From b0310c2f09bbe8aebefb97ed67949a3a7092aca6 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 29 May 2019 13:28:40 +0300 Subject: USB: use genalloc for USB HCs with local memory For HCs that have local memory, replace the current DMA API usage with a genalloc generic allocator to manage the mappings for these devices. To help users, introduce a new HCD API, usb_hcd_setup_local_mem() that will setup up the genalloc backing up the device local memory. It will be used in subsequent patches. This is in preparation for dropping the existing "coherent" dma mem declaration APIs. The current implementation was relying on a short circuit in the DMA API that in the end, was acting as an allocator for these type of devices. Signed-off-by: Laurentiu Tudor Tested-by: Fredrik Noring Reviewed-by: Greg Kroah-Hartman Signed-off-by: Christoph Hellwig --- drivers/usb/core/buffer.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/usb/core/buffer.c') diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index f641342cdec0..d2064ad7ad14 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -124,6 +125,9 @@ void *hcd_buffer_alloc( if (size == 0) return NULL; + if (hcd->localmem_pool) + return gen_pool_dma_alloc(hcd->localmem_pool, size, dma); + /* some USB hosts just use PIO */ if (!IS_ENABLED(CONFIG_HAS_DMA) || (!is_device_dma_capable(bus->sysdev) && @@ -152,6 +156,11 @@ void hcd_buffer_free( if (!addr) return; + if (hcd->localmem_pool) { + gen_pool_free(hcd->localmem_pool, (unsigned long)addr, size); + return; + } + if (!IS_ENABLED(CONFIG_HAS_DMA) || (!is_device_dma_capable(bus->sysdev) && !(hcd->driver->flags & HCD_LOCAL_MEM))) { -- cgit v1.2.3 From 2d7a3dc3e24f43504b1f25eae8195e600f4cce8b Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 29 May 2019 13:28:43 +0300 Subject: USB: drop HCD_LOCAL_MEM flag With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor Tested-by: Fredrik Noring Reviewed-by: Greg Kroah-Hartman Signed-off-by: Christoph Hellwig --- drivers/usb/core/buffer.c | 8 +++----- drivers/usb/core/hcd.c | 15 ++++++--------- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/fotg210-hcd.c | 2 +- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-sm501.c | 5 +++-- drivers/usb/host/ohci-tmio.c | 2 +- drivers/usb/host/uhci-hcd.c | 2 +- include/linux/usb/hcd.h | 1 - 9 files changed, 17 insertions(+), 22 deletions(-) (limited to 'drivers/usb/core/buffer.c') diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index d2064ad7ad14..1359b78a624e 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -68,7 +68,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) if (!IS_ENABLED(CONFIG_HAS_DMA) || (!is_device_dma_capable(hcd->self.sysdev) && - !(hcd->driver->flags & HCD_LOCAL_MEM))) + !hcd->localmem_pool)) return 0; for (i = 0; i < HCD_BUFFER_POOLS; i++) { @@ -130,8 +130,7 @@ void *hcd_buffer_alloc( /* some USB hosts just use PIO */ if (!IS_ENABLED(CONFIG_HAS_DMA) || - (!is_device_dma_capable(bus->sysdev) && - !(hcd->driver->flags & HCD_LOCAL_MEM))) { + !is_device_dma_capable(bus->sysdev)) { *dma = ~(dma_addr_t) 0; return kmalloc(size, mem_flags); } @@ -162,8 +161,7 @@ void hcd_buffer_free( } if (!IS_ENABLED(CONFIG_HAS_DMA) || - (!is_device_dma_capable(bus->sysdev) && - !(hcd->driver->flags & HCD_LOCAL_MEM))) { + !is_device_dma_capable(bus->sysdev)) { kfree(addr); return; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 29b96e5e8621..fe631d18c1ed 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1347,14 +1347,14 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); * using regular system memory - like pci devices doing bus mastering. * * To support host controllers with limited dma capabilities we provide dma - * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag. + * bounce buffers. This feature can be enabled by initializing + * hcd->localmem_pool using usb_hcd_setup_local_mem(). * For this to work properly the host controller code must first use the * function dma_declare_coherent_memory() to point out which memory area * that should be used for dma allocations. * - * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for - * dma using dma_alloc_coherent() which in turn allocates from the memory - * area pointed out with dma_declare_coherent_memory(). + * The initialized hcd->localmem_pool then tells the usb code to allocate all + * data for dma using