/* * General Purpose functions for the global management of the * Communication Processor Module. * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) * * In addition to the individual control of the communication * channels, there are a few functions that globally affect the * communication processor. * * Buffer descriptors must be allocated from the dual ported memory * space. The allocator for that is here. When the communication * process is reset, we reclaim the memory available. There is * currently no deallocator for this memory. * The amount of space available is platform dependent. On the * MBX, the EPPC software loads additional microcode into the * communication processor, and uses some of the DP ram for this * purpose. Current, the first 512 bytes and the last 256 bytes of * memory are used. Right now I am conservative and only use the * memory that can never be used for microcode. If there are * applications that require more DP ram, we can expand the boundaries * but then we have to be careful of any downloaded microcode. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_8xx_GPIO #include #endif #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ immap_t __iomem *mpc8xx_immr; static cpic8xx_t __iomem *cpic_reg; static struct irq_host *cpm_pic_host; static void cpm_mask_irq(unsigned int irq) { unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq; clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); } static void cpm_unmask_irq(unsigned int irq) { unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq; setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); } static void cpm_end_irq(unsigned int irq) { unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq; out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec)); } static struct irq_chip cpm_pic = { .name = "CPM PIC", .mask = cpm_mask_irq, .unmask = cpm_unmask_irq, .eoi = cpm_end_irq, }; int cpm_get_irq(void) { int cpm_vec; /* Get the vector by setting the ACK bit and then reading * the register. */ out_be16(&cpic_reg->cpic_civr, 1); cpm_vec = in_be16(&cpic_reg->cpic_civr); cpm_vec >>= 11; return irq_linear_revmap(cpm_pic_host, cpm_vec); } static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw); irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq); return 0; } /* The CPM can generate the error interrupt when there is a race condition * between generating and masking interrupts. All we have to do is ACK it * and return. This is a no-op function so we don't need any special * tests in the interrupt handler. */ static irqreturn_t cpm_error_interrupt(int irq, void *dev) { return IRQ_HANDLED; } static struct irqaction cpm_error_irqaction = { .handler = cpm_error_interrupt, .name = "error", }; static struct irq_host_ops cpm_pic_host_ops = { .map = cpm_pic_host_map, }; unsigned int cpm_pic_init(void) { struct device_node *np = NULL; struct resource res; unsigned int sirq = NO_IRQ, hwirq, eirq; int ret; pr_debug("cpm_pic_init\n"); np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic"); if (np == NULL) np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); if (np == NULL) { printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); return sirq; } ret = of_address_to_resource(np, 0, &res); if (ret) goto end; cpic_reg = ioremap(res.start, res.end - res.start + 1); if (cpic_reg == NULL) goto end; sirq = irq_of_parse_and_map(np, 0); if (sirq == NO_IRQ) goto end; /* Initialize the CPM interrupt controller. */ hwirq = (unsigned int)irq_map[sirq].hwirq; out_be32(&cpic_reg->cpic_cicr, (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | ((hwirq/2) << 13) | CICR_HP_MASK); out_be32(&cpic_reg->cpic_cimr, 0); cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 64, &cpm_pic_host_ops, 64); if (cpm_pic_host == NULL) { printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); sirq = NO_IRQ; goto end; } /* Install our own error handler. */ np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); if (np == NULL) np = of_find_node_by_type(NULL, "cpm"); if (np == NULL) { printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); goto end; } eirq = irq_of_parse_and_map(np, 