/* Driver for the Marvell 8385 based compact flash WLAN cards. (C) 2007 by Holger Schurig This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, Boston, MA 02110-1301, USA. */ #include #include #include #include #include #include #include #include #include #include #define DRV_NAME "libertas_cs" #include "decl.h" #include "defs.h" #include "dev.h" /********************************************************************/ /* Module stuff */ /********************************************************************/ MODULE_AUTHOR("Holger Schurig "); MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards"); MODULE_LICENSE("GPL"); /********************************************************************/ /* Data structures */ /********************************************************************/ struct if_cs_card { struct pcmcia_device *p_dev; wlan_private *priv; void __iomem *iobase; }; /********************************************************************/ /* Hardware access */ /********************************************************************/ /* This define enables wrapper functions which allow you to dump all register accesses. You normally won't this, except for development */ /* #define DEBUG_IO */ #ifdef DEBUG_IO static int debug_output = 0; #else /* This way the compiler optimizes the printk's away */ #define debug_output 0 #endif static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg) { unsigned int val = ioread8(card->iobase + reg); if (debug_output) printk(KERN_INFO "##inb %08x<%02x\n", reg, val); return val; } static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg) { unsigned int val = ioread16(card->iobase + reg); if (debug_output) printk(KERN_INFO "##inw %08x<%04x\n", reg, val); return val; } static inline void if_cs_read16_rep( struct if_cs_card *card, uint reg, void *buf, unsigned long count) { if (debug_output) printk(KERN_INFO "##insw %08x<(0x%lx words)\n", reg, count); ioread16_rep(card->iobase + reg, buf, count); } static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val) { if (debug_output) printk(KERN_INFO "##outb %08x>%02x\n", reg, val); iowrite8(val, card->iobase + reg); } static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val) { if (debug_output) printk(KERN_INFO "##outw %08x>%04x\n", reg, val); iowrite16(val, card->iobase + reg); } static inline void if_cs_write16_rep( struct if_cs_card *card, uint reg, void *buf, unsigned long count) { if (debug_output) printk(KERN_INFO "##outsw %08x>(0x%lx words)\n", reg, count); iowrite16_rep(card->iobase + reg, buf, count); } /* * I know that polling/delaying is frowned upon. However, this procedure * with polling is needed while downloading the firmware. At this stage, * the hardware does unfortunately not create any interrupts. * * Fortunately, this function is never used once the firmware is in * the card. :-) * * As a reference, see the "Firmware Specification v5.1", page 18 * and 19. I did not follow their suggested timing to the word, * but this works nice & fast anyway. */ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg) { int i; for (i = 0; i < 1000; i++) { u8 val = if_cs_read8(card, addr); if (val == reg) return i; udelay(500); } return -ETIME; } /* Host control registers and their bit definitions */ #define IF_CS_H_STATUS 0x00000000 #define IF_CS_H_STATUS_TX_OVER 0x0001 #define IF_CS_H_STATUS_RX_OVER 0x0002 #define IF_CS_H_STATUS_DNLD_OVER 0x0004 #define IF_CS_H_INT_CAUSE 0x00000002 #define IF_CS_H_IC_TX_OVER 0x0001 #define IF_CS_H_IC_RX_OVER 0x0002 #define IF_CS_H_IC_DNLD_OVER 0x0004 #define IF_CS_H_IC_POWER_DOWN 0x0008 #define IF_CS_H_IC_HOST_EVENT 0x0010 #define IF_CS_H_IC_MASK 0x001f #define IF_CS_H_INT_MASK 