From d9ae2bad5c92cd116e3daedf16f79cf597e09ad7 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Nov 2005 18:11:19 +1100 Subject: powerpc: make iSeries use generic virtual irq mapping Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/irq.c | 3 --- arch/powerpc/platforms/iseries/irq.c | 25 +++---------------------- 2 files changed, 3 insertions(+), 25 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 4b7940693f3d..5e5ed4441c69 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -311,7 +311,6 @@ void __init init_IRQ(void) } #ifdef CONFIG_PPC64 -#ifndef CONFIG_PPC_ISERIES /* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. */ @@ -420,8 +419,6 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) } -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS struct thread_info *softirq_ctx[NR_CPUS]; struct thread_info *hardirq_ctx[NR_CPUS]; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 01090e9ce0cf..a58daa153686 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -42,13 +42,6 @@ #include "irq.h" #include "call_pci.h" -/* This maps virtual irq numbers to real irqs */ -unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* The next available virtual irq number */ -/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ -static int next_virtual_irq = 2; - static long Pci_Interrupt_Count; static long Pci_Event_Count; @@ -350,26 +343,14 @@ static hw_irq_controller iSeries_IRQ_handler = { int __init iSeries_allocate_IRQ(HvBusNumber busNumber, HvSubBusNumber subBusNumber, HvAgentId deviceId) { - unsigned int realirq, virtirq; + int virtirq; + unsigned int realirq; u8 idsel = (deviceId >> 4); u8 function = deviceId & 7; - virtirq = next_virtual_irq++; realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; - virt_irq_to_real_map[virtirq] = realirq; + virtirq = virt_irq_create_mapping(realirq); irq_desc[virtirq].handler = &iSeries_IRQ_handler; return virtirq; } - -int virt_irq_create_mapping(unsigned int real_irq) -{ - BUG(); /* Don't call this on iSeries, yet */ - - return 0; -} - -void virt_irq_init(void) -{ - return; -} -- cgit v1.2.1 From 868accb7b9126dffdebb6b45631e145991e3535d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Nov 2005 18:38:46 +1100 Subject: powerpc: have only one definition of __irq_offset_value Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/irq.c | 6 +++++- arch/powerpc/kernel/setup_32.c | 4 ---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5e5ed4441c69..5a71ed9612fe 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -71,6 +71,11 @@ #include #endif +int __irq_offset_value; +#ifdef CONFIG_PPC32 +EXPORT_SYMBOL(__irq_offset_value); +#endif + static int ppc_spurious_interrupts; #if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) @@ -98,7 +103,6 @@ extern atomic_t ipi_sent; EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -int __irq_offset_value; u64 ppc64_interrupt_controller; #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index c98cfcc9cd9a..e5694335bf10 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -57,10 +57,6 @@ extern void power4_idle(void); boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -/* XXX should go elsewhere */ -int __irq_offset_value; -EXPORT_SYMBOL(__irq_offset_value); - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; -- cgit v1.2.1 From c5e24354efae9f962e0e369d875d45f47e0bb9aa Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sat, 12 Nov 2005 00:06:05 +1100 Subject: [PATCH] powerpc: Turn cpu_irq_down into kexec_cpu_down We currently have a ppc_md member called cpu_irq_down, which disables IRQs for the cpu in question. The only caller of cpu_irq_down is the kexec code. On pSeries we need to do more than just teardown IRQs at kexec time, so rename the ppc_md member to kexec_cpu_down and expand it. The pSeries code needs to know, and other platforms might too, whether we're doing a crash shutdown (ie. panicking) or a regular kexec, so add a flag for that. The pSeries implementation of kexec_cpu_down does an unregister VPA call, which tells the Hypervisor to stop writing stuff into our pacas. Without this we can get weird memory corruption bugs when we kexec, caused by the Hypervisor writing into the first kernel's pacas which happens to be somewhere interesting in the second kernel's memory. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 31990829310c..b9d9732b2e06 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -200,14 +200,12 @@ static void __init pSeries_setup_arch(void) if (ppc64_interrupt_controller == IC_OPEN_PIC) { ppc_md.init_IRQ = pSeries_init_mpic; ppc_md.get_irq = mpic_get_irq; - ppc_md.cpu_irq_down = mpic_teardown_this_cpu; /* Allocate the mpic now, so that find_and_init_phbs() can * fill the ISUs */ pSeries_setup_mpic(); } else { ppc_md.init_IRQ = xics_init_IRQ; ppc_md.get_irq = xics_get_irq; - ppc_md.cpu_irq_down = xics_teardown_cpu; } #ifdef CONFIG_SMP @@ -595,6 +593,27 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } +#ifdef CONFIG_KEXEC +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (!crash_shutdown) { + unsigned long vpa = __pa(&get_paca()->lppaca); + + if (unregister_vpa(hard_smp_processor_id(), vpa)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } + + if (ppc64_interrupt_controller == IC_OPEN_PIC) + mpic_teardown_this_cpu(secondary); + else + xics_teardown_cpu(secondary); +} +#endif + struct machdep_calls __initdata pSeries_md = { .