From 2a2d1cf46500ab7599d0b45ee837f3936763ccac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Aug 2012 17:15:52 -0300 Subject: [media] move soc_camera i2c drivers into its own dir Move all soc_camera i2c drivers into drivers/media/i2c/soc_camera/. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/soc_camera/mt9t031.c | 857 +++++++++++++++++++++++++++++++++ 1 file changed, 857 insertions(+) create mode 100644 drivers/media/i2c/soc_camera/mt9t031.c (limited to 'drivers/media/i2c/soc_camera/mt9t031.c') diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c new file mode 100644 index 000000000000..1415074138a5 --- /dev/null +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -0,0 +1,857 @@ +/* + * Driver for MT9T031 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * ATTENTION: this driver still cannot be used outside of the soc-camera + * framework because of its PM implementation, using the video_device node. + * If hardware becomes available for testing, alternative PM approaches shall + * be considered and tested. + */ + +/* + * mt9t031 i2c address 0x5d + * The platform has to define i2c_board_info and link to it from + * struct soc_camera_link + */ + +/* mt9t031 selected register addresses */ +#define MT9T031_CHIP_VERSION 0x00 +#define MT9T031_ROW_START 0x01 +#define MT9T031_COLUMN_START 0x02 +#define MT9T031_WINDOW_HEIGHT 0x03 +#define MT9T031_WINDOW_WIDTH 0x04 +#define MT9T031_HORIZONTAL_BLANKING 0x05 +#define MT9T031_VERTICAL_BLANKING 0x06 +#define MT9T031_OUTPUT_CONTROL 0x07 +#define MT9T031_SHUTTER_WIDTH_UPPER 0x08 +#define MT9T031_SHUTTER_WIDTH 0x09 +#define MT9T031_PIXEL_CLOCK_CONTROL 0x0a +#define MT9T031_FRAME_RESTART 0x0b +#define MT9T031_SHUTTER_DELAY 0x0c +#define MT9T031_RESET 0x0d +#define MT9T031_READ_MODE_1 0x1e +#define MT9T031_READ_MODE_2 0x20 +#define MT9T031_READ_MODE_3 0x21 +#define MT9T031_ROW_ADDRESS_MODE 0x22 +#define MT9T031_COLUMN_ADDRESS_MODE 0x23 +#define MT9T031_GLOBAL_GAIN 0x35 +#define MT9T031_CHIP_ENABLE 0xF8 + +#define MT9T031_MAX_HEIGHT 1536 +#define MT9T031_MAX_WIDTH 2048 +#define MT9T031_MIN_HEIGHT 2 +#define MT9T031_MIN_WIDTH 18 +#define MT9T031_HORIZONTAL_BLANK 142 +#define MT9T031_VERTICAL_BLANK 25 +#define MT9T031_COLUMN_SKIP 32 +#define MT9T031_ROW_SKIP 20 + +struct mt9t031 { + struct v4l2_subdev subdev; + struct v4l2_ctrl_handler hdl; + struct { + /* exposure/auto-exposure cluster */ + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct v4l2_rect rect; /* Sensor window */ + int model; /* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */ + u16 xskip; + u16 yskip; + unsigned int total_h; + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +static struct mt9t031 *to_mt9t031(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9t031, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret | data); +} + +static int reg_clear(struct i2c_client *client, const u8 reg, + const u16 data) +{ + int ret; + + ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, ret & ~data); +} + +static int set_shutter(struct i2c_client *client, const u32 data) +{ + int ret; + + ret = reg_write(client, MT9T031_SHUTTER_WIDTH_UPPER, data >> 16); + + if (ret >= 0) + ret = reg_write(client, MT9T031_SHUTTER_WIDTH, data & 0xffff); + + return ret; +} + +static int get_shutter(struct i2c_client *client, u32 *data) +{ + int ret; + + ret = reg_read(client, MT9T031_SHUTTER_WIDTH_UPPER); + *data = ret << 16; + + if (ret >= 0) + ret = reg_read(client, MT9T031_SHUTTER_WIDTH); + *data |= ret & 0xffff; + + return ret < 0 ? ret : 0; +} + +static int mt9t031_idle(struct i2c_client *client) +{ + int ret; + + /* Disable chip output, synchronous option update */ + ret = reg_write(client, MT9T031_RESET, 1); + if (ret >= 0) + ret = reg_write(client, MT9T031_RESET, 0); + if (ret >= 0) + ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); + + return ret >= 0 ? 