From 8961df8950b1235cb7594e143a31bcc63757b660 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 3 Mar 2017 15:13:44 +0100 Subject: tty/serial: atmel: move atmel_serial header into driver directory atmel_serial.h is only used by atmel_serial.c, so there's no need for it to lie in include/linux. Suggested-by: Joe Perches Signed-off-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- include/linux/atmel_serial.h | 169 ------------------------------------------- 1 file changed, 169 deletions(-) delete mode 100644 include/linux/atmel_serial.h (limited to 'include/linux') diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h deleted file mode 100644 index bd2560502f3c..000000000000 --- a/include/linux/atmel_serial.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * include/linux/atmel_serial.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USART registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef ATMEL_SERIAL_H -#define ATMEL_SERIAL_H - -#define ATMEL_US_CR 0x00 /* Control Register */ -#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ -#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ -#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ -#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ -#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ -#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ -#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ -#define ATMEL_US_STTBRK BIT(9) /* Start Break */ -#define ATMEL_US_STPBRK BIT(10) /* Stop Break */ -#define ATMEL_US_STTTO BIT(11) /* Start Time-out */ -#define ATMEL_US_SENDA BIT(12) /* Send Address */ -#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ -#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ -#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ -#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ -#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ -#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ -#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ -#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ -#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ -#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ -#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ -#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ - -#define ATMEL_US_MR 0x04 /* Mode Register */ -#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ -#define ATMEL_US_USMODE_NORMAL 0 -#define ATMEL_US_USMODE_RS485 1 -#define ATMEL_US_USMODE_HWHS 2 -#define ATMEL_US_USMODE_MODEM 3 -#define ATMEL_US_USMODE_ISO7816_T0 4 -#define ATMEL_US_USMODE_ISO7816_T1 6 -#define ATMEL_US_USMODE_IRDA 8 -#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ -#define ATMEL_US_USCLKS_MCK (0 << 4) -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -#define ATMEL_US_USCLKS_SCK (3 << 4) -#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ -#define ATMEL_US_CHRL_5 (0 << 6) -#define ATMEL_US_CHRL_6 (1 << 6) -#define ATMEL_US_CHRL_7 (2 << 6) -#define ATMEL_US_CHRL_8 (3 << 6) -#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ -#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ -#define ATMEL_US_PAR_EVEN (0 << 9) -#define ATMEL_US_PAR_ODD (1 << 9) -#define ATMEL_US_PAR_SPACE (2 << 9) -#define ATMEL_US_PAR_MARK (3 << 9) -#define ATMEL_US_PAR_NONE (4 << 9) -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) -#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ -#define ATMEL_US_NBSTOP_1 (0 << 12) -#define ATMEL_US_NBSTOP_1_5 (1 << 12) -#define ATMEL_US_NBSTOP_2 (2 << 12) -#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ -#define ATMEL_US_CHMODE_NORMAL (0 << 14) -#define ATMEL_US_CHMODE_ECHO (1 << 14) -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) -#define ATMEL_US_MSBF BIT(16) /* Bit Order */ -#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ -#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ -#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ -#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ -#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ -#define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */ -#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ - -#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ -#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ -#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ -#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ -#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ -#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ -#define ATMEL_US_OVRE BIT(5) /* Overrun Error */ -#define ATMEL_US_FRAME BIT(6) /* Framing Error */ -#define ATMEL_US_PARE BIT(7) /* Parity Error */ -#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ -#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ -#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ -#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ -#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ -#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ -#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ -#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ -#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ -#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ -#define ATMEL_US_RI BIT(20) /* RI */ -#define ATMEL_US_DSR BIT(21) /* DSR */ -#define ATMEL_US_DCD BIT(22) /* DCD */ -#define ATMEL_US_CTS BIT(23) /* CTS */ - -#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ -#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ -#define ATMEL_US_CSR 0x14 /* Channel Status Register */ -#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ -#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ - -#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ -#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */ -#define ATMEL_US_FP_MASK 0x7 - -#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */ -#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */ -#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ - -#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ - -#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ -#define ATMEL_US_NER 0x44 /* Number of Errors Register */ -#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ - -#define ATMEL_US_CMPR 0x90 /* Comparaison Register */ -#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ -#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ -#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ -#define ATMEL_US_ONE_DATA 0x0 -#define ATMEL_US_TWO_DATA 0x1 -#define ATMEL_US_FOUR_DATA 0x2 -#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ -#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ -#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ -#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ - -#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ -#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ -#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ - -#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ -#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ -#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ -#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ -#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ -#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ -#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ -#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ -#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ -#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ -#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ -#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ -#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ -#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ - -#define ATMEL_US_NAME 0xf0 /* Ip Name */ -#define ATMEL_US_VERSION 0xfc /* Ip Version */ - -#endif -- cgit v1.2.3 From 9d1d994d33fe4863c8caeeaac264664815f4c321 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Thu, 16 Mar 2017 08:14:16 -0700 Subject: linux/serdev.h: Replace 'ctrl->serdev' with 'serdev' Replace 'ctrl->serdev' with 'serdev' in serdev_controller_write_wakeup() and serdev_controller_receive_buf(). Cc: Rob Herring Cc: cphealy@gmail.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Andrey Smirnov Signed-off-by: Greg Kroah-Hartman --- include/linux/serdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serdev.h b/include/linux/serdev.h index 9519da6253a8..5176cdc2057f 100644 --- a/include/linux/serdev.h +++ b/include/linux/serdev.h @@ -165,7 +165,7 @@ static inline void serdev_controller_write_wakeup(struct serdev_controller *ctrl if (!serdev || !serdev->ops->write_wakeup) return; - serdev->ops->write_wakeup(ctrl->serdev); + serdev->ops->write_wakeup(serdev); } static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl, @@ -177,7 +177,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl, if (!serdev || !serdev->ops->receive_buf) return -EINVAL; - return serdev->ops->receive_buf(ctrl->serdev, data, count); + return serdev->ops->receive_buf(serdev, data, count); } #if IS_ENABLED(CONFIG_SERIAL_DEV_BUS) -- cgit v1.2.3 From f7048b15900f36fe21398fba94777b8aab3b376d Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 24 Mar 2017 10:57:59 +0530 Subject: tty: serial_core: Add name field to uart_port struct Introduce a field to store name of uart_port that can be used to easily identify UART port instances on a system that has more than one UART instance. The name is of the form ttyXN(eg. ttyS0, ttyAMA0,..) where N is number that particular UART instance. This field will be useful when printing debug info for a particular port or in register IRQs with unique IRQ name. Port name is populated during uart_add_one_port(). Signed-off-by: Vignesh R Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 7 +++++++ include/linux/serial_core.h | 1 + 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0fb3f7cce62a..f5572e28d16a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2744,6 +2744,12 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) state->pm_state = UART_PM_STATE_UNDEFINED; uport->cons = drv->cons; uport->minor = drv->tty_driver->minor_start + uport->line; + uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name, + drv->tty_driver->name_base + uport->line); + if (!uport->name) { + ret = -ENOMEM; + goto out; + } /* * If this port is a console, then the spinlock is already @@ -2861,6 +2867,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) if (uport->type != PORT_UNKNOWN && uport->ops->release_port) uport->ops->release_port(uport); kfree(uport->tty_groups); + kfree(uport->name); /* * Indicate that there isn't a port here anymore. diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 58484fb35cc8..60530678c633 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -247,6 +247,7 @@ struct uart_port { unsigned char suspended; unsigned char irq_wake; unsigned char unused[2]; + char *name; /* port name */ struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ struct serial_rs485 rs485; -- cgit v1.2.3 From 6fe729c4bdae41b4c5a5ff21312f021a48c69399 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 4 Apr 2017 07:22:33 -0700 Subject: serdev: Add serdev_device_write subroutine Add serdev_device_write() a blocking call allowing to transfer arbitraty amount of data (potentially exceeding amount that serdev_device_write_buf can process in a single call) To support that, also add serdev_device_write_wakeup(). Drivers wanting to use full extent of serdev_device_write functionality are expected to provide serdev_device_write_wakeup() as a sole handler of .write_wakeup event or call it as a part of driver's custom .write_wakeup code. Because serdev_device_write() subroutine is a superset of serdev_device_write_buf() the patch re-impelements latter is terms of the former. For drivers wanting to just use serdev_device_write_buf() .write_wakeup handler is optional. Cc: cphealy@gmail.com Cc: Guenter Roeck Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Rob Herring Reviewed-by: Andy Shevchenko Signed-off-by: Andrey Smirnov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serdev/core.c | 36 +++++++++++++++++++++++++++++++----- include/linux/serdev.h | 17 +++++++++++++++-- 2 files changed, 46 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index f4c6c90add78..6701d1011fce 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -116,17 +116,41 @@ void serdev_device_close(struct serdev_device *serdev) } EXPORT_SYMBOL_GPL(serdev_device_close); -int serdev_device_write_buf(struct serdev_device *serdev, - const unsigned char *buf, size_t count) +void serdev_device_write_wakeup(struct serdev_device *serdev) +{ + complete(&serdev->write_comp); +} +EXPORT_SYMBOL_GPL(serdev_device_write_wakeup); + +int serdev_device_write(struct serdev_device *serdev, + const unsigned char *buf, size_t count, + unsigned long timeout) { struct serdev_controller *ctrl = serdev->ctrl; + int ret; - if (!ctrl || !ctrl->ops->write_buf) + if (!ctrl || !ctrl->ops->write_buf || + (timeout && !serdev->ops->write_wakeup)) return -EINVAL; - return ctrl->ops->write_buf(ctrl, buf, count); + mutex_lock(&serdev->write_lock); + do { + reinit_completion(&serdev->write_comp); + + ret = ctrl->ops->write_buf(ctrl, buf, count); + if (ret < 0) + break; + + buf += ret; + count -= ret; + + } while (count && + (timeout = wait_for_completion_timeout(&serdev->write_comp, + timeout))); + mutex_unlock(&serdev->write_lock); + return ret < 0 ? ret : (count ? -ETIMEDOUT : 0); } -EXPORT_SYMBOL_GPL(serdev_device_write_buf); +EXPORT_SYMBOL_GPL(serdev_device_write); void serdev_device_write_flush(struct serdev_device *serdev) { @@ -232,6 +256,8 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl) serdev->dev.parent = &ctrl->dev; serdev->dev.bus = &serdev_bus_type; serdev->dev.type = &serdev_device_type; + init_completion(&serdev->write_comp); + mutex_init(&serdev->write_lock); return serdev; } EXPORT_SYMBOL_GPL(serdev_device_alloc); diff --git a/include/linux/serdev.h b/include/linux/serdev.h index 5176cdc2057f..0beaff886992 100644 --- a/include/linux/serdev.h +++ b/include/linux/serdev.h @@ -39,12 +39,16 @@ struct serdev_device_ops { * @nr: Device number on serdev bus. * @ctrl: serdev controller managing this device. * @ops: Device operations. + * @write_comp Completion used by serdev_device_write() internally + * @write_lock Lock to serialize access when writing data */ struct serdev_device { struct device dev; int nr; struct serdev_controller *ctrl; const struct serdev_device_ops *ops; + struct completion write_comp; + struct mutex write_lock; }; static inline struct serdev_device *to_serdev_device(struct device *d) @@ -186,7 +190,8 @@ int serdev_device_open(struct serdev_device *); void serdev_device_close(struct serdev_device *); unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int); void serdev_device_set_flow_control(struct serdev_device *, bool); -int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t); +void serdev_device_write_wakeup(struct serdev_device *); +int serdev_device_write(struct serdev_device *, const unsigned char *, size_t, unsigned long); void serdev_device_write_flush(struct serdev_device *); int serdev_device_write_room(struct serdev_device *); @@ -223,7 +228,8 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev return 0; } static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {} -static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count) +static inline int serdev_device_write(struct serdev_device *sdev, const unsigned char *buf, + size_t count, unsigned long timeout) { return -ENODEV; } @@ -259,4 +265,11 @@ static inline struct device *serdev_tty_port_register(struct tty_port *port, static inline void serdev_tty_port_unregister(struct tty_port *port) {} #endif /* CONFIG_SERIAL_DEV_CTRL_TTYPORT */ +static inline int serdev_device_write_buf(struct serdev_device *serdev, + const unsigned char *data, + size_t count) +{ + return serdev_device_write(serdev, data, count, 0); +} + #endif /*_LINUX_SERDEV_H */ -- cgit v1.2.3 From 2e94d5ae5da1d2e798045a53b5e234a42b090908 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 31 Mar 2017 21:35:17 +0300 Subject: serial: core: constify struct uart_port {name} field Don't allow modifications of port name. It's serial core's business only. Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 60530678c633..64d892f1e5cd 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -247,7 +247,7 @@ struct uart_port { unsigned char suspended; unsigned char irq_wake; unsigned char unused[2]; - char *name; /* port name */ + const char *name; /* port name */ struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ struct serial_rs485 rs485; -- cgit v1.2.3 From 0c688614dcce84dfdbb305fd1c399c06cecea745 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Apr 2017 18:37:14 -0400 Subject: console: move console_init() out of tty_io.c All the console driver handling code lives in printk.c. Move console_init() there as well so console support can still be used when the TTY code is configured out. No logical changes from this patch. Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 24 ------------------------ include/linux/console.h | 2 ++ include/linux/tty.h | 7 ++++--- init/main.c | 2 +- kernel/printk/printk.c | 24 ++++++++++++++++++++++++ 5 files changed, 31 insertions(+), 28 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index dd0c1aa60402..8244b6199784 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3584,30 +3584,6 @@ void tty_default_fops(struct file_operations *fops) *fops = tty_fops; } -/* - * Initialize the console device. This is called *early*, so - * we can't necessarily depend on lots of kernel help here. - * Just do some early initializations, and do the complex setup - * later. - */ -void __init console_init(void) -{ - initcall_t *call; - - /* Setup the default TTY line discipline. */ - n_tty_init(); - - /* - * set up the console device so that later boot sequences can - * inform about problems etc.. - */ - call = __con_initcall_start; - while (call < __con_initcall_end) { - (*call)(); - call++; - } -} - static char *tty_devnode(struct device *dev, umode_t *mode) { if (!mode) diff --git a/include/linux/console.h b/include/linux/console.h index 5949d1855589..b8920a031a3e 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -212,4 +212,6 @@ extern bool vgacon_text_force(void); static inline bool vgacon_text_force(void) { return false; } #endif +extern void console_init(void); + #endif /* _LINUX_CONSOLE_H */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 1017e904c0a3..f1106d7c73b6 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -390,7 +390,6 @@ static inline bool tty_throttled(struct tty_struct *tty) } #ifdef CONFIG_TTY -extern void console_init(void); extern void tty_kref_put(struct tty_struct *tty); extern struct pid *tty_get_pgrp(struct tty_struct *tty); extern void tty_vhangup_self(void); @@ -402,8 +401,6 @@ extern struct tty_struct *get_current_tty(void); extern int __init tty_init(void); extern const char *tty_name(const struct tty_struct *tty); #else -static inline void console_init(void) -{ } static inline void tty_kref_put(struct tty_struct *tty) { } static inline struct pid *tty_get_pgrp(struct tty_struct *tty) @@ -669,7 +666,11 @@ extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, /* n_tty.c */ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); +#ifdef CONFIG_TTY extern void __init n_tty_init(void); +#else +static inline void n_tty_init(void) { } +#endif /* tty_audit.c */ #ifdef CONFIG_AUDIT diff --git a/init/main.c b/init/main.c index b0c11cbf5ddf..cfb7e6821b85 100644 --- a/init/main.c +++ b/init/main.