From 10c642d0772ac1391ae4f9fdeb13217ab019117a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 29 Dec 2013 19:22:56 +0100 Subject: USB: serial: remove redundant OOM messages Remove redundant error messages on allocation failures, which have already been logged. Cc: Joe Perches Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ch341.c | 4 +-- drivers/usb/serial/console.c | 2 -- drivers/usb/serial/cp210x.c | 8 ++--- drivers/usb/serial/ftdi_sio.c | 5 +--- drivers/usb/serial/garmin_gps.c | 15 ++++------ drivers/usb/serial/io_edgeport.c | 48 ++++++++---------------------- drivers/usb/serial/io_ti.c | 56 ++++++++++------------------------- drivers/usb/serial/ir-usb.c | 9 ++---- drivers/usb/serial/keyspan.c | 8 ++--- drivers/usb/serial/kl5kusb105.c | 16 ++++------ drivers/usb/serial/mos7720.c | 26 +++++----------- drivers/usb/serial/mos7840.c | 18 ++--------- drivers/usb/serial/opticon.c | 4 --- drivers/usb/serial/oti6858.c | 13 +++----- drivers/usb/serial/pl2303.c | 1 - drivers/usb/serial/quatech2.c | 8 ++--- drivers/usb/serial/sierra.c | 10 +------ drivers/usb/serial/ti_usb_3410_5052.c | 18 ++++------- drivers/usb/serial/usb_wwan.c | 6 +--- drivers/usb/serial/visor.c | 10 ++----- drivers/usb/serial/whiteheat.c | 6 +--- 21 files changed, 74 insertions(+), 217 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index c2a4171ab9cb..8908760cca9f 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -384,10 +384,8 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) uint8_t *break_reg; break_reg = kmalloc(2, GFP_KERNEL); - if (!break_reg) { - dev_err(&port->dev, "%s - kmalloc failed\n", __func__); + if (!break_reg) return; - } r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, ch341_break_reg, 0, break_reg, 2); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index c69bb50d4663..b5b8dcbb33a2 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -135,7 +135,6 @@ static int usb_console_setup(struct console *co, char *options) tty = kzalloc(sizeof(*tty), GFP_KERNEL); if (!tty) { retval = -ENOMEM; - dev_err(&port->dev, "no more memory\n"); goto reset_open_count; } kref_init(&tty->kref); @@ -144,7 +143,6 @@ static int usb_console_setup(struct console *co, char *options) tty->index = co->index; if (tty_init_termios(tty)) { retval = -ENOMEM; - dev_err(&port->dev, "no more memory\n"); goto free_tty; } } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 6987b535aa98..95fa1217afdd 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -305,10 +305,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, length = (((size - 1) | 3) + 1) / 4; buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); - if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __func__); + if (!buf) return -ENOMEM; - } /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -352,10 +350,8 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, length = (((size - 1) | 3) + 1) / 4; buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); - if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __func__); + if (!buf) return -ENOMEM; - } /* Array of integers into bytes */ for (i = 0; i < length; i++) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b3f712f8cf17..a4bebacc5cae 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1695,11 +1695,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); - if (!priv) { - dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, - sizeof(struct ftdi_private)); + if (!priv) return -ENOMEM; - } mutex_init(&priv->cfg_lock); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 04b5ed90ffb2..f4ee74da44e8 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -279,10 +279,9 @@ static int pkt_add(struct garmin_data *garmin_data_p, if (data_length) { pkt = kmalloc(sizeof(struct garmin_packet)+data_length, GFP_ATOMIC); - if (pkt == NULL) { - dev_err(&garmin_data_p->port->dev, "out of memory\n"); + if (!pkt) return 0; - } + pkt->size = data_length; memcpy(pkt->data, data, data_length); @@ -1006,14 +1005,11 @@ static int garmin_write_bulk(struct usb_serial_port *port, spin_unlock_irqrestore(&garmin_data_p->lock, flags); buffer = kmalloc(count, GFP_ATOMIC); - if (!buffer) { - dev_err(&port->dev, "out of memory\n"); + if (!buffer) return -ENOMEM; - } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - dev_err(&port->dev, "no more free urbs\n"); kfree(buffer); return -ENOMEM; } @@ -1393,10 +1389,9 @@ static int garmin_port_probe(struct usb_serial_port *port) struct garmin_data *garmin_data_p; garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); - if (garmin_data_p == NULL) { - dev_err(&port->dev, "%s - Out of memory\n", __func__); + if (!garmin_data_p) return -ENOMEM; - } + init_timer(&garmin_data_p->timer); spin_lock_init(&garmin_data_p->lock); INIT_LIST_HEAD(&garmin_data_p->pktlist); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 9c79fb22f341..0dd8cce9c9d3 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -898,7 +898,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); if (!edge_port->txfifo.fifo) { - dev_dbg(dev, "%s - no memory\n", __func__); edge_close(port); return -ENOMEM; } @@ -908,7 +907,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) edge_port->write_in_progress = false; if (!edge_port->write_urb) { - dev_dbg(dev, "%s - no memory\n", __func__); edge_close(port); return -ENOMEM; } @@ -1245,9 +1243,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, to send out */ count = fifo->count; buffer = kmalloc(count+2, GFP_ATOMIC); - if (buffer == NULL) { - dev_err_console(edge_port->port, - "%s - no more kernel memory...\n", __func__); + if (!buffer) { edge_port->write_in_progress = false; goto exit_send; } @@ -2025,11 +2021,8 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); transfer_buffer = kmalloc(64, GFP_KERNEL); - if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", - __func__, 64); + if (!transfer_buffer) return -ENOMEM; - } /* need to split these writes up into 64 byte chunks */ result = 0; @@ -2073,11 +2066,8 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, unsigned char *transfer_buffer; transfer_buffer = kmalloc(64, GFP_KERNEL); - if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", - __func__, 64); + if (!transfer_buffer) return -ENOMEM; - } /* need to split these writes up into 64 byte chunks */ result = 0; @@ -2119,11 +2109,8 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr, unsigned char *transfer_buffer; transfer_buffer = kmalloc(64, GFP_KERNEL); - if (!transfer_buffer) { - dev_err(&serial->dev->dev, - "%s - kmalloc(%d) failed.\n", __func__, 64); + if (!transfer_buffer) return -ENOMEM; - } /* need to split these reads up into 64 byte chunks */ result = 0; @@ -2163,11 +2150,8 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port, int status = 0; buffer = kmalloc(10, GFP_ATOMIC); - if (!buffer) { - dev_err(&edge_port->port->dev, - "%s - kmalloc(%d) failed.\n", __func__, 10); + if (!buffer) return -ENOMEM; - } currentCommand = buffer; @@ -2274,10 +2258,9 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, /* Alloc memory for the string of commands. */ cmdBuffer = kmalloc(0x100, GFP_ATOMIC); - if (!cmdBuffer) { - dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); + if (!cmdBuffer) return -ENOMEM; - } + currCmd = cmdBuffer; /* Enable access to divisor latch */ @@ -2783,10 +2766,9 @@ static int edge_startup(struct usb_serial *serial) /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); - if (edge_serial == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + if (!edge_serial) return -ENOMEM; - } + spin_lock_init(&edge_serial->es_lock); edge_serial->serial = serial; usb_set_serial_data(serial, edge_serial); @@ -2875,14 +2857,12 @@ static int edge_startup(struct usb_serial *serial) /* not set up yet, so do it now */ edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!edge_serial->interrupt_read_urb) { - dev_err(ddev, "out of memory\n"); + if (!edge_serial->interrupt_read_urb) return -ENOMEM; - } + edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { - dev_err(ddev, "out of memory\n"); usb_free_urb(edge_serial->interrupt_read_urb); return -ENOMEM; } @@ -2912,14 +2892,12 @@ static int edge_startup(struct usb_serial *serial) /* not set up yet, so do it now */ edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!edge_serial->read_urb) { - dev_err(ddev, "out of memory\n"); + if (!edge_serial->read_urb) return -ENOMEM; - } + edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->bulk_in_buffer) { - dev_err(&dev->dev, "out of memory\n"); usb_free_urb(edge_serial->read_urb); return -ENOMEM; } diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 2b3b7bfeb332..a673f4b25b08 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -364,11 +364,9 @@ static int write_boot_mem(struct edgeport_serial *serial, /* Must do a read before write */ if (!serial->TiReadI2C) { temp = kmalloc(1, GFP_KERNEL); - if (!temp) { - dev_err(&serial->serial->dev->dev, - "%s - out of memory\n", __func__); + if (!temp) return -ENOMEM; - } + status = read_boot_mem(serial, 0, 1, temp); kfree(temp); if (status) @@ -471,10 +469,8 @@ static int tx_active(struct edgeport_port *port) int bytes_left = 0; oedb = kmalloc(sizeof(*oedb), GFP_KERNEL); - if (!oedb) { - dev_err(&port->port->dev, "%s - out of memory\n", __func__); + if (!oedb) return -ENOMEM; - } lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte, as not all platforms can do DMA @@ -625,14 +621,11 @@ static int check_i2c_image(struct edgeport_serial *serial) __u16 ttype; rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); - if (!rom_desc) { - dev_err(dev, "%s - out of memory\n", __func__); + if (!rom_desc) return -ENOMEM; - } + buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL); if (!buffer) { - dev_err(dev, "%s - out of memory when allocating buffer\n", - __func__); kfree(rom_desc); return -ENOMEM; } @@ -706,10 +699,9 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) struct device *dev = &serial->serial->dev->dev; rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); - if (!rom_desc) { - dev_err(dev, "%s - out of memory\n", __func__); + if (!rom_desc) return -ENOMEM; - } + start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION, rom_desc); @@ -769,10 +761,8 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) sizeof(struct ti_i2c_firmware_rec)); buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(dev, "%s - out of memory\n", __func__); + if (!buffer) return -ENOMEM; - } // Set entire image of 0xffs memset(buffer, 0xff, buffer_size); @@ -832,10 +822,8 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) u8 *data; data = kmalloc(1, GFP_KERNEL); - if (!data) { - dev_err(dev, "%s - out of memory\n", __func__); + if (!data) return -ENOMEM; - } /* Try to read type 2 */ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, @@ -986,10 +974,9 @@ static int download_fw(struct edgeport_serial *serial) * Read Manufacturing Descriptor from TI Based Edgeport */ ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); - if (!ti_manuf_desc) { - dev_err(dev, "%s - out of memory.\n", __func__); + if (!ti_manuf_desc) return -ENOMEM; - } + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); if (status) { kfree(ti_manuf_desc); @@ -1006,7 +993,6 @@ static int download_fw(struct edgeport_serial *serial) rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err(dev, "%s - out of memory.\n", __func__); kfree(ti_manuf_desc); return -ENOMEM; } @@ -1023,7 +1009,6 @@ static int download_fw(struct edgeport_serial *serial) firmware_version = kmalloc(sizeof(*firmware_version), GFP_KERNEL); if (!firmware_version) { - dev_err(dev, "%s - out of memory.\n", __func__); kfree(rom_desc); kfree(ti_manuf_desc); return -ENOMEM; @@ -1068,8 +1053,6 @@ static int download_fw(struct edgeport_serial *serial) record = kmalloc(1, GFP_KERNEL); if (!record) { - dev_err(dev, "%s - out of memory.\n", - __func__); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1153,7 +1136,6 @@ static int download_fw(struct edgeport_serial *serial) header = kmalloc(HEADER_SIZE, GFP_KERNEL); if (!header) { - dev_err(dev, "%s - out of memory.\n", __func__); kfree(rom_desc); kfree(ti_manuf_desc); return -ENOMEM; @@ -1161,7 +1143,6 @@ static int download_fw(struct edgeport_serial *serial) vheader = kmalloc(HEADER_SIZE, GFP_KERNEL); if (!vheader) { - dev_err(dev, "%s - out of memory.\n", __func__); kfree(header); kfree(rom_desc); kfree(ti_manuf_desc); @@ -1290,10 +1271,9 @@ static int download_fw(struct edgeport_serial *serial) * Read Manufacturing Descriptor from TI Based Edgeport */ ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); - if (!ti_manuf_desc) { - dev_err(dev, "%s - out of memory.\n", __func__); + if (!ti_manuf_desc) return -ENOMEM; - } + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); if (status) { kfree(ti_manuf_desc); @@ -1328,10 +1308,8 @@ static int download_fw(struct edgeport_serial *serial) buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header)); buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(dev, "%s - out of memory\n", __func__); + if (!buffer) return -ENOMEM; - } /* Initialize the buffer to 0xff (pad the buffer) */ memset(buffer, 0xff, buffer_size); @@ -2122,7 +2100,6 @@ static void change_port_settings(struct tty_struct *tty, config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { tty->termios = *old_termios; - dev_err(dev, "%s - out of memory\n", __func__); return; } @@ -2393,10 +2370,9 @@ static int edge_startup(struct usb_serial *serial) /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); - if (edge_serial == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + if (!edge_serial) return -ENOMEM; - } + mutex_init(&edge_serial->es_lock); edge_serial->serial = serial; usb_set_serial_data(serial, edge_serial); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 716930ab1bb1..73956d48a0c5 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -377,15 +377,12 @@ static void ir_set_termios(struct tty_struct *tty, * send the baud change out on an "empty" data packet */ urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&port->dev, "%s - no more urbs\n", __func__); + if (!urb) return; - } + transfer_buffer = kmalloc(1, GFP_KERNEL); - if (!transfer_buffer) { - dev_err(&port->dev, "%s - out of memory\n", __func__); + if (!transfer_buffer) goto err_buf; - } *transfer_buffer = ir_xbof | ir_baud; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index d6960aebe246..6125fce7d0f6 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1226,10 +1226,8 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ - if (urb == NULL) { - dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint); + if (!urb) return NULL; - } if (endpoint == 0) { /* control EP filled in when used */ @@ -2312,10 +2310,8 @@ static int keyspan_startup(struct usb_serial *serial) /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); - if (!s_priv) { - dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__); + if (!s_priv) return -ENOMEM; - } s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL); if (!s_priv->instat_buf) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 1b4054fe52a5..4f441c2c0668 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -182,11 +182,9 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, dev_info(&port->serial->dev->dev, "sending SIO Poll request\n"); status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); - if (!status_buf) { - dev_err(&port->dev, "%s - out of memory for status buffer.\n", - __func__); + if (!status_buf) return -ENOMEM; - } + status_buf[0] = 0xff; status_buf[1] = 0xff; rc = usb_control_msg(port->serial->dev, @@ -273,11 +271,9 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) * priv->line_state. */ cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); - if (!cfg) { - dev_err(&port->dev, "%s - out of memory for config buffer.\n", - __func__); + if (!cfg) return -ENOMEM; - } + cfg->pktlen = 5; cfg->baudrate = kl5kusb105a_sio_b9600; cfg->databits = kl5kusb105a_dtb_8; @@ -417,10 +413,8 @@ static void klsi_105_set_termios(struct tty_struct *tty, speed_t baud; cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); - if (!cfg) { - dev_err(dev, "%s - out of memory for config buffer.\n", __func__); + if (!cfg) return; - } /* lock while we are modifying the settings */ spin_lock_irqsave(&priv->lock, flags); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index b739a1732b76..ee68191e87c6 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -362,15 +362,13 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, /* create and initialize the control urb and containing urbtracker */ urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC); - if (urbtrack == NULL) { - dev_err(&usbdev->dev, "out of memory"); + if (!urbtrack) return -ENOMEM; - } + kref_get(&mos_parport->ref_count); urbtrack->mos_parport = mos_parport; urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC); - if (urbtrack->urb == NULL) { - dev_err(&usbdev->dev, "out of urbs"); + if (!urbtrack->urb) { kfree(urbtrack); return -ENOMEM; } @@ -702,10 +700,9 @@ static int mos7715_parport_init(struct usb_serial *serial) /* allocate and initialize parallel port control struct */ mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL); - if (mos_parport == NULL) { - dev_dbg(&serial->dev->dev, "%s: kzalloc failed\n", __func__); + if (!mos_parport) return -ENOMEM; - } + mos_parport->msg_pending = false; kref_init(&mos_parport->ref_count); spin_lock_init(&mos_parport->listlock); @@ -1018,18 +1015,12 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) for (j = 0; j < NUM_URBS; ++j) { urb = usb_alloc_urb(0, GFP_KERNEL); mos7720_port->write_urb_pool[j] = urb; - - if (urb == NULL) { - dev_err(&port->dev, "No more urbs???\n"); + if (!urb) continue; - } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - dev_err(&port->dev, - "%s-out of memory for urb buffers.\n", - __func__); usb_free_urb(mos7720_port->write_urb_pool[j]); mos7720_port->write_urb_pool[j] = NULL; continue; @@ -1250,11 +1241,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - if (urb->transfer_buffer == NULL) { - dev_err_console(port, "%s no more kernel memory...