From 1f39847255a02c69190ae30c33b8ccf4c10840df Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:54:48 -0400 Subject: sata_mv: move SOC_FLAG to hpriv Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fb81f0c7a8c2..f6a716ef5a16 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -122,8 +122,6 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - /* SoC integrated controllers, no PCI interface */ - MV_FLAG_SOC = (1 << 28), MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | @@ -362,6 +360,7 @@ enum { MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ + MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -374,7 +373,7 @@ enum { #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE) -#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC)) +#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC) #define WINDOW_CTRL(i) (0x20030 + ((i) << 4)) #define WINDOW_BASE(i) (0x20034 + ((i) << 4)) @@ -652,7 +651,7 @@ static const struct ata_port_info mv_port_info[] = { .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS | MV_FLAG_SOC, + .flags = MV_GENIIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -1254,7 +1253,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (HAS_PCI(ap->host)) + if (!IS_SOC(hpriv)) cfg |= (1 << 18); /* enab early completion */ if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ @@ -2225,7 +2224,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) * a bogus register value which can indicate HW removal or PCI fault. */ if (pending_irqs && main_irq_cause != 0xffffffffU) { - if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host))) + if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv))) handled = mv_pci_error(host, hpriv->base); else handled = mv_host_intr(host, pending_irqs); @@ -2876,7 +2875,7 @@ static unsigned int mv_in_pcix_mode(struct ata_host *host) void __iomem *mmio = hpriv->base; u32 reg; - if (!HAS_PCI(host) || !IS_PCIE(hpriv)) + if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) return 0; /* not PCI-X capable */ reg = readl(mmio + MV_PCI_MODE_OFS); if ((reg & MV_PCI_MODE_MASK) == 0) @@ -3018,7 +3017,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; case chip_soc: hpriv->ops = &mv_soc_ops; - hp_flags |= MV_HP_ERRATA_60X1C0; + hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0; break; default: @@ -3062,12 +3061,12 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) if (rc) goto done; - if (HAS_PCI(host)) { - hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; - hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; - } else { + if (IS_SOC(hpriv)) { hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS; hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS; + } else { + hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; + hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } /* global interrupt mask: 0 == mask everything */ @@ -3093,7 +3092,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) mv_port_init(&ap->ioaddr, port_mmio); #ifdef CONFIG_PCI - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { unsigned int offset = port_mmio - mmio; ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); @@ -3113,7 +3112,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { /* Clear any currently outstanding host interrupt conditions */ writelfl(0, mmio + hpriv->irq_cause_ofs); -- cgit v1.2.3 From 8c30a8b9b574cf6c51e207464b852a6f559da153 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:56:31 -0400 Subject: sata_mv: PHY_MODEx errata fixes Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index f6a716ef5a16..a39779aed8f5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2546,7 +2546,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); int fix_phy_mode4 = hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - u32 m2, tmp; + u32 m2, m3; if (fix_phy_mode2) { m2 = readl(port_mmio + PHY_MODE2); @@ -2563,27 +2563,27 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, udelay(200); } - /* who knows what this magic does */ - tmp = readl(port_mmio + PHY_MODE3); - tmp &= ~0x7F800000; - tmp |= 0x2A800000; - writel(tmp, port_mmio + PHY_MODE3); + /* + * Gen-II/IIe PHY_MODE3 errata RM#2: + * Achieves better receiver noise performance than the h/w default: + */ + m3 = readl(port_mmio + PHY_MODE3); + m3 = (m3 & 0x1f) | (0x5555601 << 5); + writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; m4 = readl(port_mmio + PHY_MODE4); - if (hp_flags & MV_HP_ERRATA_60X1B2) - tmp = readl(port_mmio + PHY_MODE3); - /* workaround for errata FEr SATA#10 (part 1) */ m4 = (m4 & ~(1 << 1)) | (1 << 0); - writel(m4, port_mmio + PHY_MODE4); + /* enforce bit restrictions on GenIIe devices */ + if (IS_GEN_IIE(hpriv)) + m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - if (hp_flags & MV_HP_ERRATA_60X1B2) - writel(tmp, port_mmio + PHY_MODE3); + writel(m4, port_mmio + PHY_MODE4); } /* Revert values of pre-emphasis and signal amps to the saved ones */ -- cgit v1.2.3 From 5cf73bfb061552aa18d816d2859409be9ace5306 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:58:56 -0400 Subject: sata_mv: nuke unreleased GenIIe revisions The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a39779aed8f5..969a76987781 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.21" +#define DRV_VERSION "1.22" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -354,7 +354,6 @@ enum { MV_HP_ERRATA_50XXB2 = (1 << 2), MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_ERRATA_XX42A0 = (1 << 5), MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ @@ -811,12 +810,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crqb_dma & 0xffffffff) | index, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); /* * initialize response queue @@ -826,13 +820,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, WARN_ON(pp->crpb_dma & 0xff); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crpb_dma & 0xffffffff) | index, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } @@ -3002,10 +2990,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hp_flags |= MV_HP_CUT_THROUGH; switch (pdev->revision) { - case 0x0: - hp_flags |= MV_HP_ERRATA_XX42A0; - break; - case 0x1: + case 0x2: /* Rev.B0: the first/only public release */ hp_flags |= MV_HP_ERRATA_60X1C0; break; default: -- cgit v1.2.3 From b406c7a6655da7a2fcd9f72e41262f93ff707748 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 12:01:12 -0400 Subject: sata_mv: workaround for 60x1 errata sata13 The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 969a76987781..17093e600d80 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.22" +#define DRV_VERSION "1.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2557,7 +2557,6 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, */ m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); - writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; @@ -2573,6 +2572,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, writel(m4, port_mmio + PHY_MODE4); } + /* + * Workaround for 60x1-B2 errata SATA#13: + * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, + * so we must always rewrite PHY_MODE3 after PHY_MODE4. + */ + writel(m3, port_mmio + PHY_MODE3); /* Revert values of pre-emphasis and signal amps to the saved ones */ m2 = readl(port_mmio + PHY_MODE2); -- cgit v1.2.3 From 0388a8c0d54aa039758a8eca68d82325a563f8db Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 13:41:52 -0400 Subject: sata_mv: implement SoC guideline SATA_S11 The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 17093e600d80..acf347f71a2f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.23" +#define DRV_VERSION "1.