From a6a8d9f87eb8510a8f53672ea87703f62185d75f Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:49:46 -0700 Subject: [SCSI] scsi_dh: add infrastructure for SCSI Device Handlers Some of the storage devices (that can be accessed through multiple paths), do need some special handling for 1. Activating the passive path of the storage access. 2. Decode and handle the special sense codes returned by the devices. 3. Handle the I/Os being sent to the passive path, especially during the device probe time. when accessed through multiple paths. As of today this special device handling is done at the dm-multipath layer using dm-handlers. That works well for (1); for (2) to be handled at dm layer, scsi sense information need to be exported from SCSI to dm-layer, which is not very attractive; (3) cannot be done at all at the dm layer. Device handler has been moved to SCSI mainly to handle (2) and (3) properly. Signed-off-by: Chandra Seetharaman Signed-off-by: Mike Anderson Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/device_handler/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 drivers/scsi/device_handler/Kconfig (limited to 'drivers/scsi/device_handler/Kconfig') diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig new file mode 100644 index 000000000000..228241d1d98c --- /dev/null +++ b/drivers/scsi/device_handler/Kconfig @@ -0,0 +1,12 @@ +# +# SCSI Device Handler configuration +# + +menuconfig SCSI_DH + tristate "SCSI Device Handlers" + depends on SCSI + default n + help + SCSI Device Handlers provide device specific support for + devices utilized in multipath configurations. Say Y here to + select support for specific hardware. -- cgit v1.2.3 From fbd7ab3eb53a3b88fefa7873139a62e439860155 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 1 May 2008 14:49:52 -0700 Subject: [SCSI] scsi_dh: add lsi rdac device handler This patch provides the device handler to support the LSI RDAC SCSI based storage devices. Signed-off-by: Chandra Seetharaman Signed-off-by: James Bottomley --- drivers/scsi/device_handler/Kconfig | 6 + drivers/scsi/device_handler/Makefile | 1 + drivers/scsi/device_handler/scsi_dh_rdac.c | 691 +++++++++++++++++++++++++++++ 3 files changed, 698 insertions(+) create mode 100644 drivers/scsi/device_handler/scsi_dh_rdac.c (limited to 'drivers/scsi/device_handler/Kconfig') diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig index 228241d1d98c..404f37732627 100644 --- a/drivers/scsi/device_handler/Kconfig +++ b/drivers/scsi/device_handler/Kconfig @@ -10,3 +10,9 @@ menuconfig SCSI_DH SCSI Device Handlers provide device specific support for devices utilized in multipath configurations. Say Y here to select support for specific hardware. + +config SCSI_DH_RDAC + tristate "LSI RDAC Device Handler" + depends on SCSI_DH + help + If you have a LSI RDAC select y. Otherwise, say N. diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile index f306e44e3837..1a42b3498318 100644 --- a/drivers/scsi/device_handler/Makefile +++ b/drivers/scsi/device_handler/Makefile @@ -2,3 +2,4 @@ # SCSI Device Handler # obj-$(CONFIG_SCSI_DH) += scsi_dh.o +obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c new file mode 100644 index 000000000000..6fff077a888d --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -0,0 +1,691 @@ +/* + * Engenio/LSI RDAC SCSI Device Handler + * + * Copyright (C) 2005 Mike Christie. All rights reserved. + * Copyright (C) Chandra Seetharaman, IBM Corp. 2007 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ +#include +#include +#include + +#define RDAC_NAME "rdac" + +/* + * LSI mode page stuff + * + * These struct definitions and the forming of the + * mode page were taken from the LSI RDAC 2.4 GPL'd + * driver, and then converted to Linux conventions. + */ +#define RDAC_QUIESCENCE_TIME 20; +/* + * Page Codes + */ +#define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c + +/* + * Controller modes definitions + */ +#define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02 + +/* + * RDAC Options field + */ +#define RDAC_FORCED_QUIESENCE 0x02 + +#define RDAC_TIMEOUT (60 * HZ) +#define RDAC_RETRIES 3 + +struct rdac_mode_6_hdr { + u8 data_len; + u8 medium_type; + u8 device_params; + u8 block_desc_len; +}; + +struct rdac_mode_10_hdr { + u16 data_len; + u8 medium_type; + u8 device_params; + u16 reserved; + u16 block_desc_len; +}; + +struct rdac_mode_common { + u8 controller_serial[16]; + u8 alt_controller_serial[16]; + u8 rdac_mode[2]; + u8 alt_rdac_mode[2]; + u8 quiescence_timeout; + u8 rdac_options; +}; + +struct rdac_pg_legacy { + struct rdac_mode_6_hdr hdr; + u8 page_code; + u8 page_len; + struct rdac_mode_common common; +#define MODE6_MAX_LUN 32 + u8 lun_table[MODE6_MAX_LUN]; + u8 reserved2[32]; + u8 reserved3; + u8 reserved4; +}; + +struct rdac_pg_expanded { + struct rdac_mode_10_hdr hdr; + u8 page_code; + u8 subpage_code; + u8 