From 415a64aa8dc6b4fc478609c549ca652d95a12f13 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Tue, 18 Jul 2017 16:08:46 -0500 Subject: net/mlx5: QPTS and QPDPM register firmware command support The QPTS register allows changing the priority trust state between pcp and dscp. Add support to get/set trust state from device. When the port is in pcp/dscp trust state, packet is routed by hardware to matching priority based on its pcp/dscp value respectively. The QPDPM register allow channing the dscp to priority mapping. Add support to get/set dscp to priority mapping from device. Note that to change a dscp mapping, the "e" bit of this dscp structure must be set in the QPDPM firmware command. Signed-off-by: Huy Nguyen Reviewed-by: Parav Pandit Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- include/linux/mlx5/port.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/mlx5/port.h') diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h index c59af8ab753a..035f0d4dc9fe 100644 --- a/include/linux/mlx5/port.h +++ b/include/linux/mlx5/port.h @@ -179,4 +179,9 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, int mlx5_query_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *out); int mlx5_set_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *in); + +int mlx5_set_trust_state(struct mlx5_core_dev *mdev, u8 trust_state); +int mlx5_query_trust_state(struct mlx5_core_dev *mdev, u8 *trust_state); +int mlx5_set_dscp2prio(struct mlx5_core_dev *mdev, u8 dscp, u8 prio); +int mlx5_query_dscp2prio(struct mlx5_core_dev *mdev, u8 *dscp2prio); #endif /* __MLX5_PORT_H__ */ -- cgit v1.2.3