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, @@ -617,4 +636,7 @@ struct machdep_calls __initdata pSeries_md = { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, +#ifdef CONFIG_KEXEC + .kexec_cpu_down = pseries_kexec_cpu_down, +#endif }; -- cgit v1.2.1 From 593e537b93193d1696809817533ce5ad510445b1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sat, 12 Nov 2005 00:06:06 +1100 Subject: [PATCH] powerpc: Export htab start/end via device tree The userspace kexec-tools need to know the location of the htab on non-lpar machines, as well as the end of the kernel. Export via the device tree. NB. This patch has been updated to use "linux,x" property names. You may need to update your kexec-tools to match. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index fdbd9f9122f2..608fee7c7e20 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -59,6 +59,7 @@ #include #include #include +#include #include "setup.h" @@ -415,6 +416,10 @@ void __init setup_system(void) */ unflatten_device_tree(); +#ifdef CONFIG_KEXEC + kexec_setup(); /* requires unflattened device tree. */ +#endif + /* * Fill the ppc64_caches & systemcfg structures with informations * retreived from the device-tree. Need to be called before -- cgit v1.2.1 From 50092b233afa96b4c9a4b24ac38199c34e0880cd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Nov 2005 11:02:20 +1100 Subject: [PATCH] powerpc: Always rebuild arch/powerpc/include/asm symlink This patch uses a FORCE dependency on the arch/powerpc/include/asm symlink so that it always gets rebuilt, thus avoiding all sort of funny errors if the .config is changed between 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 5bc11bd36c1f..d41ad2e675db 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -187,7 +187,7 @@ archprepare: checkbin # Temporary hack until we have migrated to asm-powerpc include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: +arch/$(ARCH)/include/asm: FORCE $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm -- cgit v1.2.1 From 0c37ec2aa88bd8a6aaeb284ff5c86f4c6d8e8469 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Nov 2005 14:55:58 +1100 Subject: [PATCH] powerpc: vdso fixes (take #2) This fixes various errors in the new functions added in the vDSO's, I've now verified all functions on both 32 and 64 bits vDSOs. It also fix a sign extension bug getting the initial time of day at boot that could cause the monotonic clock value to be completely on bogus for 64 bits applications (with either the vDSO or the syscall) on powermacs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/asm-offsets.c | 6 ++++-- arch/powerpc/kernel/vdso32/datapage.S | 3 ++- arch/powerpc/kernel/vdso32/gettimeofday.S | 12 ++++++++---- arch/powerpc/kernel/vdso64/datapage.S | 1 + arch/powerpc/kernel/vdso64/gettimeofday.S | 31 +++++++++++++++++++------------ arch/powerpc/platforms/powermac/time.c | 8 ++++---- 6 files changed, 38 insertions(+), 23 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4550eb4f4fbd..91538d2445bf 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -270,13 +270,15 @@ int main(void) DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); + DEFINE(TSPC64_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC64_TV_NSEC, offsetof(struct timespec, tv_nsec)); DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec)); DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec)); #else DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); - DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec)); - DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); + DEFINE(TSPC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); #endif /* timeval/timezone offsets for use by vdso */ DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index a08c26e87835..f6b38472318d 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -77,8 +77,9 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) mflr r12 .cfi_register lr,r12 bl __get_datapage@local - lwz r3,CFG_TB_TICKS_PER_SEC(r3) lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) + lwz r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index aeb5fc9b87b3..0a32a41d50b0 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -83,7 +83,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) /* Check for supported clock IDs */ cmpli cr0,r3,CLOCK_REALTIME cmpli cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f mflr r12 /* r12 saves lr */ @@ -91,7 +91,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mr r10,r3 /* r10 saves id */ mr r11,r4 /* r11 saves tp */ bl __get_datapage@local /* get data page */ - mr r9, r3 /* datapage ptr in r9 */ + mr r9,r3 /* datapage ptr in r9 */ beq cr1,50f /* if monotonic -> jump there */ /* @@ -173,10 +173,14 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) add r4,r4,r7 lis r5,NSEC_PER_SEC@h ori r5,r5,NSEC_PER_SEC@l - cmpli cr0,r4,r5 + cmpl cr0,r4,r5 + cmpli cr1,r4,0 blt 1f subf r4,r5,r4 addi r3,r3,1 +1: bge cr1,1f + addi r3,r3,-1 + add r4,r4,r5 1: stw r3,TSPC32_TV_SEC(r11) stw r4,TSPC32_TV_NSEC(r11) @@ -210,7 +214,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f li r3,0 diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index e67eda0f8cda..6393e4137bc7 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -80,5 +80,6 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) bl V_LOCAL_FUNC(__get_datapage) ld r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index d371c02a8c0e..1a89094715cc 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -1,4 +1,5 @@ -/* + + /* * Userland implementation of gettimeofday() for 64 bits processes in a * ppc64 kernel for use in the vDSO * @@ -68,7 +69,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f mflr r12 /* r12 saves lr */ @@ -84,16 +85,17 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ - ori r7,r7,0xca00 + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ std r5,TSPC64_TV_SEC(r11) /* store sec in tv */ subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / * XSEC_PER_SEC */ rldicl r0,r0,44,20 + mulli r0,r0,1000 /* nsec = usec * 1000 */ std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ mtlr r12 @@ -106,15 +108,16 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) 50: bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ - ori r7,r7,0xca00 + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / * XSEC_PER_SEC */ rldicl r6,r0,44,20 + mulli r6,r6,1000 /* nsec = usec * 1000 */ /* now we must fixup using wall to monotonic. We need to snapshot * that value and do the counter trick again. Fortunately, we still @@ -123,8 +126,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) * can be used */ - lwz r4,WTOM_CLOCK_SEC(r9) - lwz r7,WTOM_CLOCK_NSEC(r9) + lwa r4,WTOM_CLOCK_SEC(r3) + lwa r7,WTOM_CLOCK_NSEC(r3) /* We now have our result in r4,r7. We create a fake dependency * on that result and re-check the counter @@ -144,10 +147,14 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) add r7,r7,r6 lis r9,NSEC_PER_SEC@h ori r9,r9,NSEC_PER_SEC@l - cmpli cr0,r7,r9 + cmpl cr0,r7,r9 + cmpli cr1,r7,0 blt 1f subf r7,r9,r7 addi r4,r4,1 +1: bge cr1,1f + addi r4,r4,-1 + add r7,r7,r9 1: std r4,TSPC64_TV_SEC(r11) std r7,TSPC64_TV_NSEC(r11) @@ -181,7 +188,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f li r3,0 diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 5947b21a8588..4c7682a65227 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -102,7 +102,7 @@ static unsigned long from_rtc_time(struct rtc_time *tm) static unsigned long cuda_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) return 0; @@ -113,7 +113,7 @@ static unsigned long cuda_get_time(void) req.reply_len); now = (req.reply[3] << 24) + (req.reply[4] << 16) + (req.reply[5] << 8) + req.reply[6]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm)) @@ -146,7 +146,7 @@ static int cuda_set_rtc_time(struct rtc_time *tm) static unsigned long pmu_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) return 0; @@ -156,7 +156,7 @@ static unsigned long pmu_get_time(void) req.reply_len); now = (req.reply[0] << 24) + (req.reply[1] << 16) + (req.reply[2] << 8) + req.reply[3]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm)) -- cgit v1.2.1 From 3136254ca5dfaf53486f7032c674f9b6d7fd1d53 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Nov 2005 15:49:48 +1100 Subject: [PATCH] powerpc: kill ppc64 rtc.c, use genrtc instead This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/configs/pseries_defconfig | 206 +++++++++++++++++++++------------ arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/rtas-rtc.c | 105 +++++++++++++++++ arch/powerpc/platforms/powermac/time.c | 2 +- 4 files changed, 238 insertions(+), 77 deletions(-) create mode 100644 arch/powerpc/kernel/rtas-rtc.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 9f09dff9e11a..913962c1dae0 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 +# Linux kernel version: 2.6.15-rc1 +# Mon Nov 14 15:27:00 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 # # Code maturity level options @@ -68,75 +83,103 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y +# CONFIG_U3_DART is not set CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_NUMA=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -156,6 +199,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -197,6 +241,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -299,6 +347,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -368,14 +420,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -473,6 +517,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -559,6 +604,7 @@ CONFIG_DM_MULTIPATH_EMC=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -645,7 +691,6 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set # # Token Ring devices @@ -674,6 +719,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,6 +830,8 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -801,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=1024 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -852,6 +901,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -893,7 +943,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -905,6 +954,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -927,7 +977,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -936,6 +985,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -990,12 +1040,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,6 +1159,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1288,10 +1342,25 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1308,14 +1377,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1355,17 +1425,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9a74b7ab03a4..046b4bf1f21e 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_PPC_OF) += of_device.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64) := rtas_pci.o -obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y) +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c new file mode 100644 index 000000000000..7b948662704c --- /dev/null +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -0,0 +1,105 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define MAX_RTC_WAIT 5000 /* 5 sec */ +#define RTAS_CLOCK_BUSY (-2) +unsigned long __init rtas_get_boot_time(void) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + wait_time = rtas_extended_busy_delay_time(error); + /* This is boot time so we spin. */ + udelay(wait_time*1000); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return 0; + } + + return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); +} + +/* NOTE: get_rtc_time will get an error if executed in interrupt context + * and if a delay is needed to read the clock. In this case we just + * silently return without updating rtc_tm. + */ +void rtas_get_rtc_time(struct rtc_time *rtc_tm) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt() && printk_ratelimit()) { + memset(&rtc_tm, 0, sizeof(struct rtc_time)); + printk(KERN_WARNING "error: reading clock" + " would delay interrupt\n"); + return; /* delay not allowed */ + } + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return; + } + + rtc_tm->tm_sec = ret[5]; + rtc_tm->tm_min = ret[4]; + rtc_tm->tm_hour = ret[3]; + rtc_tm->tm_mday = ret[2]; + rtc_tm->tm_mon = ret[1] - 1; + rtc_tm->tm_year = ret[0] - 1900; +} + +int rtas_set_rtc_time(struct rtc_time *tm) +{ + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, + tm->tm_year + 1900, tm->tm_mon + 1, + tm->tm_mday, tm->tm_hour, tm->tm_min, + tm->tm_sec, 0); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt()) + return 1; /* probably decrementer */ + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) + printk(KERN_WARNING "error: setting the clock failed (%d)\n", + error); + + return 0; +} diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 4c7682a65227..b1714f9bd920 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -199,7 +199,7 @@ static unsigned long smu_get_time(void) #define smu_set_rtc_time(tm, spin) 0 #endif -unsigned long pmac_get_boot_time(void) +unsigned long __init pmac_get_boot_time(void) { /* Get the time from the RTC, used only at boot time */ switch (sys_ctrler) { -- cgit v1.2.1 From d7867959e7e928ab52ef204e2559937e5c9fc4ce Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 14 Nov 2005 17:14:51 +1100 Subject: powerpc: iSeries build fixes log_plpar_hcall_return is only used on PPC_PSERIES, so move it closer to its users and inside ifdef CONFIG_PPC_PSERIES. remove the last vestiges of systemcfg in iSeries. Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/lparcfg.c | 51 +++++++++++++++++----------------- arch/powerpc/platforms/iseries/setup.c | 6 ---- 2 files changed, 25 insertions(+), 32 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1b3ba8a440a6..9dda16ccde78 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -42,32 +42,6 @@ /* #define LPARCFG_DEBUG */ -/* find a better place for this function... */ -static void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - if (rc == 0) /* success, return */ - return; -/* check for null tag ? */ - if (rc == H_Hardware) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_Function) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_Authority) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this function\n", - tag); - else if (rc == H_Parameter) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - -} - static struct proc_dir_entry *proc_ppc64_lparcfg; #define LPARCFG_BUFF_SIZE 4096 @@ -172,6 +146,31 @@ static int lparcfg_data(struct seq_file *m, void *v) /* * Methods used to fetch LPAR data when running on a pSeries platform. */ +/* find a better place for this function... */ +static void log_plpar_hcall_return(unsigned long rc, char *tag) +{ + if (rc == 0) /* success, return */ + return; +/* check