page_len[2]; + struct rdac_mode_common common; + u8 lun_table[256]; + u8 reserved3; + u8 reserved4; +}; + +struct c9_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC9 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "vace" */ + u8 avte_cvp; + u8 path_prio; + u8 reserved2[38]; +}; + +#define SUBSYS_ID_LEN 16 +#define SLOT_ID_LEN 2 + +struct c4_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC4 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "subs" */ + u8 subsys_id[SUBSYS_ID_LEN]; + u8 revision[4]; + u8 slot_id[SLOT_ID_LEN]; + u8 reserved[2]; +}; + +struct rdac_controller { + u8 subsys_id[SUBSYS_ID_LEN]; + u8 slot_id[SLOT_ID_LEN]; + int use_ms10; + struct kref kref; + struct list_head node; /* list of all controllers */ + union { + struct rdac_pg_legacy legacy; + struct rdac_pg_expanded expanded; + } mode_select; +}; +struct c8_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC8 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "edid" */ + u8 reserved2[3]; + u8 vol_uniq_id_len; + u8 vol_uniq_id[16]; + u8 vol_user_label_len; + u8 vol_user_label[60]; + u8 array_uniq_id_len; + u8 array_unique_id[16]; + u8 array_user_label_len; + u8 array_user_label[60]; + u8 lun[8]; +}; + +struct c2_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC2 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "swr4" */ + u8 sw_version[3]; + u8 sw_date[3]; + u8 features_enabled; + u8 max_lun_supported; + u8 partitions[239]; /* Total allocation length should be 0xFF */ +}; + +struct rdac_dh_data { + struct rdac_controller *ctlr; +#define UNINITIALIZED_LUN (1 << 8) + unsigned lun; +#define RDAC_STATE_ACTIVE 0 +#define RDAC_STATE_PASSIVE 1 + unsigned char state; + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + union { + struct c2_inquiry c2; + struct c4_inquiry c4; + struct c8_inquiry c8; + struct c9_inquiry c9; + } inq; +}; + +static LIST_HEAD(ctlr_list); +static DEFINE_SPINLOCK(list_lock); + +static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev) +{ + struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; + BUG_ON(scsi_dh_data == NULL); + return ((struct rdac_dh_data *) scsi_dh_data->buf); +} + +static struct request *get_rdac_req(struct scsi_device *sdev, + void *buffer, unsigned buflen, int rw) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + struct rdac_dh_data *h = get_rdac_data(sdev); + + rq = blk_get_request(q, rw, GFP_KERNEL); + + if (!rq) { + sdev_printk(KERN_INFO, sdev, + "get_rdac_req: blk_get_request failed.\n"); + return NULL; + } + + if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_KERNEL)) { + blk_put_request(rq); + sdev_printk(KERN_INFO, sdev, + "get_rdac_req: blk_rq_map_kern failed.\n"); + return NULL; + } + + memset(&rq->cmd, 0, BLK_MAX_CDB); + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = 0; + + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE; + rq->retries = RDAC_RETRIES; + rq->timeout = RDAC_TIMEOUT; + + return rq; +} + +static struct request *rdac_failover_get(struct scsi_device *sdev) +{ + struct request *rq; + struct rdac_mode_common *common; + unsigned data_size; + struct rdac_dh_data *h = get_rdac_data(sdev); + + if (h->ctlr->use_ms10) { + struct rdac_pg_expanded *rdac_pg; + + data_size = sizeof(struct rdac_pg_expanded); + rdac_pg = &h->ctlr->mode_select.expanded; + memset(rdac_pg, 0, data_size); + common = &rdac_pg->common; + rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; + rdac_pg->subpage_code = 0x1; + rdac_pg->page_len[0] = 0x01; + rdac_pg->page_len[1] = 0x28; + rdac_pg->lun_table[h->lun] = 0x81; + } else { + struct rdac_pg_legacy *rdac_pg; + + data_size = sizeof(struct rdac_pg_legacy); + rdac_pg = &h->ctlr->mode_select.legacy; + memset(rdac_pg, 0, data_size); + common = &rdac_pg->common; + rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; + rdac_pg->page_len = 0x68; + rdac_pg->lun_table[h->lun] = 0x81; + } + common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; + common->quiescence_timeout = RDAC_QUIESCENCE_TIME; + common->rdac_options = RDAC_FORCED_QUIESENCE; + + /* get request for block layer packet command */ + rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE); + if (!rq) + return NULL; + + /* Prepare the command. */ + if (h->ctlr->use_ms10) { + rq->cmd[0] = MODE_SELECT_10; + rq->cmd[7] = data_size >> 8; + rq->cmd[8] = data_size & 0xff; + } else { + rq->cmd[0] = MODE_SELECT; + rq->cmd[4] = data_size; + } + rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); + + return rq; +} + +static void release_controller(struct kref *kref) +{ + struct rdac_controller *ctlr; + ctlr = container_of(kref, struct rdac_controller, kref); + + spin_lock(&list_lock); + list_del(&ctlr->node); + spin_unlock(&list_lock); + kfree(ctlr); +} + +static struct rdac_controller *get_controller(u8 *subsys_id, u8 *slot_id) +{ + struct rdac_controller *ctlr, *tmp; + + spin_lock(&list_lock); + + list_for_each_entry(tmp, &ctlr_list, node) { + if ((memcmp(tmp->subsys_id, subsys_id, SUBSYS_ID_LEN) == 0) && + (memcmp(tmp->slot_id, slot_id, SLOT_ID_LEN) == 0)) { + kref_get(&tmp->kref); + spin_unlock(&list_lock); + return tmp; + } + } + ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); + if (!ctlr) + goto done; + + /* initialize fields of controller */ + memcpy(ctlr->subsys_id, subsys_id, SUBSYS_ID_LEN); + memcpy(ctlr->slot_id, slot_id, SLOT_ID_LEN); + kref_init(&ctlr->kref); + ctlr->use_ms10 = -1; + list_add(&ctlr->node, &ctlr_list); +done: + spin_unlock(&list_lock); + return ctlr; +} + +static int submit_inquiry(struct scsi_device *sdev, int page_code, + unsigned int len) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + struct rdac_dh_data *h = get_rdac_data(sdev); + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = get_rdac_req(sdev, &h->inq, len, READ); + if (!rq) + goto done; + + /* Prepare the command. */ + rq->cmd[0] = INQUIRY; + rq->cmd[1] = 1; + rq->cmd[2] = page_code; + rq->cmd[4] = len; + rq->cmd_len = COMMAND_SIZE(INQUIRY); + err = blk_execute_rq(q, NULL, rq, 1); + if (err == -EIO) + err = SCSI_DH_IO; +done: + return err; +} + +static int get_lun(struct scsi_device *sdev) +{ + int err; + struct c8_inquiry *inqp; + struct rdac_dh_data *h = get_rdac_data(sdev); + + err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry)); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c8; + h->lun = inqp->lun[7]; /* currently it uses only one byte */ + } + return err; +} + +#define RDAC_OWNED 0 +#define RDAC_UNOWNED 1 +#define RDAC_FAILED 2 +static int check_ownership(struct scsi_device *sdev) +{ + int err; + struct c9_inquiry *inqp; + struct rdac_dh_data *h = get_rdac_data(sdev); + + err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry)); + if (err == SCSI_DH_OK) { + err = RDAC_UNOWNED; + inqp = &h->inq.c9; + /* + * If in AVT mode or if the path already owns the LUN, + * return RDAC_OWNED; + */ + if (((inqp->avte_cvp >> 7) == 0x1) || + ((inqp->avte_cvp & 0x1) != 0)) + err = RDAC_OWNED; + } else + err = RDAC_FAILED; + return err; +} + +static int initialize_controller(struct scsi_device *sdev) +{ + int err; + struct c4_inquiry *inqp; + struct rdac_dh_data *h = get_rdac_data(sdev); + + err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry)); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c4; + h->ctlr = get_controller(inqp->subsys_id, inqp->slot_id); + if (!h->ctlr) + err = SCSI_DH_RES_TEMP_UNAVAIL; + } + return err; +} + +static int set_mode_select(struct scsi_device *sdev) +{ + int err; + struct c2_inquiry *inqp; + struct rdac_dh_data *h = get_rdac_data(sdev); + + err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry)); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c2; + /* + * If more than MODE6_MAX_LUN luns are supported, use + * mode select 10 + */ + if (inqp->max_lun_supported >= MODE6_MAX_LUN) + h->ctlr->use_ms10 = 1; + else + h->ctlr->use_ms10 = 0; + } + return err; +} + +static int mode_select_handle_sense(struct scsi_device *sdev) +{ + struct scsi_sense_hdr sense_hdr; + struct rdac_dh_data *h = get_rdac_data(sdev); + int sense, err = SCSI_DH_IO, ret; + + ret = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sense_hdr); + if (!ret) + goto done; + + err = SCSI_DH_OK; + sense = (sense_hdr.sense_key << 16) | (sense_hdr.asc << 8) | + sense_hdr.ascq; + /* If it is retryable failure, submit the c9 inquiry again */ + if (sense == 0x59136 || sense == 0x68b02 || sense == 0xb8b02 || + sense == 0x62900) { + /* 0x59136 - Command lock contention + * 0x[6b]8b02 - Quiesense in progress or achieved + * 0x62900 - Power On, Reset, or Bus Device Reset + */ + err = SCSI_DH_RETRY; + } + + if (sense) + sdev_printk(KERN_INFO, sdev, + "MODE_SELECT failed with sense 0x%x.\n", sense); +done: + return err; +} + +static int send_mode_select(struct scsi_device *sdev) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + struct rdac_dh_data *h = get_rdac_data(sdev); + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = rdac_failover_get(sdev); + if (!rq) + goto done; + + sdev_printk(KERN_INFO, sdev, "queueing MODE_SELECT command.