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 2984fb0f0257..3a0940652660 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2610,6 +2610,30 @@ int unregister_console(struct console *console) } EXPORT_SYMBOL(unregister_console); +/* + * Initialize the console device. This is called *early*, so + * we can't necessarily depend on lots of kernel help here. + * Just do some early initializations, and do the complex setup + * later. + */ +void __init console_init(void) +{ + initcall_t *call; + + /* Setup the default TTY line discipline. */ + n_tty_init(); + + /* + * set up the console device so that later boot sequences can + * inform about problems etc.. + */ + call = __con_initcall_start; + while (call < __con_initcall_end) { + (*call)(); + call++; + } +} + /* * Some boot consoles access data that is in the init section and which will * be discarded after the initcalls have been run. To make sure that no code -- cgit v1.2.3 From a1235b3eb10086b8420f37bbb6c29436f55940ba Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Apr 2017 18:37:16 -0400 Subject: tty: split job control support into a file of its own This makes it easier for job control to become optional and/or usable independently from tty_io.c, as well as providing a nice purpose separation. No logical changes from this patch. Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/Makefile | 2 +- drivers/tty/tty_io.c | 547 +-------------------------------------------- drivers/tty/tty_jobctrl.c | 554 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/tty.h | 6 + 4 files changed, 572 insertions(+), 537 deletions(-) create mode 100644 drivers/tty/tty_jobctrl.c (limited to 'include/linux') diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 6983b5a49ec3..f02becdb3e33 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o \ - tty_ldsem.o tty_baudrate.o + tty_ldsem.o tty_baudrate.o tty_jobctrl.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 8244b6199784..0c150b5a9dd6 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -377,65 +377,6 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) EXPORT_SYMBOL_GPL(tty_find_polling_driver); #endif -static int is_ignored(int sig) -{ - return (sigismember(¤t->blocked, sig) || - current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); -} - -/** - * tty_check_change - check for POSIX terminal changes - * @tty: tty to check - * - * If we try to write to, or set the state of, a terminal and we're - * not in the foreground, send a SIGTTOU. If the signal is blocked or - * ignored, go ahead and perform the operation. (POSIX 7.2) - * - * Locking: ctrl_lock - */ - -int __tty_check_change(struct tty_struct *tty, int sig) -{ - unsigned long flags; - struct pid *pgrp, *tty_pgrp; - int ret = 0; - - if (current->signal->tty != tty) - return 0; - - rcu_read_lock(); - pgrp = task_pgrp(current); - - spin_lock_irqsave(&tty->ctrl_lock, flags); - tty_pgrp = tty->pgrp; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - - if (tty_pgrp && pgrp != tty->pgrp) { - if (is_ignored(sig)) { - if (sig == SIGTTIN) - ret = -EIO; - } else if (is_current_pgrp_orphaned()) - ret = -EIO; - else { - kill_pgrp(pgrp, sig, 1); - set_thread_flag(TIF_SIGPENDING); - ret = -ERESTARTSYS; - } - } - rcu_read_unlock(); - - if (!tty_pgrp) - tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig); - - return ret; -} - -int tty_check_change(struct tty_struct *tty) -{ - return __tty_check_change(tty, SIGTTOU); -} -EXPORT_SYMBOL(tty_check_change); - static ssize_t hung_up_tty_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -509,79 +450,6 @@ static const struct file_operations hung_up_tty_fops = { static DEFINE_SPINLOCK(redirect_lock); static struct file *redirect; - -void proc_clear_tty(struct task_struct *p) -{ - unsigned long flags; - struct tty_struct *tty; - spin_lock_irqsave(&p->sighand->siglock, flags); - tty = p->signal->tty; - p->signal->tty = NULL; - spin_unlock_irqrestore(&p->sighand->siglock, flags); - tty_kref_put(tty); -} - -/** - * proc_set_tty - set the controlling terminal - * - * Only callable by the session leader and only if it does not already have - * a controlling terminal. - * - * Caller must hold: tty_lock() - * a readlock on tasklist_lock - * sighand lock - */ -static void __proc_set_tty(struct tty_struct *tty) -{ - unsigned long flags; - - spin_lock_irqsave(&tty->ctrl_lock, flags); - /* - * The session and fg pgrp references will be non-NULL if - * tiocsctty() is stealing the controlling tty - */ - put_pid(tty->session); - put_pid(tty->pgrp); - tty->pgrp = get_pid(task_pgrp(current)); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - tty->session = get_pid(task_session(current)); - if (current->signal->tty) { - tty_debug(tty, "current tty %s not NULL!!\n", - current->signal->tty->name); - tty_kref_put(current->signal->tty); - } - put_pid(current->signal->tty_old_pgrp); - current->signal->tty = tty_kref_get(tty); - current->signal->tty_old_pgrp = NULL; -} - -static void proc_set_tty(struct tty_struct *tty) -{ - spin_lock_irq(¤t->sighand->siglock); - __proc_set_tty(tty); - spin_unlock_irq(¤t->sighand->siglock); -} - -struct tty_struct *get_current_tty(void) -{ - struct tty_struct *tty; - unsigned long flags; - - spin_lock_irqsave(¤t->sighand->siglock, flags); - tty = tty_kref_get(current->signal->tty); - spin_unlock_irqrestore(¤t->sighand->siglock, flags); - return tty; -} -EXPORT_SYMBOL_GPL(get_current_tty); - -static void session_clear_tty(struct pid *session) -{ - struct task_struct *p; - do_each_pid_task(session, PIDTYPE_SID, p) { - proc_clear_tty(p); - } while_each_pid_task(session, PIDTYPE_SID, p); -} - /** * tty_wakeup - request more data * @tty: terminal @@ -608,60 +476,6 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); -/** - * tty_signal_session_leader - sends SIGHUP to session leader - * @tty controlling tty - * @exit_session if non-zero, signal all foreground group processes - * - * Send SIGHUP and SIGCONT to the session leader and its process group. - * Optionally, signal all processes in the foreground process group. - * - * Returns the number of processes in the session with this tty - * as their controlling terminal. This value is used to drop - * tty references for those processes. - */ -static int tty_signal_session_leader(struct tty_struct *tty, int exit_session) -{ - struct task_struct *p; - int refs = 0; - struct pid *tty_pgrp = NULL; - - read_lock(&tasklist_lock); - if (tty->session) { - do_each_pid_task(tty->session, PIDTYPE_SID, p) { - spin_lock_irq(&p->sighand->siglock); - if (p->signal->tty == tty) { - p->signal->tty = NULL; - /* We defer the dereferences outside fo - the tasklist lock */ - refs++; - } - if (!p->signal->leader) { - spin_unlock_irq(&p->sighand->siglock); - continue; - } - __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p); - __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p); - put_pid(p->signal->tty_old_pgrp); /* A noop */ - spin_lock(&tty->ctrl_lock); - tty_pgrp = get_pid(tty->pgrp); - if (tty->pgrp) - p->signal->tty_old_pgrp = get_pid(tty->pgrp); - spin_unlock(&tty->ctrl_lock); - spin_unlock_irq(&p->sighand->siglock); - } while_each_pid_task(tty->session, PIDTYPE_SID, p); - } - read_unlock(&tasklist_lock); - - if (tty_pgrp) { - if (exit_session) - kill_pgrp(tty_pgrp, SIGHUP, exit_session); - put_pid(tty_pgrp); - } - - return refs; -} - /** * __tty_hangup - actual handler for hangup events * @work: tty device @@ -840,7 +654,7 @@ void tty_vhangup_self(void) * is complete. That guarantee is necessary for security reasons. */ -static void tty_vhangup_session(struct tty_struct *tty) +void tty_vhangup_session(struct tty_struct *tty) { tty_debug_hangup(tty, "session hangup\n"); __tty_hangup(tty, 1); @@ -861,106 +675,6 @@ int tty_hung_up_p(struct file *filp) EXPORT_SYMBOL(tty_hung_up_p); -/** - * disassociate_ctty - disconnect controlling tty - * @on_exit: true if exiting so need to "hang up" the session - * - * This function is typically called only by the session leader, when - * it wants to disassociate itself from its controlling tty. - * - * It performs the following functions: - * (1) Sends a SIGHUP and SIGCONT to the foreground process group - * (2) Clears the tty from being controlling the session - * (3) Clears the controlling tty for all processes in the - * session group. - * - * The argument on_exit is set to 1 if called when a process is - * exiting; it is 0 if called by the ioctl TIOCNOTTY. - * - * Locking: - * BTM is taken for hysterical raisins, and held when - * called from no_tty(). - * tty_mutex is taken to protect tty - * ->siglock is taken to protect ->signal/->sighand - * tasklist_lock is taken to walk process list for sessions - * ->siglock is taken to protect ->signal/->sighand - */ - -void disassociate_ctty(int on_exit) -{ - struct tty_struct *tty; - - if (!current->signal->leader) - return; - - tty = get_current_tty(); - if (tty) { - if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) { - tty_vhangup_session(tty); - } else { - struct pid *tty_pgrp = tty_get_pgrp(tty); - if (tty_pgrp) { - kill_pgrp(tty_pgrp, SIGHUP, on_exit); - if (!on_exit) - kill_pgrp(tty_pgrp, SIGCONT, on_exit); - put_pid(tty_pgrp); - } - } - tty_kref_put(tty); - - } else if (on_exit) { - struct pid *old_pgrp; - spin_lock_irq(¤t->sighand->siglock); - old_pgrp = current->signal->tty_old_pgrp; - current->signal->tty_old_pgrp = NULL; - spin_unlock_irq(¤t->sighand->siglock); - if (old_pgrp) { - kill_pgrp(old_pgrp, SIGHUP, on_exit); - kill_pgrp(old_pgrp, SIGCONT, on_exit); - put_pid(old_pgrp); - } - return; - } - - spin_lock_irq(¤t->sighand->siglock); - put_pid(current->signal->tty_old_pgrp); - current->signal->tty_old_pgrp = NULL; - - tty = tty_kref_get(current->signal->tty); - if (tty) { - unsigned long flags; - spin_lock_irqsave(&tty->ctrl_lock, flags); - put_pid(tty->session); - put_pid(tty->pgrp); - tty->session = NULL; - tty->pgrp = NULL; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - tty_kref_put(tty); - } else - tty_debug_hangup(tty, "no current tty\n"); - - spin_unlock_irq(¤t->sighand->siglock); - /* Now clear signal->tty under the lock */ - read_lock(&tasklist_lock); - session_clear_tty(task_session(current)); - read_unlock(&tasklist_lock); -} - -/** - * - * no_tty - Ensure the current process does not have a controlling tty - */ -void no_tty(void) -{ - /* FIXME: Review locking here. The tty_lock never covered any race - between a new association and proc_clear_tty but possible we need - to protect against this anyway */ - struct task_struct *tsk = current; - disassociate_ctty(0); - proc_clear_tty(tsk); -} - - /** * stop_tty - propagate flow control * @tty: tty to stop @@ -2163,38 +1877,13 @@ retry_open: } clear_bit(TTY_HUPPED, &tty->flags); - - read_lock(&tasklist_lock); - spin_lock_irq(¤t->sighand->siglock); noctty = (filp->f_flags & O_NOCTTY) || - (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) || - device == MKDEV(TTYAUX_MAJOR, 1) || - (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER); - - if (!noctty && - current->signal->leader && - !current->signal->tty && - tty->session == NULL) { - /* - * Don't let a process that only has write access to the tty - * obtain the privileges associated with having a tty as - * controlling terminal (being able to reopen it with full - * access through /dev/tty, being able to perform pushback). - * Many distributions set the group of all ttys to "tty" and - * grant write-only access to all terminals for setgid tty - * binaries, which should not imply full privileges on all ttys. - * - * This could theoretically break old code that performs open() - * on a write-only file descriptor. In that case, it might be - * necessary to also permit this if - * inode_permission(inode, MAY_READ) == 0. - */ - if (filp->f_mode & FMODE_READ) - __proc_set_tty(tty); - } - spin_unlock_irq(¤t->sighand->siglock); - read_unlock(&tasklist_lock); + (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) || + device == MKDEV(TTYAUX_MAJOR, 1) || + (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER); + if (!noctty) + tty_open_proc_set_tty(filp, tty); tty_unlock(tty); return 0; } @@ -2456,211 +2145,6 @@ static int fionbio(struct file *file, int __user *p) return 0; } -/** - * tiocsctty - set controlling tty - * @tty: tty structure - * @arg: user argument - * - * This ioctl is used to manage job control. It permits a session - * leader to set this tty as the controlling tty for the session. - * - * Locking: - * Takes tty_lock() to serialize proc_set_tty() for this tty - * Takes tasklist_lock internally to walk sessions - * Takes ->siglock() when updating signal->tty - */ - -static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) -{ - int ret = 0; - - tty_lock(tty); - read_lock(&tasklist_lock); - - if (current->signal->leader && (task_session(current) == tty->session)) - goto unlock; - - /* - * The process must be a session leader and - * not have a controlling tty already. - */ - if (!current->signal->leader || current->signal->tty) { - ret = -EPERM; - goto unlock; - } - - if (tty->session) { - /* - * This tty is already the controlling - * tty for another session group! - */ - if (arg == 1 && capable(CAP_SYS_ADMIN)) { - /* - * Steal it away - */ - session_clear_tty(tty->session); - } else { - ret = -EPERM; - goto unlock; - } - } - - /* See the comment in tty_open(). */ - if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { - ret = -EPERM; - goto unlock; - } - - proc_set_tty(tty); -unlock: - read_unlock(&tasklist_lock); - tty_unlock(tty); - return ret; -} - -/** - * tty_get_pgrp - return a ref counted pgrp pid - * @tty: tty to read - * - * Returns a refcounted instance of the pid struct for the process - * group controlling the tty. - */ - -struct pid *tty_get_pgrp(struct tty_struct *tty) -{ - unsigned long flags; - struct pid *pgrp; - - spin_lock_irqsave(&tty->ctrl_lock, flags); - pgrp = get_pid(tty->pgrp); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - - return pgrp; -} -EXPORT_SYMBOL_GPL(tty_get_pgrp); - -/* - * This checks not only the pgrp, but falls back on the pid if no - * satisfactory pgrp is found. I dunno - gdb doesn't work correctly - * without this... - * - * The caller must hold rcu lock or the tasklist lock. - */ -static struct pid *session_of_pgrp(struct pid *pgrp) -{ - struct task_struct *p; - struct pid *sid = NULL; - - p = pid_task(pgrp, PIDTYPE_PGID); - if (p == NULL) - p = pid_task(pgrp, PIDTYPE_PID); - if (p != NULL) - sid = task_session(p); - - return sid; -} - -/** - * tiocgpgrp - get process group - * @tty: tty passed by user - * @real_tty: tty side of the tty passed by the user if a pty else the tty - * @p: returned pid - * - * Obtain the process group of the tty. If there is no process group - * return an error. - * - * Locking: none. Reference to current->signal->tty is safe. - */ - -static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) -{ - struct pid *pid; - int ret; - /* - * (tty == real_tty) is a cheap way of - * testing if the tty is NOT a master pty. - */ - if (tty == real_tty && current->signal->tty != real_tty) - return -ENOTTY; - pid = tty_get_pgrp(real_tty); - ret = put_user(pid_vnr(pid), p); - put_pid(pid); - return ret; -} - -/** - * tiocspgrp - attempt to set process group - * @tty: tty passed by user - * @real_tty: tty side device matching tty passed by user - * @p: pid pointer - * - * Set the process group of the tty to the session passed. Only - * permitted where the tty session is our session. - * - * Locking: RCU, ctrl lock - */ - -static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) -{ - struct pid *pgrp; - pid_t pgrp_nr; - int retval = tty_check_change(real_tty); - - if (retval == -EIO) - return -ENOTTY; - if (retval) - return retval; - if (!current->signal->tty || - (current->signal->tty != real_tty) || - (real_tty->session != task_session(current))) - return -ENOTTY; - if (get_user(pgrp_nr, p)) - return -EFAULT; - if (pgrp_nr < 0) - return -EINVAL; - rcu_read_lock(); - pgrp = find_vpid(pgrp_nr); - retval = -ESRCH; - if (!pgrp) - goto out_unlock; - retval = -EPERM; - if (session_of_pgrp(pgrp) != task_session(current)) - goto out_unlock; - retval = 0; - spin_lock_irq(&tty->ctrl_lock); - put_pid(real_tty->pgrp); - real_tty->pgrp = get_pid(pgrp); - spin_unlock_irq(&tty->ctrl_lock); -out_unlock: - rcu_read_unlock(); - return retval; -} - -/** - * tiocgsid - get session id - * @tty: tty passed by user - * @real_tty: tty side of the tty passed by the user if a pty else the tty - * @p: pointer to returned session id - * - * Obtain the session id of the tty. If there is no session - * return an error. - * - * Locking: none. Reference to current->signal->tty is safe. - */ - -static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) -{ - /* - * (tty == real_tty) is a cheap way of - * testing if the tty is NOT a master pty. - */ - if (tty == real_tty && current->signal->tty != real_tty) - return -ENOTTY; - if (!real_tty->session) - return -ENOTTY; - return put_user(pid_vnr(real_tty->session), p); -} - /** * tiocsetd - set line discipline * @tty: tty device @@ -2920,19 +2404,6 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int excl = test_bit(TTY_EXCLUSIVE, &tty->flags); return put_user(excl, (int __user *)p); } - case TIOCNOTTY: - if (current->signal->tty != tty) - return -ENOTTY; - no_tty(); - return 0; - case TIOCSCTTY: - return tiocsctty(real_tty, file, arg); - case TIOCGPGRP: - return tiocgpgrp(tty, real_tty, p); - case TIOCSPGRP: - return tiocspgrp(tty, real_tty, p); - case TIOCGSID: - return tiocgsid(tty, real_tty, p); case TIOCGETD: return tiocgetd(tty, p); case TIOCSETD: @@ -2993,6 +2464,10 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCSSERIAL: tty_warn_deprecated_flags(p); break; + default: + retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg); + if (retval != -ENOIOCTLCMD) + return retval; } if (tty->ops->ioctl) { retval = tty->ops->ioctl(tty, cmd, arg); diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c new file mode 100644 index 000000000000..e7032309ee87 --- /dev/null +++ b/drivers/tty/tty_jobctrl.c @@ -0,0 +1,554 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int is_ignored(int sig) +{ + return (sigismember(¤t->blocked, sig) || + current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); +} + +/** + * tty_check_change - check for POSIX terminal changes + * @tty: tty to check + * + * If we try to write to, or set the state of, a terminal and we're + * not in the foreground, send a SIGTTOU. If the signal is blocked or + * ignored, go ahead and perform the operation. (POSIX 7.2) + * + * Locking: ctrl_lock + */ +int __tty_check_change(struct tty_struct *tty, int sig) +{ + unsigned long flags; + struct pid *pgrp, *tty_pgrp; + int ret = 0; + + if (current->signal->tty != tty) + return 0; + + rcu_read_lock(); + pgrp = task_pgrp(current); + + spin_lock_irqsave(&tty->ctrl_lock, flags); + tty_pgrp = tty->pgrp; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + if (tty_pgrp && pgrp != tty->pgrp) { + if (is_ignored(sig)) { + if (sig == SIGTTIN) + ret = -EIO; + } else if (is_current_pgrp_orphaned()) + ret = -EIO; + else { + kill_pgrp(pgrp, sig, 1); + set_thread_flag(TIF_SIGPENDING); + ret = -ERESTARTSYS; + } + } + rcu_read_unlock(); + + if (!tty_pgrp) + tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig); + + return ret; +} + +int tty_check_change(struct tty_struct *tty) +{ + return __tty_check_change(tty, SIGTTOU); +} +EXPORT_SYMBOL(tty_check_change); + +void proc_clear_tty(struct task_struct *p) +{ + unsigned long flags; + struct tty_struct *tty; + spin_lock_irqsave(&p->sighand->siglock, flags); + tty = p->signal->tty; + p->signal->tty = NULL; + spin_unlock_irqrestore(&p->sighand->siglock, flags); + tty_kref_put(tty); +} + +/** + * proc_set_tty - set the controlling terminal + * + * Only callable by the session leader and only if it does not already have + * a controlling terminal. + * + * Caller must hold: tty_lock() + * a readlock on tasklist_lock + * sighand lock + */ +static void __proc_set_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + /* + * The session and fg pgrp references will be non-NULL if + * tiocsctty() is stealing the controlling tty + */ + put_pid(tty->session); + put_pid(tty->pgrp); + tty->pgrp = get_pid(task_pgrp(current)); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + tty->session = get_pid(task_session(current)); + if (current->signal->tty) { + tty_debug(tty, "current tty %s not NULL!!