From 2b60100bf04aba28133ccb24efd85f72fb1a5494 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 13 Oct 2009 12:47:39 +0300 Subject: wl1271: Add structure for firmware configuration values In order to make the firmware configuration more manageable, collect hardcoded configuration values into one data structure, and set default values there. Add the SoftGemini BT/WLAN coex paramters into the config structure. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 178 ++++++++++++++++++++++++++++++ 1 file changed, 178 insertions(+) create mode 100644 drivers/net/wireless/wl12xx/wl1271_conf.h (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h new file mode 100644 index 000000000000..1d6a44bec1cb --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -0,0 +1,178 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL1271_CONF_H__ +#define __WL1271_CONF_H__ + +enum { + CONF_HW_BIT_RATE_1MBPS = BIT(0), + CONF_HW_BIT_RATE_2MBPS = BIT(1), + CONF_HW_BIT_RATE_5_5MBPS = BIT(2), + CONF_HW_BIT_RATE_6MBPS = BIT(3), + CONF_HW_BIT_RATE_9MBPS = BIT(4), + CONF_HW_BIT_RATE_11MBPS = BIT(5), + CONF_HW_BIT_RATE_12MBPS = BIT(6), + CONF_HW_BIT_RATE_18MBPS = BIT(7), + CONF_HW_BIT_RATE_22MBPS = BIT(8), + CONF_HW_BIT_RATE_24MBPS = BIT(9), + CONF_HW_BIT_RATE_36MBPS = BIT(10), + CONF_HW_BIT_RATE_48MBPS = BIT(11), + CONF_HW_BIT_RATE_54MBPS = BIT(12), + CONF_HW_BIT_RATE_MCS_0 = BIT(13), + CONF_HW_BIT_RATE_MCS_1 = BIT(14), + CONF_HW_BIT_RATE_MCS_2 = BIT(15), + CONF_HW_BIT_RATE_MCS_3 = BIT(16), + CONF_HW_BIT_RATE_MCS_4 = BIT(17), + CONF_HW_BIT_RATE_MCS_5 = BIT(18), + CONF_HW_BIT_RATE_MCS_6 = BIT(19), + CONF_HW_BIT_RATE_MCS_7 = BIT(20) +}; + +enum { + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_6MBPS = 3, + CONF_HW_RATE_INDEX_9MBPS = 4, + CONF_HW_RATE_INDEX_11MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_22MBPS = 8, + CONF_HW_RATE_INDEX_24MBPS = 9, + CONF_HW_RATE_INDEX_36MBPS = 10, + CONF_HW_RATE_INDEX_48MBPS = 11, + CONF_HW_RATE_INDEX_54MBPS = 12, + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, +}; + +struct conf_sg_settings { + /* + * Defines the PER threshold in PPM of the BT voice of which reaching + * this value will trigger raising the priority of the BT voice by + * the BT IP until next NFS sample interval time as defined in + * nfs_sample_interval. + * + * Unit: PER value in PPM (parts per million) + * #Error_packets / #Total_packets + + * Range: u32 + */ + u32 per_threshold; + + /* + * This value is an absolute time in micro-seconds to limit the + * maximum scan duration compensation while in SG + */ + u32 max_scan_compensation_time; + + /* Defines the PER threshold of the BT voice of which reaching this + * value will trigger raising the priority of the BT voice until next + * NFS sample interval time as defined in sample_interval. + * + * Unit: msec + * Range: 1-65000 + */ + u16 nfs_sample_interval; + + /* + * Defines the load ratio for the BT. + * The WLAN ratio is: 100 - load_ratio + * + * Unit: Percent + * Range: 0-100 + */ + u8 load_ratio; + + /* + * true - Co-ex is allowed to enter/exit P.S automatically and + * transparently to the host + * + * false - Co-ex is disallowed to enter/exit P.S and will trigger an + * event to the host to notify for the need to enter/exit P.S + * due to BT change state + * + */ + u8 auto_ps_mode; + + /* + * This parameter defines the compensation percentage of num of probe + * requests in case scan is initiated during BT voice/BT ACL + * guaranteed link. + * + * Unit: Percent + * Range: 0-255 (0 - No compensation) + */ + u8 probe_req_compensation; + + /* + * This parameter defines the compensation percentage of scan window + * size in case scan is initiated during BT voice/BT ACL Guaranteed + * link. + * + * Unit: Percent + * Range: 0-255 (0 - No compensation) + */ + u8 scan_window_compensation; + + /* + * Defines the antenna configuration. + * + * Range: 0 - Single Antenna; 1 - Dual Antenna + */ + u8 antenna_config; + + /* + * The percent out of the Max consecutive beacon miss roaming trigger + * which is the threshold for raising the priority of beacon + * reception. + * + * Range: 1-100 + * N = MaxConsecutiveBeaconMiss + * P = coexMaxConsecutiveBeaconMissPrecent + * Threshold = MIN( N-1, round(N * P / 100)) + */ + u8 beacon_miss_threshold; + + /* + * The RX rate threshold below which rate adaptation is assumed to be + * occurring at the AP which will raise priority for ACTIVE_RX and RX + * SP. + * + * Range: HW_BIT_RATE_* + */ + u32 rate_adaptation_threshold; + + /* + * The SNR above which the RX rate threshold indicating AP rate + * adaptation is valid + * + * Range: -128 - 127 + */ + s8 rate_adaptation_snr; +}; + +struct conf_drv_settings { + struct conf_sg_settings sg; +}; + +#endif -- cgit v1.2.1 From 8793f9bb19c00b26532e37f1f516e1d9c7bc0476 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 13 Oct 2009 12:47:40 +0300 Subject: wl1271: Add config structure for RX path parameters Add a configuration structure for RX path parameters, and set default configuration values there. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 85 +++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 1d6a44bec1cb..8bf8bff54b59 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -171,8 +171,93 @@ struct conf_sg_settings { s8 rate_adaptation_snr; }; +enum conf_rx_queue_type { + CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ + CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ +}; + +struct conf_rx_settings { + /* + * The maximum amount of time, in TU, before the + * firmware discards the MSDU. + * + * Range: 0 - 0xFFFFFFFF + */ + u32 rx_msdu_life_time; + + /* + * Packet detection threshold in the PHY. + * + * FIXME: details unknown. + */ + u32 packet_detection_threshold; + + /* + * The longest time the STA will wait to receive traffic from the AP + * after a PS-poll has been transmitted. + * + * Range: 0 - 200000 + */ + u16 ps_poll_timeout; + /* + * The longest time the STA will wait to receive traffic from the AP + * after a frame has been sent from an UPSD enabled queue. + * + * Range: 0 - 200000 + */ + u16 upsd_timeout; + + /* + * The number of octets in an MPDU, below which an RTS/CTS + * handshake is not performed. + * + * Range: 0 - 4096 + */ + u16 rts_threshold; + + /* + * The RX Clear Channel Assessment threshold in the PHY + * (the energy threshold). + * + * Range: ENABLE_ENERGY_D == 0x140A + * DISABLE_ENERGY_D == 0xFFEF + */ + u16 rx_cca_threshold; + + /* + * Occupied Rx mem-blocks number which requires interrupting the host + * (0 = no buffering, 0xffff = disabled). + * + * Range: u16 + */ + u16 irq_blk_threshold; + + /* + * Rx packets number which requires interrupting the host + * (0 = no buffering). + * + * Range: u16 + */ + u16 irq_pkt_threshold; + + /* + * Max time in msec the FW may delay RX-Complete interrupt. + * + * Range: 1 - 100 + */ + u16 irq_timeout; + + /* + * The RX queue type. + * + * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, + */ + u8 queue_type; +}; + struct conf_drv_settings { struct conf_sg_settings sg; + struct conf_rx_settings rx; }; #endif -- cgit v1.2.1 From 45b531a86f93c82d8e390e19a6258111b3627bb0 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 13 Oct 2009 12:47:41 +0300 Subject: wl1271: Add config structure for TX path parameters Add a configuration structure for TX path parameters, and set defalt configuration values there. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 187 ++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 8bf8bff54b59..3c5ce3100e6e 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -255,9 +255,196 @@ struct conf_rx_settings { u8 queue_type; }; +#define CONF_TX_MAX_RATE_CLASSES 8 + +#define CONF_TX_RATE_MASK_UNSPECIFIED 0 +#define CONF_TX_RATE_MASK_ALL 0x1eff +#define CONF_TX_RATE_RETRY_LIMIT 10 + +struct conf_tx_rate_class { + + /* + * The rates enabled for this rate class. + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 enabled_rates; + + /* + * The dot11 short retry limit used for TX retries. + * + * Range: u8 + */ + u8 short_retry_limit; + + /* + * The dot11 long retry limit used for TX retries. + * + * Range: u8 + */ + u8 long_retry_limit; + + /* + * Flags