0 : -EIO; +} + +static int mt9t031_disable(struct i2c_client *client) +{ + /* Disable the chip */ + reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); + + return 0; +} + +static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (enable) + /* Switch to master "normal" mode */ + ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 2); + else + /* Stop sensor readout */ + ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); + + if (ret < 0) + return -EIO; + + return 0; +} + +/* target must be _even_ */ +static u16 mt9t031_skip(s32 *source, s32 target, s32 max) +{ + unsigned int skip; + + if (*source < target + target / 2) { + *source = target; + return 1; + } + + skip = min(max, *source + target / 2) / target; + if (skip > 8) + skip = 8; + *source = target * skip; + + return skip; +} + +/* rect is the sensor rectangle, the caller guarantees parameter validity */ +static int mt9t031_set_params(struct i2c_client *client, + struct v4l2_rect *rect, u16 xskip, u16 yskip) +{ + struct mt9t031 *mt9t031 = to_mt9t031(client); + int ret; + u16 xbin, ybin; + const u16 hblank = MT9T031_HORIZONTAL_BLANK, + vblank = MT9T031_VERTICAL_BLANK; + + xbin = min(xskip, (u16)3); + ybin = min(yskip, (u16)3); + + /* + * Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper. + * There is always a valid suitably aligned value. The worst case is + * xbin = 3, width = 2048. Then we will start at 36, the last read out + * pixel will be 2083, which is < 2085 - first black pixel. + * + * MT9T031 datasheet imposes window left border alignment, depending on + * the selected xskip. Failing to conform to this requirement produces + * dark horizontal stripes in the image. However, even obeying to this + * requirement doesn't eliminate the stripes in all configurations. They + * appear "locally reproducibly," but can differ between tests under + * different lighting conditions. + */ + switch (xbin) { + case 1: + rect->left &= ~1; + break; + case 2: + rect->left &= ~3; + break; + case 3: + rect->left = rect->left > roundup(MT9T031_COLUMN_SKIP, 6) ? + (rect->left / 6) * 6 : roundup(MT9T031_COLUMN_SKIP, 6); + } + + rect->top &= ~1; + + dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n", + xskip, yskip, rect->width, rect->height, rect->left, rect->top); + + /* Disable register update, reconfigure atomically */ + ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1); + if (ret < 0) + return ret; + + /* Blanking and start values - default... */ + ret = reg_write(client, MT9T031_HORIZONTAL_BLANKING, hblank); + if (ret >= 0) + ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank); + + if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) { + /* Binning, skipping */ + if (ret >= 0) + ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (xskip - 1)); + if (ret >= 0) + ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (yskip - 1)); + } + dev_dbg(&client->dev, "new physical left %u, top %u\n", + rect->left, rect->top); + + /* + * The caller provides a supported format, as guaranteed by + * .try_mbus_fmt(), soc_camera_s_crop() and soc_camera_cropcap() + */ + if (ret >= 0) + ret = reg_write(client, MT9T031_COLUMN_START, rect->left); + if (ret >= 0) + ret = reg_write(client, MT9T031_ROW_START, rect->top); + if (ret >= 0) + ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect->width - 1); + if (ret >= 0) + ret = reg_write(client, MT9T031_WINDOW_HEIGHT, + rect->height + mt9t031->y_skip_top - 1); + if (ret >= 0 && v4l2_ctrl_g_ctrl(mt9t031->autoexposure) == V4L2_EXPOSURE_AUTO) { + mt9t031->total_h = rect->height + mt9t031->y_skip_top + vblank; + + ret = set_shutter(client, mt9t031->total_h); + } + + /* Re-enable register update, commit all changes */ + if (ret >= 0) + ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1); + + if (ret >= 0) { + mt9t031->rect = *rect; + mt9t031->xskip = xskip; + mt9t031->yskip = yskip; + } + + return ret < 0 ? ret : 0; +} + +static int mt9t031_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + rect.width = ALIGN(rect.width, 2); + rect.height = ALIGN(rect.height, 2); + + soc_camera_limit_side(&rect.left, &rect.width, + MT9T031_COLUMN_SKIP, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH); + + soc_camera_limit_side(&rect.top, &rect.height, + MT9T031_ROW_SKIP, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT); + + return mt9t031_set_params(client, &rect, mt9t031->xskip, mt9t031->yskip); +} + +static int