/* * Copyright 2007 David Gibson, IBM Corporation. * * Based on earlier code: * Matt Porter * Copyright 2002-2005 MontaVista Software Inc. * * Eugene Surovegin or * Copyright (c) 2003, 2004 Zultys Technologies * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include "types.h" #include "string.h" #include "stdio.h" #include "ops.h" #include "reg.h" #include "dcr.h" /* Read the 4xx SDRAM controller to get size of system memory. */ void ibm4xx_fixup_memsize(void) { int i; unsigned long memsize, bank_config; memsize = 0; for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); if (bank_config & SDRAM_CONFIG_BANK_ENABLE) memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); } dt_fixup_memory(0, memsize); } #define SPRN_DBCR0_40X 0x3F2 #define SPRN_DBCR0_44X 0x134 #define DBCR0_RST_SYSTEM 0x30000000 void ibm44x_dbcr_reset(void) { unsigned long tmp; asm volatile ( "mfspr %0,%1\n" "oris %0,%0,%2@h\n" "mtspr %1,%0" : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM) ); } void ibm40x_dbcr_reset(void) { unsigned long tmp; asm volatile ( "mfspr %0,%1\n" "oris %0,%0,%2@h\n" "mtspr %1,%0" : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) ); } #define EMAC_RESET 0x20000000 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) { /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */ if (emac0) *emac0 = EMAC_RESET; if (emac1) *emac1 = EMAC_RESET; mtdcr(DCRN_MAL0_CFG, MAL_RESET); } /* Read 4xx EBC bus bridge registers to get mappings of the peripheral * banks into the OPB address space */ void ibm4xx_fixup_ebc_ranges(const char *ebc) { void *devp; u32 bxcr; u32 ranges[EBC_NUM_BANKS*4]; u32 *p = ranges; int i; for (i = 0; i < EBC_NUM_BANKS; i++) { mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); bxcr = mfdcr(DCRN_EBC0_CFGDATA); if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { *p++ = i; *p++ = 0; *p++ = bxcr & EBC_BXCR_BAS; *p++ = EBC_BXCR_BANK_SIZE(bxcr); } } devp = finddevice(ebc); if (! devp) fatal("Couldn't locate EBC node %s\n\r", ebc); setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); }