\n"); + + err = blk_execute_rq(q, NULL, rq, 1); + if (err != SCSI_DH_OK) + err = mode_select_handle_sense(sdev); + if (err == SCSI_DH_OK) + h->state = RDAC_STATE_ACTIVE; +done: + return err; +} + +static int rdac_activate(struct scsi_device *sdev) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + int err = SCSI_DH_OK; + + if (h->lun == UNINITIALIZED_LUN) { + err = get_lun(sdev); + if (err != SCSI_DH_OK) + goto done; + } + + err = check_ownership(sdev); + switch (err) { + case RDAC_UNOWNED: + break; + case RDAC_OWNED: + err = SCSI_DH_OK; + goto done; + case RDAC_FAILED: + default: + err = SCSI_DH_IO; + goto done; + } + + if (!h->ctlr) { + err = initialize_controller(sdev); + if (err != SCSI_DH_OK) + goto done; + } + + if (h->ctlr->use_ms10 == -1) { + err = set_mode_select(sdev); + if (err != SCSI_DH_OK) + goto done; + } + + err = send_mode_select(sdev); +done: + return err; +} + +static int rdac_prep_fn(struct scsi_device *sdev, struct request *req) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + int ret = BLKPREP_OK; + + if (h->state != RDAC_STATE_ACTIVE) { + ret = BLKPREP_KILL; + req->cmd_flags |= REQ_QUIET; + } + return ret; + +} + +static int rdac_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81) + /* LUN Not Ready - Storage firmware incompatible + * Manual code synchonisation required. + * + * Nothing we can do here. Try to bypass the path. + */ + return SUCCESS; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1) + /* LUN Not Ready - Quiescense in progress + * + * Just retry and wait. + */ + return NEEDS_RETRY; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { + /* Invalid Request - Current Logical Unit Ownership. + * Controller is not the current owner of the LUN, + * Fail the path, so that the other path be used. + */ + h->state = RDAC_STATE_PASSIVE; + return SUCCESS; + } + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Power On, Reset, or Bus Device Reset, just retry. + */ + return NEEDS_RETRY; + break; + } + /* success just means we do not care what scsi-ml does */ + return SCSI_RETURN_NOT_HANDLED; +} + +static const struct { + char *vendor; + char *model; +} rdac_dev_list[] = { + {"IBM", "1722"}, + {"IBM", "1724"}, + {"IBM", "1726"}, + {"IBM", "1742"}, + {"IBM", "1814"}, + {"IBM", "1815"}, + {"IBM", "1818"}, + {"IBM", "3526"}, + {"SGI", "TP9400"}, + {"SGI", "TP9500"}, + {"SGI", "IS"}, + {"STK", "OPENstorage D280"}, + {"SUN", "CSM200_R"}, + {"SUN", "LCSM100_F"}, + {NULL, NULL}, +}; + +static int rdac_bus_notify(struct notifier_block *, unsigned long, void *); + +static struct scsi_device_handler rdac_dh = { + .name = RDAC_NAME, + .module = THIS_MODULE, + .nb.notifier_call = rdac_bus_notify, + .prep_fn = rdac_prep_fn, + .check_sense = rdac_check_sense, + .activate = rdac_activate, +}; + +/* + * TODO: need some interface so we can set trespass values + */ +static int rdac_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_dh_data *scsi_dh_data; + struct rdac_dh_data *h; + int i, found = 0; + unsigned long flags; + + if (action == BUS_NOTIFY_ADD_DEVICE) { + for (i = 0; rdac_dev_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor, + strlen(rdac_dev_list[i].vendor)) && + !strncmp(sdev->model, rdac_dev_list[i].model, + strlen(rdac_dev_list[i].model))) { + found = 1; + break; + } + } + if (!found) + goto out; + + scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *) + + sizeof(*h) , GFP_KERNEL); + if (!scsi_dh_data) { + sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n", + RDAC_NAME); + goto out; + } + + scsi_dh_data->scsi_dh = &rdac_dh; + h = (struct rdac_dh_data *) scsi_dh_data->buf; + h->lun = UNINITIALIZED_LUN; + h->state = RDAC_STATE_ACTIVE; + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + sdev->scsi_dh_data = scsi_dh_data; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + try_module_get(THIS_MODULE); + + sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", RDAC_NAME); + + } else if (action == BUS_NOTIFY_DEL_DEVICE) { + if (sdev->scsi_dh_data == NULL || + sdev->scsi_dh_data->scsi_dh != &rdac_dh) + goto out; + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + scsi_dh_data = sdev->scsi_dh_data; + sdev->scsi_dh_data = NULL; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + + h = (struct rdac_dh_data *) scsi_dh_data->buf; + if (h->ctlr) + kref_put(&h->ctlr->kref, release_controller); + kfree(scsi_dh_data); + module_put(THIS_MODULE); + sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", RDAC_NAME); + } + +out: + return 0; +} + +static int __init rdac_init(void) +{ + int r; + + r = scsi_register_device_handler(&rdac_dh); + if (r != 0) + printk(KERN_ERR "Failed to register scsi device handler."); + return r; +} + +static void __exit rdac_exit(void) +{ + scsi_unregister_device_handler(&rdac_dh); +} + +module_init(rdac_init); +module_exit(rdac_exit); + +MODULE_DESCRIPTION("Multipath LSI/Engenio RDAC driver"); +MODULE_AUTHOR("Mike Christie, Chandra Seetharaman"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From f6dd337ee4c440f29a873da3779eb3af44bd1623 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 1 May 2008 14:49:59 -0700 Subject: [SCSI] scsi_dh: add hp sw device handler This patch provides the device handler to support the older hp boxes which cannot be upgraded. Signed-off-by: Mike Christie Signed-off-by: Chandra Seetharaman Signed-off-by: James Bottomley --- drivers/scsi/device_handler/Kconfig | 8 ++ drivers/scsi/device_handler/Makefile | 1 + drivers/scsi/device_handler/scsi_dh_hp_sw.c | 202 ++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+) create mode 100644 