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2558,6 +2558,10 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); + /* Guideline 88F5182 (GL# SATA-S11) */ + if (IS_SOC(hpriv)) + m3 &= ~0x1c; + if (fix_phy_mode4) { u32 m4; -- cgit v1.2.3 From 23cf296e3b047da46112eb6b4dc89917c93c8f19 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 May 2008 22:04:22 +0900 Subject: ata_piix: fix macbook ich8m problems ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo Cc: MATSUBAYASHI 'Shaolin' Kohji Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index a9027b8fbdd5..3548ee7014ca 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -247,10 +247,11 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller 2 IDE (ICH8) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, - /* Mobile SATA Controller IDE (ICH8M) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* Mobile SATA Controller IDE (ICH8M), Apple */ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + /* Mobile SATA Controller IDE (ICH8M) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ @@ -526,7 +527,7 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, + .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, -- cgit v1.2.3 From 2da676594a73825f10d2a99358cc7465119684f9 Mon Sep 17 00:00:00 2001 From: Pradeep Singh Rautela Date: Thu, 29 May 2008 23:28:14 +0530 Subject: ata: Convert to static DEFINE_SPINLOCK(lock) Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3c89f205c83f..cc816ca623d3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5403,7 +5403,7 @@ static void ata_host_stop(struct device *gendev, void *res) */ static void ata_finalize_port_ops(struct ata_port_operations *ops) { - static spinlock_t lock = SPIN_LOCK_UNLOCKED; + static DEFINE_SPINLOCK(lock); const struct ata_port_operations *cur; void **begin = (void **)ops; void **end = (void **)&ops->inherits; -- cgit v1.2.3 From ec2a20e61974f7c9ebe6dd99ac479ec309a750bc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 30 Apr 2008 12:57:00 -0700 Subject: libata: fix libata-scsi kernel-doc notation Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index aeb6e01d82ce..2e6e1622dc6d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1637,6 +1637,7 @@ defer: /** * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. * @flags: unsigned long variable to store irq enable status * @copy_in: copy in from user buffer * @@ -1954,7 +1955,7 @@ static unsigned int ata_msense_ctl_mode(u8 *buf) /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page - * @bufp: output buffer + * @buf: output buffer * * Generate a generic MODE SENSE r/w error recovery page. * -- cgit v1.2.3 From 19ef9d5e45ce805700f34c248a71a511877b8a5d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 21 May 2008 14:11:24 +0900 Subject: libata: SRST can't be trusted on PMP sil3726 As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-pmp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 0f9386d4a5a0..7daf4c0f6216 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -322,9 +322,12 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ ata_port_for_each_link(link, ap) { - /* class code report is unreliable */ + /* Class code report is unreliable and SRST + * times out under certain configurations. + */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) -- cgit v1.2.3 From 034d8e8f273fcb02bebd6a62d8023ffa409fe92f Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Tue, 20 May 2008 00:19:45 -0500 Subject: [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 224 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 163 insertions(+), 61 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 853559e32315..3924e7209a44 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -34,7 +34,7 @@ enum { SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ), + ATA_FLAG_PMP | ATA_FLAG_NCQ), SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ @@ -395,7 +395,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) cd = (struct command_desc *)pp->cmdentry + tag; cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; - ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis); VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", cd->cfis[0], cd->cfis[1], cd->cfis[2]); @@ -438,6 +438,8 @@ static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) ioread32(CA + hcr_base), ioread32(CE + hcr_base), ioread32(CC + hcr_base)); + iowrite32(qc->dev->link->pmp, CQPMP + hcr_base); + /* Simply queue command to the controller/device */ iowrite32(1 << tag, CQ + hcr_base); @@ -558,11 +560,36 @@ static void sata_fsl_thaw(struct ata_port *ap) ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); } +static void sata_fsl_pmp_attach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL); +} + +static void sata_fsl_pmp_detach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_PMP_ATTACHED; + iowrite32(temp, hcr_base + HCONTROL); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + +} + static int sata_fsl_port_start(struct ata_port *ap) { struct device *dev = ap->host->dev; struct sata_fsl_port_priv *pp; - int retval; void *mem; dma_addr_t mem_dma; struct sata_fsl_host_priv *host_priv = ap->host->private_data; @@ -688,12 +715,13 @@ static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline) } static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) + unsigned long deadline) { struct ata_port *ap = link->ap; struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); u32 temp; struct ata_taskfile tf; u8 *cfis; @@ -703,6 +731,9 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, DPRINTK("in xx_softreset\n"); + if (pmp != SATA_PMP_CTRL_PORT) + goto issue_srst; + try_offline_again: /* * Force host controller to go off-line, aborting current operations @@ -746,6 +777,7 @@ try_offline_again: temp = ioread32(hcr_base + HCONTROL); temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); + temp |= HCONTROL_PMP_ATTACHED; iowrite32(temp, hcr_base + HCONTROL); temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); @@ -771,7 +803,8 @@ try_offline_again: ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); - goto err; + *class = ATA_DEV_NONE; + goto out; } /* @@ -783,7 +816,8 @@ try_offline_again: if ((temp & 0xFF) != 0x18) { ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); - goto err; + *class = ATA_DEV_NONE; + goto out; } else { ata_port_printk(ap, KERN_INFO, "Signature Update detected @ %d msecs\n", @@ -798,6 +832,7 @@ try_offline_again: * reached here, we can send a command to the target device */ +issue_srst: DPRINTK("Sending SRST/device reset\n"); ata_tf_init(link->device, &tf); @@ -808,7 +843,7 @@ try_offline_again: SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", cfis[0], cfis[1], cfis[2], cfis[3]); @@ -854,8 +889,10 @@ try_offline_again: sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); msleep(150); /* ?? */ @@ -886,12 +923,21 @@ try_offline_again: VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); } +out: return 0; err: return -EIO; } +static void sata_fsl_error_handler(struct ata_port *ap) +{ + + DPRINTK("in xx_error_handler\n"); + sata_pmp_error_handler(ap); + +} + static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -905,18 +951,21 @@ static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) static void sata_fsl_error_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; - struct ata_eh_info *ehi = &link->eh_info; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - u32 hstatus, dereg, cereg = 0, SError = 0; + u32 hstatus, dereg=0, cereg = 0, SError = 0; unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - int freeze = 0; + int freeze = 0, abort=0; + struct ata_link *link = NULL; + struct ata_queued_cmd *qc = NULL; + struct ata_eh_info *ehi; hstatus = ioread32(hcr_base + HSTATUS); cereg = ioread32(hcr_base + CE); + /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; ata_ehi_clear_desc(ehi); /* @@ -926,42 +975,28 @@ static void sata_fsl_error_intr(struct ata_port *ap) sata_fsl_scr_read(ap, SCR_ERROR, &SError); if (unlikely(SError & 0xFFFF0000)) { sata_fsl_scr_write(ap, SCR_ERROR, SError); - err_mask |= AC_ERR_ATA_BUS; } DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", hstatus, cereg, ioread32(hcr_base + DE), SError); - /* handle single device errors */ - if (cereg) { - /* - * clear the command error, also clears queue to the device - * in error, and we can (re)issue commands to this device. - * When a device is in error all commands queued into the - * host controller and at the device are considered aborted - * and the queue for that device is stopped. Now, after - * clearing the device error, we can issue commands to the - * device to interrogate it to find the source of the error. - */ - dereg = ioread32(hcr_base + DE); - iowrite32(dereg, hcr_base + DE); - iowrite32(cereg, hcr_base + CE); + /* handle fatal errors */ + if (hstatus & FATAL_ERROR_DECODE) { + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; - DPRINTK("single device error, CE=0x%x, DE=0x%x\n", - ioread32(hcr_base + CE), ioread32(hcr_base + DE)); /* - * We should consider this as non fatal error, and TF must - * be updated as done below. + * Ignore serror in case of fatal errors as we always want + * to do a soft-reset of the FSL SATA controller. Analyzing + * serror may cause libata to schedule a hard-reset action, + * and hard-reset currently does not do controller + * offline/online, causing command timeouts and leads to an + * un-recoverable state, hence make libATA ignore + * autopsy in case of fatal errors. */ - err_mask |= AC_ERR_DEV; - } + ehi->flags |= ATA_EHI_NO_AUTOPSY; - /* handle fatal errors */ - if (hstatus & FATAL_ERROR_DECODE) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_RESET; - /* how will fatal error interrupts be completed ?? */ freeze = 1; } @@ -971,30 +1006,83 @@ static void sata_fsl_error_intr(struct ata_port *ap) /* Setup a soft-reset EH action */ ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", "PHY RDY changed"); freeze = 1; } - /* record error info */ - qc = ata_qc_from_tag(ap, link->active_tag); + /* handle single device errors */ + if (cereg) { + /* + * clear the command error, also clears queue to the device + * in error, and we can (re)issue commands to this device. + * When a device is in error all commands queued into the + * host controller and at the device are considered aborted + * and the queue for that device is stopped. Now, after + * clearing the device error, we can issue commands to the + * device to interrogate it to find the source of the error. + */ + abort = 1; + + DPRINTK("single device error, CE=0x%x, DE=0x%x\n", + ioread32(hcr_base + CE), ioread32(hcr_base + DE)); - if (qc) + /* find out the offending link and qc */ + if (ap->nr_pmp_links) { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + if (dereg < ap->nr_pmp_links) { + link = &ap->pmp_link[dereg]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + + err_mask |= AC_ERR_DEV; + + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_HARDRESET; + freeze = 1; + } + } else { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + err_mask |= AC_ERR_DEV; + } + } + + /* record error info */ + if (qc) { qc->err_mask |= err_mask; - else + } else ehi->err_mask |= err_mask; ehi->action |= action; - ehi->serror |= SError; /* freeze or abort */ if (freeze) ata_port_freeze(ap); - else - ata_port_abort(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } } static void sata_fsl_host_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, qc_active = 0; @@ -1017,10 +1105,19 @@ static void sata_fsl_host_intr(struct ata_port *ap) return; } - if (link->sactive) { /* only true for NCQ commands */ + /* Read command completed register */ + qc_active = ioread32(hcr_base + CC); + + VPRINTK("Status of all queues :\n"); + VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", + qc_active, + ioread32(hcr_base + CA), + ioread32(hcr_base + CE), + ioread32(hcr_base + CQ), + ap->qc_active); + + if (qc_active & ap->qc_active) { int i; - /* Read command completed register */ - qc_active = ioread32(hcr_base + CC); /* clear CC bit, this will also complete the interrupt */ iowrite32(qc_active, hcr_base + CC); @@ -1032,8 +1129,9 @@ static void sata_fsl_host_intr(struct ata_port *ap) for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { if (qc_active & (1 << i)) { qc = ata_qc_from_tag(ap, i); - if (qc) + if (qc) { ata_qc_complete(qc); + } DPRINTK ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", i, ioread32(hcr_base + CC), @@ -1042,19 +1140,21 @@ static void sata_fsl_host_intr(struct ata_port *ap) } return; - } else if (ap->qc_active) { + } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { iowrite32(1, hcr_base + CC); - qc = ata_qc_from_tag(ap, link->active_tag); + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n", - link->active_tag, ioread32(hcr_base + CC)); + DPRINTK("completing non-ncq cmd, CC=0x%x\n", + ioread32(hcr_base + CC)); - if (qc) + if (qc) { ata_qc_complete(qc); + } } else { /* Spurious Interrupt!! */ DPRINTK("spurious interrupt!!, CC = 0x%x\n", ioread32(hcr_base + CC)); + iowrite32(qc_active, hcr_base + CC); return; } } @@ -1130,9 +1230,6 @@ static int sata_fsl_init_controller(struct ata_host *host) iowrite32(0x00000FFFF, hcr_base + CE); iowrite32(0x00000FFFF, hcr_base + DE); - /* initially assuming no Port multiplier, set CQPMP to 0 */ - iowrite32(0x0, hcr_base + CQPMP); - /* * host controller will be brought on-line, during xx_port_start() * callback, that should also initiate the OOB, COMINIT sequence @@ -1154,8 +1251,8 @@ static struct scsi_host_template sata_fsl_sht = { .dma_boundary = ATA_DMA_BOUNDARY, }; -static const struct ata_port_operations sata_fsl_ops = { - .inherits = &sata_port_ops, +static struct ata_port_operations sata_fsl_ops = { + .inherits = &sata_pmp_port_ops, .qc_prep = sata_fsl_qc_prep, .qc_issue = sata_fsl_qc_issue, @@ -1168,10 +1265,15 @@ static const struct ata_port_operations sata_fsl_ops = { .thaw = sata_fsl_thaw, .prereset = sata_fsl_prereset, .softreset = sata_fsl_softreset, + .pmp_softreset = sata_fsl_softreset, + .error_handler = sata_fsl_error_handler, .post_internal_cmd = sata_fsl_post_internal_cmd, .port_start = sata_fsl_port_start, .port_stop = sata_fsl_port_stop, + + .pmp_attach = sata_fsl_pmp_attach, + .pmp_detach = sata_fsl_pmp_detach, }; static const struct ata_port_info sata_fsl_port_info[] = { -- cgit v1.2.3 From 3072c379bccfa2844e33103ed9ff530780e660ea Mon Sep 17 00:00:00 2001 From: peerchen Date: Mon, 19 May 2008 14:44:57 +0800 Subject: ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 97f83fb2ee2e..544b7d6c617c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -502,10 +502,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ -- cgit v1.2.3 From 664d080c41463570b95717b5ad86e79dc1be0877 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Tue, 3 Jun 2008 20:27:59 +0200 Subject: [libata] ACPI: Properly handle bay devices in dock stations * Differentiate between bay devices in dock stations and others: - When an ACPI_NOTIFY_EJECT_REQUEST appears, just signal uevent to userspace (that is when the optional eject button on a bay device is pressed/pulled) giving the possibility to unmount file systems and to clean up. Also, only send uevent in case we get an EJECT_REQUEST without doing anything else. In other cases, you'll get an add/remove event because libata attaches/detaches the device. - In case of a dock event, which in turn signals an ACPI_NOTIFY_EJECT_REQUEST, immediately detach the device, because it may already have been gone * In case of an ACPI_NOTIFY_DEVICE/BUS_CHECK, evaluate _STA to check if the device has been plugged or unplugged. If plugged, hotplug it, if unplugged, just signal event to userspace (initial patch by Matthew Garrett ) * Call ACPI _EJ0 for detached devices Signed-off-by: Holger Macht Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 165 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 114 insertions(+), 51 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index dbf6ca781f66..3ff8b14420d9 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -118,12 +118,62 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } -static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device - *dev, u32 event) +static void ata_acpi_eject_device(acpi_handle handle) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = 1; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0", + &arg_list, NULL))) + printk(KERN_ERR "Failed to evaluate _EJ0!\n"); +} + +/* @ap and @dev are the same as ata_acpi_handle_hotplug() */ +static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) +{ + if (dev) + dev->flags |= ATA_DFLAG_DETACH; + else { + struct ata_link *tlink; + struct ata_device *tdev; + + ata_port_for_each_link(tlink, ap) + ata_link_for_each_dev(tdev, tlink) + tdev->flags |= ATA_DFLAG_DETACH; + } + + ata_port_schedule_eh(ap); +} + +/** + * ata_acpi_handle_hotplug - ACPI event handler backend + * @ap: ATA port ACPI event occurred + * @dev: ATA device ACPI event occurred (can be NULL) + * @event: ACPI event which occurred + * @is_dock_event: boolean indicating whether the event was a dock one + * + * All ACPI bay / device realted events end up in this function. If + * the event is port-wide @dev is NULL. If the event is specific to a + * device, @dev points to it. + * + * Hotplug (as opposed to unplug) notification is always handled as + * port-wide while unplug only kills the target device on device-wide + * event. + * + * LOCKING: + * ACPI notify handler context. May sleep. + */ +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, + u32 event, int is_dock_event) { char event_string[12]; char *envp[] = { event_string, NULL }; - struct ata_eh_info *ehi; + struct ata_eh_info *ehi = &ap->link.eh_info; struct kobject *kobj = NULL; int wait = 0; unsigned long flags; @@ -131,87 +181,100 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device unsigned long sta; acpi_status status; - if (!ap) - ap = dev->link->ap; - ehi = &ap->link.eh_info; - - spin_lock_irqsave(ap->lock, flags); - - if (dev) + if (dev) { + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; handle = dev->acpi_handle; - else + } else { + kobj = &ap->dev->kobj; handle = ap->acpi_handle; + } status = acpi_get_handle(handle, "_EJ0", &tmphandle); - if (ACPI_FAILURE(status)) { - /* This device is not ejectable */ - spin_unlock_irqrestore(ap->lock, flags); + if (ACPI_FAILURE(status)) + /* This device does not support hotplug */ return; - } - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status)) { - printk ("Unable to determine bay status\n"); - spin_unlock_irqrestore(ap->lock, flags); - return; - } + spin_lock_irqsave(ap->lock, flags); switch (event) { case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: ata_ehi_push_desc(ehi, "ACPI event"); - if (!sta) { - /* Device has been unplugged */ - if (dev) - dev->flags |= ATA_DFLAG_DETACH; - else { - struct ata_link *tlink; - struct ata_device *tdev; - - ata_port_for_each_link(tlink, ap) { - ata_link_for_each_dev(tdev, tlink) { - tdev->flags |= - ATA_DFLAG_DETACH; - } - } - } - ata_port_schedule_eh(ap); - wait = 1; - } else { + + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status)) { + ata_port_printk(ap, KERN_ERR, + "acpi: failed to determine bay status (0x%x)\n", + status); + break; + } + + if (sta) { ata_ehi_hotplugged(ehi); ata_port_freeze(ap); + } else { + /* The device has gone - unplug it */ + ata_acpi_detach_device(ap, dev); + wait = 1; } + break; + case ACPI_NOTIFY_EJECT_REQUEST: + ata_ehi_push_desc(ehi, "ACPI event"); + + if (!is_dock_event) + break; + + /* undock event - immediate unplug */ + ata_acpi_detach_device(ap, dev); + wait = 1; + break; } + /* make sure kobj doesn't go away while ap->lock is released */ + kobject_get(kobj); + spin_unlock_irqrestore(ap->lock, flags); - if (wait) + if (wait) { ata_port_wait_eh(ap); + ata_acpi_eject_device(handle); + } - if (dev) { - if (dev->sdev) - kobj = &dev->sdev->sdev_gendev.kobj; - } else - kobj = &ap->dev->kobj; - - if (kobj) { + if (kobj && !is_dock_event) { sprintf(event_string, "BAY_EVENT=%d", event); kobject_uevent_env(kobj, KOBJ_CHANGE, envp); } + + kobject_put(kobj); +} + +static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_device *dev = data; + + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1); +} + +static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_port *ap = data; + + ata_acpi_handle_hotplug(ap, NULL, event, 1); } static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data) { struct ata_device *dev = data; - ata_acpi_handle_hotplug(NULL, dev, event); + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0); } static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data) { struct ata_port *ap = data; - ata_acpi_handle_hotplug(ap, NULL, event); + ata_acpi_handle_hotplug(ap, NULL, event, 0); } /** @@ -252,7 +315,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_ap_notify, ap); /* we might be on a docking station */ register_hotplug_dock_device(ap->acpi_handle, - ata_acpi_ap_notify, ap); + ata_acpi_ap_notify_dock, ap); } for (j = 0; j < ata_link_max_devices(&ap->link); j++) { @@ -264,7 +327,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_dev_notify, dev); /* we might be on a docking station */ register_hotplug_dock_device(dev->acpi_handle, - ata_acpi_dev_notify, dev); + ata_acpi_dev_notify_dock, dev); } } } -- cgit v1.2.3 From e1fefea9cc4bc231b5c23fe19e3682fe061dc097 