the genalloc API. * * So, to summarize... * @@ -1364,9 +1364,6 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); * (a) "normal" kernel memory is no good, and * (b) there's not enough to share * - * - The only *portable* hook for such stuff in the - * DMA framework is dma_declare_coherent_memory() - * * - So we use that, even though the primary requirement * is that the memory be "local" (hence addressable * by that device), not "coherent". @@ -1533,7 +1530,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, urb->setup_dma)) return -EAGAIN; urb->transfer_flags |= URB_SETUP_MAP_SINGLE; - } else if (hcd->driver->flags & HCD_LOCAL_MEM) { + } else if (hcd->localmem_pool) { ret = hcd_alloc_coherent( urb->dev->bus, mem_flags, &urb->setup_dma, @@ -1603,7 +1600,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, else urb->transfer_flags |= URB_DMA_MAP_SINGLE; } - } else if (hcd->driver->flags & HCD_LOCAL_MEM) { + } else if (hcd->localmem_pool) { ret = hcd_alloc_coherent( urb->dev->bus, mem_flags, &urb->transfer_dma, diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index cdafa97f632d..9da7e22848c9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -559,7 +559,7 @@ static int ehci_init(struct usb_hcd *hcd) ehci->command = temp; /* Accept arbitrarily long scatter-gather lists */ - if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + if (!hcd->localmem_pool) hcd->self.sg_tablesize = ~0; /* Prepare for unlinking active QHs */ diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 0da68df259c8..5d74ff61fa4c 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -4995,7 +4995,7 @@ static int hcd_fotg210_init(struct usb_hcd *hcd) fotg210->command = temp; /* Accept arbitrarily long scatter-gather lists */ - if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + if (!hcd->localmem_pool) hcd->self.sg_tablesize = ~0; return 0; } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b200b19b44fa..5801858d867e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -448,7 +448,7 @@ static int ohci_init (struct ohci_hcd *ohci) struct usb_hcd *hcd = ohci_to_hcd(ohci); /* Accept arbitrarily long scatter-gather lists */ - if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + if (!hcd->localmem_pool) hcd->self.sg_tablesize = ~0; if (distrust_firmware) diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index b710e100aec9..c158cda9e4b9 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -49,7 +49,7 @@ static const struct hc_driver ohci_sm501_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM, + .flags = HCD_USB11 | HCD_MEMORY, /* * basic lifecycle operations @@ -153,7 +153,8 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) * fine. This is however not always the case - buffers may be allocated * using kmalloc() - so the usb core needs to be told that it must copy * data into our local memory if the buffers happen to be placed in - * regular memory. The HCD_LOCAL_MEM flag does just that. + * regular memory. A non-null hcd->localmem_pool initialized by the + * the call to usb_hcd_setup_local_mem() below does just that. */ if (usb_hcd_setup_local_mem(hcd, mem->start, diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index 3b84ce0c3f29..d5a293a707b6 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -153,7 +153,7 @@ static const struct hc_driver ohci_tmio_hc_driver = { /* generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM, + .flags = HCD_USB11 | HCD_MEMORY, /* basic lifecycle operations */ .start = ohci_tmio_start, diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 98deb5f64268..03bc59755123 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -581,7 +581,7 @@ static int uhci_start(struct usb_hcd *hcd) hcd->uses_new_polling = 1; /* Accept arbitrarily long scatter-gather lists */ - if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + if (!hcd->localmem_pool) hcd->self.sg_tablesize = ~0; spin_lock_init(&uhci->lock); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 127560a4bfa0..bab27ccc8ff5 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -256,7 +256,6 @@ struct hc_driver { int flags; #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ -#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */ #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ #define HCD_USB11 0x0010 /* USB 1.1 */ #define HCD_USB2 0x0020 /* USB 2.0 */ -- cgit v1.2.3