0xff; case 2: spec->ht.mcs.rx_mask[1] = 0xff; case 1: spec->ht.mcs.rx_mask[0] = 0xff; spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ break; } /* * Create channel information array */ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; spec->channels_info = info; tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); for (i = 0; i < 14; i++) { info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); } if (spec->num_channels > 14) { tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); for (i = 14; i < spec->num_channels; i++) { info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); } } return 0; } EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode); /* * IEEE80211 stack callback functions. */ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32, u16 *iv16) { struct rt2x00_dev *rt2x00dev = hw->priv; struct mac_iveiv_entry iveiv_entry; u32 offset; offset = MAC_IVEIV_ENTRY(hw_key_idx); rt2800_register_multiread(rt2x00dev, offset, &iveiv_entry, sizeof(iveiv_entry)); memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16)); memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32)); } static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) { struct rt2x00_dev *rt2x00dev = hw->priv; u32 reg; bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); return 0; } static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; struct data_queue *queue; struct rt2x00_field32 field; int retval; u32 reg; u32 offset; /* * First pass the configuration through rt2x00lib, that will * update the queue settings and validate the input. After that * we are free to update the registers based on the value * in the queue parameter. */ retval = rt2x00mac_conf_tx(hw, queue_idx, params); if (retval) return retval; /* * We only need to perform additional register initialization * for WMM queues/ */ if (queue_idx >= 4) return 0; queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); /* Update WMM TXOP register */ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); field.bit_offset = (queue_idx & 1) * 16; field.bit_mask = 0xffff << field.bit_offset; rt2800_register_read(rt2x00dev, offset, ®); rt2x00_set_field32(®, field, queue->txop); rt2800_register_write(rt2x00dev, offset, reg); /* Update WMM registers */ field.bit_offset = queue_idx * 4; field.bit_mask = 0xf << field.bit_offset; rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); rt2x00_set_field32(®, field, queue->aifs); rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); rt2x00_set_field32(®, field, queue->cw_min); rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); rt2x00_set_field32(®, field, queue->cw_max); rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); /* Update EDCA registers */ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); rt2800_register_read(rt2x00dev, offset, ®); rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); rt2800_register_write(rt2x00dev, offset, reg); return 0; } static u64 rt2800_get_tsf(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; u64 tsf; u32 reg; rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, ®); tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, ®); tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); return tsf; } static int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn) { struct rt2x00_dev *rt2x00dev = hw->priv; int ret = 0; switch (action) { case IEEE80211_AMPDU_RX_START: case IEEE80211_AMPDU_RX_STOP: /* we don't support RX aggregation yet */ ret = -ENOTSUPP; break; case IEEE80211_AMPDU_TX_START: ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_STOP: ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_OPERATIONAL: break; default: WARNING(rt2x00dev, "Unknown AMPDU action\n"); } return ret; } const struct ieee80211_ops rt2800_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, .stop = rt2x00mac_stop, .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .configure_filter = rt2x00mac_configure_filter, .set_tim = rt2x00mac_set_tim, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .get_tkip_seq = rt2800_get_tkip_seq, .set_rts_threshold = rt2800_set_rts_threshold, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2800_conf_tx, .get_tsf = rt2800_get_tsf, .rfkill_poll = rt2x00mac_rfkill_poll, .ampdu_action = rt2800_ampdu_action, }; EXPORT_SYMBOL_GPL(rt2800_mac80211_ops); MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz"); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("Ralink RT2800 library"); MODULE_LICENSE("GPL");