/* * The file intends to implement the platform dependent EEH operations on * powernv platform. Actually, the powernv was created in order to fully * hypervisor support. * * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "powernv.h" #include "pci.h" /** * powernv_eeh_init - EEH platform dependent initialization * * EEH platform dependent initialization on powernv */ static int powernv_eeh_init(void) { struct pci_controller *hose; struct pnv_phb *phb; /* We require OPALv3 */ if (!firmware_has_feature(FW_FEATURE_OPALv3)) { pr_warn("%s: OPALv3 is required !\n", __func__); return -EINVAL; } /* Set probe mode */ eeh_add_flag(EEH_PROBE_MODE_DEV); /* * P7IOC blocks PCI config access to frozen PE, but PHB3 * doesn't do that. So we have to selectively enable I/O * prior to collecting error log. */ list_for_each_entry(hose, &hose_list, list_node) { phb = hose->private_data; if (phb->model == PNV_PHB_MODEL_P7IOC) eeh_add_flag(EEH_ENABLE_IO_FOR_LOG); break; } return 0; } /** * powernv_eeh_post_init - EEH platform dependent post initialization * * EEH platform dependent post initialization on powernv. When * the function is called, the EEH PEs and devices should have * been built. If the I/O cache staff has been built, EEH is * ready to supply service. */ static int powernv_eeh_post_init(void) { struct pci_controller *hose; struct pnv_phb *phb; int ret = 0; list_for_each_entry(hose, &hose_list, list_node) { phb = hose->private_data; if (phb->eeh_ops && phb->eeh_ops->post_init) { ret = phb->eeh_ops->post_init(hose); if (ret) break; } } return ret; } /** * powernv_eeh_dev_probe - Do probe on PCI device * @dev: PCI device * @flag: unused * * When EEH module is installed during system boot, all PCI devices * are checked one by one to see if it supports EEH. The function * is introduced for the purpose. By default, EEH has been enabled * on all PCI devices. That's to say, we only need do necessary * initialization on the corresponding eeh device and create PE * accordingly. * * It's notable that's unsafe to retrieve the EEH device through * the corresponding PCI device. During the PCI device hotplug, which * was possiblly triggered by EEH core, the binding between EEH device * and the PCI device isn't built yet. */ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct pnv_phb *phb = hose->private_data; struct device_node *dn = pci_device_to_OF_node(dev); struct eeh_dev *edev = of_node_to_eeh_dev(dn); int ret; /* * When probing the root bridge, which doesn't have any * subordinate PCI devices. We don't have OF node for * the root bridge. So it's not reasonable to continue * the probing. */ if (!dn || !edev || edev->pe) return 0; /* Skip for PCI-ISA bridge */ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA) return 0; /* Initialize eeh device */ edev->class_code = dev->class; edev->mode &= 0xFFFFFF00; if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) edev->mode |= EEH_DEV_BRIDGE; edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (pci_is_pcie(dev)) { edev->pcie_cap = pci_pcie_cap(dev); if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) edev->mode |= EEH_DEV_ROOT_PORT; else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) edev->mode |= EEH_DEV_DS_PORT; edev->aer_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); } edev->config_addr = ((dev->bus->number << 8) | dev->devfn); edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff); /* Create PE */ ret = eeh_add_to_parent_pe(edev); if (ret) { pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n", __func__, pci_name(dev), ret); return ret; } /* * Cache the PE primary bus, which can't be fetched when * full hotplug is in progress. In that case, all child * PCI devices of the PE are expected to be removed prior * to PE reset. */ if (!edev->pe->bus) edev->pe->bus = dev->bus; /* * Enable EEH explicitly so that we will do EEH check * while accessing I/O stuff */ eeh_add_flag(EEH_ENABLED); /* Save memory bars */ eeh_save_bars(edev); return 0; } /** * powernv_eeh_set_option - Initialize EEH or MMIO/DMA reenable * @pe: EEH PE * @option: operation to be issued * * The function is used to control the EEH functionality globally. * Currently, following options are support according to PAPR: * Enable EEH, Disable EEH, Enable MMIO and Enable DMA */ static int powernv_eeh_set_option(struct eeh_pe *pe, int option) { struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; int ret = -EEXIST; /* * What we need do is pass it down for hardware * implementation to handle it. */ if (phb->eeh_ops && phb->eeh_ops->set_option) ret = phb->eeh_ops->set_option(pe, option); return ret; } /** * powernv_eeh_get_pe_addr - Retrieve PE address * @pe: EEH PE * * Retrieve the PE address according to the given tranditional * PCI BDF (Bus/Device/Function) address. */ static int powernv_eeh_get_pe_addr(struct eeh_pe *pe) { return