/* * DTS file for SPEAr320 SoC * * Copyright 2012 Viresh Kumar * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear3xx.dtsi" / { ahb { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; #gpio-range-cells = <2>; }; clcd@90000000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x90000000 0x1000>; interrupts = <33>; status = "disabled"; }; fsmc: flash@4c000000 { compatible = "st,spear600-fsmc-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x4c000000 0x1000 /* FSMC Register */ 0x50000000 0x0010>; /* NAND Base */ reg-names = "fsmc_regs", "nand_data"; st,ale-off = <0x20000>; st,cle-off = <0x10000>; status = "disabled"; }; sdhci@70000000 { compatible = "st,sdhci-spear"; reg = <0x70000000 0x100>; interrupts = <29>; status = "disabled"; }; spi1: spi@a5000000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xa5000000 0x1000>; status = "disabled"; }; spi2: spi@a6000000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xa6000000 0x1000>; status = "disabled"; }; apb { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges = <0xa0000000 0xa0000000 0x20000000 0xd0000000 0xd0000000 0x30000000>; i2c1: i2c@a7000000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xa7000000 0x1000>; status = "disabled"; }; serial@a3000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xa3000000 0x1000>; status = "disabled"; }; serial@a4000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xa4000000 0x1000>; status = "disabled"; }; gpiopinctrl: gpio@b3000000 { compatible = "st,spear-plgpio"; reg = <0xb3000000 0x1000>; #interrupt-cells = <1>; interrupt-controller; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinmux 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; st-plgpio,enb-reg = <0x24>; st-plgpio,wdata-reg = <0x34>; st-plgpio,dir-reg = <0x44>; st-plgpio,ie-reg = <0x64>; st-plgpio,rdata-reg = <0x54>; st-plgpio,mis-reg = <0x84>; st-plgpio,eit-reg = <0x94>; }; }; }; };