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 3 Jun 2008 18:59:02 +0200 Subject: [libata] ata_piix: more acer short cable quirks Add ICH6 on ACER Aspire 1694WLMi to list of laptops that use short cables rather than 80 wire OriginalAuthor: Tiago Sousa OriginalLocation: http://launchpadlibrarian.net/11627664/new.ich_laptop.short.cables.diff Bug: #187121 Signed-off-by: Colin Ian King Signed-off-by: maximilian attems Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3548ee7014ca..81b7ae376951 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -574,6 +574,8 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ + { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ + { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ { 0, } -- cgit v1.2.3 From ba069e376cc0801cd28352ca5986ce20413acb21 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sat, 31 May 2008 16:46:34 -0400 Subject: sata_mv: PHY_MODE4 cleanups The handling for PHY_MODE4 was originally just cloned from the Marvell proprietary driver (with their blessing). But we can do better than that. Tidy things up with some judicious mask definitions, to improve maintainability. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index acf347f71a2f..60391e9a84db 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -224,6 +224,11 @@ enum { PHY_MODE3 = 0x310, PHY_MODE4 = 0x314, + PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ + PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ + PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ + PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ + PHY_MODE2 = 0x330, SATA_IFCTL_OFS = 0x344, SATA_TESTCTL_OFS = 0x348, @@ -2563,17 +2568,16 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 &= ~0x1c; if (fix_phy_mode4) { - u32 m4; - - m4 = readl(port_mmio + PHY_MODE4); - - /* workaround for errata FEr SATA#10 (part 1) */ - m4 = (m4 & ~(1 << 1)) | (1 << 0); - - /* enforce bit restrictions on GenIIe devices */ + u32 m4 = readl(port_mmio + PHY_MODE4); + /* + * Enforce reserved-bit restrictions on GenIIe devices only. + * For earlier chipsets, force only the internal config field + * (workaround for errata FEr SATA#10 part 1). + */ if (IS_GEN_IIE(hpriv)) - m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - + m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; + else + m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; writel(m4, port_mmio + PHY_MODE4); } /* -- cgit v1.2.3 From a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 29 May 2008 22:10:58 +0100 Subject: libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl - Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 115 ++++++++++++++++++++++++++++++++++++++------ drivers/ata/pata_icside.c | 2 +- drivers/ata/pata_rb532_cf.c | 4 +- drivers/ata/pata_scc.c | 5 +- include/linux/libata.h | 16 +----- 5 files changed, 109 insertions(+), 33 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 3c2d2289f85e..90d20c615ef5 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -247,7 +247,7 @@ u8 ata_sff_check_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -u8 ata_sff_altstatus(struct ata_port *ap) +static u8 ata_sff_altstatus(struct ata_port *ap) { if (ap->ops->sff_check_altstatus) return ap->ops->sff_check_altstatus(ap); @@ -255,6 +255,93 @@ u8 ata_sff_altstatus(struct ata_port *ap) return ioread8(ap->ioaddr.altstatus_addr); } +/** + * ata_sff_irq_status - Check if the device is busy + * @ap: port where the device is + * + * Determine if the port is currently busy. Uses altstatus + * if available in order to avoid clearing shared IRQ status + * when finding an IRQ source. Non ctl capable devices don't + * share interrupt lines fortunately for us. + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_sff_irq_status(struct ata_port *ap) +{ + u8 status; + + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + status = ata_sff_altstatus(ap); + /* Not us: We are busy */ + if (status & ATA_BUSY) + return status; + } + /* Clear INTRQ latch */ + status = ata_sff_check_status(ap); + return status; +} + +/** + * ata_sff_sync - Flush writes + * @ap: Port to wait for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_sff_sync(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus) + ap->ops->sff_check_altstatus(ap); + else if (ap->ioaddr.altstatus_addr) + ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_sff_pause - Flush writes and wait 400nS + * @ap: Port to pause for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sff_pause(struct ata_port *ap) +{ + ata_sff_sync(ap); + ndelay(400); +} + +/** + * ata_sff_dma_pause - Pause before commencing DMA + * @ap: Port to pause for. + * + * Perform I/O fencing and ensure sufficient cycle delays occur + * for the HDMA1:0 transition + */ + +void ata_sff_dma_pause(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + /* An altstatus read will cause the needed delay without + messing up the IRQ status */ + ata_sff_altstatus(ap); + return; + } + /* There are no DMA controllers without ctl. BUG here to ensure + we never violate the HDMA1:0 transition timing and risk + corruption. */ + BUG(); +} + /** * ata_sff_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled @@ -742,7 +829,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) } else ata_pio_sector(qc); - ata_sff_altstatus(qc->ap); /* flush */ + ata_sff_sync(qc->ap); /* flush */ } /** @@ -763,8 +850,9 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) WARN_ON(qc->dev->cdb_len < 12); ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_sff_altstatus(ap); /* flush */ - + ata_sff_sync(ap); + /* FIXME: If the CDB is for DMA do we need to do the transition delay + or is bmdma_start guaranteed to do it ? */ switch (qc->tf.protocol) { case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; @@ -905,7 +993,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (unlikely(__atapi_pio_bytes(qc, bytes))) goto err_out; - ata_sff_altstatus(ap); /* flush */ + ata_sff_sync(ap); /* flush */ return; @@ -1489,14 +1577,10 @@ inline unsigned int ata_sff_host_intr(struct ata_port *ap, goto idle_irq; } - /* check altstatus */ - status = ata_sff_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - /* check main status, clearing INTRQ */ - status = ap->ops->sff_check_status(ap); - if (unlikely(status & ATA_BUSY)) + /* check main status, clearing INTRQ if needed */ + status = ata_sff_irq_status(ap); + if (status & ATA_BUSY) goto idle_irq; /* ack bmdma irq events */ @@ -2030,7 +2114,7 @@ void ata_sff_error_handler(struct ata_port *ap) ap->ops->bmdma_stop(qc); } - ata_sff_altstatus(ap); + ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); @@ -2203,7 +2287,7 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) mmio + ATA_DMA_CMD); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); } /** @@ -2722,7 +2806,8 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dev_select); EXPORT_SYMBOL_GPL(ata_sff_check_status); -EXPORT_SYMBOL_GPL(ata_sff_altstatus); +EXPORT_SYMBOL_GPL(ata_sff_dma_pause); +EXPORT_SYMBOL_GPL(ata_sff_pause); EXPORT_SYMBOL_GPL(ata_sff_busy_sleep); EXPORT_SYMBOL_GPL(ata_sff_wait_ready); EXPORT_SYMBOL_GPL(ata_sff_tf_load); diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 17138436423d..cf9e9848f8b5 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -270,7 +270,7 @@ static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc) disable_dma(state->dma); /* see ata_bmdma_stop */ - ata_sff_altstatus(ap); + ata_sff_dma_pause(ap); } static u8 pata_icside_bmdma_status(struct ata_port *ap) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index a108d259f19d..f8b3ffc8ae9e 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -57,7 +57,9 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) struct ata_host *ah = ap->host; struct rb532_cf_info *info = ah->private_data; - ata_sff_altstatus(ap); + /* FIXME: Keep previous delay. If this is merely a fence then + ata_sff_sync might be sufficient. */ + ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index e965b251ca24..bbf5aa345e68 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -726,7 +726,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); /* dummy read */ } /** @@ -747,7 +747,8 @@ static u8 scc_bmdma_status (struct ata_port *ap) return host_stat; /* errata A252,A308 workaround: Step4 */ - if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) + if ((scc_check_altstatus(ap) & ATA_ERR) + && (int_status & INTSTS_INTRQ)) return (host_stat | ATA_DMA_INTR); /* errata A308 workaround Step5 */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 93e2b89d0c57..e57e5d08312d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1432,7 +1432,8 @@ extern void ata_sff_qc_prep(struct ata_queued_cmd *qc); extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_sff_check_status(struct ata_port *ap); -extern u8 ata_sff_altstatus(struct ata_port *ap); +extern void ata_sff_pause(struct ata_port *ap); +extern void ata_sff_dma_pause(struct ata_port *ap); extern int ata_sff_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, unsigned long timeout); extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline); @@ -1492,19 +1493,6 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv); #endif /* CONFIG_PCI */ -/** - * ata_sff_pause - Flush writes and pause 400 nanoseconds. - * @ap: Port to wait for. - * - * LOCKING: - * Inherited from caller. - */ -static inline void ata_sff_pause(struct ata_port *ap) -{ - ata_sff_altstatus(ap); - ndelay(400); -} - /** * ata_sff_busy_wait - Wait for a port status register * @ap: Port to wait for. -- cgit v1.2.3 From 6311c90a9ea16b4ab93ed48f1a9022647f6b3c43 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 5 Jun 2008 14:44:39 +0100 Subject: libata: fix G5 SATA broken on -rc5 Fix G5 SATA irq 18: nobody cared, reported on -rc5 by Olaf Hering: fixlet to a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl Signed-off-by: Hugh Dickins Acked-by: Alan Cox Tested-by: Olaf Hering Signed-off-by: Linus Torvalds --- drivers/ata/libata-sff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 90d20c615ef5..215d18672a5a 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -278,7 +278,7 @@ static u8 ata_sff_irq_status(struct ata_port *ap) return status; } /* Clear INTRQ latch */ - status = ata_sff_check_status(ap); + status = ap->ops->sff_check_status(ap); return status; } -- cgit v1.2.3 From e297d99e103f951a71fcb1534f1ff3480dd3a851 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 10 Jun 2008 00:13:04 +0900 Subject: ahci: workarounds for mcp65 MCP65 ahci can do NCQ but doesn't set the CAP bit and rev A0 and A1 can't do MSI but have MSI capability. Implement AHCI_HFLAG_YES_NCQ and apply appropriate workarounds. Signed-off-by: Tejun Heo Cc: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 544b7d6c617c..1c62b8e39645 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -89,6 +89,7 @@ enum { board_ahci_sb600 = 3, board_ahci_mv = 4, board_ahci_sb700 = 5, + board_ahci_mcp65 = 6, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -190,6 +191,7 @@ enum { AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ /* ap->flags bits */ @@ -384,6 +386,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_mcp65 */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -438,14 +448,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ /* NVIDIA */ - { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ @@ -624,6 +634,12 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_NCQ; } + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do PMP, turning off CAP_PMP\n"); @@ -2118,7 +2134,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host) static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info pi = ahci_port_info[ent->driver_data]; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -2167,6 +2184,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENOMEM; hpriv->flags |= (unsigned long)pi.private_data; + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); -- cgit v1.2.3 From bd17243a84632465f5403bc9eb8b4831bd67e582 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 10 Jun 2008 15:52:04 +0800 Subject: ahci: Workaround HW bug for SB600/700 SATA controller PMP support There is one bug in ATI SATA PMP of SB600 and SB700 old revision, which leads to soft reset failure. This patch can fix the bug. Signed-off-by: Shane Huang Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 99 ++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 82 insertions(+), 17 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1c62b8e39645..966ab401e523 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -255,6 +255,8 @@ static void ahci_pmp_attach(struct ata_port *ap); static void ahci_pmp_detach(struct ata_port *ap); static int ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, @@ -331,6 +333,12 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_sb600_ops = { + .inherits = &ahci_ops, + .softreset = ahci_sb600_softreset, + .pmp_softreset = ahci_sb600_softreset, +}; + #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { @@ -361,11 +369,11 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP), + AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mv */ { @@ -379,12 +387,11 @@ static const struct ata_port_info ahci_port_info[] = { }, /* board_ahci_sb700 */ { - AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_NO_PMP), + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mcp65 */ { @@ -1278,19 +1285,11 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, return 0; } -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { struct ata_port *ap = link->ap; - int pmp = sata_srst_pmp(link); const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1328,7 +1327,7 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, ahci_check_ready); + rc = ata_wait_after_reset(link, deadline, check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { reason = "device not ready"; @@ -1344,6 +1343,72 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, return rc; } +static int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} + +static int ahci_sb600_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); + + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "failed due to HW bug, retry pmp=0\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { -- cgit v1.2.3 From d799e083a80b220f3681d7790f11e77d1704022b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:46:30 +0900 Subject: ahci: jmb361 has only one port JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: Tejun Heo Cc: Gajo Petrovic Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 