pe->addr; } /** * powernv_eeh_get_state - Retrieve PE state * @pe: EEH PE * @delay: delay while PE state is temporarily unavailable * * Retrieve the state of the specified PE. For IODA-compitable * platform, it should be retrieved from IODA table. Therefore, * we prefer passing down to hardware implementation to handle * it. */ static int powernv_eeh_get_state(struct eeh_pe *pe, int *delay) { struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; int ret = EEH_STATE_NOT_SUPPORT; if (phb->eeh_ops && phb->eeh_ops->get_state) { ret = phb->eeh_ops->get_state(pe); /* * If the PE state is temporarily unavailable, * to inform the EEH core delay for default * period (1 second) */ if (delay) { *delay = 0; if (ret & EEH_STATE_UNAVAILABLE) *delay = 1000; } } return ret; } /** * powernv_eeh_reset - Reset the specified PE * @pe: EEH PE * @option: reset option * * Reset the specified PE */ static int powernv_eeh_reset(struct eeh_pe *pe, int option) { struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; int ret = -EEXIST; if (phb->eeh_ops && phb->eeh_ops->reset) ret = phb->eeh_ops->reset(pe, option); return ret; } /** * powernv_eeh_wait_state - Wait for PE state * @pe: EEH PE * @max_wait: maximal period in microsecond * * Wait for the state of associated PE. It might take some time * to retrieve the PE's state. */ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait) { int ret; int mwait; while (1) { ret = powernv_eeh_get_state(pe, &mwait); /* * If the PE's state is temporarily unavailable, * we have to wait for the specified time. Otherwise, * the PE's state will be returned immediately. */ if (ret != EEH_STATE_UNAVAILABLE) return ret; max_wait -= mwait; if (max_wait <= 0) { pr_warn("%s: Timeout getting PE#%x's state (%d)\n", __func__, pe->addr, max_wait); return EEH_STATE_NOT_SUPPORT; } msleep(mwait); } return EEH_STATE_NOT_SUPPORT; } /** * powernv_eeh_get_log - Retrieve error log * @pe: EEH PE * @severity: temporary or permanent error log * @drv_log: driver log to be combined with retrieved error log * @len: length of driver log * * Retrieve the temporary or permanent error from the PE. */ static int powernv_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len) { struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; int ret = -EEXIST; if (phb->eeh_ops && phb->eeh_ops->get_log) ret = phb->eeh_ops->get_log(pe, severity, drv_log, len); return ret; } /** * powernv_eeh_configure_bridge - Configure PCI bridges in the indicated PE * @pe: EEH PE * * The function will be called to reconfigure the bridges included * in the specified PE so that the mulfunctional PE would be recovered * again. */ static int powernv_eeh_configure_bridge(struct eeh_pe *pe) { struct pci_controller *hose = pe->phb; struct pnv_phb *phb = hose->private_data; int ret = 0; if (phb->eeh_ops && phb->eeh_ops->configure_bridge) ret = phb->eeh_ops->configure_bridge(pe); return ret; } /** * powernv_eeh_next_error - Retrieve next EEH error to handle * @pe: Affected PE * * Using OPAL API, to retrieve next EEH error for EEH core to handle */ static int powernv_eeh_next_error(struct eeh_pe **pe) { struct pci_controller *hose; struct pnv_phb *phb = NULL; list_for_each_entry(hose, &hose_list, list_node) { phb = hose->private_data; break; } if (phb && phb->eeh_ops->next_error) return phb->eeh_ops->next_error(pe); return -EEXIST; } static int powernv_eeh_restore_config(struct device_node *dn) { struct eeh_dev *edev = of_node_to_eeh_dev(dn); struct pnv_phb *phb; s64 ret; if (!edev) return -EEXIST; phb = edev->phb->private_data; ret = opal_pci_reinit(phb->opal_id, OPAL_REINIT_PCI_DEV, edev->config_addr); if (ret) { pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", __func__, edev->config_addr, ret); return -EIO; } return 0; } static struct eeh_ops powernv_eeh_ops = { .name = "powernv", .init = powernv_eeh_init, .post_init = powernv_eeh_post_init, .of_probe = NULL, .dev_probe = powernv_eeh_dev_probe, .set_option = powernv_eeh_set_option, .get_pe_addr = powernv_eeh_get_pe_addr, .get_state = powernv_eeh_get_state, .reset = powernv_eeh_reset, .wait_state = powernv_eeh_wait_state, .get_log = powernv_eeh_get_log, .configure_bridge = powernv_eeh_configure_bridge, .read_config = pnv_pci_cfg_read, .write_config = pnv_pci_cfg_write, .next_error = powernv_eeh_next_error, .restore_config = powernv_eeh_restore_config }; /** * eeh_powernv_init - Register platform dependent EEH operations * * EEH initialization on powernv platform. This function should be * called before any EEH related functions. */ static int __init eeh_powernv_init(void) { int ret = -EINVAL; eeh_set_pe_aux_size(PNV_PCI_DIAG_BUF_SIZE); ret = eeh_ops_register(&powernv_eeh_ops); if (!ret) pr_info("EEH: PowerNV platform initialized\n"); else pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret); return ret; } machine_early_initcall(powernv, eeh_powernv_init);