\n", + current->signal->tty->name); + tty_kref_put(current->signal->tty); + } + put_pid(current->signal->tty_old_pgrp); + current->signal->tty = tty_kref_get(tty); + current->signal->tty_old_pgrp = NULL; +} + +static void proc_set_tty(struct tty_struct *tty) +{ + spin_lock_irq(¤t->sighand->siglock); + __proc_set_tty(tty); + spin_unlock_irq(¤t->sighand->siglock); +} + +/* + * Called by tty_open() to set the controlling tty if applicable. + */ +void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty) +{ + read_lock(&tasklist_lock); + spin_lock_irq(¤t->sighand->siglock); + if (current->signal->leader && + !current->signal->tty && + tty->session == NULL) { + /* + * Don't let a process that only has write access to the tty + * obtain the privileges associated with having a tty as + * controlling terminal (being able to reopen it with full + * access through /dev/tty, being able to perform pushback). + * Many distributions set the group of all ttys to "tty" and + * grant write-only access to all terminals for setgid tty + * binaries, which should not imply full privileges on all ttys. + * + * This could theoretically break old code that performs open() + * on a write-only file descriptor. In that case, it might be + * necessary to also permit this if + * inode_permission(inode, MAY_READ) == 0. + */ + if (filp->f_mode & FMODE_READ) + __proc_set_tty(tty); + } + spin_unlock_irq(¤t->sighand->siglock); + read_unlock(&tasklist_lock); +} + +struct tty_struct *get_current_tty(void) +{ + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(¤t->sighand->siglock, flags); + tty = tty_kref_get(current->signal->tty); + spin_unlock_irqrestore(¤t->sighand->siglock, flags); + return tty; +} +EXPORT_SYMBOL_GPL(get_current_tty); + +/* + * Called from tty_release(). + */ +void session_clear_tty(struct pid *session) +{ + struct task_struct *p; + do_each_pid_task(session, PIDTYPE_SID, p) { + proc_clear_tty(p); + } while_each_pid_task(session, PIDTYPE_SID, p); +} + +/** + * tty_signal_session_leader - sends SIGHUP to session leader + * @tty controlling tty + * @exit_session if non-zero, signal all foreground group processes + * + * Send SIGHUP and SIGCONT to the session leader and its process group. + * Optionally, signal all processes in the foreground process group. + * + * Returns the number of processes in the session with this tty + * as their controlling terminal. This value is used to drop + * tty references for those processes. + */ +int tty_signal_session_leader(struct tty_struct *tty, int exit_session) +{ + struct task_struct *p; + int refs = 0; + struct pid *tty_pgrp = NULL; + + read_lock(&tasklist_lock); + if (tty->session) { + do_each_pid_task(tty->session, PIDTYPE_SID, p) { + spin_lock_irq(&p->sighand->siglock); + if (p->signal->tty == tty) { + p->signal->tty = NULL; + /* We defer the dereferences outside fo + the tasklist lock */ + refs++; + } + if (!p->signal->leader) { + spin_unlock_irq(&p->sighand->siglock); + continue; + } + __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p); + __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p); + put_pid(p->signal->tty_old_pgrp); /* A noop */ + spin_lock(&tty->ctrl_lock); + tty_pgrp = get_pid(tty->pgrp); + if (tty->pgrp) + p->signal->tty_old_pgrp = get_pid(tty->pgrp); + spin_unlock(&tty->ctrl_lock); + spin_unlock_irq(&p->sighand->siglock); + } while_each_pid_task(tty->session, PIDTYPE_SID, p); + } + read_unlock(&tasklist_lock); + + if (tty_pgrp) { + if (exit_session) + kill_pgrp(tty_pgrp, SIGHUP, exit_session); + put_pid(tty_pgrp); + } + + return refs; +} + +/** + * disassociate_ctty - disconnect controlling tty + * @on_exit: true if exiting so need to "hang up" the session + * + * This function is typically called only by the session leader, when + * it wants to disassociate itself from its controlling tty. + * + * It performs the following functions: + * (1) Sends a SIGHUP and SIGCONT to the foreground process group + * (2) Clears the tty from being controlling the session + * (3) Clears the controlling tty for all processes in the + * session group. + * + * The argument on_exit is set to 1 if called when a process is + * exiting; it is 0 if called by the ioctl TIOCNOTTY. + * + * Locking: + * BTM is taken for hysterical raisons, and held when + * called from no_tty(). + * tty_mutex is taken to protect tty + * ->siglock is taken to protect ->signal/->sighand + * tasklist_lock is taken to walk process list for sessions + * ->siglock is taken to protect ->signal/->sighand + */ +void disassociate_ctty(int on_exit) +{ + struct tty_struct *tty; + + if (!current->signal->leader) + return; + + tty = get_current_tty(); + if (tty) { + if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) { + tty_vhangup_session(tty); + } else { + struct pid *tty_pgrp = tty_get_pgrp(tty); + if (tty_pgrp) { + kill_pgrp(tty_pgrp, SIGHUP, on_exit); + if (!on_exit) + kill_pgrp(tty_pgrp, SIGCONT, on_exit); + put_pid(tty_pgrp); + } + } + tty_kref_put(tty); + + } else if (on_exit) { + struct pid *old_pgrp; + spin_lock_irq(¤t->sighand->siglock); + old_pgrp = current->signal->tty_old_pgrp; + current->signal->tty_old_pgrp = NULL; + spin_unlock_irq(¤t->sighand->siglock); + if (old_pgrp) { + kill_pgrp(old_pgrp, SIGHUP, on_exit); + kill_pgrp(old_pgrp, SIGCONT, on_exit); + put_pid(old_pgrp); + } + return; + } + + spin_lock_irq(¤t->sighand->siglock); + put_pid(current->signal->tty_old_pgrp); + current->signal->tty_old_pgrp = NULL; + + tty = tty_kref_get(current->signal->tty); + if (tty) { + unsigned long flags; + spin_lock_irqsave(&tty->ctrl_lock, flags); + put_pid(tty->session); + put_pid(tty->pgrp); + tty->session = NULL; + tty->pgrp = NULL; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + tty_kref_put(tty); + } + + spin_unlock_irq(¤t->sighand->siglock); + /* Now clear signal->tty under the lock */ + read_lock(&tasklist_lock); + session_clear_tty(task_session(current)); + read_unlock(&tasklist_lock); +} + +/** + * + * no_tty - Ensure the current process does not have a controlling tty + */ +void no_tty(void) +{ + /* FIXME: Review locking here. The tty_lock never covered any race + between a new association and