966ab401e523..29f34d03bd75 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -653,6 +653,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_PMP; } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && + port_map != 1) { + dev_printk(KERN_INFO, &pdev->dev, + "JMB361 has only one port, port_map 0x%x -> 0x%x\n", + port_map, 1); + port_map = 1; + } + /* * Temporary Marvell 6145 hack: PATA port presence * is asserted through the standard AHCI port -- cgit v1.2.3 From 5895ef9a5b746e7cc9ebda50c87fbd11562da0a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:36:26 +0900 Subject: libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++-- drivers/ata/libata-scsi.c | 16 +++++++--------- drivers/ata/libata.h | 2 +- 3 files changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index cc816ca623d3..303fc0d2b978 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) } /** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * atapi_check_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * * Allow low-level driver to filter ATA PACKET commands, returning @@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) +int atapi_check_dma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2e6e1622dc6d..57a43649a461 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (scmd->sc_data_direction == DMA_NONE); + int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); unsigned int nbytes; memset(qc->cdb, 0, dev->cdb_len); @@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) ata_qc_set_pc_nbytes(qc); /* check whether ATAPI DMA is safe */ - if (!using_pio && ata_check_atapi_dma(qc)) + if (!nodata && !using_pio && atapi_check_dma(qc)) using_pio = 1; /* Some controller variants snoop this value for Packet @@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); - if (using_pio || nodata) { - /* no data, or PIO data xfer */ - if (nodata) - qc->tf.protocol = ATAPI_PROT_NODATA; - else - qc->tf.protocol = ATAPI_PROT_PIO; - } else { + if (nodata) + qc->tf.protocol = ATAPI_PROT_NODATA; + else if (using_pio) + qc->tf.protocol = ATAPI_PROT_PIO; + else { /* DMA data xfer */ qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 4514283937ea..1cf803adbc95 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); +extern int atapi_check_dma(struct ata_queued_cmd *qc); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern void ata_dev_init(struct ata_device *dev); extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); -- cgit v1.2.3 From 3bd0a70ee9cc30ae81b39cb5ecad0fa7bcb4675b Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:11:16 -0400 Subject: sata_mv: enable async_notify for 60x1 Rev.C0 and higher The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 60391e9a84db..75fde48e1a73 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap) goto out_port_free_dma_mem; memset(pp->crpb, 0, MV_CRPB_Q_SZ); + /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) + ap->flags |= ATA_FLAG_AN; /* * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. * For later hardware, we need one unique sg_tbl per NCQ tag. -- cgit v1.2.3 From c6112bd86bc8f727bb732a47f2133e0ff12beda9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:13:02 -0400 Subject: sata_mv: warn on PIO with multiple DRQs Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 75fde48e1a73..28092bc50146 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1595,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) if ((qc->tf.protocol != ATA_PROT_DMA) && (qc->tf.protocol != ATA_PROT_NCQ)) { + static int limit_warnings = 10; + /* + * Errata SATA#16, SATA#24: warn if multiple DRQs expected. + * + * Someday, we might implement special polling workarounds + * for these, but it all seems rather unnecessary since we + * normally use only DMA for commands which transfer more + * than a single block of data. + * + * Much of the time, this could just work regardless. + * So for now, just log the incident, and allow the attempt. + */ + if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + --limit_warnings; + ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME + ": attempting PIO w/multiple DRQ: " + "this may fail due to h/w errata\n"); + } /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing -- cgit v1.2.3 From cc18e0fea7907e7a96b7df71b81838d518bc074e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 16 Jun 2008 12:16:26 +0100 Subject: LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9bf2986a2788..ae8494944c45 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -651,9 +651,17 @@ config PATA_WINBOND_VLB Support for the Winbond W83759A controller on Vesa Local Bus systems. +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC || PPC + depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. -- cgit v1.2.3 From 040dee53a724f54d47876674d50184873364f207 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 13 Jun 2008 18:05:02 +0900 Subject: ata_piix: add TECRA M4 to broken suspend list TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 81b7ae376951..a90ae03f56b2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1042,6 +1042,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"), }, }, + { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, { .ident = "TECRA M5", .matches = { -- cgit v1.2.3 From 9a3b103c27a7e3199b917bc3ca219530132afdfc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 18 Jun 2008 20:56:58 -0400 Subject: ahci: sis can't do PMP From: Piter PUNK SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 29f34d03bd75..6a4a2a25d97a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -90,6 +90,7 @@ enum { board_ahci_mv = 4, board_ahci_sb700 = 5, board_ahci_mcp65 = 6, + board_ahci_nopmp = 7, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_nopmp */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ - { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */ /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ -- cgit v1.2.3 From 74e23386b7818c7edb1252f6661806dd34042db1 Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_pcmcia.c | 1 + drivers/ide/legacy/ide-cs.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3d39f9dfec5a..c97bc0cd1e17 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index f633b6b3c7f3..655f43aa086f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -439,6 +439,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), -- cgit v1.2.3 From a17bf220231a5061a29a27a99a273246eb3b156e Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters Signed-off-by: Kristoffer Ericson CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_pcmcia.c | 1 + drivers/ide/legacy/ide-cs.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index c97bc0cd1e17..41b4361bbf6e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -425,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 655f43aa086f..7fde9b64e95f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -450,6 +450,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), -- cgit v1.2.3 From 70a3143af87c6ca188107cbd49ab5eec2c86c456 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 21 Jun 2008 16:07:32 +0900 Subject: sata_uli: hardreset is broken sata_uli can't do hardresets reliably and lock up. This went unnoticed till now as softreset was the default and hardreset was only used after softreset failed. Reported by Christian Casteyde in bz#10860. Signed-off-by: Tejun Heo Cc: Christian Casteyde Signed-off-by: Jeff Garzik --- drivers/ata/sata_uli.