From 4262e5ccbbb5171abd2921eed16ed339633d6478 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 6 Dec 2013 11:36:16 +0100 Subject: net: dev: move inline skb_needs_linearize helper to header As we need it elsewhere, move the inline helper function of skb_needs_linearize() over to skbuff.h include file. While at it, also convert the return to 'bool' instead of 'int' and add a proper kernel doc. Signed-off-by: Daniel Borkmann Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- include/linux/skbuff.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 215b5ea1cb30..77c7aae1c6b2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2392,6 +2392,24 @@ static inline void *skb_header_pointer(const struct sk_buff *skb, int offset, return buffer; } +/** + * skb_needs_linearize - check if we need to linearize a given skb + * depending on the given device features. + * @skb: socket buffer to check + * @features: net device features + * + * Returns true if either: + * 1. skb has frag_list and the device doesn't support FRAGLIST, or + * 2. skb is fragmented and the device does not support SG. + */ +static inline bool skb_needs_linearize(struct sk_buff *skb, + netdev_features_t features) +{ + return skb_is_nonlinear(skb) && + ((skb_has_frag_list(skb) && !(features & NETIF_F_FRAGLIST)) || + (skb_shinfo(skb)->nr_frags && !(features & NETIF_F_SG))); +} + static inline void skb_copy_from_linear_data(const struct sk_buff *skb, void *to, const unsigned int len) -- cgit v1.2.1 From 3958afa1b272eb07109fd31549e69193b4d7c364 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Sun, 15 Dec 2013 22:12:06 -0800 Subject: net: Change skb_get_rxhash to skb_get_hash Changing name of function as part of making the hash in skbuff to be generic property, not just for receive path. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 77c7aae1c6b2..4725b953e00d 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -703,11 +703,11 @@ unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, unsigned int to, struct ts_config *config, struct ts_state *state); -void __skb_get_rxhash(struct sk_buff *skb); -static inline __u32 skb_get_rxhash(struct sk_buff *skb) +void __skb_get_hash(struct sk_buff *skb); +static inline __u32 skb_get_hash(struct sk_buff *skb) { if (!skb->l4_rxhash) - __skb_get_rxhash(skb); + __skb_get_hash(skb); return skb->rxhash; } -- cgit v1.2.1 From 7539fadcb8146a5f0db51e80d99c9e724efec7b0 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Sun, 15 Dec 2013 22:12:18 -0800 Subject: net: Add utility functions to clear rxhash In several places 'skb->rxhash = 0' is being done to clear the rxhash value in an skb. This does not clear l4_rxhash which could still be set so that the rxhash wouldn't be recalculated on subsequent call to skb_get_rxhash. This patch adds an explict function to clear all the rxhash related information in the skb properly. skb_clear_hash_if_not_l4 clears the rxhash only if it is not marked as l4_rxhash. Fixed up places where 'skb->rxhash = 0' was being called. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 4725b953e00d..7deb7ad65914 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -712,6 +712,18 @@ static inline __u32 skb_get_hash(struct sk_buff *skb) return skb->rxhash; } +static inline void skb_clear_hash(struct sk_buff *skb) +{ + skb->rxhash = 0; + skb->l4_rxhash = 0; +} + +static inline void skb_clear_hash_if_not_l4(struct sk_buff *skb) +{ + if (!skb->l4_rxhash) + skb_clear_hash(skb); +} + #ifdef NET_SKBUFF_DATA_USES_OFFSET static inline unsigned char *skb_end_pointer(const struct sk_buff *skb) { -- cgit v1.2.1 From 09323cc479316e046931a2c679932204b36fea6c Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Sun, 15 Dec 2013 22:16:19 -0800 Subject: net: Add function to set the rxhash The function skb_set_rxash was added for drivers to call to set the rxhash in an skb. The type of hash is also specified as a parameter (L2, L3, L4, or unknown type). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7deb7ad65914..99846956dff9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -703,6 +703,46 @@ unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, unsigned int to, struct ts_config *config, struct ts_state *state); +/* + * Packet hash types specify the type of hash in skb_set_hash. + * + * Hash types refer to the protocol layer addresses which are used to + * construct a packet's hash. The hashes are used to differentiate or identify + * flows of the protocol layer for the hash type. Hash types are either + * layer-2 (L2), layer-3 (L3), or layer-4 (L4). + * + * Properties of hashes: + * + * 1) Two packets in different flows have different hash values + * 2) Two packets in the same flow should have the same hash value + * + * A hash at a higher layer is considered to be more specific. A driver should + * set the most specific hash possible. + * + * A driver cannot indicate a more specific hash than the layer at which a hash + * was computed. For instance an L3 hash cannot be set as an L4 hash. + * + * A driver may indicate a hash level which is less specific than the + * actual layer the hash was computed on. For instance, a hash computed + * at L4 may be considered an L3 hash. This should only be done if the + * driver can't unambiguously determine that the HW computed the hash at + * the higher layer. Note that the "should" in the second property above + * permits this. + */ +enum pkt_hash_types { + PKT_HASH_TYPE_NONE, /* Undefined type */ + PKT_HASH_TYPE_L2, /* Input: src_MAC, dest_MAC */ + PKT_HASH_TYPE_L3, /* Input: src_IP, dst_IP */ + PKT_HASH_TYPE_L4, /* Input: src_IP, dst_IP, src_port, dst_port */ +}; + +static inline void +skb_set_hash(struct sk_buff *skb, __u32 hash, enum pkt_hash_types type) +{ + skb->l4_rxhash = (type == PKT_HASH_TYPE_L4); + skb->rxhash = hash; +} + void __skb_get_hash(struct sk_buff *skb); static inline __u32 skb_get_hash(struct sk_buff *skb) { -- cgit v1.2.1 From 3df7a74e797aa2d8be9b7c649cfd56a8517dcf6e Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Sun, 15 Dec 2013 22:16:29 -0800 Subject: net: Add utility function to copy skb hash Adds skb_copy_hash to copy rxhash and l4_rxhash from one skb to another. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 99846956dff9..06bedeb0d49e 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -764,6 +764,12 @@ static inline void skb_clear_hash_if_not_l4(struct sk_buff *skb) skb_clear_hash(skb); } +static inline void skb_copy_hash(struct sk_buff *to, const struct sk_buff *from) +{ + to->rxhash = from->rxhash; + to->l4_rxhash = from->l4_rxhash; +}; + #ifdef NET_SKBUFF_DATA_USES_OFFSET static inline unsigned char *skb_end_pointer(const struct sk_buff *skb) { -- cgit v1.2.1 From 0e3da5bb8da45890b1dc413404e0f978ab71173e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Mon, 16 Dec 2013 11:02:09 +0200 Subject: ip_gre: fix msg_name parsing for recvfrom/recvmsg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c54419321455 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar Signed-off-by: Timo Teräs Signed-off-by: David S. Miller --- include/linux/skbuff.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 215b5ea1cb30..6aae83890520 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1638,6 +1638,11 @@ static inline void skb_set_mac_header(struct sk_buff *skb, const int offset) skb->mac_header += offset; } +static inline void skb_pop_mac_header(struct sk_buff *skb) +{ + skb->mac_header = skb->network_header; +} + static inline void skb_probe_transport_header(struct sk_buff *skb, const int offset_hint) { -- cgit v1.2.1 From 78ea85f17b15390e30d8b47488ec7b6cf0790663 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 16 Dec 2013 23:27:09 +0100 Subject: net: skbuff: improve comment on checksumming It can be a bit confusing when looking for checksumming flags that the actual comment for this resides elsewhere further below in the header file. Thus, bring the documentation where we define these flags, and slightly improve the doc text to make it a bit more clear/readable. Also, whitespace-align values of the define while at it. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- include/linux/skbuff.h | 131 ++++++++++++++++++++++++++++--------------------- 1 file changed, 75 insertions(+), 56 deletions(-) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 06bedeb0d49e..c5cd016f5120 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -34,11 +34,82 @@ #include #include +/* A. Checksumming of received packets by device. + * + * CHECKSUM_NONE: + * + * Device failed to checksum this packet e.g. due to lack of capabilities. + * The packet contains full (though not verified) checksum in packet but + * not in skb->csum. Thus, skb->csum is undefined in this case. + * + * CHECKSUM_UNNECESSARY: + * + * The hardware you're dealing with doesn't calculate the full checksum + * (as in CHECKSUM_COMPLETE), but it does parse headers and verify checksums + * for specific protocols e.g. TCP/UDP/SCTP, then, for such packets it will + * set CHECKSUM_UNNECESSARY if their checksums are okay. skb->csum is still + * undefined in this case though. It is a bad option, but, unfortunately, + * nowadays most vendors do this. Apparently with the secret goal to sell + * you new devices, when you will add new protocol to your host, f.e. IPv6 8) + * + * CHECKSUM_COMPLETE: + * + * This is the most generic way. The device supplied checksum of the _whole_ + * packet as seen by netif_rx() and fills out in skb->csum. Meaning, the + * hardware doesn't need to parse L3/L4 headers to implement this. + * + * Note: Even if device supports only some protocols, but is able to produce + * skb->csum, it MUST use CHECKSUM_COMPLETE, not CHECKSUM_UNNECESSARY. + * + * CHECKSUM_PARTIAL: + * + * This is identical to the case for output below. This may occur on a packet + * received directly from another Linux OS, e.g., a virtualized Linux kernel + * on the same host. The packet can be treated in the same way as + * CHECKSUM_UNNECESSARY, except that on output (i.e., forwarding) the + * checksum must be filled in by the OS or the hardware. + * + * B. Checksumming on output. + * + * CHECKSUM_NONE: + * + * The skb was already checksummed by the protocol, or a checksum is not + * required. + * + * CHECKSUM_PARTIAL: + * + * The device is required to checksum the packet as seen by hard_start_xmit() + * from skb->csum_start up to the end, and to record/write the checksum at + * offset skb->csum_start + skb->csum_offset. + * + * The device must show its capabilities in dev->features, set up at device + * setup time, e.g. netdev_features.h: + * + * NETIF_F_HW_CSUM - It's a clever device, it's able to checksum everything. + * NETIF_F_IP_CSUM - Device is dumb, it's able to checksum only TCP/UDP over + * IPv4. Sigh. Vendors like this way for an unknown reason. + * Though, see comment above about CHECKSUM_UNNECESSARY. 8) + * NETIF_F_IPV6_CSUM - About as dumb as the last one but does IPv6 instead. + * NETIF_F_... - Well, you get the picture. + * + * CHECKSUM_UNNECESSARY: + * + * Normally, the device will do per protocol specific checksumming. Protocol + * implementations that do not want the NIC to perform the checksum + * calculation should use this flag in their outgoing skbs. + * + * NETIF_F_FCOE_CRC - This indicates that the device can do FCoE FC CRC + * offload. Correspondingly, the FCoE protocol driver + * stack should use CHECKSUM_UNNECESSARY. + * + * Any questions? No questions, good. --ANK + */ + /* Don't change this without changing skb_csum_unnecessary! */ -#define CHECKSUM_NONE 0 -#define CHECKSUM_UNNECESSARY 1 -#define CHECKSUM_COMPLETE 2 -#define CHECKSUM_PARTIAL 3 +#define CHECKSUM_NONE 0 +#define CHECKSUM_UNNECESSARY 1 +#define CHECKSUM_COMPLETE 2 +#define CHECKSUM_PARTIAL 3 #define SKB_DATA_ALIGN(X) (((X) + (SMP_CACHE_BYTES - 1)) & \ ~(SMP_CACHE_BYTES - 1)) @@ -54,58 +125,6 @@ SKB_DATA_ALIGN(sizeof(struct sk_buff)) + \ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) -/* A. Checksumming of received packets by device. - * - * NONE: device failed to checksum this packet. - * skb->csum is undefined. - * - * UNNECESSARY: device parsed packet and wouldbe verified checksum. - * skb->csum is undefined. - * It is bad option, but, unfortunately, many of vendors do this. - * Apparently with secret goal to sell you new device, when you - * will add new protocol to your host. F.e. IPv6. 