for null tag ? */ + if (rc == H_Hardware) + printk(KERN_INFO + "plpar-hcall (%s) failed with hardware fault\n", tag); + else if (rc == H_Function) + printk(KERN_INFO + "plpar-hcall (%s) failed; function not allowed\n", tag); + else if (rc == H_Authority) + printk(KERN_INFO + "plpar-hcall (%s) failed; not authorized to this function\n", + tag); + else if (rc == H_Parameter) + printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", + tag); + else + printk(KERN_INFO + "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", + tag, rc); + +} /* * H_GET_PPP hcall returns info in 4 parms. diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 6a29f301436b..da26639190db 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -548,8 +547,6 @@ static unsigned long __init build_iSeries_Memory_Map(void) */ static void __init iSeries_setup_arch(void) { - unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index; - if (get_paca()->lppaca.shared_proc) { ppc_md.idle_loop = iseries_shared_idle; printk(KERN_INFO "Using shared processor idle loop\n"); @@ -565,9 +562,6 @@ static void __init iSeries_setup_arch(void) itVpdAreas.xSlicMaxLogicalProcs); printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - - _systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", _systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) -- cgit v1.2.1 From 7568cb4ef6c507164b65b01f972a3bd026898ae1 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 17:30:17 +1100 Subject: powerpc: Move most remaining ppc64 files over to arch/powerpc Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/kernel/Makefile | 18 +- arch/powerpc/kernel/dma_64.c | 151 ++++ arch/powerpc/kernel/iomap.c | 146 +++ arch/powerpc/kernel/iommu.c | 572 ++++++++++++ arch/powerpc/kernel/kprobes.c | 459 ++++++++++ arch/powerpc/kernel/machine_kexec_64.c | 358 ++++++++ arch/powerpc/kernel/module_64.c | 455 ++++++++++ arch/powerpc/kernel/pci_64.c | 1319 ++++++++++++++++++++++++++++ arch/powerpc/kernel/pci_direct_iommu.c | 94 ++ arch/powerpc/kernel/pci_dn.c | 230 +++++ arch/powerpc/kernel/pci_iommu.c | 128 +++ arch/powerpc/platforms/pseries/Makefile | 5 +- arch/powerpc/platforms/pseries/hvconsole.c | 74 ++ arch/powerpc/platforms/pseries/hvcserver.c | 251 ++++++ 15 files changed, 4255 insertions(+), 6 deletions(-) create mode 100644 arch/powerpc/kernel/dma_64.c create mode 100644 arch/powerpc/kernel/iomap.c create mode 100644 arch/powerpc/kernel/iommu.c create mode 100644 arch/powerpc/kernel/kprobes.c create mode 100644 arch/powerpc/kernel/machine_kexec_64.c create mode 100644 arch/powerpc/kernel/module_64.c create mode 100644 arch/powerpc/kernel/pci_64.c create mode 100644 arch/powerpc/kernel/pci_direct_iommu.c create mode 100644 arch/powerpc/kernel/pci_dn.c create mode 100644 arch/powerpc/kernel/pci_iommu.c create mode 100644 arch/powerpc/platforms/pseries/hvconsole.c create mode 100644 arch/powerpc/platforms/pseries/hvcserver.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c523029674e6..c5c3f4213cd9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -932,6 +932,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on PPC64 help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 046b4bf1f21e..4970e3721a84 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -49,12 +49,23 @@ extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ prom.o traps.o setup-common.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o -obj-$(CONFIG_PPC64) += misc_64.o +obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_KPROBES) += kprobes.o + +module-$(CONFIG_PPC64) += module_64.o +obj-$(CONFIG_MODULES) += $(module-y) + +pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ + pci_direct_iommu.o iomap.o +obj-$(CONFIG_PCI) += $(pci64-y) + +kexec64-$(CONFIG_PPC64) += machine_kexec_64.o +obj-$(CONFIG_KEXEC) += $(kexec64-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -62,11 +73,8 @@ AFLAGS_head_64.o += -I$(obj) endif else -# stuff used from here for ARCH=ppc or ARCH=ppc64 +# stuff used from here for ARCH=ppc smpobj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o $(smpobj-y) - endif diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c new file mode 100644 index 000000000000..7c3419656ccc --- /dev/null +++ b/arch/powerpc/kernel/dma_64.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2004 IBM Corporation + * + * Implements the generic device dma API for ppc64. Handles + * the pci and vio busses + */ + +#include +#include +/* Include the busses we support */ +#include +#include +#include +#include + +static struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return &pci_dma_ops; +#endif +#ifdef CONFIG_IBMVIO + if (dev->bus == &vio_bus_type) + return &vio_dma_ops; +#endif + return NULL; +} + +int dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->dma_supported(dev, mask); + BUG(); + return 0; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 dma_mask) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +#endif +#ifdef CONFIG_IBMVIO + if (dev->bus == &vio_bus_type) + return -EIO; +#endif /* CONFIG_IBMVIO */ + BUG(); + return 0; +} +EXPORT_SYMBOL(dma_set_mask); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); + BUG(); + return NULL; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); + else + BUG(); +} +EXPORT_SYMBOL(dma_free_coherent); + +dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->map_single(dev, cpu_addr, size, direction); + BUG(); + return (dma_addr_t)0; +} +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->unmap_single(dev, dma_addr, size, direction); + else + BUG(); +} +EXPORT_SYMBOL(dma_unmap_single); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->map_single(dev, + (page_address(page) + offset), size, direction); + BUG(); + return (dma_addr_t)0; +} +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->unmap_single(dev, dma_address, size, direction); + else + BUG(); +} +EXPORT_SYMBOL(dma_unmap_page); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->map_sg(dev, sg, nents, direction); + BUG(); + return 0; +} +EXPORT_SYMBOL(dma_map_sg); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->unmap_sg(dev, sg, nhwentries, direction); + else + BUG(); +} +EXPORT_SYMBOL(dma_unmap_sg); diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c new file mode 100644 index 000000000000..6160c8dbb7c5 --- /dev/null +++ b/arch/powerpc/kernel/iomap.c @@ -0,0 +1,146 @@ +/* + * arch/ppc64/kernel/iomap.c + * + * ppc64 "iomap" interface implementation. + * + * (C) Copyright 2004 Linus Torvalds + */ +#include +#include +#include +#include + +/* + * Here comes the ppc64 implementation of the IOMAP + * interfaces. + */ +unsigned int fastcall ioread8(void __iomem *addr) +{ + return readb(addr); +} +unsigned int fastcall ioread16(void __iomem *addr) +{ + return readw(addr); +} +unsigned int fastcall ioread16be(void __iomem *addr) +{ + return in_be16(addr); +} +unsigned int fastcall ioread32(void __iomem *addr) +{ + return readl(addr); +} +unsigned int fastcall ioread32be(void __iomem *addr) +{ + return in_be32(addr); +} +EXPORT_SYMBOL(ioread8); +EXPORT_SYMBOL(ioread16); +EXPORT_SYMBOL(ioread16be); +EXPORT_SYMBOL(ioread32); +EXPORT_SYMBOL(ioread32be); + +void fastcall iowrite8(u8 val, void __iomem *addr) +{ + writeb(val, addr); +} +void fastcall iowrite16(u16 val, void __iomem *addr) +{ + writew(val, addr); +} +void fastcall iowrite16be(u16 val, void __iomem *addr) +{ + out_be16(addr, val); +} +void fastcall iowrite32(u32 val, void __iomem *addr) +{ + writel(val, addr); +} +void fastcall iowrite32be(u32 val, void __iomem *addr) +{ + out_be32(addr, val); +} +EXPORT_SYMBOL(iowrite8); +EXPORT_SYMBOL(iowrite16); +EXPORT_SYMBOL(iowrite16be); +EXPORT_SYMBOL(iowrite32); +EXPORT_SYMBOL(iowrite32be); + +/* + * These are the "repeat read/write" functions. Note the + * non-CPU byte order. We do things in "IO byteorder" + * here. + * + * FIXME! We could make these do EEH handling if we really + * wanted. Not clear if we do. + */ +void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) +{ + _insb((u8 __iomem *) addr, dst, count); +} +void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) +{ + _insw_ns((u16 __iomem *) addr, dst, count); +} +void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) +{ + _insl_ns((u32 __iomem *) addr, dst, count); +} +EXPORT_SYMBOL(ioread8_rep); +EXPORT_SYMBOL(ioread16_rep); +EXPORT_SYMBOL(ioread32_rep); + +void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) +{ + _outsb((u8 __iomem *) addr, src, count); +} +void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) +{ + _outsw_ns((u16 __iomem *) addr, src, count); +} +void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) +{ + _outsl_ns((u32 __iomem *) addr, src, count); +} +EXPORT_SYMBOL(iowrite8_rep); +EXPORT_SYMBOL(iowrite16_rep); +EXPORT_SYMBOL(iowrite32_rep); + +void __iomem *ioport_map(unsigned long port, unsigned int len) +{ + if (!_IO_IS_VALID(port)) + return NULL; + return (void __iomem *) (port+pci_io_base); +} + +void ioport_unmap(void __iomem *addr) +{ + /* Nothing to do */ +} +EXPORT_SYMBOL(ioport_map); +EXPORT_SYMBOL(ioport_unmap); + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len) + return NULL; + if (max && len > max) + len = max; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + /* What? */ + return NULL; +} + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + /* Nothing to do */ +} +EXPORT_SYMBOL(pci_iomap); +EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c new file mode 100644 index 000000000000..4d9b4388918b --- /dev/null +++ b/arch/powerpc/kernel/iommu.c @@ -0,0 +1,572 @@ +/* + * arch/ppc64/kernel/iommu.c + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * + * Rewrite, cleanup, new allocation schemes, virtual merging: + * Copyright (C) 2004 Olof Johansson, IBM Corporation + * and Ben. Herrenschmidt, IBM Corporation + * + * Dynamic DMA mapping support, bus-independent parts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DBG(...) + +#ifdef CONFIG_IOMMU_VMERGE +static int novmerge = 0; +#else +static int novmerge = 1; +#endif + +static int __init