drivers/scsi/device_handler/scsi_dh_hp_sw.c (limited to 'drivers/scsi/device_handler/Kconfig') diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig index 404f37732627..61578d84fa6e 100644 --- a/drivers/scsi/device_handler/Kconfig +++ b/drivers/scsi/device_handler/Kconfig @@ -16,3 +16,11 @@ config SCSI_DH_RDAC depends on SCSI_DH help If you have a LSI RDAC select y. Otherwise, say N. + +config SCSI_DH_HP_SW + tristate "HP/COMPAQ MSA Device Handler" + depends on SCSI_DH + help + If you have a HP/COMPAQ MSA device that requires START_STOP to + be sent to start it and cannot upgrade the firmware then select y. + Otherwise, say N. diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile index 1a42b3498318..08ec1943f19e 100644 --- a/drivers/scsi/device_handler/Makefile +++ b/drivers/scsi/device_handler/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_SCSI_DH) += scsi_dh.o obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o +obj-$(CONFIG_SCSI_DH_HP_SW) += scsi_dh_hp_sw.o diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c new file mode 100644 index 000000000000..12ceab7b3662 --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -0,0 +1,202 @@ +/* + * Basic HP/COMPAQ MSA 1000 support. This is only needed if your HW cannot be + * upgraded. + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#define HP_SW_NAME "hp_sw" + +#define HP_SW_TIMEOUT (60 * HZ) +#define HP_SW_RETRIES 3 + +struct hp_sw_dh_data { + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + int retries; +}; + +static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev) +{ + struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; + BUG_ON(scsi_dh_data == NULL); + return ((struct hp_sw_dh_data *) scsi_dh_data->buf); +} + +static int hp_sw_done(struct scsi_device *sdev) +{ + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + struct scsi_sense_hdr sshdr; + int rc; + + sdev_printk(KERN_INFO, sdev, "hp_sw_done\n"); + + rc = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sshdr); + if (!rc) + goto done; + switch (sshdr.sense_key) { + case NOT_READY: + if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) { + rc = SCSI_DH_RETRY; + h->retries++; + break; + } + /* fall through */ + default: + h->retries++; + rc = SCSI_DH_IMM_RETRY; + } + +done: + if (rc == SCSI_DH_OK || rc == SCSI_DH_IO) + h->retries = 0; + else if (h->retries > HP_SW_RETRIES) { + h->retries = 0; + rc = SCSI_DH_IO; + } + return rc; +} + +static int hp_sw_activate(struct scsi_device *sdev) +{ + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + struct request *req; + int ret = SCSI_DH_RES_TEMP_UNAVAIL; + + req = blk_get_request(sdev->request_queue, WRITE, GFP_ATOMIC); + if (!req) + goto done; + + sdev_printk(KERN_INFO, sdev, "sending START_STOP."); + + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_FAILFAST; + req->cmd_len = COMMAND_SIZE(START_STOP); + memset(req->cmd, 0, MAX_COMMAND_SIZE); + req->cmd[0] = START_STOP; + req->cmd[4] = 1; /* Start spin cycle */ + req->timeout = HP_SW_TIMEOUT; + req->sense = h->sense; + memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); + req->sense_len = 0; + + ret = blk_execute_rq(req->q, NULL, req, 1); + if (!ret) /* SUCCESS */ + ret = hp_sw_done(sdev); + else + ret = SCSI_DH_IO; +done: + return ret; +} + +static const struct { + char *vendor; + char *model; +} hp_sw_dh_data_list[] = { + {"COMPAQ", "MSA"}, + {"HP", "HSV"}, + {"DEC", "HSG80"}, + {NULL, NULL}, +}; + +static int hp_sw_bus_notify(struct notifier_block *, unsigned long, void *); + +static struct scsi_device_handler hp_sw_dh = { + .name = HP_SW_NAME, + .module = THIS_MODULE, + .nb.notifier_call = hp_sw_bus_notify, + .activate = hp_sw_activate, +}; + +static int hp_sw_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_dh_data *scsi_dh_data; + int i, found = 0; + unsigned long flags; + + if (action == BUS_NOTIFY_ADD_DEVICE) { + for (i = 0; hp_sw_dh_data_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor, + strlen(hp_sw_dh_data_list[i].vendor)) && + !strncmp(sdev->model, hp_sw_dh_data_list[i].model, + strlen(hp_sw_dh_data_list[i].model))) { + found = 1; + break; + } + } + if (!found) + goto out; + + scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *) + + sizeof(struct hp_sw_dh_data) , GFP_KERNEL); + if (!scsi_dh_data) { + sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n", + HP_SW_NAME); + goto out; + } + + scsi_dh_data->scsi_dh = &hp_sw_dh; + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + sdev->scsi_dh_data = scsi_dh_data; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + try_module_get(THIS_MODULE); + + sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME); + } else if (action == BUS_NOTIFY_DEL_DEVICE) { + if (sdev->scsi_dh_data == NULL || + sdev->scsi_dh_data->scsi_dh != &hp_sw_dh) + goto out; + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + scsi_dh_data = sdev->scsi_dh_data; + sdev->scsi_dh_data = NULL; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + module_put(THIS_MODULE); + + sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", HP_SW_NAME); + + kfree(scsi_dh_data); + } + +out: + return 0; +} + +static int __init hp_sw_init(void) +{ + return scsi_register_device_handler(&hp_sw_dh); +} + +static void __exit hp_sw_exit(void) +{ + scsi_unregister_device_handler(&hp_sw_dh); +} + +module_init(hp_sw_init); +module_exit(hp_sw_exit); + +MODULE_DESCRIPTION("HP MSA 1000"); +MODULE_AUTHOR("Mike Christie Date: Thu, 1 May 2008 14:50:04 -0700 Subject: [SCSI] scsi_dh: add EMC Clariion device handler This adds support for EMC Clariions. This patch has the features that currently exists in mainline and advanced features from Ed's patches. Signed-off-by: Chandra Seetharaman Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/device_handler/Kconfig | 6 + drivers/scsi/device_handler/Makefile | 1 + drivers/scsi/device_handler/scsi_dh_emc.c | 499 ++++++++++++++++++++++++++++++ 3 files changed, 506 insertions(+) create mode 100644 drivers/scsi/device_handler/scsi_dh_emc.c (limited to 'drivers/scsi/device_handler/Kconfig') diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig index 61578d84fa6e..2adc0f666b68 100644 --- a/drivers/scsi/device_handler/Kconfig +++ b/drivers/scsi/device_handler/Kconfig @@ -24,3 +24,9 @@ config SCSI_DH_HP_SW If you have a HP/COMPAQ MSA device that requires START_STOP to be sent to start it and cannot upgrade the firmware then select y. Otherwise, say N. + +config SCSI_DH_EMC + tristate "EMC CLARiiON Device Handler" + depends on SCSI_DH + help + If you have a EMC CLARiiON select y. Otherwise, say N. diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile index 08ec1943f19e..35272e93b1c8 100644 --- a/drivers/scsi/device_handler/Makefile +++ b/drivers/scsi/device_handler/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_SCSI_DH) += scsi_dh.o obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o obj-$(CONFIG_SCSI_DH_HP_SW) += scsi_dh_hp_sw.o +obj-$(CONFIG_SCSI_DH_EMC) += scsi_dh_emc.o diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c new file mode 100644 index 000000000000..ed53f14007a2 --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -0,0 +1,499 @@ +/* + * Target driver for EMC CLARiiON AX/CX-series hardware. + * Based on code from Lars Marowsky-Bree + * and Ed Goggin . + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include + +#define CLARIION_NAME "emc_clariion" + +#define CLARIION_TRESPASS_PAGE 0x22 +#define CLARIION_BUFFER_SIZE 0x80 +#define CLARIION_TIMEOUT (60 * HZ) +#define CLARIION_RETRIES 3 +#define CLARIION_UNBOUND_LU -1 + +static unsigned char long_trespass[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x09, /* Page length - 2 */ + 0x81, /* Trespass code + Honor reservation bit */ + 0xff, 0xff, /* Trespass target */ + 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ +}; + +static unsigned char long_trespass_hr[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x09, /* Page length - 2 */ + 0x01, /* Trespass code + Honor reservation bit */ + 0xff, 0xff, /* Trespass target */ + 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ +}; + +static unsigned char short_trespass[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x02, /* Page length - 2 */ + 0x81, /* Trespass code + Honor reservation bit */ + 0xff, /* Trespass target */ +}; + +static unsigned char short_trespass_hr[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x02, /* Page length - 2 */ + 0x01, /* Trespass code + Honor reservation bit */ + 0xff, /* Trespass target */ +}; + +struct clariion_dh_data { + /* + * Use short trespass command (FC-series) or the long version + * (default for AX/CX CLARiiON arrays). + */ + unsigned short_trespass; + /* + * Whether or not (default) to honor SCSI reservations when + * initiating a switch-over. + */ + unsigned hr; + /* I/O buffer for both MODE_SELECT and INQUIRY commands. */ + char buffer[CLARIION_BUFFER_SIZE]; + /* + * SCSI sense buffer for commands -- assumes serial issuance + * and completion sequence of all commands for same multipath. + */ + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + /* which SP (A=0,B=1,UNBOUND=-1) is dflt SP for path's mapped dev */ + int default_sp; + /* which SP (A=0,B=1,UNBOUND=-1) is active for path's mapped dev */ + int current_sp; +}; + +static inline struct clariion_dh_data + *get_clariion_data(struct scsi_device *sdev) +{ + struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data; + BUG_ON(scsi_dh_data == NULL); + return ((struct clariion_dh_data *) scsi_dh_data->buf); +} + +/* + * Parse MODE_SELECT cmd reply. + */ +static int trespass_endio(struct scsi_device *sdev, int result) +{ + int err = SCSI_DH_OK; + struct scsi_sense_hdr sshdr; + struct clariion_dh_data *csdev = get_clariion_data(sdev); + char *sense = csdev->sense; + + if (status_byte(result) == CHECK_CONDITION && + scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) { + sdev_printk(KERN_ERR, sdev, "Found valid sense data 0x%2x, " + "0x%2x, 0x%2x while sending CLARiiON trespass " + "command.