From a0164a574a3f284f438081c53fb864d275e54560 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 11:55:21 +0000 Subject: Revert "RTC: sa1100: support sa1100, pxa and mmp soc families" This reverts commit 7cea00657dd4daef66ad95e976d5d67ed94cb97e. The sa1100 cleanups fatally broke the SA1100 RTC driver - the first hint that something is wrong are these compiler warnings: drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73, from drivers/rtc/rtc-sa1100.c:35: arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition and the second problem, which is far more severe, are the different register layouts, resulting in the wrong registers being read on SA11x0 platforms. This patch adds: #define RCNR 0x00 /* RTC Count Register */ #define RTAR 0x04 /* RTC Alarm Register */ #define RTSR 0x08 /* RTC Status Register */ #define RTTR 0x0c /* RTC Timer Trim Register */ but the SA11x0 registers are: #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ #define RTTR __REG(0x90010008) /* RTC Trim Reg. */ #define RTSR __REG(0x90010010) /* RTC Status Reg. */ --- drivers/rtc/rtc-sa1100.c | 256 +++++++++++++++-------------------------------- 1 file changed, 79 insertions(+), 177 deletions(-) (limited to 'drivers/rtc/rtc-sa1100.c') diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 4595d3e645a7..9683daf56d8e 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -27,42 +27,24 @@ #include #include #include +#include #include -#include -#include -#include +#include #include #include +#ifdef CONFIG_ARCH_PXA +#include +#endif + #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 -#define RTC_FREQ 1024 - -#define RCNR 0x00 /* RTC Count Register */ -#define RTAR 0x04 /* RTC Alarm Register */ -#define RTSR 0x08 /* RTC Status Register */ -#define RTTR 0x0c /* RTC Timer Trim Register */ - -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - -#define rtc_readl(sa1100_rtc, reg) \ - readl_relaxed((sa1100_rtc)->base + (reg)) -#define rtc_writel(sa1100_rtc, reg, value) \ - writel_relaxed((value), (sa1100_rtc)->base + (reg)) - -struct sa1100_rtc { - struct resource *ress; - void __iomem *base; - struct clk *clk; - int irq_1Hz; - int irq_Alrm; - struct rtc_device *rtc; - spinlock_t lock; /* Protects this structure */ -}; + +static const unsigned long RTC_FREQ = 1024; +static struct rtc_time rtc_alarm; +static DEFINE_SPINLOCK(sa1100_rtc_lock); + /* * Calculate the next alarm time given the requested alarm time mask * and the current time. @@ -93,23 +75,22 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); - struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); unsigned int rtsr; unsigned long events = 0; - spin_lock(&sa1100_rtc->lock); + spin_lock(&sa1100_rtc_lock); + rtsr = RTSR; /* clear interrupt sources */ - rtsr = rtc_readl(sa1100_rtc, RTSR); - rtc_writel(sa1100_rtc, RTSR, 0); - + RTSR = 0; /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_probe(). */ if (rtsr & (RTSR_ALE | RTSR_HZE)) { /* This is the original code, before there was the if test * above. This code does not clear interrupts that were not * enabled. */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2)); + RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); } else { /* For some reason, it is possible to enter this routine * without interruptions enabled, it has been tested with @@ -118,13 +99,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) * This situation leads to an infinite "loop" of interrupt * routine calling and as a result the processor seems to * lock on its first call to open(). */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); + RTSR = RTSR_AL | RTSR_HZ; } /* clear alarm interrupt if it has occurred */ if (rtsr & RTSR_AL) rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE)); + RTSR = rtsr & (RTSR_ALE | RTSR_HZE); /* update irq data & counter */ if (rtsr & RTSR_AL) @@ -132,100 +113,86 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) if (rtsr & RTSR_HZ) events |= RTC_UF | RTC_IRQF; - rtc_update_irq(sa1100_rtc->rtc, 1, events); + rtc_update_irq(rtc, 1, events); - spin_unlock(&sa1100_rtc->lock); + spin_unlock(&sa1100_rtc_lock); return IRQ_HANDLED; } static int sa1100_rtc_open(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); int ret; + struct platform_device *plat_dev = to_platform_device(dev); + struct rtc_device *rtc = platform_get_drvdata(plat_dev); - ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt, - IRQF_DISABLED, "rtc 1Hz", dev); + ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, + "rtc 1Hz", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz); + dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); goto fail_ui; } - ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt, - IRQF_DISABLED, "rtc Alrm", dev); + ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, + "rtc Alrm", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm); + dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); goto fail_ai; } - sa1100_rtc->rtc->max_user_freq = RTC_FREQ; - rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ); + rtc->max_user_freq = RTC_FREQ; + rtc_irq_set_freq(rtc, NULL, RTC_FREQ); return 0; fail_ai: - free_irq(sa1100_rtc->irq_1Hz, dev); + free_irq(IRQ_RTC1Hz, dev); fail_ui: return ret; } static void sa1100_rtc_release(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + spin_lock_irq(&sa1100_rtc_lock); + RTSR = 0; + spin_unlock_irq(&sa1100_rtc_lock); - spin_lock_irq(&sa1100_rtc->lock); - rtc_writel(sa1100_rtc, RTSR, 0); - spin_unlock_irq(&sa1100_rtc->lock); - - free_irq(sa1100_rtc->irq_Alrm, dev); - free_irq(sa1100_rtc->irq_1Hz, dev); + free_irq(IRQ_RTCAlrm, dev); + free_irq(IRQ_RTC1Hz, dev); } static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - unsigned int rtsr; - - spin_lock_irq(&sa1100_rtc->lock); - - rtsr = rtc_readl(sa1100_rtc, RTSR); + spin_lock_irq(&sa1100_rtc_lock); if (enabled) - rtsr |= RTSR_ALE; + RTSR |= RTSR_ALE; else - rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr); - - spin_unlock_irq(&sa1100_rtc->lock); + RTSR &= ~RTSR_ALE; + spin_unlock_irq(&sa1100_rtc_lock); return 0; } static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - - rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm); + rtc_time_to_tm(RCNR, tm); return 0; } static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); unsigned long time; int ret; ret = rtc_tm_to_time(tm, &time); if (ret == 0) - rtc_writel(sa1100_rtc, RCNR, time); + RCNR = time; return ret; } static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - unsigned long time; - unsigned int rtsr; + u32 rtsr; - time = rtc_readl(sa1100_rtc, RCNR); - rtc_time_to_tm(time, &alrm->time); - rtsr = rtc_readl(sa1100_rtc, RTSR); + memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time)); + rtsr = RTSR; alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0; alrm->pending = (rtsr & RTSR_AL) ? 1 : 0; return 0; @@ -233,39 +200,31 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); struct rtc_time now_tm, alarm_tm; - unsigned long time, alarm; - unsigned int rtsr; - - spin_lock_irq(&sa1100_rtc->lock); + int ret; - time = rtc_readl(sa1100_rtc, RCNR); - rtc_time_to_tm(time, &now_tm); - rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time); - rtc_tm_to_time(&alarm_tm, &alarm); - rtc_writel(sa1100_rtc, RTAR, alarm); + spin_lock_irq(&sa1100_rtc_lock); - rtsr = rtc_readl(sa1100_rtc, RTSR); + now = RCNR; + rtc_time_to_tm(now, &now_tm); + rtc_next_alarm_time(&alarm_tm, &now_tm, alrm->time); + rtc_tm_to_time(&alarm_tm, &time); + RTAR = time; if (alrm->enabled) - rtsr |= RTSR_ALE; + RTSR |= RTSR_ALE; else - rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr); + RTSR &= ~RTSR_ALE; - spin_unlock_irq(&sa1100_rtc->lock); + spin_unlock_irq(&sa1100_rtc_lock); - return 0; + return