mt9t031_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + a->c = mt9t031->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int mt9t031_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = MT9T031_COLUMN_SKIP; + a->bounds.top = MT9T031_ROW_SKIP; + a->bounds.width = MT9T031_MAX_WIDTH; + a->bounds.height = MT9T031_MAX_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int mt9t031_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + mf->width = mt9t031->rect.width / mt9t031->xskip; + mf->height = mt9t031->rect.height / mt9t031->yskip; + mf->code = V4L2_MBUS_FMT_SBGGR10_1X10; + mf->colorspace = V4L2_COLORSPACE_SRGB; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9t031_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + u16 xskip, yskip; + struct v4l2_rect rect = mt9t031->rect; + + /* + * try_fmt has put width and height within limits. + * S_FMT: use binning and skipping for scaling + */ + xskip = mt9t031_skip(&rect.width, mf->width, MT9T031_MAX_WIDTH); + yskip = mt9t031_skip(&rect.height, mf->height, MT9T031_MAX_HEIGHT); + + mf->code = V4L2_MBUS_FMT_SBGGR10_1X10; + mf->colorspace = V4L2_COLORSPACE_SRGB; + + /* mt9t031_set_params() doesn't change width and height */ + return mt9t031_set_params(client, &rect, xskip, yskip); +} + +/* + * If a user window larger than sensor window is requested, we'll increase the + * sensor window. + */ +static int mt9t031_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + v4l_bound_align_image( + &mf->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1, + &mf->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0); + + mf->code = V4L2_MBUS_FMT_SBGGR10_1X10; + mf->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int mt9t031_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = mt9t031->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9t031_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9t031_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int mt9t031_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9t031 *mt9t031 = container_of(ctrl->handler, + struct mt9t031, hdl); + const u32 shutter_max = MT9T031_MAX_HEIGHT + MT9T031_VERTICAL_BLANK; + s32 min, max; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE_AUTO: + min = mt9t031->exposure->minimum; + max = mt9t031->exposure->maximum; + mt9t031->exposure->val = + (shutter_max / 2 + (mt9t031->total_h - 1) * (max - min)) + / shutter_max + min; + break; + } + return 0; +} + +static int mt9t031_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9t031 *mt9t031 = container_of(ctrl->handler, + struct mt9t031, hdl); + struct v4l2_subdev *sd = &mt9t031->subdev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct v4l2_ctrl *exp = mt9t031->exposure; + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (ctrl->val) + data = reg_set(client, MT9T031_READ_MODE_2, 0x8000); + else + data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_HFLIP: + if (ctrl->val) + data = reg_set(client, MT9T031_READ_MODE_2, 0x4000); + else + data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000); + if (data < 0) + return -EIO; + return 0; + case V4L2_CID_GAIN: + /* See Datasheet Table 7, Gain settings. */ + if (ctrl->val <= ctrl->default_value) { + /* Pack it into 0..1 step 0.125, register values 0..8 */ + unsigned long range = ctrl->default_value - ctrl->minimum; + data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range; + + dev_dbg(&client->dev, "Setting gain %d\n", data); + data = reg_write(client, MT9T031_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } else { + /* Pack it into 1.125..128 variable step, register values 9..0x7860 */ + /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ + unsigned long range = ctrl->maximum - ctrl->default_value - 1; + /* calculated gain: map 65..127 to 9..1024 step 0.125 */ + unsigned long gain = ((ctrl->val - ctrl->default_value - 1) * + 1015 + range / 2) / range + 9; + + if (gain <= 32) /* calculated gain 9..32 -> 9..32 */ + data = gain; + else if (gain <= 64) /* calculated gain 33..64 -> 0x51..0x60 */ + data = ((gain - 32) * 16 + 16) / 32 + 80; + else + /* calculated gain 65..1024 -> (1..120) << 8 + 0x60 */ + data = (((gain - 64 + 7) * 32) & 0xff00) | 0x60; + + dev_dbg(&client->dev, "Set gain from 0x%x to 0x%x\n", + reg_read(client, MT9T031_GLOBAL_GAIN), data); + data = reg_write(client, MT9T031_GLOBAL_GAIN, data); + if (data < 0) + return -EIO; + } + return 0; + + case V4L2_CID_EXPOSURE_AUTO: + if (ctrl->val == V4L2_EXPOSURE_MANUAL) { + unsigned int range = exp->maximum - exp->minimum; + unsigned int shutter = ((exp->val - exp->minimum) * 1048 + + range / 2) / range + 1; + u32 old; + + get_shutter(client, &old); + dev_dbg(&client->dev, "Set shutter from %u to %u\n", + old, shutter); + if (set_shutter(client, shutter) < 0) + return -EIO; + } else { + const u16 vblank = MT9T031_VERTICAL_BLANK; + mt9t031->total_h = mt9t031->rect.height + + mt9t031->y_skip_top + vblank; + + if (set_shutter(client, mt9t031->total_h) < 0) + return -EIO; + } + return 0; + default: + return -EINVAL; + } + return 0; +} + +/* + * Power Management: + * This function does nothing for now but must be present for pm to work + */ +static int mt9t031_runtime_suspend(struct device *dev) +{ + return 0; +} + +/* + * Power Management: + * COLUMN_ADDRESS_MODE and ROW_ADDRESS_MODE are not rewritten if unchanged + * they are however changed at reset if the platform hook is present + * thus we rewrite them with the values stored by the driver + */ +static int mt9t031_runtime_resume(struct device *dev) +{ + struct video_device *vdev = to_video_device(dev); + struct v4l2_subdev *sd = soc_camera_vdev_to_subdev(vdev); + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + int ret; + u16 xbin, ybin; + + xbin = min(mt9t031->xskip, (u16)3); + ybin = min(mt9t031->yskip, (u16)3); + + ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (mt9t031->xskip - 1)); + if (ret < 0) + return ret; + + ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (mt9t031->yskip - 1)); + if (ret < 0) + return ret; + + return 0; +} + +static struct dev_pm_ops mt9t031_dev_pm_ops = { + .runtime_suspend = mt9t031_runtime_suspend, + .runtime_resume = mt9t031_runtime_resume, +}; + +static struct device_type mt9t031_dev_type = { + .name = "MT9T031", + .pm = &mt9t031_dev_pm_ops, +}; + +static int mt9t031_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct video_device *vdev = soc_camera_i2c_to_vdev(client); + + if (on) + vdev->dev.type = &mt9t031_dev_type; + else + vdev->dev.type = NULL; + + return 0; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9t031_video_probe(struct i2c_client *client) +{ + struct mt9t031 *mt9t031 = to_mt9t031(client); + s32 data; + int ret; + + /* Enable the chip */ + data = reg_write(client, MT9T031_CHIP_ENABLE, 1); + dev_dbg(&client->dev, "write: %d\n", data); + + /* Read out the chip version register */ + data = reg_read(client, MT9T031_CHIP_VERSION); + + switch (data) { + case 0x1621: + mt9t031->model = V4L2_IDENT_MT9T031; + break; + default: + dev_err(&client->dev, + "No MT9T031 chip detected, register read %x\n", data); + return -ENODEV; + } + + dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data); + + ret = mt9t031_idle(client); + if (ret < 0) + dev_err(&client->dev, "Failed to initialise the camera\n"); + else + v4l2_ctrl_handler_setup(&mt9t031->hdl); + + return ret; +} + +static int mt9t031_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct mt9t031 *mt9t031 = to_mt9t031(client); + + *lines = mt9t031->y_skip_top; + + return 0; +} + +static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = { + .g_volatile_ctrl = mt9t031_g_volatile_ctrl, + .s_ctrl = mt9t031_s_ctrl, +}; + +static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = { + .g_chip_ident = mt9t031_g_chip_ident, + .s_power = mt9t031_s_power, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9t031_g_register, + .s_register = mt9t031_s_register, +#endif +}; + +static int mt9t031_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_SBGGR10_1X10; + return 0; +} + +static int mt9t031_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_PARALLEL; + cfg->flags = soc_camera_apply_board_flags(icl, cfg); + + return 0; +} + +static int mt9t031_s_mbus_config(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + + if (soc_camera_apply_board_flags(icl, cfg) & + V4L2_MBUS_PCLK_SAMPLE_FALLING) + return reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000); + else + return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000); +} + +static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { + .s_stream = mt9t031_s_stream, + .s_mbus_fmt = mt9t031_s_fmt, + .g_mbus_fmt = mt9t031_g_fmt, + .try_mbus_fmt = mt9t031_try_fmt, + .s_crop = mt9t031_s_crop, + .g_crop = mt9t031_g_crop, + .cropcap = mt9t031_cropcap, + .enum_mbus_fmt = mt9t031_enum_fmt, + .g_mbus_config = mt9t031_g_mbus_config, + .s_mbus_config = mt9t031_s_mbus_config, +}; + +static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = { + .g_skip_top_lines = mt9t031_g_skip_top_lines, +}; + +static struct v4l2_subdev_ops mt9t031_subdev_ops = { + .core = &mt9t031_subdev_core_ops, + .video = &mt9t031_subdev_video_ops, + .sensor = &mt9t031_subdev_sensor_ops, +}; + +static int mt9t031_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9t031 *mt9t031; + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + int ret; + + if (!icl) { + dev_err(&client->dev, "MT9T031 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9t031 = kzalloc(sizeof(struct mt9t031), GFP_KERNEL); + if (!mt9t031) + return -ENOMEM; + + v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops); + v4l2_ctrl_handler_init(&mt9t031->hdl, 5); + v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + /* + * Simulated autoexposure. If enabled, we calculate shutter width + * ourselves in the driver based on vertical blanking and frame width + */ + mt9t031->autoexposure = v4l2_ctrl_new_std_menu(&mt9t031->hdl, + &mt9t031_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, + V4L2_EXPOSURE_AUTO); + mt9t031->exposure = v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 255, 1, 255); + + mt9t031->subdev.ctrl_handler = &mt9t031->hdl; + if (mt9t031->hdl.error) { + int err = mt9t031->hdl.error; + + kfree(mt9t031); + return err; + } + v4l2_ctrl_auto_cluster(2, &mt9t031->autoexposure, + V4L2_EXPOSURE_MANUAL, true); + + mt9t031->y_skip_top = 0; + mt9t031->rect.left = MT9T031_COLUMN_SKIP; + mt9t031->rect.top = MT9T031_ROW_SKIP; + mt9t031->rect.width = MT9T031_MAX_WIDTH; + mt9t031->rect.height = MT9T031_MAX_HEIGHT; + + mt9t031->xskip = 1; + mt9t031->yskip = 1; + + mt9t031_idle(client); + + ret = mt9t031_video_probe(client); + + mt9t031_disable(client); + + if (ret) { + v4l2_ctrl_handler_free(&mt9t031->hdl); + kfree(mt9t031); + } + + return ret; +} + +static int mt9t031_remove(struct i2c_client *client) +{ + struct mt9t031 *mt9t031 = to_mt9t031(client); + + v4l2_device_unregister_subdev(&mt9t031->subdev); + v4l2_ctrl_handler_free(&mt9t031->hdl); + kfree(mt9t031); + + return 0; +} + +static const struct i2c_device_id mt9t031_id[] = { + { "mt9t031", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9t031_id); + +static struct i2c_driver mt9t031_i2c_driver = { + .driver = { + .name = "mt9t031", + }, + .probe = mt9t031_probe, + .remove = mt9t031_remove, + .id_table = mt9t031_id, +}; + +module_i2c_driver(mt9t031_i2c_driver); + +MODULE_DESCRIPTION("Micron MT9T031 Camera driver"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.1 From 4ec10bacd6bf08de39ebdba9e75060452cc313e0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 20 Jul 2012 10:19:50 -0300 Subject: [media] soc-camera: Add and use soc_camera_power_[on|off]() helper functions Instead of forcing all soc-camera drivers to go through the mid-layer to handle power management, create soc_camera_power_[on|off]() functions that can be called from the subdev .s_power() operation to manage regulators and platform-specific power handling. This allows non soc-camera hosts to use soc-camera-aware clients. Signed-off-by: Laurent Pinchart [g.liakhovetski@gmx.de: fix compile breakage] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/soc_camera/mt9t031.