\n", sshdr.sense_key, sshdr.asc, + sshdr.ascq); + + if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) && + (sshdr.ascq == 0x00)) { + /* + * Array based copy in progress -- do not send + * mode_select or copy will be aborted mid-stream. + */ + sdev_printk(KERN_INFO, sdev, "Array Based Copy in " + "progress while sending CLARiiON trespass " + "command.\n"); + err = SCSI_DH_DEV_TEMP_BUSY; + } else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) && + (sshdr.ascq == 0x03)) { + /* + * LUN Not Ready - Manual Intervention Required + * indicates in-progress ucode upgrade (NDU). + */ + sdev_printk(KERN_INFO, sdev, "Detected in-progress " + "ucode upgrade NDU operation while sending " + "CLARiiON trespass command.\n"); + err = SCSI_DH_DEV_TEMP_BUSY; + } else + err = SCSI_DH_DEV_FAILED; + } else if (result) { + sdev_printk(KERN_ERR, sdev, "Error 0x%x while sending " + "CLARiiON trespass command.\n", result); + err = SCSI_DH_IO; + } + + return err; +} + +static int parse_sp_info_reply(struct scsi_device *sdev, int result, + int *default_sp, int *current_sp, int *new_current_sp) +{ + int err = SCSI_DH_OK; + struct clariion_dh_data *csdev = get_clariion_data(sdev); + + if (result == 0) { + /* check for in-progress ucode upgrade (NDU) */ + if (csdev->buffer[48] != 0) { + sdev_printk(KERN_NOTICE, sdev, "Detected in-progress " + "ucode upgrade NDU operation while finding " + "current active SP."); + err = SCSI_DH_DEV_TEMP_BUSY; + } else { + *default_sp = csdev->buffer[5]; + + if (csdev->buffer[4] == 2) + /* SP for path is current */ + *current_sp = csdev->buffer[8]; + else { + if (csdev->buffer[4] == 1) + /* SP for this path is NOT current */ + if (csdev->buffer[8] == 0) + *current_sp = 1; + else + *current_sp = 0; + else + /* unbound LU or LUNZ */ + *current_sp = CLARIION_UNBOUND_LU; + } + *new_current_sp = csdev->buffer[8]; + } + } else { + struct scsi_sense_hdr sshdr; + + err = SCSI_DH_IO; + + if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE, + &sshdr)) + sdev_printk(KERN_ERR, sdev, "Found valid sense data " + "0x%2x, 0x%2x, 0x%2x while finding current " + "active SP.", sshdr.sense_key, sshdr.asc, + sshdr.ascq); + else + sdev_printk(KERN_ERR, sdev, "Error 0x%x finding " + "current active SP.", result); + } + + return err; +} + +static int sp_info_endio(struct scsi_device *sdev, int result, + int mode_select_sent, int *done) +{ + struct clariion_dh_data *csdev = get_clariion_data(sdev); + int err_flags, default_sp, current_sp, new_current_sp; + + err_flags = parse_sp_info_reply(sdev, result, &default_sp, + ¤t_sp, &new_current_sp); + + if (err_flags != SCSI_DH_OK) + goto done; + + if (mode_select_sent) { + csdev->default_sp = default_sp; + csdev->current_sp = current_sp; + } else { + /* + * Issue the actual module_selec request IFF either + * (1) we do not know the identity of the current SP OR + * (2) what we think we know is actually correct. + */ + if ((current_sp != CLARIION_UNBOUND_LU) && + (new_current_sp != current_sp)) { + + csdev->default_sp = default_sp; + csdev->current_sp = current_sp; + + sdev_printk(KERN_INFO, sdev, "Ignoring path group " + "switch-over command for CLARiiON SP%s since " + " mapped device is already initialized.", + current_sp ? "B" : "A"); + if (done) + *done = 1; /* as good as doing it */ + } + } +done: + return err_flags; +} + +/* +* Get block request for REQ_BLOCK_PC command issued to path. Currently +* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands. +* +* Uses data and sense buffers in hardware handler context structure and +* assumes serial servicing of commands, both issuance and completion. +*/ +static struct request *get_req(struct scsi_device *sdev, int cmd) +{ + struct clariion_dh_data *csdev = get_clariion_data(sdev); + struct request *rq; + unsigned char *page22; + int len = 0; + + rq = blk_get_request(sdev->request_queue, + (cmd == MODE_SELECT) ? WRITE : READ, GFP_ATOMIC); + if (!rq) { + sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed"); + return NULL; + } + + memset(&rq->cmd, 0, BLK_MAX_CDB); + rq->cmd[0] = cmd; + rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); + + switch (cmd) { + case MODE_SELECT: + if (csdev->short_trespass) { + page22 = csdev->hr ? short_trespass_hr : short_trespass; + len = sizeof(short_trespass); + } else { + page22 = csdev->hr ? long_trespass_hr : long_trespass; + len = sizeof(long_trespass); + } + /* + * Can't DMA from kernel BSS -- must copy selected trespass + * command mode page contents to context buffer which is + * allocated by kmalloc. + */ + BUG_ON((len > CLARIION_BUFFER_SIZE)); + memcpy(csdev->buffer, page22, len); + rq->cmd_flags |= REQ_RW; + rq->cmd[1] = 0x10; + break; + case INQUIRY: + rq->cmd[1] = 0x1; + rq->cmd[2] = 0xC0; + len = CLARIION_BUFFER_SIZE; + memset(csdev->buffer, 0, CLARIION_BUFFER_SIZE); + break; + default: + BUG_ON(1); + break; + } + + rq->cmd[4] = len; + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->cmd_flags |= REQ_FAILFAST; + rq->timeout = CLARIION_TIMEOUT; + rq->retries = CLARIION_RETRIES; + + rq->sense = csdev->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = 0; + + if (blk_rq_map_kern(sdev->request_queue, rq, csdev->buffer, + len, GFP_ATOMIC)) { + __blk_put_request(rq->q, rq); + return NULL; + } + + return rq; +} + +static int send_cmd(struct scsi_device *sdev, int cmd) +{ + struct request *rq = get_req(sdev, cmd); + + if (!rq) + return SCSI_DH_RES_TEMP_UNAVAIL; + + return blk_execute_rq(sdev->request_queue, NULL, rq, 1); +} + +static int clariion_activate(struct scsi_device *sdev) +{ + int result, done = 0; + + result = send_cmd(sdev, INQUIRY); + result = sp_info_endio(sdev, result, 0, &done); + if (result || done) + goto done; + + result = send_cmd(sdev, MODE_SELECT); + result = trespass_endio(sdev, result); + if (result) + goto done; + + result = send_cmd(sdev, INQUIRY); + result = sp_info_endio(sdev, result, 1, NULL); +done: + return result; +} + +static int clariion_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03) + /* + * LUN Not Ready - Manual Intervention Required + * indicates this is a passive path. + * + * FIXME: However, if this is seen and EVPD C0 + * indicates that this is due to a NDU in + * progress, we should set FAIL_PATH too. + * This indicates we might have to do a SCSI + * inquiry in the end_io path. Ugh. + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01) + /* + * An array based copy is in progress. Do not + * fail the path, do not bypass to another PG, + * do not retry. Fail the IO immediately. + * (Actually this is the same conclusion as in + * the default handler, but lets make sure.) + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Unit Attention Code. This is the first IO + * to the new path, so just retry. + */ + return NEEDS_RETRY; + break; + } + + /* success just means we do not care what scsi-ml does */ + return SUCCESS; +} + +static const struct { + char *vendor; + char *model; +} clariion_dev_list[] = { + {"DGC", "RAID"}, + {"DGC", "DISK"}, + {NULL, NULL}, +}; + +static int clariion_bus_notify(struct notifier_block *, unsigned long, void *); + +static struct scsi_device_handler clariion_dh = { + .name = CLARIION_NAME, + .module = THIS_MODULE, + .nb.notifier_call = clariion_bus_notify, + .check_sense = clariion_check_sense, + .activate = clariion_activate, +}; + +/* + * TODO: need some interface so we can set trespass values + */ +static int clariion_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_dh_data *scsi_dh_data; + struct clariion_dh_data *h; + int i, found = 0; + unsigned long flags; + + if (action == BUS_NOTIFY_ADD_DEVICE) { + for (i = 0; clariion_dev_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor, + strlen(clariion_dev_list[i].vendor)) && + !strncmp(sdev->model, clariion_dev_list[i].model, + strlen(clariion_dev_list[i].model))) { + found = 1; + break; + } + } + if (!found) + goto out; + + scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *) + + sizeof(*h) , GFP_KERNEL); + if (!scsi_dh_data) { + sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n", + CLARIION_NAME); + goto out; + } + + scsi_dh_data->scsi_dh = &clariion_dh; + h = (struct clariion_dh_data *) scsi_dh_data->buf; + h->default_sp = CLARIION_UNBOUND_LU; + h->current_sp = CLARIION_UNBOUND_LU; + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + sdev->scsi_dh_data = scsi_dh_data; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + + sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", CLARIION_NAME); + try_module_get(THIS_MODULE); + + } else if (action == BUS_NOTIFY_DEL_DEVICE) { + if (sdev->scsi_dh_data == NULL || + sdev->scsi_dh_data->scsi_dh != &clariion_dh) + goto out; + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); + scsi_dh_data = sdev->scsi_dh_data; + sdev->scsi_dh_data = NULL; + spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + + sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", + CLARIION_NAME); + + kfree(scsi_dh_data); + module_put(THIS_MODULE); + } + +out: + return 0; +} + +static int __init clariion_init(void) +{ + int r; + + r = scsi_register_device_handler(&clariion_dh); + if (r != 0) + printk(KERN_ERR "Failed to register scsi device handler."); + return r; +} + +static void __exit clariion_exit(void) +{ + scsi_unregister_device_handler(&clariion_dh); +} + +module_init(clariion_init); +module_exit(clariion_exit); + +MODULE_DESCRIPTION("EMC CX/AX/FC-family driver"); +MODULE_AUTHOR("Mike Christie , Chandra Seetharaman "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3