ret; } static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR); + seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR); - seq_printf(seq, "trim/divider\t\t: 0x%08x\n", - rtc_readl(sa1100_rtc, RTTR)); - seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", - rtc_readl(sa1100_rtc, RTSR)); return 0; } @@ -282,51 +241,7 @@ static const struct rtc_class_ops sa1100_rtc_ops = { static int sa1100_rtc_probe(struct platform_device *pdev) { - struct sa1100_rtc *sa1100_rtc; - unsigned int rttr; - int ret; - - sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL); - if (!sa1100_rtc) - return -ENOMEM; - - spin_lock_init(&sa1100_rtc->lock); - platform_set_drvdata(pdev, sa1100_rtc); - - ret = -ENXIO; - sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!sa1100_rtc->ress) { - dev_err(&pdev->dev, "No I/O memory resource defined\n"); - goto err_ress; - } - - sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0); - if (sa1100_rtc->irq_1Hz < 0) { - dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); - goto err_ress; - } - sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1); - if (sa1100_rtc->irq_Alrm < 0) { - dev_err(&pdev->dev, "No alarm IRQ resource defined\n"); - goto err_ress; - } - - ret = -ENOMEM; - sa1100_rtc->base = ioremap(sa1100_rtc->ress->start, - resource_size(sa1100_rtc->ress)); - if (!sa1100_rtc->base) { - dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n"); - goto err_map; - } - - sa1100_rtc->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(sa1100_rtc->clk)) { - dev_err(&pdev->dev, "failed to find rtc clock source\n"); - ret = PTR_ERR(sa1100_rtc->clk); - goto err_clk; - } - clk_prepare(sa1100_rtc->clk); - clk_enable(sa1100_rtc->clk); + struct rtc_device *rtc; /* * According to the manual we should be able to let RTTR be zero @@ -335,24 +250,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * If the clock divider is uninitialized then reset it to the * default value to get the 1Hz clock. */ - if (rtc_readl(sa1100_rtc, RTTR) == 0) { - rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - rtc_writel(sa1100_rtc, RTTR, rttr); - dev_warn(&pdev->dev, "warning: initializing default clock" - " divider/trim value\n"); + if (RTTR == 0) { + RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); + dev_warn(&pdev->dev, "warning: " + "initializing default clock divider/trim value\n"); /* The current RTC value probably doesn't make sense either */ - rtc_writel(sa1100_rtc, RCNR, 0); + RCNR = 0; } device_init_wakeup(&pdev->dev, 1); - sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, - &sa1100_rtc_ops, THIS_MODULE); - if (IS_ERR(sa1100_rtc->rtc)) { - dev_err(&pdev->dev, "Failed to register RTC device -> %d\n", - ret); - goto err_rtc_reg; - } + rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, + THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); + /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_interrupt(). * @@ -375,46 +290,33 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * * Notice that clearing bit 1 and 0 is accomplished by writting ONES to * the corresponding bits in RTSR. */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); + RTSR = RTSR_AL | RTSR_HZ; return 0; - -err_rtc_reg: -err_clk: - iounmap(sa1100_rtc->base); -err_ress: -err_map: - kfree(sa1100_rtc); - return ret; } static int sa1100_rtc_remove(struct platform_device *pdev) { - struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); + + if (rtc) + rtc_device_unregister(rtc); - rtc_device_unregister(sa1100_rtc->rtc); - clk_disable(sa1100_rtc->clk); - clk_unprepare(sa1100_rtc->clk); - iounmap(sa1100_rtc->base); return 0; } #ifdef CONFIG_PM static int sa1100_rtc_suspend(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - enable_irq_wake(sa1100_rtc->irq_Alrm); + enable_irq_wake(IRQ_RTCAlrm); return 0; } static int sa1100_rtc_resume(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - disable_irq_wake(sa1100_rtc->irq_Alrm); + disable_irq_wake(IRQ_RTCAlrm); return 0; } -- cgit v1.2.1