From 39baf8a798926eb675c9360d5822ca86ed92866e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 17 Feb 2007 02:40:20 +0100 Subject: atiixp/jmicron/triflex: fix PIO fallback * atiixp: if DMA can't be used atiixp_config_drive_for_dma() should return 0, atiixp_dma_check() will tune the correct PIO mode anyway * jmicron: if DMA can't be used config_chipset_for_dma() should return 0, micron_config_drive_for_dma() will tune the correct PIO mode anyway config_jmicron_chipset_for_pio(drive, !speed) doesn't program device transfer mode for speed != 0 (only wastes some CPU cycles on ide_get_best_pio_mode() call) so remove it * triflex: if DMA can't be used triflex_config_drive_for_dma() should return 0, triflex_config_drive_xfer_rate() will tune correct PIO mode anyway Above changes also fix (theoretical) issue when ->speedproc fails to set device transfer mode (i.e. when ide_config_drive_speed() fails to program it) but one of DMA transfer modes is already enabled on the device by the BIOS. In such scenario ide_dma_enable() will incorrectly return true statement and ->ide_dma_check will try to enable DMA on the device. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/atiixp.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/ide/pci/atiixp.c') diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 982ac31fa995..922b315da4a0 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -235,11 +235,8 @@ static int atiixp_config_drive_for_dma(ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive)); - /* If no DMA speed was available then disable DMA and use PIO. */ - if (!speed) { - u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); - speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0; - } + if (!speed) + return 0; (void) atiixp_speedproc(drive, speed); return ide_dma_enable(drive); -- cgit v1.2.1