From fff1068559a2ae00a036b80c5df3c564fc6c6305 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 08:58:51 -0700 Subject: wimax/i2400m: don't call netif_start_queue() in _tx_msg_sent() Reported and fixed by Cindy H Kao. When the device is stopped __i2400m_dev_stop() stops the network queue. However, when this is done in the middle of heavy network operation, when the bus-specific subdriver is still wrapping up and it reports a sent TX transaction with _tx_msg_sent() right after the device was stopped, the queue was being started again, which was causing a stream of oopsen and finally a panic. In any case, said call has no place there. It's a left over from an early implementation that was discarded later on. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/tx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/wimax/i2400m/tx.c') diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c index 613a88ffd651..8ef724d31fbf 100644 --- a/drivers/net/wimax/i2400m/tx.c +++ b/drivers/net/wimax/i2400m/tx.c @@ -773,7 +773,6 @@ void i2400m_tx_msg_sent(struct i2400m *i2400m) n = i2400m->tx_out / I2400M_TX_BUF_SIZE; i2400m->tx_out %= I2400M_TX_BUF_SIZE; i2400m->tx_in -= n * I2400M_TX_BUF_SIZE; - netif_start_queue(i2400m->wimax_dev.net_dev); spin_unlock_irqrestore(&i2400m->tx_lock, flags); d_fnend(3, dev, "(i2400m %p) = void\n", i2400m); } -- cgit v1.2.1