0x00000004 #define IF_CS_H_IM_MASK 0x001f #define IF_CS_H_WRITE_LEN 0x00000014 #define IF_CS_H_WRITE 0x00000016 #define IF_CS_H_CMD_LEN 0x00000018 #define IF_CS_H_CMD 0x0000001A #define IF_CS_C_READ_LEN 0x00000024 #define IF_CS_H_READ 0x00000010 /* Card control registers and their bit definitions */ #define IF_CS_C_STATUS 0x00000020 #define IF_CS_C_S_TX_DNLD_RDY 0x0001 #define IF_CS_C_S_RX_UPLD_RDY 0x0002 #define IF_CS_C_S_CMD_DNLD_RDY 0x0004 #define IF_CS_C_S_CMD_UPLD_RDY 0x0008 #define IF_CS_C_S_CARDEVENT 0x0010 #define IF_CS_C_S_MASK 0x001f #define IF_CS_C_S_STATUS_MASK 0x7f00 /* The following definitions should be the same as the MRVDRV_ ones */ #if MRVDRV_CMD_DNLD_RDY != IF_CS_C_S_CMD_DNLD_RDY #error MRVDRV_CMD_DNLD_RDY and IF_CS_C_S_CMD_DNLD_RDY not in sync #endif #if MRVDRV_CMD_UPLD_RDY != IF_CS_C_S_CMD_UPLD_RDY #error MRVDRV_CMD_UPLD_RDY and IF_CS_C_S_CMD_UPLD_RDY not in sync #endif #if MRVDRV_CARDEVENT != IF_CS_C_S_CARDEVENT #error MRVDRV_CARDEVENT and IF_CS_C_S_CARDEVENT not in sync #endif #define IF_CS_C_INT_CAUSE 0x00000022 #define IF_CS_C_IC_MASK 0x001f #define IF_CS_C_SQ_READ_LOW 0x00000028 #define IF_CS_C_SQ_HELPER_OK 0x10 #define IF_CS_C_CMD_LEN 0x00000030 #define IF_CS_C_CMD 0x00000012 #define IF_CS_SCRATCH 0x0000003F /********************************************************************/ /* Interrupts */ /********************************************************************/ static inline void if_cs_enable_ints(struct if_cs_card *card) { lbs_deb_enter(LBS_DEB_CS); if_cs_write16(card, IF_CS_H_INT_MASK, 0); } static inline void if_cs_disable_ints(struct if_cs_card *card) { lbs_deb_enter(LBS_DEB_CS); if_cs_write16(card, IF_CS_H_INT_MASK, IF_CS_H_IM_MASK); } static irqreturn_t if_cs_interrupt(int irq, void *data) { struct if_cs_card *card = data; u16 int_cause; lbs_deb_enter(LBS_DEB_CS); int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE); if(int_cause == 0x0) { /* Not for us */ return IRQ_NONE; } else if(int_cause == 0xffff) { /* Read in junk, the card has probably been removed */ card->priv->adapter->surpriseremoved = 1; } else { if(int_cause & IF_CS_H_IC_TX_OVER) { card->priv->dnld_sent = DNLD_RES_RECEIVED; if (!card->priv->adapter->cur_cmd) wake_up_interruptible(&card->priv->waitq); if (card->priv->adapter->connect_status == LIBERTAS_CONNECTED) netif_wake_queue(card->priv->dev); } /* clear interrupt */ if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause & IF_CS_C_IC_MASK); } libertas_interrupt(card->priv->dev); return IRQ_HANDLED; } /********************************************************************/ /* I/O */ /********************************************************************/ /* * Called from if_cs_host_to_card to send a command to the hardware */ static int if_cs_send_cmd(wlan_private *priv, u8 *buf, u16 nb) { struct if_cs_card *card = (struct if_cs_card *)priv->card; int ret = -1; int loops = 0; lbs_deb_enter(LBS_DEB_CS); /* Is hardware ready? */ while (1) { u16 val = if_cs_read16(card, IF_CS_C_STATUS); if (val & IF_CS_C_S_CMD_DNLD_RDY) break; if (++loops > 100) { lbs_pr_err("card not ready for commands\n"); goto done; } mdelay(1); } if_cs_write16(card, IF_CS_H_CMD_LEN, nb); if_cs_write16_rep(card, IF_CS_H_CMD, buf, nb / 2); /* Are we supposed to transfer an odd amount of bytes? */ if (nb & 1) if_cs_write8(card, IF_CS_H_CMD, buf[nb-1]); /* "Assert the download over interrupt command in the Host * status register" */ if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER); /* "Assert the download over interrupt command in the Card * interrupt case register" */ if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER); ret = 0; done: lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); return