From bb9ba31ca3b88fd396e38950d1caedf2f83521c6 Mon Sep 17 00:00:00 2001 From: Joerg Dorchain Date: Tue, 6 Mar 2007 02:46:54 -0800 Subject: [SCSI] gdth: fix oops in gdth_copy_cmd() Recent alterations to the gdth_fill_raw_cmd() path no longer set the sg_ranz field for zero transfer commands. However, this field is used lower down in the function to initialise ha->cmd_len to the size of the firmware packet. If this uninitialised field contains a bogus value, ha->cmd_len can become much larger than the actual firmware packet and end up oopsing in gdth_copy_cmd() as it tries to copy this huge packet to the device (usually because it runs into an unallocated page). The fix is to initialise the sg_ranz field to zero at the start of gdth_fill_raw_cmd(). Signed-off-by: Joerg Dorchain Acked-by: "Leubner, Achim" Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/gdth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/scsi/gdth.c') diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 8c81cec85298..60446b88f721 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -3091,6 +3091,7 @@ static int gdth_fill_raw_cmd(int hanum,Scsi_Cmnd *scp,unchar b) cmdp->u.raw64.direction = gdth_direction_tab[scp->cmnd[0]]==DOU ? GDTH_DATA_OUT:GDTH_DATA_IN; memcpy(cmdp->u.raw64.cmd,scp->cmnd,16); + cmdp->u.raw64.sg_ranz = 0; } else { cmdp->u.raw.reserved = 0; cmdp->u.raw.mdisc_time = 0; @@ -3107,6 +3108,7 @@ static int gdth_fill_raw_cmd(int hanum,Scsi_Cmnd *scp,unchar b) cmdp->u.raw.direction = gdth_direction_tab[scp->cmnd[0]]==DOU ? GDTH_DATA_OUT:GDTH_DATA_IN; memcpy(cmdp->u.raw.cmd,scp->cmnd,12); + cmdp->u.raw.sg_ranz = 0; } if (scp->use_sg) { -- cgit v1.2.1