controlling the attributes of TX transmission. + * + * Range: bit 0: Truncate - when set, FW attempts to send a frame stop + * when the total valid per-rate attempts have + * been exhausted; otherwise transmissions + * will continue at the lowest available rate + * until the appropriate one of the + * short_retry_limit, long_retry_limit, + * dot11_max_transmit_msdu_life_time, or + * max_tx_life_time, is exhausted. + * 1: Preamble Override - indicates if the preamble type + * should be used in TX. + * 2: Preamble Type - the type of the preamble to be used by + * the policy (0 - long preamble, 1 - short preamble. + */ + u8 aflags; +}; + +#define CONF_TX_MAX_AC_COUNT 4 + +/* Slot number setting to start transmission at PIFS interval */ +#define CONF_TX_AIFS_PIFS 1 +/* Slot number setting to start transmission at DIFS interval normal + * DCF access */ +#define CONF_TX_AIFS_DIFS 2 + + +enum conf_tx_ac { + CONF_TX_AC_BE = 0, /* best effort / legacy */ + CONF_TX_AC_BK = 1, /* background */ + CONF_TX_AC_VI = 2, /* video */ + CONF_TX_AC_VO = 3, /* voice */ + CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ + CONF_TX_AC_ANY_TID = 0x1f +}; + +struct conf_tx_ac_category { + /* + * The AC class identifier. + * + * Range: enum conf_tx_ac + */ + u8 ac; + + /* + * The contention window minimum size (in slots) for the access + * class. + * + * Range: u8 + */ + u8 cw_min; + + /* + * The contention window maximum size (in slots) for the access + * class. + * + * Range: u8 + */ + u16 cw_max; + + /* + * The AIF value (in slots) for the access class. + * + * Range: u8 + */ + u8 aifsn; + + /* + * The TX Op Limit (in microseconds) for the access class. + * + * Range: u16 + */ + u16 tx_op_limit; +}; + +#define CONF_TX_MAX_TID_COUNT 7 + +enum { + CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ + CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ + CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ +}; + +enum { + CONF_PS_SCHEME_LEGACY = 0, + CONF_PS_SCHEME_UPSD_TRIGGER = 1, + CONF_PS_SCHEME_LEGACY_PSPOLL = 2, + CONF_PS_SCHEME_SAPSD = 3, +}; + +enum { + CONF_ACK_POLICY_LEGACY = 0, + CONF_ACK_POLICY_NO_ACK = 1, + CONF_ACK_POLICY_BLOCK = 2, +}; + + +struct conf_tx_tid { + u8 queue_id; + u8 channel_type; + u8 tsid; + u8 ps_scheme; + u8 ack_policy; + u32 apsd_conf[2]; +}; + +struct conf_tx_settings { + /* + * The TX ED value for TELEC Enable/Disable. + * + * Range: 0, 1 + */ + u8 tx_energy_detection; + + /* + * Configuration for rate classes for TX (currently only one + * rate class supported.) + */ + struct conf_tx_rate_class rc_conf; + + /* + * Configuration for access categories for TX rate control. + */ + u8 ac_conf_count; + struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; + + /* + * Configuration for TID parameters. + */ + u8 tid_conf_count; + struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; + + /* + * The TX fragmentation threshold. + * + * Range: u16 + */ + u16 frag_threshold; + + /* + * Max time in msec the FW may delay frame TX-Complete interrupt. + * + * Range: u16 + */ + u16 tx_compl_timeout; + + /* + * Completed TX packet count which requires to issue the TX-Complete + * interrupt. + * + * Range: u16 + */ + u16 tx_compl_threshold; + +}; + struct conf_drv_settings { struct conf_sg_settings sg; struct conf_rx_settings rx; + struct conf_tx_settings tx; }; #endif -- cgit v1.2.1 From 51f2be24328957f9e2acf116b1b1d2dfd10bf41f Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 13 Oct 2009 12:47:42 +0300 Subject: wl1271: Add config structure for connection management parameters Add a configuration structure for connection management parameters, and set default configuration values there. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 251 ++++++++++++++++++++++++++++++ 1 file changed, 251 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 3c5ce3100e6e..f08e509bd69f 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -441,10 +441,261 @@ struct conf_tx_settings { }; +enum { + CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ + CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ + CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ + CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ + CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F +}; + +#define CONF_MAX_BCN_FILT_IE_COUNT 32 + +#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) +#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) + +#define CONF_BCN_IE_OUI_LEN 3 +#define CONF_BCN_IE_VER_LEN 2 + +struct conf_bcn_filt_rule { + /* + * IE number to which to associate a rule. + * + * Range: u8 + */ + u8 ie; + + /* + * Rule to associate with the specific ie. + * + * Range: CONF_BCN_RULE_PASS_ON_* + */ + u8 rule; + + /* + * OUI for the vendor specifie IE (221) + */ + u8 oui[CONF_BCN_IE_OUI_LEN]; + + /* + * Type for the vendor specifie IE (221) + */ + u8 type; + + /* + * Version for the vendor specifie IE (221) + */ + u8 version[CONF_BCN_IE_VER_LEN]; +}; + +#define CONF_MAX_RSSI_SNR_TRIGGERS 8 + +enum { + CONF_TRIG_METRIC_RSSI_BEACON = 0, + CONF_TRIG_METRIC_RSSI_DATA, + CONF_TRIG_METRIC_SNR_BEACON, + CONF_TRIG_METRIC_SNR_DATA +}; + +enum { + CONF_TRIG_EVENT_TYPE_LEVEL = 0, + CONF_TRIG_EVENT_TYPE_EDGE +}; + +enum { + CONF_TRIG_EVENT_DIR_LOW = 0, + CONF_TRIG_EVENT_DIR_HIGH, + CONF_TRIG_EVENT_DIR_BIDIR +}; + + +struct conf_sig_trigger { + /* + * The RSSI / SNR threshold value. + * + * FIXME: what is the range? + */ + s16 threshold; + + /* + * Minimum delay between two trigger events for this trigger in ms. + * + * Range: 0 - 60000 + */ + u16 pacing; + + /* + * The measurement data source for this trigger. + * + * Range: CONF_TRIG_METRIC_* + */ + u8 metric; + + /* + * The trigger type of this trigger. + * + * Range: CONF_TRIG_EVENT_TYPE_* + */ + u8 type; + + /* + * The direction of the trigger. + * + * Range: CONF_TRIG_EVENT_DIR_* + */ + u8 direction; + + /* + * Hysteresis range of the trigger around the threshold (in dB) + * + * Range: u8 + */ + u8 hysteresis; + + /* + * Index of the trigger rule. + * + * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1 + */ + u8 index; + + /* + * Enable / disable this rule (to use for clearing rules.) + * + * Range: 1 - Enabled, 2 - Not enabled + */ + u8 enable; +}; + +struct conf_sig_weights { + + /* + * RSSI from beacons average weight. + * + * Range: u8 + */ + u8 rssi_bcn_avg_weight; + + /* + * RSSI from data average weight. + * + * Range: u8 + */ + u8 rssi_pkt_avg_weight; + + /* + * SNR from beacons average weight. + * + * Range: u8 + */ + u8 snr_bcn_avg_weight; + + /* + * SNR from data average weight. + * + * Range: u8 + */ + u8 snr_pkt_avg_weight; +}; + +enum conf_bcn_filt_mode { + CONF_BCN_FILT_MODE_DISABLED = 0, + CONF_BCN_FILT_MODE_ENABLED = 1 +}; + +struct conf_conn_settings { + /* + * Firmware wakeup conditions configuration. The host may set only + * one bit. + * + * Range: CONF_WAKE_UP_EVENT_* + */ + u8 wake_up_event; + + /* + * Listen interval for beacons or Dtims. + * + * Range: 0 for beacon and Dtim wakeup + * 1-10 for x Dtims + * 1-255 for x beacons + */ + u8 listen_interval; + + /* + * Enable or disable the beacon filtering. + * + * Range: CONF_BCN_FILT_MODE_* + */ + enum conf_bcn_filt_mode bcn_filt_mode; + + /* + * Configure Beacon filter pass-thru rules. + */ + u8 bcn_filt_ie_count; + struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; + + /* + * The number of consequtive beacons to lose, before the firmware + * becomes out of synch. + * + * Range: u32 + */ + u32 synch_fail_thold; + + /* + * After out-of-synch, the number of TU's to wait without a further + * received beacon (or probe response) before issuing the BSS_EVENT_LOSE + * event. + * + * Range: u32 + */ + u32 bss_lose_timeout; + + /* + * Beacon receive timeout. + * + * Range: u32 + */ + u32 beacon_rx_timeout; + + /* + * Broadcast receive timeout. + * + * Range: u32 + */ + u32 broadcast_timeout; + + /* + * Enable/disable reception of broadcast packets in power save mode + * + * Range: 1 - enable, 0 - disable + */ + u8 rx_broadcast_in_ps; + + /* + * Consequtive PS Poll failures before sending event to driver + * + * Range: u8 + */ + u8 ps_poll_threshold; + + /* + * Configuration