From fc0012ec533def054e1ac57d54ed781fc0ab6b71 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Thu, 12 Sep 2013 23:01:29 +0200 Subject: pata_isapnp: Don't use invalid I/O ports The test for 2nd I/O port validity is broken (reversed): On devices with no control port, the driver attempts to use invalid port 0, resulting in logs full of bad_io_access errors. On devices with control port, the driver does not use it. Signed-off-by: Ondrej Zary Signed-off-by: Tejun Heo --- drivers/ata/pata_isapnp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 4bceb8803a10..b33d1f99b3a4 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -78,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap->ioaddr.cmd_addr = cmd_addr; - if (pnp_port_valid(idev, 1) == 0) { + if (pnp_port_valid(idev, 1)) { ctl_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; -- cgit v1.2.3 From d2782d96f3d85e85742364b85db63763918a4e1c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sat, 5 Oct 2013 09:15:16 +0900 Subject: ahci: use dev_info() instead of printk() Change "raw" printk() call to dev_info() to provide a better message to userspace so it can properly identify the device and not just have to guess. Signed-off-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 9d715ae5ff6b..8e28f923cf7f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1343,7 +1343,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else - printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); -- cgit v1.2.3 From 0fed4c09dca6820adaee28e55cd4283e74d029cd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sat, 5 Oct 2013 09:15:59 +0900 Subject: ahci_platform: use dev_info() instead of printk() Change "raw" printk() call to dev_info() to provide a better message to userspace so it can properly identify the device and not just have to guess. Signed-off-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/ahci_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 2daaee05cab1..7d3b85385bfc 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -184,7 +184,7 @@ static int ahci_probe(struct platform_device *pdev) if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else - printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + dev_info(dev, "SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); -- cgit v1.2.3 From f13e220161e738c2710b9904dcb3cf8bb0bcce61 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Fri, 7 Aug 2009 16:17:49 -0700 Subject: libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures libata EH decrements scmd->retries when the command failed for reasons unrelated to the command itself so that, for example, commands aborted due to suspend / resume cycle don't get penalized; however, decrementing scmd->retries isn't enough for ATA passthrough commands. Without this fix, ATA passthrough commands are not resend to the drive, and no error is signalled to the caller because: - allowed retry count is 1 - ata_eh_qc_complete fill the sense data, so result is valid - sense data is filled with untouched ATA registers. Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-eh.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c69fcce505c0..370462fa8e01 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1322,14 +1322,14 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc) * should be retried. To be used from EH. * * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried + * scmd->allowed is incremented for commands which get retried * due to unrelated failures (qc->err_mask is zero). */ void ata_eh_qc_retry(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; + if (!qc->err_mask) + scmd->allowed++; __ata_eh_qc_complete(qc); } -- cgit v1.2.3 From fa070ee6dc70bcc19737a2406d741b089b3149d5 Mon Sep 17 00:00:00 2001 From: Lukasz Dorau Date: Mon, 14 Oct 2013 18:18:53 +0200 Subject: libahci: fix turning on LEDs in ahci_start_port() If EM Transmit bit is busy during init ata_msleep() is called. It is wrong - msleep() should be used instead of ata_msleep(), because if EM Transmit bit is busy for one port, it will be busy for all other ports too, so using ata_msleep() causes wasting tries for another ports. The most common scenario looks like that now (six ports try to transmit a LED meaasege): - port #0 tries for the 1st time and succeeds - ports #1-5 try for the 1st time and sleeps - port #1 tries for the 2nd time and succeeds - ports #2-5 try for the 2nd time and sleeps - port #2 