8) - * - * COMPLETE: the most generic way. Device supplied checksum of _all_ - * the packet as seen by netif_rx in skb->csum. - * NOTE: Even if device supports only some protocols, but - * is able to produce some skb->csum, it MUST use COMPLETE, - * not UNNECESSARY. - * - * PARTIAL: identical to the case for output below. This may occur - * on a packet received directly from another Linux OS, e.g., - * a virtualised Linux kernel on the same host. The packet can - * be treated in the same way as UNNECESSARY except that on - * output (i.e., forwarding) the checksum must be filled in - * by the OS or the hardware. - * - * B. Checksumming on output. - * - * NONE: skb is checksummed by protocol or csum is not required. - * - * PARTIAL: device is required to csum packet as seen by hard_start_xmit - * from skb->csum_start to the end and to record the checksum - * at skb->csum_start + skb->csum_offset. - * - * Device must show its capabilities in dev->features, set - * at device setup time. - * NETIF_F_HW_CSUM - it is clever device, it is able to checksum - * everything. - * NETIF_F_IP_CSUM - device is dumb. It is able to csum only - * TCP/UDP over IPv4. Sigh. Vendors like this - * way by an unknown reason. Though, see comment above - * about CHECKSUM_UNNECESSARY. 8) - * NETIF_F_IPV6_CSUM about as dumb as the last one but does IPv6 instead. - * - * UNNECESSARY: device will do per protocol specific csum. Protocol drivers - * that do not want net to perform the checksum calculation should use - * this flag in their outgoing skbs. - * NETIF_F_FCOE_CRC this indicates the device can do FCoE FC CRC - * offload. Correspondingly, the FCoE protocol driver - * stack should use CHECKSUM_UNNECESSARY. - * - * Any questions? No questions, good. --ANK - */ - struct net_device; struct scatterlist; struct pipe_inode_info; -- cgit v1.2.1 From 73409f3b0ff0ae7bc1f647936b23e6d5d5dcbe28 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 27 Dec 2013 13:04:33 -0500 Subject: net: Add some clarification to skb_tx_timestamp() comment. We've seen so many instances of people invoking skb_tx_timestamp() after the device already has been given the packet, that it's worth being a little bit more verbose and explicit in this comment. Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6aae83890520..6f69b3f914fb 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2531,6 +2531,10 @@ static inline void sw_tx_timestamp(struct sk_buff *skb) * Ethernet MAC Drivers should call this function in their hard_xmit() * function immediately before giving the sk_buff to the MAC hardware. * + * Specifically, one should make absolutely sure that this function is + * called before TX completion of this packet can trigger. Otherwise + * the packet could potentially already be freed. + * * @skb: A socket buffer. */ static inline void skb_tx_timestamp(struct sk_buff *skb) -- cgit v1.2.1 From af2806f8f90a150160be898cd85332459c83c5cb Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Fri, 13 Dec 2013 15:22:17 +0100 Subject: net: Export skb_zerocopy() to zerocopy from one skb to another Make the skb zerocopy logic written for nfnetlink queue available for use by other modules. Signed-off-by: Thomas Graf Reviewed-by: Daniel Borkmann Acked-by: David S. Miller Signed-off-by: Jesse Gross --- include/linux/skbuff.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index bec1cc7d5e3c..7c48e2d4c72b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2345,6 +2345,9 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct pipe_inode_info *pipe, unsigned int len, unsigned int flags); void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to); +unsigned int skb_zerocopy_headlen(const struct sk_buff *from); +void skb_zerocopy(struct sk_buff *to, const struct sk_buff *from, + int len, int hlen); void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len); int skb_shift(struct sk_buff *tgt, struct sk_buff *skb, int shiftlen); void skb_scrub_packet(struct sk_buff *skb, bool