\n", - __func__); + if (!urb->transfer_buffer) goto exit; - } } transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index bc176ae61743..2496e71e406a 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -876,20 +876,14 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) for (j = 0; j < NUM_URBS; ++j) { urb = usb_alloc_urb(0, GFP_KERNEL); mos7840_port->write_urb_pool[j] = urb; - - if (urb == NULL) { - dev_err(&port->dev, "No more urbs???\n"); + if (!urb) continue; - } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { usb_free_urb(urb); mos7840_port->write_urb_pool[j] = NULL; - dev_err(&port->dev, - "%s-out of memory for urb buffers.\n", - __func__); continue; } } @@ -1381,12 +1375,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - - if (urb->transfer_buffer == NULL) { - dev_err_console(port, "%s no more kernel memory...\n", - __func__); + if (!urb->transfer_buffer) goto exit; - } } transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); @@ -2206,10 +2196,8 @@ static int mos7840_port_probe(struct usb_serial_port *port) dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); - if (mos7840_port == NULL) { - dev_err(&port->dev, "%s - Out of memory\n", __func__); + if (!mos7840_port) return -ENOMEM; - } /* Initialize all port interrupt end point to port 0 int * endpoint. Our device has only one interrupt end point diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 1b4f1d2479c1..90c77b20c883 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -200,15 +200,12 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, buffer = kmalloc(count, GFP_ATOMIC); if (!buffer) { - dev_err(&port->dev, "out of memory\n"); count = -ENOMEM; - goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - dev_err(&port->dev, "no more free urbs\n"); count = -ENOMEM; goto error_no_urb; } @@ -221,7 +218,6 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, * to transmit data to de barcode device the control endpoint is used */ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); if (!dr) { - dev_err(&port->dev, "out of memory\n"); count = -ENOMEM; goto error_no_dr; } diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a2080ac7b7e5..1dea599bb71b 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -200,8 +200,7 @@ static void setup_line(struct work_struct *work) int result; new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); - if (new_setup == NULL) { - dev_err(&port->dev, "%s(): out of memory!\n", __func__); + if (!new_setup) { /* we will try again */ schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); @@ -287,11 +286,9 @@ static void send_data(struct work_struct *work) if (count != 0) { allow = kmalloc(1, GFP_KERNEL); - if (!allow) { - dev_err_console(port, "%s(): kmalloc failed\n", - __func__); + if (!allow) return; - } + result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), OTI6858_REQ_T_CHECK_TXBUFF, @@ -517,10 +514,8 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(serial->dev, port->read_urb->pipe); buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); - if (buf == NULL) { - dev_err(&port->dev, "%s(): out of memory!\n", __func__); + if (!buf) return -ENOMEM; - } result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), OTI6858_REQ_T_GET_STATUS, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9a7dfa3738d9..3dd5398174c1 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -346,7 +346,6 @@ static void pl2303_set_termios(struct tty_struct *tty, buf = kzalloc(7, GFP_KERNEL); if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ if (old_termios) tty->termios = *old_termios; diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index a24d59ae4032..cb51dd757b56 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -676,10 +676,8 @@ static int qt2_setup_urbs(struct usb_serial *serial) serial_priv = usb_get_serial_data(serial); serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!serial_priv->read_urb) { - dev_err(&serial->dev->dev, "No free urbs available\n"); + if (!serial_priv->read_urb) return -ENOMEM; - } usb_fill_bulk_urb(serial_priv->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, @@ -715,10 +713,8 @@ static int qt2_attach(struct usb_serial *serial) } serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); - if (!serial_priv) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + if (!serial_priv) return -ENOMEM; - } serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL); if (!serial_priv->read_buffer) { diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index