0); if (eirq == NO_IRQ) goto end; if (setup_irq(eirq, &cpm_error_irqaction)) printk(KERN_ERR "Could not allocate CPM error IRQ!"); setbits32(&cpic_reg->cpic_cicr, CICR_IEN); end: of_node_put(np); return sirq; } void __init cpm_reset(void) { sysconf8xx_t __iomem *siu_conf; mpc8xx_immr = ioremap(get_immrbase(), 0x4000); if (!mpc8xx_immr) { printk(KERN_CRIT "Could not map IMMR\n"); return; } cpmp = &mpc8xx_immr->im_cpm; #ifndef CONFIG_PPC_EARLY_DEBUG_CPM /* Perform a reset. */ out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); /* Wait for it. */ while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG); #endif #ifdef CONFIG_UCODE_PATCH cpm_load_patch(cpmp); #endif /* Set SDMA Bus Request priority 5. * On 860T, this also enables FEC priority 6. I am not sure * this is what we realy want for some applications, but the * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ siu_conf = immr_map(im_siu_conf); out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); cpm_muram_init(); } static DEFINE_SPINLOCK(cmd_lock); #define MAX_CR_CMD_LOOPS 10000 int cpm_command(u32 command, u8 opcode) { int i, ret; unsigned long flags; if (command & 0xffffff0f) return -EINVAL; spin_lock_irqsave(&cmd_lock, flags); ret = 0; out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8)); for (i = 0; i < MAX_CR_CMD_LOOPS; i++) if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) goto out; printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); ret = -EIO; out: spin_unlock_irqrestore(&cmd_lock, flags); return ret; } EXPORT_SYMBOL(cpm_command); /* Set a baud rate generator. This needs lots of work. There are * four BRGs, any of which can be wired to any channel. * The internal baud rate clock is the system clock divided by 16. * This assumes the baudrate is 16x oversampled by the uart. */ #define BRG_INT_CLK (get_brgfreq()) #define BRG_UART_CLK (BRG_INT_CLK/16) #define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16) void cpm_setbrg(uint brg, uint rate) { u32 __iomem *bp; /* This is good enough to get SMCs running..... */ bp = &cpmp->cp_brgc1; bp += brg; /* The BRG has a 12-bit counter. For really slow baud rates (or * really fast processors), we may have to further divide by 16. */ if (((BRG_UART_CLK / rate) - 1) < 4096) out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); else out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16); } struct cpm_ioport16 { __be16 dir, par, odr_sor, dat, intr; __be16 res[3]; }; struct cpm_ioport32b { __be32 dir, par, odr, dat; }; struct cpm_ioport32e { __be32 dir, par, sor, odr, dat; }; static void cpm1_set_pin32(int port, int pin, int flags) { struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); if (port == CPM_PORTB) iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pbdir; else iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pedir; if (flags & CPM_PIN_OUTPUT) setbits32(&iop->dir, pin); else clrbits32(&iop->dir, pin); if (!(flags & CPM_PIN_GPIO)) setbits32(&iop->par, pin); else clrbits32(&iop->par, pin); if (port == CPM_PORTB) { if (flags & CPM_PIN_OPENDRAIN) setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin); else clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin); } if (port == CPM_PORTE) { if (flags & CPM_PIN_SECONDARY) setbits32(&iop->sor, pin); else clrbits32(&iop->sor, pin); if (flags & CPM_PIN_OPENDRAIN) setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); else clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); } } static void cpm1_set_pin16(int port, int pin, int flags) { struct cpm_ioport16 __iomem *iop = (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport; pin = 1 << (15 - pin); if (port != 0) iop += port - 1; if (flags & CPM_PIN_OUTPUT) setbits16(&iop->dir, pin); else clrbits16(&iop->dir, pin); if (!