From 29315e8770c20cbfe607ad962d87867115a44555 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 29 Jun 2006 20:12:30 -0700 Subject: [TG3]: Add tg3_netif_stop() in vlan functions Add tg3_netif_stop() when changing the vlgrp (vlan group) pointer. It is necessary to quiesce the device before changing that pointer. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 35f931638750..2447fa3b471b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8738,6 +8738,9 @@ static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) { struct tg3 *tp = netdev_priv(dev); + if (netif_running(dev)) + tg3_netif_stop(tp); + tg3_full_lock(tp, 0); tp->vlgrp = grp; @@ -8746,16 +8749,25 @@ static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) __tg3_set_rx_mode(dev); tg3_full_unlock(tp); + + if (netif_running(dev)) + tg3_netif_start(tp); } static void tg3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) { struct tg3 *tp = netdev_priv(dev); + if (netif_running(dev)) + tg3_netif_stop(tp); + tg3_full_lock(tp, 0); if (tp->vlgrp) tp->vlgrp->vlan_devices[vid] = NULL; tg3_full_unlock(tp); + + if (netif_running(dev)) + tg3_netif_start(tp); } #endif -- cgit v1.2.1 From f92905deb9bc89834dac247ca1a0d905ebcf629b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 29 Jun 2006 20:14:29 -0700 Subject: [TG3]: Add rx BD workaround Add workaround to limit the burst size of rx BDs being DMA'ed to the chip. This works around hardware errata on a number of 5750, 5752, and 5755 chips. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 30 ++++++++++++++++++++++++++++-- drivers/net/tg3.h | 1 + 2 files changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2447fa3b471b..c32655ca3c46 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3195,7 +3195,7 @@ static int tg3_vlan_rx(struct tg3 *tp, struct sk_buff *skb, u16 vlan_tag) */ static int tg3_rx(struct tg3 *tp, int budget) { - u32 work_mask; + u32 work_mask, rx_std_posted = 0; u32 sw_idx = tp->rx_rcb_ptr; u16 hw_idx; int received; @@ -3222,6 +3222,7 @@ static int tg3_rx(struct tg3 *tp, int budget) mapping); skb = tp->rx_std_buffers[desc_idx].skb; post_ptr = &tp->rx_std_ptr; + rx_std_posted++; } else if (opaque_key == RXD_OPAQUE_RING_JUMBO) { dma_addr = pci_unmap_addr(&tp->rx_jumbo_buffers[desc_idx], mapping); @@ -3309,6 +3310,15 @@ static int tg3_rx(struct tg3 *tp, int budget) next_pkt: (*post_ptr)++; + + if (unlikely(rx_std_posted >= tp->rx_std_max_post)) { + u32 idx = *post_ptr % TG3_RX_RING_SIZE; + + tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + + TG3_64BIT_REG_LOW, idx); + work_mask &= ~RXD_OPAQUE_RING_STD; + rx_std_posted = 0; + } next_pkt_nopost: sw_idx++; sw_idx %= TG3_RX_RCB_RING_SIZE(tp); @@ -5981,7 +5991,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) } /* Setup replenish threshold. */ - tw32(RCVBDI_STD_THRESH, tp->rx_pending / 8); + val = tp->rx_pending / 8; + if (val == 0) + val = 1; + else if (val > tp->rx_std_max_post) + val = tp->rx_std_max_post; + + tw32(RCVBDI_STD_THRESH, val); /* Initialize TG3_BDINFO's at: * RCVDBDI_STD_BD: standard eth size rx ring @@ -10545,6 +10561,16 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) tp->rx_offset = 0; + tp->rx_std_max_post = TG3_RX_RING_SIZE; + + /* Increment the rx prod index on the rx std ring by at most + * 8 for these chips to workaround hw errata. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755) + tp->rx_std_max_post = 8; + /* By default, disable wake-on-lan. User can change this * using ETHTOOL_SWOL. */ diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 8209da5dd15f..e9177f8521df 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2137,6 +2137,7 @@ struct tg3 { struct tg3_rx_buffer_desc *rx_std; struct ring_info *rx_std_buffers; dma_addr_t rx_std_mapping; + u32 rx_std_max_post; struct tg3_rx_buffer_desc *rx_jumbo; struct ring_info *rx_jumbo_buffers; -- cgit v1.2.1 From 1661394e78b3b2cc868cd0e89c1066974302aaca Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 29 Jun 2006 20:15:13 -0700 Subject: [TG3]: Turn on hw fix for ASF problems Clear a bit to enable a hardware fix for some ASF related problem. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 8 ++++++-- drivers/net/tg3.