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index f277cea904ce..db529b849948 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -83,6 +83,7 @@ static struct ata_port_operations uli_ops = { .inherits = &ata_bmdma_port_ops, .scr_read = uli_scr_read, .scr_write = uli_scr_write, + .hardreset = ATA_OP_NULL, }; static const struct ata_port_info uli_port_info = { -- cgit v1.2.3 From 464b3286b4aa459059c6fda85ba55185fd21d9fc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Jul 2008 17:50:23 +0900 Subject: sata_sil24: add DID for another adaptec flavor There's another DID used for Adaptec card. Add it. Reported by Travis Read. Signed-off-by: Tejun Heo Cc: Travis Read Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 8ee6b5b4ede7..84ffcc26a74b 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -370,6 +370,7 @@ static const struct pci_device_id sil24_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 }, { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 }, + { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 }, { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 }, -- cgit v1.2.3 From ea0c62f7cf70f13a67830471b613337bd0c9a62e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 28 Jun 2008 01:49:02 +0900 Subject: ahci: always clear all bits in irq_stat Some AHCI controllers (ICH7 was reported) set pending bit in HOST_IRQ_STAT for non-existent ports and when it's not cleared falls into IRQ storm. Always clear full irq_stat instead of only the bits that are handled. As nothing changes for recognized ports, the risk of breaking things is pretty low. Reported and verified by Philipp Thomas in the following suse bugzilla. https://bugzilla.novell.com/attachment.cgi?id=215692 Signed-off-by: Tejun Heo Cc: Philipp Thomas Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6a4a2a25d97a..061817a3a0e5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; - u32 irq_stat, irq_ack = 0; + u32 irq_stat; VPRINTK("ENTER\n"); @@ -1809,14 +1809,11 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) "interrupt on disabled port %u\n", i); } - irq_ack |= (1 << i); - } - - if (irq_ack) { - writel(irq_ack, mmio + HOST_IRQ_STAT); handled = 1; } + writel(irq_stat, mmio + HOST_IRQ_STAT); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); -- cgit v1.2.3 From a836d3e882161c562b3ddacee5d8842a033c5b2c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 28 Jun 2008 01:39:43 +0900 Subject: libata-sff: improve HSM violation reporting Improve SFF HSM violation reporting such that each HSM violation can be distinguished using ehi_desc. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 215d18672a5a..c0908c225483 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1094,6 +1094,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, u8 status, int in_wq) { + struct ata_eh_info *ehi = &ap->link.eh_info; unsigned long flags = 0; int poll_next; @@ -1125,9 +1126,12 @@ fsm_start: if (likely(status & (ATA_ERR | ATA_DF))) /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else + else { /* HSM violation. Let EH handle this */ + ata_ehi_push_desc(ehi, + "ST_FIRST: !(DRQ|ERR|DF)"); qc->err_mask |= AC_ERR_HSM; + } ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1146,9 +1150,9 @@ fsm_start: * the CDB. */ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { - ata_port_printk(ap, KERN_WARNING, - "DRQ=1 with device error, " - "dev_stat 0x%X\n", status); + ata_ehi_push_desc(ehi, "ST_FIRST: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1205,9 +1209,9 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " - "device error, dev_stat 0x%X\n", - status); + ata_ehi_push_desc(ehi, "ST-ATAPI: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1226,13 +1230,17 @@ fsm_start: if (likely(status & (ATA_ERR | ATA_DF))) /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else + else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. */ + ata_ehi_push_desc(ehi, "ST-ATA: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; + } ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1257,8 +1265,12 @@ fsm_start: status = ata_wait_idle(ap); } - if (status & (ATA_BUSY | ATA_DRQ)) + if (status & (ATA_BUSY | ATA_DRQ)) { + ata_ehi_push_desc(ehi, "ST-ATA: " + "BUSY|DRQ persists on ERR|DF, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; + } /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state -- cgit v1.2.3 From c7843e8f565f624b0cff7cad1370fad4cb84dfbc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 21:57:42 -0400 Subject: sata_mv: safer logic for limit_warnings There is a miniscule chance that two separate host controllers might be in sata_mv at the same time and manage to decrement the static limit_warnings variable below zero. Fix the comparison to deal with it. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 28092bc50146..ad169ffbc4cb 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1607,7 +1607,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * Much of the time, this could just work regardless. * So for now, just log the incident, and allow the attempt. */ - if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) { --limit_warnings; ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME ": attempting PIO w/multiple DRQ: " -- cgit v1.2.3 From d28f87aa87ce8b196349d7c306a7e6fe3abd7155 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 5 Jul 2008 13:10:50 +0900 Subject: ahci: give another shot at clearing all bits in irq_stat Commit ea0c62f7cf70f13a67830471b613337bd0c9a62e tried to clear all bits in irq_stat but it didn't actually achieve that as irq_stat was anded with port_map right after read. This patch makes ahci driver always use the unmasked value to clear irq_status. While at it, add explanation on the peculiarities of ahci IRQ clearing. This was spotted by Linus Torvalds. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds --- drivers/ata/ahci.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 061817a3a0e5..5e6468a7ca4b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; - u32 irq_stat; + u32 irq_stat, irq_masked; VPRINTK("ENTER\n"); @@ -1786,16 +1786,17 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) /* sigh. 0xffffffff is a valid return from h/w */ irq_stat = readl(mmio + HOST_IRQ_STAT); - irq_stat &= hpriv->port_map; if (!irq_stat) return IRQ_NONE; + irq_masked = irq_stat & hpriv->port_map; + spin_lock(&host->lock); for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - if (!(irq_stat & (1 << i))) + if (!(irq_masked & (1 << i))) continue; ap = host->ports[i]; @@ -1812,6 +1813,15 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) handled = 1; } + /* HOST_IRQ_STAT behaves as level triggered latch meaning that + * it should be cleared after all the port events are cleared; + * otherwise, it will raise a spurious interrupt after each + * valid one. Please read section 10.6.2 of ahci 1.1 for more + * information. + * + * Also, use the unmasked value to clear interrupt as spurious + * pending event on a dummy port might cause screaming IRQ. + */ writel(irq_stat, mmio + HOST_IRQ_STAT); spin_unlock(&host->lock); -- cgit v1.2.3