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/media/i2c/soc_camera/mt9t031.c') diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c index 1415074138a5..9666e202e395 100644 --- a/drivers/media/i2c/soc_camera/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -616,12 +616,19 @@ static struct device_type mt9t031_dev_type = { static int mt9t031_s_power(struct v4l2_subdev *sd, int on) { struct i2c_client *client = v4l2_get_subdevdata(sd); + struct soc_camera_link *icl = soc_camera_i2c_to_link(client); struct video_device *vdev = soc_camera_i2c_to_vdev(client); + int ret; - if (on) + if (on) { + ret = soc_camera_power_on(&client->dev, icl); + if (ret < 0) + return ret; vdev->dev.type = &mt9t031_dev_type; - else + } else { vdev->dev.type = NULL; + soc_camera_power_off(&client->dev, icl); + } return 0; } -- cgit v1.2.1 From 4bbc6d52e61a8a9c19fcc859c4acab89cb8cd4e5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 18 Jul 2012 10:54:04 -0300 Subject: [media] soc-camera: Push probe-time power management to drivers Several client drivers access the hardware at probe time, for instance to read the probe chip ID. Such chips need to be powered up when being probed. soc-camera handles this by powering chips up in the soc-camera probe implementation. However, this will break with non soc-camera hosts that don't perform the same operations. Fix the problem by pushing the power up/down from the soc-camera core down to individual drivers on a needs basis. Signed-off-by: Laurent Pinchart Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/soc_camera/mt9t031.c | 37 ++++++++++++++-------------------- 1 file changed, 15 insertions(+), 22 deletions(-) (limited to 'drivers/media/i2c/soc_camera/mt9t031.c') diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c index 9666e202e395..d74607adc585 100644 --- a/drivers/media/i2c/soc_camera/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -161,14 +161,6 @@ static int mt9t031_idle(struct i2c_client *client) return ret >= 0 ? 0 : -EIO; } -static int mt9t031_disable(struct i2c_client *client) -{ - /* Disable the chip */ - reg_clear(client, MT9T031_OUTPUT_CONTROL, 2); - - return 0; -} - static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -643,9 +635,15 @@ static int mt9t031_video_probe(struct i2c_client *client) s32 data; int ret; - /* Enable the chip */ - data = reg_write(client, MT9T031_CHIP_ENABLE, 1); - dev_dbg(&client->dev, "write: %d\n", data); + ret = mt9t031_s_power(&mt9t031->subdev, 1); + if (ret < 0) + return ret; + + ret = mt9t031_idle(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to initialise the camera\n"); + goto done; + } /* Read out the chip version register */ data = reg_read(client, MT9T031_CHIP_VERSION); @@ -657,16 +655,16 @@ static int mt9t031_video_probe(struct i2c_client *client) default: dev_err(&client->dev, "No MT9T031 chip detected, register read %x\n", data); - return -ENODEV; + ret = -ENODEV; + goto done; } dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data); - ret = mt9t031_idle(client); - if (ret < 0) - dev_err(&client->dev, "Failed to initialise the camera\n"); - else - v4l2_ctrl_handler_setup(&mt9t031->hdl); + ret = v4l2_ctrl_handler_setup(&mt9t031->hdl); + +done: + mt9t031_s_power(&mt9t031->subdev, 0); return ret; } @@ -817,12 +815,7 @@ static int mt9t031_probe(struct i2c_client *client, mt9t031->xskip = 1; mt9t031->yskip = 1; - mt9t031_idle(client); - ret = mt9t031_video_probe(client); - - mt9t031_disable(client); - if (ret) { v4l2_ctrl_handler_free(&mt9t031->hdl); kfree(mt9t031); -- cgit v1.2.1 From 4f996594ceaf6c3f9bc42b40c40b0f7f87b79c86 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Sep 2012 05:10:48 -0300 Subject: [media] v4l2: make vidioc_s_crop const Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/soc_camera/mt9t031.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/media/i2c/soc_camera/mt9t031.c') diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c index d74607adc585..40800b10a080 100644 --- a/drivers/media/i2c/soc_camera/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -294,7 +294,7 @@ static int mt9t031_set_params(struct i2c_client *client, return ret < 0 ? ret : 0; } -static int mt9t031_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +static int mt9t031_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) { struct v4l2_rect rect = a->c; struct i2c_client *client = v4l2_get_subdevdata(sd); -- cgit v1.2.1