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index c32655ca3c46..2c36e70e37e5 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -6157,8 +6157,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) #endif /* Receive/send statistics. */ - if ((rdmac_mode & RDMAC_MODE_FIFO_SIZE_128) && - (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) { + if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) { + val = tr32(RCVLPC_STATS_ENABLE); + val &= ~RCVLPC_STATSENAB_DACK_FIX; + tw32(RCVLPC_STATS_ENABLE, val); + } else if ((rdmac_mode & RDMAC_MODE_FIFO_SIZE_128) && + (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) { val = tr32(RCVLPC_STATS_ENABLE); val &= ~RCVLPC_STATSENAB_LNGBRST_RFIX; tw32(RCVLPC_STATS_ENABLE, val); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index e9177f8521df..97a860433b50 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -760,6 +760,7 @@ #define RCVLPC_STATSCTRL_ENABLE 0x00000001 #define RCVLPC_STATSCTRL_FASTUPD 0x00000002 #define RCVLPC_STATS_ENABLE 0x00002018 +#define RCVLPC_STATSENAB_DACK_FIX 0x00040000 #define RCVLPC_STATSENAB_LNGBRST_RFIX 0x00400000 #define RCVLPC_STATS_INCMASK 0x0000201c /* 0x2020 --> 0x2100 unused */ -- cgit v1.2.1 From 52c0fd834ea0e7c6ef8616ce0a1f85bac4233ed7 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 29 Jun 2006 20:15:54 -0700 Subject: [TG3]: Add TSO workaround using GSO Use GSO to workaround a rare TSO bug on some chips. This hardware bug may be triggered when the TSO header size is greater than 80 bytes. When this condition is detected in a TSO packet, the driver will use GSO to segment the packet to workaround the hardware bug. Thanks to Juergen Kreileder for reporting the problem and collecting traces to help debug the problem. And thanks to Herbert Xu for providing the GSO mechanism that happens to be the perfect workaround for this problem. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++---- drivers/net/tg3.h | 3 ++- 2 files changed, 51 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2c36e70e37e5..63d4b2c797e8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3880,6 +3880,40 @@ out_unlock: return NETDEV_TX_OK; } +#if TG3_TSO_SUPPORT != 0 +static int tg3_start_xmit_dma_bug(struct sk_buff *, struct net_device *); + +/* Use GSO to workaround a rare TSO bug that may be triggered when the + * TSO header is greater than 80 bytes. + */ +static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb) +{ + struct sk_buff *segs, *nskb; + + /* Estimate the number of fragments in the worst case */ + if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { + netif_stop_queue(tp->dev); + return NETDEV_TX_BUSY; + } + + segs = skb_gso_segment(skb, tp->dev->features & ~NETIF_F_TSO); + if (unlikely(IS_ERR(segs))) + goto tg3_tso_bug_end; + + do { + nskb = segs; + segs = segs->next; + nskb->next = NULL; + tg3_start_xmit_dma_bug(nskb, tp->dev); + } while (segs); + +tg3_tso_bug_end: + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} +#endif + /* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and * support TG3_FLG2_HW_TSO_1 or firmware TSO only. */ @@ -3916,7 +3950,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) mss = 0; if (skb->len > (tp->dev->mtu + ETH_HLEN) && (mss = skb_shinfo(skb)->gso_size) != 0) { - int tcp_opt_len, ip_tcp_len; + int tcp_opt_len, ip_tcp_len, hdr_len; if (skb_header_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { @@ -3927,11 +3961,16 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) tcp_opt_len = ((skb->h.th->doff - 5) * 4); ip_tcp_len = (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); + hdr_len = ip_tcp_len + tcp_opt_len; + if (unlikely((ETH_HLEN + hdr_len) > 80) && + (tp->tg3_flags2 & TG3_FLG2_HW_TSO_1_BUG)) + return (tg3_tso_bug(tp, skb)); + base_flags |= (TXD_FLAG_CPU_PRE_DMA | TXD_FLAG_CPU_POST_DMA); skb->nh.iph->check = 0; - skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len); + skb->nh.iph->tot_len = htons(mss + hdr_len); if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { skb->h.th->check = 0; base_flags &= ~TXD_FLAG_TCPUDP_CSUM; @@ -10192,8 +10231,14 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) { tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2; tp->tg3_flags2 |= TG3_FLG2_1SHOT_MSI; - } else - tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1; + } else { + tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | + TG3_FLG2_HW_TSO_1_BUG; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5750 && + tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2) + tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_1_BUG; + } } if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 && diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 97a860433b50..ba2c98711c88 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -125,6 +125,7 @@ #define CHIPREV_ID_5750_A0 0x4000 #define CHIPREV_ID_5750_A1 0x4001 #define CHIPREV_ID_5750_A3 0x4003 +#define CHIPREV_ID_5750_C2 0x4202 #define CHIPREV_ID_5752_A0_HW 0x5000 #define CHIPREV_ID_5752_A0 0x6000 #define CHIPREV_ID_5752_A1 0x6001 @@ -2193,7 +2194,7 @@ struct tg3 { #define TG3_FLAG_INIT_COMPLETE 0x80000000 u32 tg3_flags2; #define TG3_FLG2_RESTART_TIMER 0x00000001 -/* 0x00000002 available */ +#define TG3_FLG2_HW_TSO_1_BUG 0x00000002 #define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004 #define TG3_FLG2_IS_5788 0x00000008 #define TG3_FLG2_MAX_RXPEND_64 0x00000010 -- cgit v1.2.1 From 2c6059bca8cf5e7f722d909f2e5edda0491ac604 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 29 Jun 2006 20:16:28 -0700 Subject: [TG3]: Update version and reldate Update version to 3.61. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 63d4b2c797e8..47c96fc01265 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -69,8 +69,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.60" -#define DRV_MODULE_RELDATE "June 17, 2006" +#define DRV_MODULE_VERSION "3.61" +#define DRV_MODULE_RELDATE "June 29, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.1 From f83ef8c0b58dac17211a4c0b6df0e2b1bd6637b1 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Jun 2006 13:37:03 -0700 Subject: [IPV6]: Added GSO support for TCPv6 This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju . His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/s2io.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 3defe5d4f7d3..74764694c64f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3960,7 +3960,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_2 = 0; #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->gso_size; - if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV4) { + if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { txdp->Control_1 |= TXD_TCP_LSO_EN; txdp->Control_1 |= TXD_TCP_LSO_MSS(mss); } @@ -3980,7 +3980,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) } frg_len = skb->len - skb->data_len; - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDPV4) { + if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) { int ufo_size; ufo_size = skb_shinfo(skb)->gso_size; @@ -4009,7 +4009,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Host_Control = (unsigned long) skb; txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len); - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDPV4) + if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) txdp->Control_1 |= TXD_UFO_EN; frg_cnt = skb_shinfo(skb)->nr_frags; @@ -4024,12 +4024,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) (sp->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size); - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDPV4) + if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) txdp->Control_1 |= TXD_UFO_EN; } txdp->Control_1 |= TXD_GATHER_CODE_LAST; - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDPV4) + if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) frg_cnt++; /* as Txd0 was used for inband header */ tx_fifo = mac_control->tx_FIFO_start[queue]; @@ -4043,7 +4043,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) if (mss) val64 |= TX_FIFO_SPECIAL_FUNC; #endif - if (skb_shinfo(skb)->gso_type == SKB_GSO_UDPV4) + if (skb_shinfo(skb)->gso_type == SKB_GSO_UDP) val64 |= TX_FIFO_SPECIAL_FUNC; writeq(val64, &tx_fifo->List_Control); @@ -7020,6 +7020,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->features |= NETIF_F_HIGHDMA; #ifdef NETIF_F_TSO dev->features |= NETIF_F_TSO; +#endif +#ifdef NETIF_F_TSO6 + dev->features |= NETIF_F_TSO6; #endif if (sp->device_type & XFRAME_II_DEVICE) { dev->features |= NETIF_F_UFO; -- cgit v1.2.1