of signal (rssi/snr) triggers. + */ + u8 sig_trigger_count; + struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS]; + + /* + * Configuration of signal average weights. + */ + struct conf_sig_weights sig_weights; +}; + struct conf_drv_settings { struct conf_sg_settings sg; struct conf_rx_settings rx; struct conf_tx_settings tx; + struct conf_conn_settings conn; }; #endif -- cgit v1.2.1 From 47fab7d589d46d87a5dbfd7f2ddd53deccfad504 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 13 Oct 2009 12:47:43 +0300 Subject: wl1271: Add config structure for FW init parameters Add a configuration structure for RX path parameters, and set default configuration values there. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 182 ++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index f08e509bd69f..5333a2731254 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -691,11 +691,193 @@ struct conf_conn_settings { struct conf_sig_weights sig_weights; }; +#define CONF_SR_ERR_TBL_MAX_VALUES 14 + +struct conf_mart_reflex_err_table { + /* + * Length of the error table values table. + * + * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES + */ + u8 len; + + /* + * Smart Reflex error table upper limit. + * + * Range: s8 + */ + s8 upper_limit; + + /* + * Smart Reflex error table values. + * + * Range: s8 + */ + s8 values[CONF_SR_ERR_TBL_MAX_VALUES]; +}; + +enum { + CONF_REF_CLK_19_2_E, + CONF_REF_CLK_26_E, + CONF_REF_CLK_38_4_E, + CONF_REF_CLK_52_E +}; + +struct conf_general_parms { + /* + * RF Reference Clock type / speed + * + * Range: CONF_REF_CLK_* + */ + u8 ref_clk; + + /* + * Settling time of the reference clock after boot. + * + * Range: u8 + */ + u8 settling_time; + + /* + * Flag defining whether clock is valid on wakeup. + * + * Range: 0 - not valid on wakeup, 1 - valid on wakeup + */ + u8 clk_valid_on_wakeup; + + /* + * DC-to-DC mode. + * + * Range: Unknown + */ + u8 dc2dcmode; + + /* + * Flag defining whether used as single or dual-band. + * + * Range: Unknown + */ + u8 single_dual_band; + + /* + * TX bip fem autodetect flag. + * + * Range: Unknown + */ + u8 tx_bip_fem_autodetect; + + /* + * TX bip gem manufacturer. + * + * Range: Unknown + */ + u8 tx_bip_fem_manufacturer; + + /* + * Settings flags. + * + * Range: Unknown + */ + u8 settings; +}; + +#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 +#define CONF_NUMBER_OF_SUB_BANDS_5 7 +#define CONF_NUMBER_OF_RATE_GROUPS 6 +#define CONF_NUMBER_OF_CHANNELS_2_4 14 +#define CONF_NUMBER_OF_CHANNELS_5 35 + +struct conf_radio_parms { + /* + * Static radio parameters for 2.4GHz + * + * Range: unknown + */ + u8 rx_trace_loss; + u8 tx_trace_loss; + s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE]; + + /* + * Static radio parameters for 5GHz + * + * Range: unknown + */ + u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; + u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; + s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE]; + + /* + * Dynamic radio parameters for 2.4GHz + * + * Range: unknown + */ + s16 tx_ref_pd_voltage; + s8 tx_ref_power; + s8 tx_offset_db; + + s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS]; + s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS]; + + s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4]; + s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4]; + s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS]; + + u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS]; + u8 rx_fem_insertion_loss; + + /* + * Dynamic radio parameters for 5GHz + * + * Range: unknown + */ + s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5]; + s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5]; + s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5]; + + s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS]; + s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS]; + + s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5]; + s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS]; + + /* FIXME: this is inconsistent with the types for 2.4GHz */ + s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS]; + s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; +}; + +#define CONF_SR_ERR_TBL_COUNT 3 + +struct conf_init_settings { + /* + * Configure Smart Reflex error table values. + */ + struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT]; + + /* + * Smart Reflex enable flag. + * + * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled + */ + u8 sr_enable; + + /* + * Configure general parameters. + */ + struct conf_general_parms genparam; + + /* + * Configure radio parameters. + */ + struct conf_radio_parms radioparam; + +}; + struct conf_drv_settings { struct conf_sg_settings sg; struct conf_rx_settings rx; struct conf_tx_settings tx; struct conf_conn_settings conn; + struct conf_init_settings init; }; #endif -- cgit v1.2.1 From 11f70f9715f0d8f99eac42d69689e8df15283fea Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 13 Oct 2009 12:47:46 +0300 Subject: wl1271: Implement beacon early termination support Add support to enable beacon early termination in the firmware. Early Beacon termination is a feature which allows the radio to be turned off after TIM IE to save power. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 5333a2731254..00ffa6679324 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -603,6 +603,11 @@ enum conf_bcn_filt_mode { CONF_BCN_FILT_MODE_ENABLED = 1 }; +enum conf_bet_mode { + CONF_BET_MODE_DISABLE = 0, + CONF_BET_MODE_ENABLE = 1, +}; + struct conf_conn_settings { /* * Firmware wakeup conditions configuration. The host may set only @@ -689,6 +694,24 @@ struct conf_conn_settings { * Configuration of signal average weights. */ struct conf_sig_weights sig_weights; + + /* + * Specifies if beacon early termination procedure is enabled or + * disabled. + * + * Range: CONF_BET_MODE_* + */ + u8 bet_enable; + + /* + * Specifies the maximum number of consecutive beacons that may be + * early terminated. After this number is reached at least one full + * beacon must be correctly received in FW before beacon ET + * resumes. + * + * Range 0 - 255 + */ + u8 bet_max_consecutive; }; #define CONF_SR_ERR_TBL_MAX_VALUES 14 -- cgit v1.2.1 From 1ebec3d750f2b5740e3c334dac06104d2f74a9b1 Mon Sep 17 00:00:00 2001 From: Teemu Paasikivi Date: Tue, 13 Oct 2009 12:47:48 +0300 Subject: wl1271: Added 5 GHz parameters for wl1273 Added data rate and frequency tables for 5 GHz band channels, 5 GHz radio configration parameters and configuration option to enable 802.11 support. Signed-off-by: Teemu Paasikivi Reviewed-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 00ffa6679324..061d47520a32 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -746,6 +746,11 @@ enum { CONF_REF_CLK_52_E }; +enum single_dual_band_enum { + CONF_SINGLE_BAND, + CONF_DUAL_BAND +}; + struct conf_general_parms { /* * RF Reference Clock type / speed @@ -778,7 +783,7 @@ struct conf_general_parms { /* * Flag defining whether used as single or dual-band. * - * Range: Unknown + * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND */ u8 single_dual_band; -- cgit v1.2.1 From 19ad0715d8d9acc259ef02f83df767df2cf1eafe Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Mon, 2 Nov 2009 20:22:11 +0200 Subject: wl1271: Add retry implementation for PSM entries PSM entries can fail (transmitting the corresponding null-func may not be heard by the AP.) Previously, this scenario was not detected, and out-of-sync between STA and AP could occur. Add retry implementation for the entries to recover from the situation. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_conf.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h') diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 061d47520a32..565373ede265 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -712,6 +712,14 @@ struct conf_conn_settings { * Range 0 - 255 */ u8 bet_max_consecutive; + + /* + * Specifies the maximum number of times to try PSM entry if it fails + * (if sending the appropriate null-func message fails.) + * + * Range 0 - 255 + */ + u8 psm_entry_retries; }; #define CONF_SR_ERR_TBL_MAX_VALUES 14 -- cgit v1.2.1