(flags & CPM_PIN_GPIO)) setbits16(&iop->par, pin); else clrbits16(&iop->par, pin); if (port == CPM_PORTA) { if (flags & CPM_PIN_OPENDRAIN) setbits16(&iop->odr_sor, pin); else clrbits16(&iop->odr_sor, pin); } if (port == CPM_PORTC) { if (flags & CPM_PIN_SECONDARY) setbits16(&iop->odr_sor, pin); else clrbits16(&iop->odr_sor, pin); } } void cpm1_set_pin(enum cpm_port port, int pin, int flags) { if (port == CPM_PORTB || port == CPM_PORTE) cpm1_set_pin32(port, pin, flags); else cpm1_set_pin16(port, pin, flags); } int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) { int shift; int i, bits = 0; u32 __iomem *reg; u32 mask = 7; u8 clk_map[][3] = { {CPM_CLK_SCC1, CPM_BRG1, 0}, {CPM_CLK_SCC1, CPM_BRG2, 1}, {CPM_CLK_SCC1, CPM_BRG3, 2}, {CPM_CLK_SCC1, CPM_BRG4, 3}, {CPM_CLK_SCC1, CPM_CLK1, 4}, {CPM_CLK_SCC1, CPM_CLK2, 5}, {CPM_CLK_SCC1, CPM_CLK3, 6}, {CPM_CLK_SCC1, CPM_CLK4, 7}, {CPM_CLK_SCC2, CPM_BRG1, 0}, {CPM_CLK_SCC2, CPM_BRG2, 1}, {CPM_CLK_SCC2, CPM_BRG3, 2}, {CPM_CLK_SCC2, CPM_BRG4, 3}, {CPM_CLK_SCC2, CPM_CLK1, 4}, {CPM_CLK_SCC2, CPM_CLK2, 5}, {CPM_CLK_SCC2, CPM_CLK3, 6}, {CPM_CLK_SCC2, CPM_CLK4, 7}, {CPM_CLK_SCC3, CPM_BRG1, 0}, {CPM_CLK_SCC3, CPM_BRG2, 1}, {CPM_CLK_SCC3, CPM_BRG3, 2}, {CPM_CLK_SCC3, CPM_BRG4, 3}, {CPM_CLK_SCC3, CPM_CLK5, 4}, {CPM_CLK_SCC3, CPM_CLK6, 5}, {CPM_CLK_SCC3, CPM_CLK7, 6}, {CPM_CLK_SCC3, CPM_CLK8, 7}, {CPM_CLK_SCC4, CPM_BRG1, 0}, {CPM_CLK_SCC4, CPM_BRG2, 1}, {CPM_CLK_SCC4, CPM_BRG3, 2}, {CPM_CLK_SCC4, CPM_BRG4, 3}, {CPM_CLK_SCC4, CPM_CLK5, 4}, {CPM_CLK_SCC4, CPM_CLK6, 5}, {CPM_CLK_SCC4, CPM_CLK7, 6}, {CPM_CLK_SCC4, CPM_CLK8, 7}, {CPM_CLK_SMC1, CPM_BRG1, 0}, {CPM_CLK_SMC1, CPM_BRG2, 1}, {CPM_CLK_SMC1, CPM_BRG3, 2}, {CPM_CLK_SMC1, CPM_BRG4, 3}, {CPM_CLK_SMC1, CPM_CLK1, 4}, {CPM_CLK_SMC1, CPM_CLK2, 5}, {CPM_CLK_SMC1, CPM_CLK3, 6}, {CPM_CLK_SMC1, CPM_CLK4, 7}, {CPM_CLK_SMC2, CPM_BRG1, 0}, {CPM_CLK_SMC2, CPM_BRG2, 1}, {CPM_CLK_SMC2, CPM_BRG3, 2}, {CPM_CLK_SMC2, CPM_BRG4, 3}, {CPM_CLK_SMC2, CPM_CLK5, 4}, {CPM_CLK_SMC2, CPM_CLK6, 5}, {CPM_CLK_SMC2, CPM_CLK7, 6}, {CPM_CLK_SMC2, CPM_CLK8, 7}, }; switch (target) { case CPM_CLK_SCC1: reg = &mpc8xx_immr->im_cpm.cp_sicr; shift = 0; break; case CPM_CLK_SCC2: reg = &mpc8xx_immr->im_cpm.cp_sicr; shift = 8; break; case CPM_CLK_SCC3: reg = &mpc8xx_immr->im_cpm.cp_sicr; shift = 16; break; case CPM_CLK_SCC4: reg = &mpc8xx_immr->im_cpm.cp_sicr; shift = 24; break; case CPM_CLK_SMC1: reg = &mpc8xx_immr->im_cpm.cp_simode; shift = 12; break; case CPM_CLK_SMC2: reg = &mpc8xx_immr->im_cpm.cp_simode; shift = 28; break; default: printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n"); return -EINVAL; } for (i = 0; i < ARRAY_SIZE(clk_map); i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) { bits = clk_map[i][2]; break; } } if (i == ARRAY_SIZE(clk_map)) { printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n"); return -EINVAL; } bits <<= shift; mask <<= shift; if (reg == &mpc8xx_immr->im_cpm.cp_sicr) { if (mode == CPM_CLK_RTX) { bits |= bits << 3; mask |= mask << 3; } else if (mode == CPM_CLK_RX) { bits <<= 3; mask <<= 3; } } out_be32(reg, (in_be32(reg) & ~mask) | bits); return 0; } /* * GPIO LIB API implementation */ #ifdef CONFIG_8xx_GPIO struct cpm1_gpio16_chip { struct of_mm_gpio_chip mm_gc; spinlock_t lock; /* shadowed data register to clear/set bits safely */ u16 cpdata; }; static inline struct cpm1_gpio16_chip * to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) { return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); } static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) { struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); struct cpm_ioport16 __iomem *iop = mm_gc->regs; cpm1_gc->cpdata = in_be16(&iop->dat); } static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm_ioport16 __iomem *iop = mm_gc->regs; u16 pin_mask; pin_mask = 1 << (15 - gpio); return !!(in_be16(&iop->dat) & pin_mask); } static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask, int value) { struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); struct cpm_ioport16 __iomem *iop = mm_gc->regs; if (value) cpm1_gc->cpdata |= pin_mask; else cpm1_gc->cpdata &= ~pin_mask; out_be16(&iop->dat, cpm1_gc->cpdata); } static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); unsigned long flags; u16 pin_mask = 1 << (15 - gpio); spin_lock_irqsave(&cpm1_gc->lock, flags); __cpm1_gpio16_set(mm_gc, pin_mask, value); spin_unlock_irqrestore(&cpm1_gc->lock, flags); } static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); struct cpm_ioport16 __iomem *iop = mm_gc->regs; unsigned long flags; u16 pin_mask = 1 << (15 - gpio); spin_lock_irqsave(&cpm1_gc->lock, flags); setbits16(&iop->dir, pin_mask); __cpm1_gpio16_set(mm_gc, pin_mask, val); spin_unlock_irqrestore(&cpm1_gc->lock, flags); return 0; } static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); struct cpm_ioport16 __iomem *iop = mm_gc->regs; unsigned long flags; u16 pin_mask = 1 << (15 - gpio); spin_lock_irqsave(&cpm1_gc->lock, flags); clrbits16(&iop->dir, pin_mask); spin_unlock_irqrestore(&cpm1_gc->lock, flags); return 0; } int cpm1_gpiochip_add16(struct device_node *np) { struct cpm1_gpio16_chip *cpm1_gc; struct of_mm_gpio_chip *mm_gc; struct gpio_chip *gc; cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); if (!cpm1_gc) return -ENOMEM; spin_lock_init(&cpm1_gc->lock); mm_gc = &cpm1_gc->mm_gc; gc = &mm_gc->gc; mm_gc->save_regs = cpm1_gpio16_save_regs; gc->of_gpio_n_cells = 2; gc->ngpio = 16; gc->direction_input = cpm1_gpio16_dir_in; gc->direction_output = cpm1_gpio16_dir_out; gc->get = cpm1_gpio16_get; gc->set = cpm1_gpio16_set; return of_mm_gpiochip_add(np, mm_gc); } struct cpm1_gpio32_chip { struct of_mm_gpio_chip mm_gc; spinlock_t lock; /* shadowed data register to clear/set bits safely */ u32 cpdata; }; static inline struct cpm1_gpio32_chip * to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) { return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); } static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) { struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); struct cpm_ioport32b __iomem *iop = mm_gc->regs; cpm1_gc->cpdata = in_be32(&iop->dat); } static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm_ioport32b __iomem *iop = mm_gc->regs; u32 pin_mask; pin_mask = 1 << (31 - gpio); return !!(in_be32(&iop->dat) & pin_mask); } static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask, int value) { struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); struct cpm_ioport32b __iomem *iop = mm_gc->regs; if (value) cpm1_gc->cpdata |= pin_mask; else cpm1_gc->cpdata &= ~pin_mask; out_be32(&iop->dat, cpm1_gc->cpdata); } static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); unsigned long flags; u32 pin_mask = 1 << (31 - gpio); spin_lock_irqsave(&cpm1_gc->lock, flags); __cpm1_gpio32_set(mm_gc, pin_mask, value); spin_unlock_irqrestore(&cpm1_gc->lock, flags); } static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); struct cpm_ioport32b __iomem *iop = mm_gc->regs; unsigned long flags; u32 pin_mask = 1 << (31 - gpio); spin_lock_irqsave(&cpm1_gc->lock, flags); setbits32(&iop->dir, pin_mask); __cpm1_gpio32_set(mm_gc, pin_mask, val); spin_unlock_irqrestore(&cpm1_gc->lock, flags); return 0; } static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); struct cpm_ioport32b __iomem *iop = mm_gc->regs; unsigned long flags; u32 pin_mask = 1 << (31 - gpio); spin_lock_irqsave(&cpm1_gc->lock, flags); clrbits32(&iop->dir, pin_mask); spin_unlock_irqrestore(&cpm1_gc->lock, flags); return 0; } int cpm1_gpiochip_add32(struct device_node *np) { struct cpm1_gpio32_chip *cpm1_gc; struct of_mm_gpio_chip *mm_gc; struct gpio_chip *gc; cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); if (!cpm1_gc) return -ENOMEM; spin_lock_init(&cpm1_gc->lock); mm_gc = &cpm1_gc->mm_gc; gc = &mm_gc->gc; mm_gc->save_regs = cpm1_gpio32_save_regs; gc->of_gpio_n_cells = 2; gc->ngpio = 32; gc->direction_input = cpm1_gpio32_dir_in; gc->direction_output = cpm1_gpio32_dir_out; gc->get = cpm1_gpio32_get; gc->set = cpm1_gpio32_set; return of_mm_gpiochip_add(np, mm_gc); } static int cpm_init_par_io(void) { struct device_node *np; for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") cpm1_gpiochip_add16(np); for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") cpm1_gpiochip_add32(np); for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") cpm1_gpiochip_add16(np); for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") cpm1_gpiochip_add16(np); /* Port E uses CPM2 layout */ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") cpm2_gpiochip_add32(np); return 0; } arch_initcall(cpm_init_par_io); #endif /* CONFIG_8xx_GPIO */