proc_clear_tty but possible we need + to protect against this anyway */ + struct task_struct *tsk = current; + disassociate_ctty(0); + proc_clear_tty(tsk); +} + +/** + * tiocsctty - set controlling tty + * @tty: tty structure + * @arg: user argument + * + * This ioctl is used to manage job control. It permits a session + * leader to set this tty as the controlling tty for the session. + * + * Locking: + * Takes tty_lock() to serialize proc_set_tty() for this tty + * Takes tasklist_lock internally to walk sessions + * Takes ->siglock() when updating signal->tty + */ +static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) +{ + int ret = 0; + + tty_lock(tty); + read_lock(&tasklist_lock); + + if (current->signal->leader && (task_session(current) == tty->session)) + goto unlock; + + /* + * The process must be a session leader and + * not have a controlling tty already. + */ + if (!current->signal->leader || current->signal->tty) { + ret = -EPERM; + goto unlock; + } + + if (tty->session) { + /* + * This tty is already the controlling + * tty for another session group! + */ + if (arg == 1 && capable(CAP_SYS_ADMIN)) { + /* + * Steal it away + */ + session_clear_tty(tty->session); + } else { + ret = -EPERM; + goto unlock; + } + } + + /* See the comment in tty_open_proc_set_tty(). */ + if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto unlock; + } + + proc_set_tty(tty); +unlock: + read_unlock(&tasklist_lock); + tty_unlock(tty); + return ret; +} + +/** + * tty_get_pgrp - return a ref counted pgrp pid + * @tty: tty to read + * + * Returns a refcounted instance of the pid struct for the process + * group controlling the tty. + */ +struct pid *tty_get_pgrp(struct tty_struct *tty) +{ + unsigned long flags; + struct pid *pgrp; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + pgrp = get_pid(tty->pgrp); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + return pgrp; +} +EXPORT_SYMBOL_GPL(tty_get_pgrp); + +/* + * This checks not only the pgrp, but falls back on the pid if no + * satisfactory pgrp is found. I dunno - gdb doesn't work correctly + * without this... + * + * The caller must hold rcu lock or the tasklist lock. + */ +static struct pid *session_of_pgrp(struct pid *pgrp) +{ + struct task_struct *p; + struct pid *sid = NULL; + + p = pid_task(pgrp, PIDTYPE_PGID); + if (p == NULL) + p = pid_task(pgrp, PIDTYPE_PID); + if (p != NULL) + sid = task_session(p); + + return sid; +} + +/** + * tiocgpgrp - get process group + * @tty: tty passed by user + * @real_tty: tty side of the tty passed by the user if a pty else the tty + * @p: returned pid + * + * Obtain the process group of the tty. If there is no process group + * return an error. + * + * Locking: none. Reference to current->signal->tty is safe. + */ +static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + struct pid *pid; + int ret; + /* + * (tty == real_tty) is a cheap way of + * testing if the tty is NOT a master pty. + */ + if (tty == real_tty && current->signal->tty != real_tty) + return -ENOTTY; + pid = tty_get_pgrp(real_tty); + ret = put_user(pid_vnr(pid), p); + put_pid(pid); + return ret; +} + +/** + * tiocspgrp - attempt to set process group + * @tty: tty passed by user + * @real_tty: tty side device matching tty passed by user + * @p: pid pointer + * + * Set the process group of the tty to the session passed. Only + * permitted where the tty session is our session. + * + * Locking: RCU, ctrl lock + */ +static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + struct pid *pgrp; + pid_t pgrp_nr; + int retval = tty_check_change(real_tty); + + if (retval == -EIO) + return -ENOTTY; + if (retval) + return retval; + if (!current->signal->tty || + (current->signal->tty != real_tty) || + (real_tty->session != task_session(current))) + return -ENOTTY; + if (get_user(pgrp_nr, p)) + return -EFAULT; + if (pgrp_nr < 0) + return -EINVAL; + rcu_read_lock(); + pgrp = find_vpid(pgrp_nr); + retval = -ESRCH; + if (!pgrp) + goto out_unlock; + retval = -EPERM; + if (session_of_pgrp(pgrp) != task_session(current)) + goto out_unlock; + retval = 0; + spin_lock_irq(&tty->ctrl_lock); + put_pid(real_tty->pgrp); + real_tty->pgrp = get_pid(pgrp); + spin_unlock_irq(&tty->ctrl_lock); +out_unlock: + rcu_read_unlock(); + return retval; +} + +/** + * tiocgsid - get session id + * @tty: tty passed by user + * @real_tty: tty side of the tty passed by the user if a pty else the tty + * @p: pointer to returned session id + * + * Obtain the session id of the tty. If there is no session + * return an error. + * + * Locking: none. Reference to current->signal->tty is safe. + */ +static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + /* + * (tty == real_tty) is a cheap way of + * testing if the tty is NOT a master pty. + */ + if (tty == real_tty && current->signal->tty != real_tty) + return -ENOTTY; + if (!real_tty->session) + return -ENOTTY; + return put_user(pid_vnr(real_tty->session), p); +} + +/* + * Called from tty_ioctl(). If tty is a pty then real_tty is the slave side, + * if not then tty == real_tty. + */ +long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *p = (void __user *)arg; + + switch (cmd) { + case TIOCNOTTY: + if (current->signal->tty != tty) + return -ENOTTY; + no_tty(); + return 0; + case TIOCSCTTY: + return tiocsctty(real_tty, file, arg); + case TIOCGPGRP: + return tiocgpgrp(tty, real_tty, p); + case TIOCSPGRP: + return tiocspgrp(tty, real_tty, p); + case TIOCGSID: + return tiocgsid(tty, real_tty, p); + } + return -ENOIOCTLCMD; +} diff --git a/include/linux/tty.h b/include/linux/tty.h index f1106d7c73b6..d07cd2105a6c 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -475,9 +475,13 @@ extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern int is_current_pgrp_orphaned(void); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); +extern void tty_vhangup_session(struct tty_struct *tty); extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); +extern void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); +extern int tty_signal_session_leader(struct tty_struct *tty, int exit_session); +extern void session_clear_tty(struct pid *session); extern void no_tty(void); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); @@ -525,6 +529,8 @@ extern void tty_ldisc_flush(struct tty_struct *tty); extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +extern long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg); extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); extern void tty_default_fops(struct file_operations *fops); extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx); -- cgit v1.2.3