ret; } /* * Called from if_cs_host_to_card to send a data to the hardware */ static void if_cs_send_data(wlan_private *priv, u8 *buf, u16 nb) { struct if_cs_card *card = (struct if_cs_card *)priv->card; lbs_deb_enter(LBS_DEB_CS); if_cs_write16(card, IF_CS_H_WRITE_LEN, nb); /* write even number of bytes, then odd byte if necessary */ if_cs_write16_rep(card, IF_CS_H_WRITE, buf, nb / 2); if (nb & 1) if_cs_write8(card, IF_CS_H_WRITE, buf[nb-1]); if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_TX_OVER); if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_STATUS_TX_OVER); lbs_deb_leave(LBS_DEB_CS); } /* * Get the command result out of the card. */ static int if_cs_receive_cmdres(wlan_private *priv, u8* data, u32 *len) { int ret = -1; u16 val; lbs_deb_enter(LBS_DEB_CS); /* is hardware ready? */ val = if_cs_read16(priv->card, IF_CS_C_STATUS); if ((val & IF_CS_C_S_CMD_UPLD_RDY) == 0) { lbs_pr_err("card not ready for CMD\n"); goto out; } *len = if_cs_read16(priv->card, IF_CS_C_CMD_LEN); if ((*len == 0) || (*len > MRVDRV_SIZE_OF_CMD_BUFFER)) { lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len); goto out; } /* read even number of bytes, then odd byte if necessary */ if_cs_read16_rep(priv->card, IF_CS_C_CMD, data, *len/sizeof(u16)); if (*len & 1) data[*len-1] = if_cs_read8(priv->card, IF_CS_C_CMD); ret = 0; out: lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len); return ret; } static struct sk_buff *if_cs_receive_data(wlan_private *priv) { struct sk_buff *skb = NULL; u16 len; u8 *data; lbs_deb_enter(LBS_DEB_CS); len = if_cs_read16(priv->card, IF_CS_C_READ_LEN); if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) { lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len); priv->stats.rx_dropped++; printk(KERN_INFO "##HS %s:%d TODO\n", __FUNCTION__, __LINE__); goto dat_err; } //TODO: skb = dev_alloc_skb(len+ETH_FRAME_LEN+MRVDRV_SNAP_HEADER_LEN+EXTRA_LEN); skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + 2); if (!skb) goto out; skb_put(skb, len); skb_reserve(skb, 2);/* 16 byte align */ data = skb->data; /* read even number of bytes, then odd byte if necessary */ if_cs_read16_rep(priv->card, IF_CS_H_READ, data, len/sizeof(u16)); if (len & 1) data[len-1] = if_cs_read8(priv->card, IF_CS_H_READ); dat_err: if_cs_write16(priv->card, IF_CS_H_STATUS, IF_CS_H_STATUS_RX_OVER); if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_RX_OVER); out: lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb); return skb; } /********************************************************************/ /* Firmware */ /********************************************************************/ /* * Tries to program the helper firmware. * * Return 0 on success */ static int if_cs_prog_helper(struct if_cs_card *card) { int ret = 0; int sent = 0; u8 scratch; const struct firmware *fw; lbs_deb_enter(LBS_DEB_CS); scratch = if_cs_read8(card, IF_CS_SCRATCH); /* "If the value is 0x5a, the firmware is already * downloaded successfully" */ if (scratch == 0x5a) goto done; /* "If the value is != 00, it is invalid value of register */ if (scratch != 0x00) { ret = -ENODEV; goto done; } /* TODO: make firmware file configurable */ ret = request_firmware(&fw, "libertas_cs_helper.fw", &handle_to_dev(card->p_dev)); if (ret) { lbs_pr_err("can't load helper firmware\n"); ret = -ENODEV; goto done; } lbs_deb_cs("helper size %td\n", fw->size); /* "Set the 5 bytes of the helper image to 0" */ /* Not needed, this contains an ARM branch instruction */ for (;;) { /* "the number of bytes to send is 256" */ int count = 256; int remain = fw->size - sent; if (remain < count) count = remain; /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n", __LINE__, sent, fw->size); */ /* "write the number of bytes to be sent to the I/O Command * write length register" */ if_cs_write16(card, IF_CS_H_CMD_LEN, count); /* "write this to I/O Command port register as 16 bit writes */ if (count) if_cs_write16_rep(card, IF_CS_H_CMD, &fw->data[sent], count >> 1); /* "Assert the download over interrupt command in the Host * status register" */ if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER); /* "Assert the download over interrupt command in the Card * interrupt case register" */ if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER); /* "The host polls the Card Status register ... for 50 ms before declaring a failure */ ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS, IF_CS_C_S_CMD_DNLD_RDY); if (ret < 0) { lbs_pr_err("can't download helper at 0x%x, ret %d\n", sent, ret); goto done; } if (count == 0) break; sent += count; } release_firmware(fw); ret = 0; done: lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); return ret; } static int if_cs_prog_real(struct if_cs_card *card) { const struct firmware *fw; int ret = 0; int retry = 0; int len = 0; int sent; lbs_deb_enter(LBS_DEB_CS); /* TODO: make firmware file configurable */ ret = request_firmware(&fw, "libertas_cs.fw", &handle_to_dev(card->p_dev)); if (ret) { lbs_pr_err("can't load firmware\n"); ret = -ENODEV; goto done; } lbs_deb_cs("fw size %td\n", fw->size); ret = if_cs_poll_while_fw_download(card, IF_CS_C_SQ_READ_LOW, IF_CS_C_SQ_HELPER_OK); if (ret < 0) { int i; lbs_pr_err("helper firmware doesn't answer\n"); for (i = 0; i < 0x50; i += 2) printk(KERN_INFO "## HS %02x: %04x\n", i, if_cs_read16(card, i)); goto err_release; } for (sent = 0; sent < fw->size; sent += len) { len = if_cs_read16(card, IF_CS_C_SQ_READ_LOW); /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n", __LINE__, sent, fw->size); */ if (len & 1) { retry++; lbs_pr_info("odd, need to retry this firmware block\n"); } else { retry = 0; } if (retry > 20) { lbs_pr_err("could not download firmware\n"); ret = -ENODEV; goto err_release; } if (retry) { sent -= len; } if_cs_write16(card, IF_CS_H_CMD_LEN, len); if_cs_write16_rep(card, IF_CS_H_CMD, &fw->data[sent], (len+1) >> 1); if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER); if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER); ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS, IF_CS_C_S_CMD_DNLD_RDY); if (ret < 0) { lbs_pr_err("can't download firmware at 0x%x\n", sent); goto err_release; } } ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a); if (ret < 0) { lbs_pr_err("firmware download failed\n"); goto err_release; } ret = 0; goto done; err_release: release_firmware(fw); done: lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); return ret; } /********************************************************************/ /* Callback functions for libertas.ko */ /********************************************************************/ /* Send commands or data packets to the card */ static int if_cs_host_to_card(wlan_private *priv, u8 type, u8 *buf, u16 nb) { int ret = -1; lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb); switch (type) { case MVMS_DAT: priv->dnld_sent = DNLD_DATA_SENT; if_cs_send_data(priv, buf, nb); ret = 0; break; case MVMS_CMD: priv->dnld_sent = DNLD_CMD_SENT; ret = if_cs_send_cmd(priv, buf, nb); break; default: lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type); } lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); return ret; } static int if_cs_get_int_status(wlan_private *priv, u8 *ireg) { struct if_cs_card *card = (struct if_cs_card *)priv->card; //wlan_adapter *adapter = priv->adapter; int ret = 0; u16 int_cause; u8 *cmdbuf; *ireg = 0; lbs_deb_enter(LBS_DEB_CS); if (priv->adapter->surpriseremoved) goto out; int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE) & IF_CS_C_IC_MASK; if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause); *ireg = if_cs_read16(card, IF_CS_C_STATUS) & IF_CS_C_S_MASK; if (!