From 6029336426a2b43e4bc6f4a84be8789a047d139e Mon Sep 17 00:00:00 2001 From: Joao Ramos Date: Sun, 17 May 2009 17:22:54 +0200 Subject: ide: try to use PIO Mode 0 during probe if possible Initially set PIO Mode 0 for all host drivers that have a 'set_pio_mode' method before the IDE core figures out the most suited PIO mode for the attached device. Signed-off-by: Joao Ramos Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 7f264ed1141b..b609a581df44 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1032,6 +1032,15 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); } + + ide_port_for_each_dev(i, drive, hwif) { + /* + * default to PIO Mode 0 before we figure out + * the most suited mode for the attached device + */ + if (port_ops && port_ops->set_pio_mode) + port_ops->set_pio_mode(drive, 0); + } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, -- cgit v1.2.1 From ca1b96e00ab5d1b0838965834469a0284c81a517 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:21 +0200 Subject: ide: replace special_t typedef by IDE_SFLAG_* flags Replace: - special_t typedef by IDE_SFLAG_* flags - 'special_t special' ide_drive_t's field by 'u8 special_flags' one There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index b609a581df44..727a67109ff0 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -97,7 +97,7 @@ static void ide_disk_init_mult_count(ide_drive_t *drive) drive->mult_req = id[ATA_ID_MULTSECT] & 0xff; if (drive->mult_req) - drive->special.b.set_multmode = 1; + drive->special_flags |= IDE_SFLAG_SET_MULTMODE; } } @@ -1138,8 +1138,8 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) drive->hwif = hwif; drive->ready_stat = ATA_DRDY; drive->bad_wstat = BAD_W_STAT; - drive->special.b.recalibrate = 1; - drive->special.b.set_geometry = 1; + drive->special_flags = IDE_SFLAG_RECALIBRATE | + IDE_SFLAG_SET_GEOMETRY; drive->name[0] = 'h'; drive->name[1] = 'd'; drive->name[2] = 'a' + j; -- cgit v1.2.1 From 29e52cf793ded6bece50de50e738596f94f07d9f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:22 +0200 Subject: ide: remove chipset field from hw_regs_t * Convert host drivers that still use hw_regs_t's chipset field to use the one in struct ide_port_info instead. * Move special handling of ide_pci chipset type from ide_hw_configure() to ide_init_port(). * Remove chipset field from hw_regs_t. While at it: - remove stale comment in delkin_cb.c There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 727a67109ff0..f17ba1932ad6 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1048,8 +1048,7 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, { hwif->channel = port; - if (d->chipset) - hwif->chipset = d->chipset; + hwif->chipset = d->chipset ? d->chipset : ide_pci; if (d->init_iops) d->init_iops(hwif); @@ -1178,7 +1177,6 @@ static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) { memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; - hwif->chipset = hw->chipset; hwif->dev = hw->dev; hwif->gendev.parent = hw->parent ? hw->parent : hw->dev; hwif->ack_intr = hw->ack_intr; -- cgit v1.2.1 From dca3983059a4481e4ae97bbf0ac4b4c21429e1a5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:24 +0200 Subject: ide: pass number of ports to ide_host_{alloc,add}() (v2) Pass number of ports to ide_host_{alloc,add}() and then update all users accordingly. v2: - drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c (noticed by Sergei) There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index f17ba1932ad6..6c7451a6e609 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1261,7 +1261,8 @@ out_nomem: return -ENOMEM; } -struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) +struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws, + unsigned int n_ports) { struct ide_host *host; struct device *dev = hws[0] ? hws[0]->dev : NULL; @@ -1272,7 +1273,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) if (host == NULL) return NULL; - for (i = 0; i < MAX_HOST_PORTS; i++) { + for (i = 0; i < n_ports; i++) { ide_hwif_t *hwif; int idx; @@ -1443,12 +1444,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, EXPORT_SYMBOL_GPL(ide_host_register); int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws, - struct ide_host **hostp) + unsigned int n_ports, struct ide_host **hostp) { struct ide_host *host; int rc; - host = ide_host_alloc(d, hws); + host = ide_host_alloc(d, hws, n_ports); if (host == NULL) return -ENOMEM; -- cgit v1.2.1 From 9f36d31437922354d104a2db407f397e79e4027e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:25 +0200 Subject: ide: remove hw_regs_t typedef Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 6c7451a6e609..29363829a3fe 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1173,7 +1173,7 @@ static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) ide_port_init_devices_data(hwif); } -static void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) +static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw) { memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; @@ -1261,8 +1261,8 @@ out_nomem: return -ENOMEM; } -struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws, - unsigned int n_ports) +struct ide_host *ide_host_alloc(const struct ide_port_info *d, + struct ide_hw **hws, unsigned int n_ports) { struct ide_host *host; struct device *dev = hws[0] ? hws[0]->dev : NULL; @@ -1349,7 +1349,7 @@ static void ide_disable_port(ide_hwif_t *hwif) } int ide_host_register(struct ide_host *host, const struct ide_port_info *d, - hw_regs_t **hws) + struct ide_hw **hws) { ide_hwif_t *hwif, *mate = NULL; int i, j = 0; @@ -1443,7 +1443,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, } EXPORT_SYMBOL_GPL(ide_host_register); -int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws, +int ide_host_add(const struct ide_port_info *d, struct ide_hw **hws, unsigned int n_ports, struct ide_host **hostp) { struct ide_host *host; -- cgit v1.2.1 From 8bc1e5aa06a2a9a425c4a6795fc564cba1521487 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 15:37:09 +0200 Subject: ide: respect quirk_drives[] list on all controllers * Add ide_check_nien_quirk_list() helper to the core code and then use it in ide_port_tune_devices(). * Remove no longer needed ->quirkproc methods from hpt366.c and pdc202xx_{new,old}.c. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 89574b0bd56d..28f95cb41c29 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -732,6 +732,8 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) int i; ide_port_for_each_present_dev(i, drive, hwif) { + ide_check_nien_quirk_list(drive); + if (port_ops && port_ops->quirkproc) port_ops->quirkproc(drive); } -- cgit v1.2.1 From a20b2a44eca52818ef52a94959480b7e6ea2f528 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 8 Jun 2009 22:07:28 +0200 Subject: ide: skip probe if there are no devices on the port (v2) In ide_probe_port() skip probe if ide_port_wait_ready() returns -ENODEV and print error message instead of debug one if it returns -EBUSY. v2: Fix the default 'rc' value. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 28f95cb41c29..f9c2fb7d0005 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -702,8 +702,14 @@ static int ide_probe_port(ide_hwif_t *hwif) if (irqd) disable_irq(hwif->irq); - if (ide_port_wait_ready(hwif) == -EBUSY) - printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); + rc = ide_port_wait_ready(hwif); + if (rc == -ENODEV) { + printk(KERN_INFO "%s: no devices on the port\n", hwif->name); + goto out; + } else if (rc == -EBUSY) + printk(KERN_ERR "%s: not ready before the probe\n", hwif->name); + else + rc = -ENODEV; /* * Second drive should only exist if first drive was found, @@ -714,7 +720,7 @@ static int ide_probe_port(ide_hwif_t *hwif) if (drive->dev_flags & IDE_DFLAG_PRESENT) rc = 0; } - +out: /* * Use cached IRQ number. It might be (and is...) changed by probe * code above -- cgit v1.2.1 From 5f4417a156a6e44359effa9492de3ed5638a9b13 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 10 Jun 2009 14:37:20 +0200 Subject: ide: fix PowerMac bootup oops PowerMac bootup with CONFIG_IDE=y oopses in ide_pio_cycle_time(): because "ide: try to use PIO Mode 0 during probe if possible" causes pmac_ide_set_pio_mode() to be called before drive->id has been set. Bart points out other places which now need drive->id set earlier, so follow his advice to allocate it in ide_port_alloc_devices() (using kzalloc_node, without error message, as when allocating drive) and memset it for reuse in ide_port_init_devices_data(). Fixed in passing: ide_host_alloc() was missing ide_port_free_devices() from an error path. Signed-off-by: Hugh Dickins Cc: Joao Ramos Cc: Sergei Shtylyov Cc: Benjamin Herrenschmidt Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 47 +++++++++++++++++++++-------------------------- 1 file changed, 21 insertions(+), 26 deletions(-) (limited to 'drivers/ide/ide-probe.c') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index f9c2fb7d0005..f371b0de314f 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -465,23 +465,8 @@ static u8 probe_for_drive(ide_drive_t *drive) int rc; u8 cmd; - /* - * In order to keep things simple we have an id - * block for all drives at all times. If the device - * is pre ATA or refuses ATA/ATAPI identify we - * will add faked data to this. - * - * Also note that 0 everywhere means "can't do X" - */ - drive->dev_flags &= ~IDE_DFLAG_ID_READ; - drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL); - if (drive->id == NULL) { - printk(KERN_ERR "ide: out of memory for id data.\n"); - return 0; - } - m = (char *)&drive->id[ATA_ID_PROD]; strcpy(m, "UNKNOWN"); @@ -497,7 +482,7 @@ static u8 probe_for_drive(ide_drive_t *drive) } if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - goto out_free; + return 0; /* identification failed? */ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { @@ -521,7 +506,7 @@ static u8 probe_for_drive(ide_drive_t *drive) } if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - goto out_free; + return 0; /* The drive wasn't being helpful. Add generic info only */ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { @@ -535,9 +520,6 @@ static u8 probe_for_drive(ide_drive_t *drive) } return 1; -out_free: - kfree(drive->id); - return 0; } static void hwif_release_dev(struct device *dev) @@ -825,8 +807,6 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) if (ide_init_queue(drive)) { printk(KERN_ERR "ide: failed to init %s\n", drive->name); - kfree(drive->id); - drive->id = NULL; drive->dev_flags &= ~IDE_DFLAG_PRESENT; continue; } @@ -955,9 +935,6 @@ static void drive_release_dev (struct device *dev) blk_cleanup_queue(drive->queue); drive->queue = NULL; - kfree(drive->id); - drive->id = NULL; - drive->dev_flags &= ~IDE_DFLAG_PRESENT; complete(&drive->gendev_rel_comp); @@ -1140,8 +1117,11 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) ide_port_for_each_dev(i, drive, hwif) { u8 j = (hwif->index * MAX_DRIVES) + i; + u16 *saved_id = drive->id; memset(drive, 0, sizeof(*drive)); + memset(saved_id, 0, SECTOR_SIZE); + drive->id = saved_id; drive->media = ide_disk; drive->select = (i << 4) | ATA_DEVICE_OBS; @@ -1248,8 +1228,10 @@ static void ide_port_free_devices(ide_hwif_t *hwif) ide_drive_t *drive; int i; - ide_port_for_each_dev(i, drive, hwif) + ide_port_for_each_dev(i, drive, hwif) { + kfree(drive->id); kfree(drive); + } } static int ide_port_alloc_devices(ide_hwif_t *hwif, int node) @@ -1263,6 +1245,18 @@ static int ide_port_alloc_devices(ide_hwif_t *hwif, int node) if (drive == NULL) goto out_nomem; + /* + * In order to keep things simple we have an id + * block for all drives at all times. If the device + * is pre ATA or refuses ATA/ATAPI identify we + * will add faked data to this. + * + * Also note that 0 everywhere means "can't do X" + */ + drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node); + if (drive->id == NULL) + goto out_nomem; + hwif->devices[i] = drive; } return 0; @@ -1304,6 +1298,7 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, if (idx < 0) { printk(KERN_ERR "%s: no free slot for interface\n", d ? d->name : "ide"); + ide_port_free_devices(hwif); kfree(hwif); continue; } -- cgit v1.2.1