xnet); -- cgit v1.2.1 From fd44b93cb5eee218231f6ce5883df937b3b9c3eb Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 7 Jan 2014 23:23:44 +0100 Subject: net: skbuff: const-ify casts in skb_queue_* functions We should const-ify comparisons on skb_queue_* inline helper functions as their parameters are const as well, so lets not drop that. Suggested-by: Brad Spengler Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 956e11a168d8..d97f2d07d02b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -827,7 +827,7 @@ static inline struct skb_shared_hwtstamps *skb_hwtstamps(struct sk_buff *skb) */ static inline int skb_queue_empty(const struct sk_buff_head *list) { - return list->next == (struct sk_buff *)list; + return list->next == (const struct sk_buff *) list; } /** @@ -840,7 +840,7 @@ static inline int skb_queue_empty(const struct sk_buff_head *list) static inline bool skb_queue_is_last(const struct sk_buff_head *list, const struct sk_buff *skb) { - return skb->next == (struct sk_buff *)list; + return skb->next == (const struct sk_buff *) list; } /** @@ -853,7 +853,7 @@ static inline bool skb_queue_is_last(const struct sk_buff_head *list, static inline bool skb_queue_is_first(const struct sk_buff_head *list, const struct sk_buff *skb) { - return skb->prev == (struct sk_buff *)list; + return skb->prev == (const struct sk_buff *) list; } /** -- cgit v1.2.1 From ed1f50c3a7c1ad1b1b4d584308eab77d57a330f8 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Thu, 9 Jan 2014 10:02:46 +0000 Subject: net: add skb_checksum_setup This patch adds a function to set up the partial checksum offset for IP packets (and optionally re-calculate the pseudo-header checksum) into the core network code. The implementation was previously private and duplicated between xen-netback and xen-netfront, however it is not xen-specific and is potentially useful to any network driver. Signed-off-by: Paul Durrant Cc: David Miller Cc: Eric Dumazet Cc: Veaceslav Falico Cc: Alexander Duyck Cc: Nicolas Dichtel Signed-off-by: David S. Miller --- include/linux/skbuff.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index d97f2d07d02b..48b760505cb6 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2893,6 +2893,8 @@ static inline void skb_checksum_none_assert(const struct sk_buff *skb) bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off); +int skb_checksum_setup(struct sk_buff *skb, bool recalculate); + u32 __skb_get_poff(const struct sk_buff *skb); /** -- cgit v1.2.1 From 57bdf7f42be05640f8080b06844c94367ad1884b Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Wed, 15 Jan 2014 08:57:54 -0800 Subject: net: Add skb_get_hash_raw Function to just return skb->rxhash without checking to see if it needs to be recomputed. Signed-off-by: Tom Herbert Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 48b760505cb6..1f689e62e4cb 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -771,6 +771,11 @@ static inline __u32 skb_get_hash(struct sk_buff *skb) return skb->rxhash; } +static inline __u32 skb_get_hash_raw(const struct sk_buff *skb) +{ + return skb->rxhash; +} + static inline void skb_clear_hash(struct sk_buff *skb) { skb->rxhash = 0; -- cgit v1.2.1 From de960aa9ab4decc3304959f69533eef64d05d8e8 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 26 Jan 2014 10:58:16 +0100 Subject: net: add and use skb_gso_transport_seglen() This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by: Florian Westphal Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/skbuff.h') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 1f689e62e4cb..f589c9af8cbf 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2456,6 +2456,7 @@ void skb_zerocopy(struct sk_buff *to, const struct sk_buff *from, void skb_split(struct sk_buff *skb, struct sk_buff *skb1, const u32 len); int skb_shift(struct sk_buff *tgt, struct sk_buff *skb, int shiftlen); void skb_scrub_packet(struct sk_buff *skb, bool xnet); +unsigned int skb_gso_transport_seglen(const struct sk_buff *skb); struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features); struct skb_checksum_ops { -- cgit v1.2.1