tries for the 3rd time and succeeds - ports #3-5 try for the 3rd time and sleeps - port #3 tries for the 4th time and succeeds - ports #4-5 try for the 4th time and sleeps - port #4 tries for the 5th time and succeeds - port #5 tries for the 5th time and sleeps At this moment port #5 wasted all its five tries and failed to initialize. Because there are only 5 (EM_MAX_RETRY) tries available usually only five ports succeed to initialize. The sixth port and next ones usually will fail. If msleep() is used instead of ata_msleep() the first port succeeds to initialize in the first try and next ones usually succeed to initialize in the second try. tj: updated comment Signed-off-by: Lukasz Dorau Signed-off-by: Tejun Heo --- drivers/ata/libahci.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index acfd0f711069..aaac4fb0d564 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -778,8 +778,16 @@ static void ahci_start_port(struct ata_port *ap) rc = ap->ops->transmit_led_message(ap, emp->led_state, 4); + /* + * If busy, give a breather but do not + * release EH ownership by using msleep() + * instead of ata_msleep(). EM Transmit + * bit is busy for the whole host and + * releasing ownership will cause other + * ports to fail the same way. + */ if (rc == -EBUSY) - ata_msleep(ap, 1); + msleep(1); else break; } -- cgit v1.2.3 From b08fc109ce4a32ce2f73f6e0437abc94ab1dd023 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Thu, 17 Oct 2013 15:38:53 +0200 Subject: ATA / ACPI: remove power dependent device handling Previously, we wanted SCSI devices corrsponding to ATA devices to be runtime resumed when the power resource for those ATA device was turned on by some other device, so we added the SCSI device to the dependent device list of the ATA device's ACPI node. However, this code has no effect after commit 41863fc (ACPI / power: Drop automaitc resume of power resource dependent devices) and the mechanism it was supposed to implement is regarded as a bad idea now, so drop it. [rjw: Changelog] Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki --- drivers/ata/libata-acpi.c | 14 -------------- drivers/ata/libata-scsi.c | 3 --- drivers/ata/libata.h | 4 ---- 3 files changed, 21 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 4ba8b0405572..ab714d2ad978 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -1035,17 +1035,3 @@ void ata_acpi_on_disable(struct ata_device *dev) { ata_acpi_clear_gtf(dev); } - -void ata_scsi_acpi_bind(struct ata_device *dev) -{ - acpi_handle handle = ata_dev_acpi_handle(dev); - if (handle) - acpi_dev_pm_add_dependent(handle, &dev->sdev->sdev_gendev); -} - -void ata_scsi_acpi_unbind(struct ata_device *dev) -{ - acpi_handle handle = ata_dev_acpi_handle(dev); - if (handle) - acpi_dev_pm_remove_dependent(handle, &dev->sdev->sdev_gendev); -} diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 97a0cef12959..db6dfcfa3e2e 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3679,7 +3679,6 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); - ata_scsi_acpi_bind(dev); } else { dev->sdev = NULL; } @@ -3767,8 +3766,6 @@ static void ata_scsi_remove_dev(struct ata_device *dev) struct scsi_device *sdev; unsigned long flags; - ata_scsi_acpi_unbind(dev); - /* Alas, we need to grab scan_mutex to ensure SCSI device * state doesn't change underneath us and thus * scsi_device_get() always succeeds. The mutex locking can diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index eeeb77845d48..45b5ab3a95d5 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -121,8 +121,6 @@ extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state); extern void ata_acpi_bind_port(struct ata_port *ap); extern void ata_acpi_bind_dev(struct ata_device *dev); extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev); -extern void ata_scsi_acpi_bind(struct ata_device *dev); -extern void ata_scsi_acpi_unbind(struct ata_device *dev); #else static inline void ata_acpi_dissociate(struct ata_host *host) { } static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } @@ -133,8 +131,6 @@ static inline void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) { } static inline void ata_acpi_bind_port(struct ata_port *ap) {} static inline void ata_acpi_bind_dev(struct ata_device *dev) {} -static inline void ata_scsi_acpi_bind(struct ata_device *dev) {} -static inline void ata_scsi_acpi_unbind(struct ata_device *dev) {} #endif /* libata-scsi.c */ -- cgit v1.2.3