/* * External Interrupt Controller on Spider South Bridge * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * * Author: Arnd Bergmann * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include "interrupt.h" /* register layout taken from Spider spec, table 7.4-4 */ enum { TIR_DEN = 0x004, /* Detection Enable Register */ TIR_MSK = 0x084, /* Mask Level Register */ TIR_EDC = 0x0c0, /* Edge Detection Clear Register */ TIR_PNDA = 0x100, /* Pending Register A */ TIR_PNDB = 0x104, /* Pending Register B */ TIR_CS = 0x144, /* Current Status Register */ TIR_LCSA = 0x150, /* Level Current Status Register A */ TIR_LCSB = 0x154, /* Level Current Status Register B */ TIR_LCSC = 0x158, /* Level Current Status Register C */ TIR_LCSD = 0x15c, /* Level Current Status Register D */ TIR_CFGA = 0x200, /* Setting Register A0 */ TIR_CFGB = 0x204, /* Setting Register B0 */ /* 0x208 ... 0x3ff Setting Register An/Bn */ TIR_PPNDA = 0x400, /* Packet Pending Register A */ TIR_PPNDB = 0x404, /* Packet Pending Register B */ TIR_PIERA = 0x408, /* Packet Output Error Register A */ TIR_PIERB = 0x40c, /* Packet Output Error Register B */ TIR_PIEN = 0x444, /* Packet Output Enable Register */ TIR_PIPND = 0x454, /* Packet Output Pending Register */ TIRDID = 0x484, /* Spider Device ID Register */ REISTIM = 0x500, /* Reissue Command Timeout Time Setting */ REISTIMEN = 0x504, /* Reissue Command Timeout Setting */ REISWAITEN = 0x508, /* Reissue Wait Control*/ }; #define SPIDER_CHIP_COUNT 4 #define SPIDER_SRC_COUNT 64 #define SPIDER_IRQ_INVALID 63 struct spider_pic { struct irq_domain *host; void __iomem *regs; unsigned int node_id; }; static struct spider_pic spider_pics[SPIDER_CHIP_COUNT]; static struct spider_pic *spider_irq_data_to_pic(struct irq_data *d) { return irq_data_get_irq_chip_data(d); } static void __iomem *spider_get_irq_config(struct spider_pic *pic, unsigned int src) { return pic->regs + TIR_CFGA + 8 * src; } static void spider_unmask_irq(struct irq_data *d) { struct spider_pic *pic = spider_irq_data_to_pic(d); void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d)); out_be32(cfg, in_be32(cfg) | 0x30000000u); } static void spider_mask_irq(struct irq_data *d) { struct spider_pic *pic = spider_irq_data_to_pic(d); void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d)); out_be32(cfg, in_be32(cfg) & ~0x30000000u); } static void spider_ack_irq(struct irq_data *d) { struct spider_pic *pic = spider_irq_data_to_pic(d); unsigned int src = irqd_to_hwirq(d); /* Reset edge detection logic if necessary */ if (irqd_is_level_type(d)) return; /* Only interrupts 47 to 50 can be set to edge */ if (src < 47 || src > 50) return; /* Perform the clear of the edge logic */ out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf)); } static int spider_set_irq_type(struct irq_data *d, unsigned int type) { unsigned int sense = type & IRQ_TYPE_SENSE_MASK; struct spider_pic *pic = spider_irq_data_to_pic(d); unsigned int hw = irqd_to_hwirq(d); void __iomem *cfg = spider_get_irq_config(pic, hw); u32 old_mask; u32 ic; /* Note that only level high is supported for most interrupts */ if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH && (hw < 47 || hw > 50)) return -EINVAL; /* Decode sense type */ switch(sense) { case IRQ_TYPE_EDGE_RISING: ic = 0x3; break; case IRQ_TYPE_EDGE_FALLING: ic = 0x2; break; case IRQ_TYPE_LEVEL_LOW: ic = 0x0; break; case IRQ_TYPE_LEVEL_HIGH: case IRQ_TYPE_NONE: ic = 0x1; break; default: return -EINVAL; } /* Configure the source. One gross hack that was there before and * that I've kept around is the priority to the BE which I set to * be the same as the interrupt source number. I don't know whether * that's supposed to make any kind of sense however, we'll have to * decide that, but for now, I'm not changing the behaviour. */ old_mask = in_be32(cfg) & 0x30000000u; out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe); out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff)); return 0; } static struct irq_chip spider_pic = { .name = "SPIDER", .irq_unmask = spider_unmask_irq, .irq_mask = spider_mask_irq, .irq_ack = spider_ack_irq, .irq_set_type = spider_set_irq_type, }; static int spider_host_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { irq_set_chip_data(virq, h->host_data); irq_set_chip_and_handler(virq, &spider_pic, handle_level_irq); /* Set default irq type */ irq_set_irq_type(virq, IRQ_TYPE_NONE); return 0; } static int spider_host_xlate(struct irq_domain *h, struct device_node *ct, const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { /* Spider interrupts have 2 cells, first is the interrupt source, * second, well, I don't know for sure yet ... We mask the top bits * because old device-trees encode a node number in there */ *out_hwirq = intspec[0] & 0x3f; *out_flags = IRQ_TYPE_LEVEL_HIGH; return 0; } static const struct