From aae7df50190a640e51bfe11c93f94741ac82ff0b Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Sep 2014 19:20:05 -0400 Subject: block: Integrity checksum flag Make the choice of checksum a per-I/O property by introducing a flag that can be inspected by the SCSI layer. There are several reasons for this: 1. It allows us to switch choice of checksum without unloading and reloading the HBA driver. 2. During error recovery we need to be able to tell the HBA that checksums read from disk should not be verified and converted to IP checksums. 3. For error injection purposes we need to be able to write a bad guard tag to storage. Since the storage device only supports T10 CRC we need to be able to disable IP checksum conversion on the HBA. Signed-off-by: Martin K. Petersen Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe --- drivers/scsi/sd_dif.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/sd_dif.c') diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 4ce636fdc15f..2198abee619e 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -255,12 +255,14 @@ void sd_dif_config_host(struct scsi_disk *sdkp) return; /* Enable DMA of protection information */ - if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) + if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) { if (type == SD_DIF_TYPE3_PROTECTION) blk_integrity_register(disk, &dif_type3_integrity_ip); else blk_integrity_register(disk, &dif_type1_integrity_ip); - else + + disk->integrity->flags |= BLK_INTEGRITY_IP_CHECKSUM; + } else if (type == SD_DIF_TYPE3_PROTECTION) blk_integrity_register(disk, &dif_type3_integrity_crc); else -- cgit v1.2.1