de958c5b52e3..a9eb6221a815 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -497,14 +497,12 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, buffer = kmalloc(writesize, GFP_ATOMIC); if (!buffer) { - dev_err(&port->dev, "out of memory\n"); retval = -ENOMEM; goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { - dev_err(&port->dev, "no more free urbs\n"); retval = -ENOMEM; goto error_no_urb; } @@ -736,11 +734,8 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, return NULL; urb = usb_alloc_urb(0, mem_flags); - if (urb == NULL) { - dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n", - __func__, endpoint); + if (!urb) return NULL; - } buf = kmalloc(len, mem_flags); if (buf) { @@ -752,9 +747,6 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, dir == USB_DIR_IN ? 'i' : 'o', urb, buf); } else { - dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__, - dir == USB_DIR_IN ? 'i' : 'o', urb, buf); - sierra_release_urb(urb); urb = NULL; } diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 4a649edaa2c0..698dc14b7d0d 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -301,10 +301,9 @@ static int ti_startup(struct usb_serial *serial) /* create device structure */ tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); - if (tdev == NULL) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); + if (!tdev) return -ENOMEM; - } + mutex_init(&tdev->td_open_close_lock); tdev->td_serial = serial; usb_set_serial_data(serial, tdev); @@ -722,10 +721,8 @@ static void ti_set_termios(struct tty_struct *tty, return; config = kmalloc(sizeof(*config), GFP_KERNEL); - if (!config) { - dev_err(&port->dev, "%s - out of memory\n", __func__); + if (!config) return; - } config->wFlags = 0; @@ -1194,10 +1191,8 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr) size = sizeof(struct ti_port_status); data = kmalloc(size, GFP_KERNEL); - if (!data) { - dev_err(&port->dev, "%s - out of memory\n", __func__); + if (!data) return -ENOMEM; - } status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); @@ -1397,10 +1392,8 @@ static int ti_write_byte(struct usb_serial_port *port, size = sizeof(struct ti_write_data_bytes) + 2; data = kmalloc(size, GFP_KERNEL); - if (!data) { - dev_err(&port->dev, "%s - out of memory\n", __func__); + if (!data) return -ENOMEM; - } data->bAddrType = TI_RW_DATA_ADDR_XDATA; data->bDataType = TI_RW_DATA_BYTE; @@ -1516,7 +1509,6 @@ static int ti_download_firmware(struct ti_device *tdev) status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } else { - dev_dbg(&dev->dev, "%s ENOMEM\n", __func__); status = -ENOMEM; } release_firmware(fw_p); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 85365784040b..640fe0173236 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -447,12 +447,8 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, struct urb *urb; urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ - if (urb == NULL) { - dev_dbg(&serial->interface->dev, - "%s: alloc for endpoint %d failed.\n", __func__, - endpoint); + if (!urb) return NULL; - } /* Fill URB using supplied data. */ usb_fill_bulk_urb(urb, serial->dev, diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index ae016439e2cd..d93878541ee7 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -324,11 +324,8 @@ static int palm_os_3_probe(struct usb_serial *serial, int num_ports = 0; transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); - if (!transfer_buffer) { - dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, - sizeof(*connection_info)); + if (!transfer_buffer) return -ENOMEM; - } /* send a get connection info request */ retval = usb_control_msg(serial->dev, @@ -419,11 +416,8 @@ static int palm_os_4_probe(struct usb_serial *serial, int retval; transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); - if (!transfer_buffer) { - dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, - sizeof(*connection_info)); + if (!transfer_buffer) return -ENOMEM; - } retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index d23290e496ef..1d9d7008ad19 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -288,12 +288,8 @@ static int whiteheat_attach(struct usb_serial *serial) command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); - if (command_info == NULL) { - dev_err(&serial->dev->dev, - "%s: Out of memory for port structures\n", - serial->type->description); + if (!command_info) goto no_command_private; - } mutex_init(&command_info->mutex); command_info->port_running = 0; -- cgit v1.2.1