*ireg) goto sbi_get_int_status_exit; sbi_get_int_status_exit: /* is there a data packet for us? */ if (*ireg & IF_CS_C_S_RX_UPLD_RDY) { struct sk_buff *skb = if_cs_receive_data(priv); libertas_process_rxed_packet(priv, skb); *ireg &= ~IF_CS_C_S_RX_UPLD_RDY; } if (*ireg & IF_CS_C_S_TX_DNLD_RDY) { priv->dnld_sent = DNLD_RES_RECEIVED; } /* Card has a command result for us */ if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) { spin_lock(&priv->adapter->driver_lock); if (!priv->adapter->cur_cmd) { cmdbuf = priv->upld_buf; priv->adapter->hisregcpy &= ~IF_CS_C_S_RX_UPLD_RDY; } else { cmdbuf = priv->adapter->cur_cmd->bufvirtualaddr; } ret = if_cs_receive_cmdres(priv, cmdbuf, &priv->upld_len); spin_unlock(&priv->adapter->driver_lock); if (ret < 0) lbs_pr_err("could not receive cmd from card\n"); } out: lbs_deb_leave_args(LBS_DEB_CS, "ret %d, ireg 0x%x, hisregcpy 0x%x", ret, *ireg, priv->adapter->hisregcpy); return ret; } static int if_cs_read_event_cause(wlan_private *priv) { lbs_deb_enter(LBS_DEB_CS); priv->adapter->eventcause = (if_cs_read16(priv->card, IF_CS_C_STATUS) & IF_CS_C_S_STATUS_MASK) >> 5; if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_HOST_EVENT); return 0; } /********************************************************************/ /* Card Services */ /********************************************************************/ /* * After a card is removed, if_cs_release() will unregister the * device, and release the PCMCIA configuration. If the device is * still open, this will be postponed until it is closed. */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; lbs_deb_enter(LBS_DEB_CS); pcmcia_disable_device(p_dev); free_irq(p_dev->irq.AssignedIRQ, card); if (card->iobase) ioport_unmap(card->iobase); lbs_deb_leave(LBS_DEB_CS); } /* * This creates an "instance" of the driver, allocating local data * structures for one device. The device is registered with Card * Services. * * The dev_link structure is initialized, but we don't actually * configure the card at this point -- we wait until we receive a card * insertion event. */ static int if_cs_probe(struct pcmcia_device *p_dev) { int ret = -ENOMEM; wlan_private *priv; struct if_cs_card *card; /* CIS parsing */ tuple_t tuple; cisparse_t parse; cistpl_cftable_entry_t *cfg = &parse.cftable_entry; cistpl_io_t *io = &cfg->io; u_char buf[64]; lbs_deb_enter(LBS_DEB_CS); card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL); if (!card) { lbs_pr_err("error in kzalloc\n"); goto out; } card->p_dev = p_dev; p_dev->priv = card; p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; p_dev->irq.Handler = NULL; p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID; p_dev->conf.Attributes = 0; p_dev->conf.IntType = INT_MEMORY_AND_IO; tuple.Attributes = 0; tuple.TupleData = buf; tuple.TupleDataMax = sizeof(buf); tuple.TupleOffset = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 || (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 || (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0) { lbs_pr_err("error in pcmcia_get_first_tuple etc\n"); goto out1; } p_dev->conf.ConfigIndex = cfg->index; /* Do we need to allocate an interrupt? */ if (cfg->irq.IRQInfo1) { p_dev->conf.Attributes |= CONF_ENABLE_IRQ; } /* IO window settings */ if (cfg->io.nwin != 1) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); ret = -ENODEV; goto