From eda50cde58de7368f982e3906090fc033ecb9360 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Wed, 28 Sep 2016 17:16:53 +0300 Subject: iwlwifi: pcie: add context information support Context information structure is going to be used in a000 devices for firmware self init. The self init includes firmware self loading from DRAM by ROM. This means the TFH relevant firmware loading can be cleaned up. The firmware loading includes the paging memory as well, so op mode can stop initializing the paging and sending the DRAM_BLOCK_CMD. Firmware is doing RFH, TFH and SCD configuration, while driver only fills the required configurations and addresses in the context information structure. The only remaining access to RFH is the write pointer, which is updated upon alive interrupt after FW configured the RFH. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-prph.h') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h index 3a8aeee3b55a..bb7e0d642981 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h @@ -309,6 +309,7 @@ * Note this address is cleared after MAC reset. */ #define UREG_UCODE_LOAD_STATUS (0xa05c40) +#define UREG_CPU_INIT_RUN (0xa05c44) #define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR (0x1E78) #define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR (0x1E7C) -- cgit v1.2.1