irq_domain_ops spider_host_ops = { .map = spider_host_map, .xlate = spider_host_xlate, }; static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); struct spider_pic *pic = irq_desc_get_handler_data(desc); unsigned int cs, virq; cs = in_be32(pic->regs + TIR_CS) >> 24; if (cs == SPIDER_IRQ_INVALID) virq = NO_IRQ; else virq = irq_linear_revmap(pic->host, cs); if (virq != NO_IRQ) generic_handle_irq(virq); chip->irq_eoi(&desc->irq_data); } /* For hooking up the cascace we have a problem. Our device-tree is * crap and we don't know on which BE iic interrupt we are hooked on at * least not the "standard" way. We can reconstitute it based on two * informations though: which BE node we are connected to and whether * we are connected to IOIF0 or IOIF1. Right now, we really only care * about the IBM cell blade and we know that its firmware gives us an * interrupt-map property which is pretty strange. */ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) { unsigned int virq; const u32 *imap, *tmp; int imaplen, intsize, unit; struct device_node *iic; /* First, we check whether we have a real "interrupts" in the device * tree in case the device-tree is ever fixed */ struct of_irq oirq; if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) { virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); return virq; } /* Now do the horrible hacks */ tmp = of_get_property(pic->host->of_node, "#interrupt-cells", NULL); if (tmp == NULL) return NO_IRQ; intsize = *tmp; imap = of_get_property(pic->host->of_node, "interrupt-map", &imaplen); if (imap == NULL || imaplen < (intsize + 1)) return NO_IRQ; iic = of_find_node_by_phandle(imap[intsize]); if (iic == NULL) return NO_IRQ; imap += intsize + 1; tmp = of_get_property(iic, "#interrupt-cells", NULL); if (tmp == NULL) { of_node_put(iic); return NO_IRQ; } intsize = *tmp; /* Assume unit is last entry of interrupt specifier */ unit = imap[intsize - 1]; /* Ok, we have a unit, now let's try to get the node */ tmp = of_get_property(iic, "ibm,interrupt-server-ranges", NULL); if (tmp == NULL) { of_node_put(iic); return NO_IRQ; } /* ugly as hell but works for now */ pic->node_id = (*tmp) >> 1; of_node_put(iic); /* Ok, now let's get cracking. You may ask me why I just didn't match * the iic host from the iic OF node, but that way I'm still compatible * with really really old old firmwares for which we don't have a node */ /* Manufacture an IIC interrupt number of class 2 */ virq = irq_create_mapping(NULL, (pic->node_id << IIC_IRQ_NODE_SHIFT) | (2 << IIC_IRQ_CLASS_SHIFT) | unit); if (virq == NO_IRQ) printk(KERN_ERR "spider_pic: failed to map cascade !"); return virq; } static void __init spider_init_one(struct device_node *of_node, int chip, unsigned long addr) { struct spider_pic *pic = &spider_pics[chip]; int i, virq; /* Map registers */ pic->regs = ioremap(addr, 0x1000); if (pic->regs == NULL) panic("spider_pic: can't map registers !"); /* Allocate a host */ pic->host = irq_domain_add_linear(of_node, SPIDER_SRC_COUNT, &spider_host_ops, pic); if (pic->host == NULL) panic("spider_pic: can't allocate irq host !"); /* Go through all sources and disable them */ for (i = 0; i < SPIDER_SRC_COUNT; i++) { void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i; out_be32(cfg, in_be32(cfg) & ~0x30000000u); } /* do not mask any interrupts because of level */ out_be32(pic->regs + TIR_MSK, 0x0); /* enable interrupt packets to be output */ out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1); /* Hook up the cascade interrupt to the iic and nodeid */ virq = spider_find_cascade_and_node(pic); if (virq == NO_IRQ) return; irq_set_handler_data(virq, pic); irq_set_chained_handler(virq, spider_irq_cascade); printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n", pic->node_id, addr, of_node->full_name); /* Enable the interrupt detection enable bit. Do this last! */ out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1); } void __init spider_init_IRQ(void) { struct resource r; struct device_node *dn; int chip = 0; /* XXX node numbers are totally bogus. We _hope_ we get the device * nodes in the right order here but that's definitely not guaranteed, * we need to get the node from the device tree instead. * There is currently no proper property for it (but our whole * device-tree is bogus anyway) so all we can do is pray or maybe test * the address and deduce the node-id */ for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { if (of_device_is_compatible(dn, "CBEA,platform-spider-pic")) { if (of_address_to_resource(dn, 0, &r)) { printk(KERN_WARNING "spider-pic: Failed\n"); continue; } } else if (of_device_is_compatible(dn, "sti,platform-spider-pic") && (chip < 2)) { static long hard_coded_pics[] = { 0x24000008000ul, 0x34000008000ul}; r.start = hard_coded_pics[chip]; } else continue; spider_init_one(dn, chip++, r.start); } }