out1; } p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; p_dev->io.BasePort1 = io->win[0].base; p_dev->io.NumPorts1 = io->win[0].len; /* This reserves IO space but doesn't actually enable it */ ret = pcmcia_request_io(p_dev, &p_dev->io); if (ret) { lbs_pr_err("error in pcmcia_request_io\n"); goto out1; } /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of * the irq structure is initialized. */ if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) { ret = pcmcia_request_irq(p_dev, &p_dev->irq); if (ret) { lbs_pr_err("error in pcmcia_request_irq\n"); goto out1; } } /* Initialize io access */ card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1); if (!card->iobase) { lbs_pr_err("error in ioport_map\n"); ret = -EIO; goto out1; } /* * This actually configures the PCMCIA socket -- setting up * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ ret = pcmcia_request_configuration(p_dev, &p_dev->conf); if (ret) { lbs_pr_err("error in pcmcia_request_configuration\n"); goto out2; } /* Finally, report what we've done */ lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n", p_dev->irq.AssignedIRQ, p_dev->io.BasePort1, p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1); /* Load the firmware early, before calling into libertas.ko */ ret = if_cs_prog_helper(card); if (ret == 0) ret = if_cs_prog_real(card); if (ret) goto out2; /* Make this card known to the libertas driver */ priv = libertas_add_card(card, &p_dev->dev); if (!priv) { ret = -ENOMEM; goto out2; } /* Store pointers to our call-back functions */ card->priv = priv; priv->card = card; priv->hw_host_to_card = if_cs_host_to_card; priv->hw_get_int_status = if_cs_get_int_status; priv->hw_read_event_cause = if_cs_read_event_cause; priv->adapter->fw_ready = 1; /* Now actually get the IRQ */ ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt, IRQF_SHARED, DRV_NAME, card); if (ret) { lbs_pr_err("error in request_irq\n"); goto out3; } /* Clear any interrupt cause that happend while sending * firmware/initializing card */ if_cs_write16(card, IF_CS_C_INT_CAUSE, IF_CS_C_IC_MASK); if_cs_enable_ints(card); /* And finally bring the card up */ if (libertas_start_card(priv) != 0) { lbs_pr_err("could not activate card\n"); goto out3; } ret = 0; goto out; out3: libertas_remove_card(priv); out2: ioport_unmap(card->iobase); out1: pcmcia_disable_device(p_dev); out: lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); return ret; } /* * This deletes a driver "instance". The device is de-registered with * Card Services. If it has been released, all local data structures * are freed. Otherwise, the structures will be freed when the device * is released. */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; lbs_deb_enter(LBS_DEB_CS); libertas_stop_card(card->priv); libertas_remove_card(card->priv); if_cs_disable_ints(card); if_cs_release(p_dev); kfree(card); lbs_deb_leave(LBS_DEB_CS); } /********************************************************************/ /* Module initialization */ /********************************************************************/ static struct pcmcia_device_id if_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); static struct pcmcia_driver libertas_driver = { .owner = THIS_MODULE, .drv = { .name = DRV_NAME, }, .probe = if_cs_probe, .remove = if_cs_detach, .id_table = if_cs_ids, }; static int __init if_cs_init(void) { int ret; lbs_deb_enter(LBS_DEB_CS); ret = pcmcia_register_driver(&libertas_driver); lbs_deb_leave(LBS_DEB_CS); return ret; } static void __exit if_cs_exit(void) { lbs_deb_enter(LBS_DEB_CS); pcmcia_unregister_driver(&libertas_driver); lbs_deb_leave(LBS_DEB_CS); } module_init(if_cs_init); module_exit(if_cs_exit);