From 231147ee77f39f4134935686e9d7e415bdf48149 Mon Sep 17 00:00:00 2001 From: sayli karnik Date: Wed, 28 Sep 2016 21:46:51 +0530 Subject: iio: maxim_thermocouple: Align 16 bit big endian value of raw reads Driver was reporting invalid raw read values for MAX6675 on big endian architectures. MAX6675 buffered mode is not affected, nor is the MAX31855. The driver was losing a 2 byte read value when it used a 32 bit integer buffer to store a 16 bit big endian value. Use big endian types to properly align buffers on big endian architectures. Fixes following sparse endianness warnings: warning: cast to restricted __be16 warning: cast to restricted __be32 Fixes checkpatch issue: CHECK: No space is necessary after a cast Signed-off-by: sayli karnik Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/maxim_thermocouple.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index 39dd2026ccc9..066161a4bccd 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -123,22 +123,24 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, { unsigned int storage_bytes = data->chip->read_size; unsigned int shift = chan->scan_type.shift + (chan->address * 8); - unsigned int buf; + __be16 buf16; + __be32 buf32; int ret; - ret = spi_read(data->spi, (void *) &buf, storage_bytes); - if (ret) - return ret; - switch (storage_bytes) { case 2: - *val = be16_to_cpu(buf); + ret = spi_read(data->spi, (void *)&buf16, storage_bytes); + *val = be16_to_cpu(buf16); break; case 4: - *val = be32_to_cpu(buf); + ret = spi_read(data->spi, (void *)&buf32, storage_bytes); + *val = be32_to_cpu(buf32); break; } + if (ret) + return ret; + /* check to be sure this is a valid reading */ if (*val & data->chip->status_bit) return -EINVAL; -- cgit v1.2.1