setup_iommu(char *str) +{ + if (!strcmp(str, "novmerge")) + novmerge = 1; + else if (!strcmp(str, "vmerge")) + novmerge = 0; + return 1; +} + +__setup("iommu=", setup_iommu); + +static unsigned long iommu_range_alloc(struct iommu_table *tbl, + unsigned long npages, + unsigned long *handle, + unsigned int align_order) +{ + unsigned long n, end, i, start; + unsigned long limit; + int largealloc = npages > 15; + int pass = 0; + unsigned long align_mask; + + align_mask = 0xffffffffffffffffl >> (64 - align_order); + + /* This allocator was derived from x86_64's bit string search */ + + /* Sanity check */ + if (unlikely(npages) == 0) { + if (printk_ratelimit()) + WARN_ON(1); + return DMA_ERROR_CODE; + } + + if (handle && *handle) + start = *handle; + else + start = largealloc ? tbl->it_largehint : tbl->it_hint; + + /* Use only half of the table for small allocs (15 pages or less) */ + limit = largealloc ? tbl->it_size : tbl->it_halfpoint; + + if (largealloc && start < tbl->it_halfpoint) + start = tbl->it_halfpoint; + + /* The case below can happen if we have a small segment appended + * to a large, or when the previous alloc was at the very end of + * the available space. If so, go back to the initial start. + */ + if (start >= limit) + start = largealloc ? tbl->it_largehint : tbl->it_hint; + + again: + + n = find_next_zero_bit(tbl->it_map, limit, start); + + /* Align allocation */ + n = (n + align_mask) & ~align_mask; + + end = n + npages; + + if (unlikely(end >= limit)) { + if (likely(pass < 2)) { + /* First failure, just rescan the half of the table. + * Second failure, rescan the other half of the table. + */ + start = (largealloc ^ pass) ? tbl->it_halfpoint : 0; + limit = pass ? tbl->it_size : limit; + pass++; + goto again; + } else { + /* Third failure, give up */ + return DMA_ERROR_CODE; + } + } + + for (i = n; i < end; i++) + if (test_bit(i, tbl->it_map)) { + start = i+1; + goto again; + } + + for (i = n; i < end; i++) + __set_bit(i, tbl->it_map); + + /* Bump the hint to a new block for small allocs. */ + if (largealloc) { + /* Don't bump to new block to avoid fragmentation */ + tbl->it_largehint = end; + } else { + /* Overflow will be taken care of at the next allocation */ + tbl->it_hint = (end + tbl->it_blocksize - 1) & + ~(tbl->it_blocksize - 1); + } + + /* Update handle for SG allocations */ + if (handle) + *handle = end; + + return n; +} + +static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page, + unsigned int npages, enum dma_data_direction direction, + unsigned int align_order) +{ + unsigned long entry, flags; + dma_addr_t ret = DMA_ERROR_CODE; + + spin_lock_irqsave(&(tbl->it_lock), flags); + + entry = iommu_range_alloc(tbl, npages, NULL, align_order); + + if (unlikely(entry == DMA_ERROR_CODE)) { + spin_unlock_irqrestore(&(tbl->it_lock), flags); + return DMA_ERROR_CODE; + } + + entry += tbl->it_offset; /* Offset into real TCE table */ + ret = entry << PAGE_SHIFT; /* Set the return dma address */ + + /* Put the TCEs in the HW table */ + ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & PAGE_MASK, + direction); + + + /* Flush/invalidate TLB caches if necessary */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); + + /* Make sure updates are seen by hardware */ + mb(); + + return ret; +} + +static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, + unsigned int npages) +{ + unsigned long entry, free_entry; + unsigned long i; + + entry = dma_addr >> PAGE_SHIFT; + free_entry = entry - tbl->it_offset; + + if (((free_entry + npages) > tbl->it_size) || + (entry < tbl->it_offset)) { + if (printk_ratelimit()) { + printk(KERN_INFO "iommu_free: invalid entry\n"); + printk(KERN_INFO "\tentry = 0x%lx\n", entry); + printk(KERN_INFO "\tdma_addr = 0x%lx\n", (u64)dma_addr); + printk(KERN_INFO "\tTable = 0x%lx\n", (u64)tbl); + printk(KERN_INFO "\tbus# = 0x%lx\n", (u64)tbl->it_busno); + printk(KERN_INFO "\tsize = 0x%lx\n", (u64)tbl->it_size); + printk(KERN_INFO "\tstartOff = 0x%lx\n", (u64)tbl->it_offset); + printk(KERN_INFO "\tindex = 0x%lx\n", (u64)tbl->it_index); + WARN_ON(1); + } + return; + } + + ppc_md.tce_free(tbl, entry, npages); + + for (i = 0; i < npages; i++) + __clear_bit(free_entry+i, tbl->it_map); +} + +static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, + unsigned int npages) +{ + unsigned long flags; + + spin_lock_irqsave(&(tbl->it_lock), flags); + + __iommu_free(tbl, dma_addr, npages); + + /* Make sure TLB cache is flushed if the HW needs it. We do + * not do an mb() here on purpose, it is not needed on any of + * the current platforms. + */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); +} + +int iommu_map_sg(struct device *dev, struct iommu_table *tbl, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction) +{ + dma_addr_t dma_next = 0, dma_addr; + unsigned long flags; + struct scatterlist *s, *outs, *segstart; + int outcount, incount; + unsigned long handle; + + BUG_ON(direction == DMA_NONE); + + if ((nelems == 0) || !tbl) + return 0; + + outs = s = segstart = &sglist[0]; + outcount = 1; + incount = nelems; + handle = 0; + + /* Init first segment length for backout at failure */ + outs->dma_length = 0; + + DBG("mapping %d elements:\n", nelems); + + spin_lock_irqsave(&(tbl->it_lock), flags); + + for (s = outs; nelems; nelems--, s++) { + unsigned long vaddr, npages, entry, slen; + + slen = s->length; + /* Sanity check */ + if (slen == 0) { + dma_next = 0; + continue; + } + /* Allocate iommu entries for that segment */ + vaddr = (unsigned long)page_address(s->page) + s->offset; + npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK); + npages >>= PAGE_SHIFT; + entry = iommu_range_alloc(tbl, npages, &handle, 0); + + DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); + + /* Handle failure */ + if (unlikely(entry == DMA_ERROR_CODE)) { + if (printk_ratelimit()) + printk(KERN_INFO "iommu_alloc failed, tbl %p vaddr %lx" + " npages %lx\n", tbl, vaddr, npages); + goto failure; + } + + /* Convert entry to a dma_addr_t */ + entry += tbl->it_offset; + dma_addr = entry << PAGE_SHIFT; + dma_addr |= s->offset; + + DBG(" - %lx pages, entry: %lx, dma_addr: %lx\n", + npages, entry, dma_addr); + + /* Insert into HW table */ + ppc_md.tce_build(tbl, entry, npages, vaddr & PAGE_MASK, direction); + + /* If we are in an open segment, try merging */ + if (segstart != s) { + DBG(" - trying merge...\n"); + /* We cannot merge if: + * - allocated dma_addr isn't contiguous to previous allocation + */ + if (novmerge || (dma_addr != dma_next)) { + /* Can't merge: create a new segment */ + segstart = s; + outcount++; outs++; + DBG(" can't merge, new segment.\n"); + } else { + outs->dma_length += s->length; + DBG(" merged, new len: %lx\n", outs->dma_length); + } + } + + if (segstart == s) { + /* This is a new segment, fill entries */ + DBG(" - filling new segment.\n"); + outs->dma_address = dma_addr; + outs->dma_length = slen; + } + + /* Calculate next page pointer for contiguous check */ + dma_next = dma_addr + slen; + + DBG(" - dma next is: %lx\n", dma_next); + } + + /* Flush/invalidate TLB caches if necessary */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); + + /* Make sure updates are seen by hardware */ + mb(); + + DBG("mapped %d elements:\n", outcount); + + /* For the sake of iommu_unmap_sg, we clear out the length in the + * next entry of the sglist if we didn't fill the list completely + */ + if (outcount < incount) { + outs++; + outs->dma_address = DMA_ERROR_CODE; + outs->dma_length = 0; + } + return outcount; + + failure: + for (s = &sglist[0]; s <= outs; s++) { + if (s->dma_length != 0) { + unsigned long vaddr, npages; + + vaddr = s->dma_address & PAGE_MASK; + npages = (PAGE_ALIGN(s->dma_address + s->dma_length) - vaddr) + >> PAGE_SHIFT; + __iommu_free(tbl, vaddr, npages); + } + } + spin_unlock_irqrestore(&(tbl->it_lock), flags); + return 0; +} + + +void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + unsigned long flags; + + BUG_ON(direction == DMA_NONE); + + if (!tbl) + return; + + spin_lock_irqsave(&(tbl->it_lock), flags); + + while (nelems--) { + unsigned int npages; + dma_addr_t dma_handle = sglist->dma_address; + + if (sglist->dma_length == 0) + break; + npages = (PAGE_ALIGN(dma_handle + sglist->dma_length) + - (dma_handle & PAGE_MASK)) >> PAGE_SHIFT; + __iommu_free(tbl, dma_handle, npages); + sglist++; + } + + /* Flush/invalidate TLBs if necessary. As for iommu_free(), we + * do not do an mb() here, the affected platforms do not need it + * when freeing. + */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); +} + +/* + * Build a iommu_table structure. This contains a bit map which + * is used to manage allocation of the tce space. + */ +struct iommu_table *iommu_init_table(struct iommu_table *tbl) +{ + unsigned long sz; + static int welcomed = 0; + + /* Set aside 1/4 of the table for large allocations. */ + tbl->it_halfpoint = tbl->it_size * 3 / 4; + + /* number of bytes needed for the bitmap */ + sz = (tbl->it_size + 7) >> 3; + + tbl->it_map = (unsigned long *)__get_free_pages(GFP_ATOMIC, get_order(sz)); + if (!tbl->it_map) + panic("iommu_init_table: Can't allocate %ld bytes\n", sz); + + memset(tbl->it_map, 0, sz); + + tbl->it_hint = 0; + tbl->it_largehint = tbl->it_halfpoint; + spin_lock_init(&tbl->it_lock); + + /* Clear the hardware table in case firmware left allocations in it */ + ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); + + if (!welcomed) { + printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", + novmerge ? "disabled" : "enabled"); + welcomed = 1; + } + + return tbl; +} + +void iommu_free_table(struct device_node *dn) +{ + struct pci_dn *pdn = dn->data; + struct iommu_table *tbl = pdn->iommu_table; + unsigned long bitmap_sz, i; + unsigned int order; + + if (!tbl || !tbl->it_map) { + printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__, + dn->full_name); + return; + } + + /* verify that table contains no entries */ + /* it_size is in entries, and we're examining 64 at a time */ + for (i = 0; i < (tbl->it_size/64); i++) { + if (tbl->it_map[i] != 0) { + printk(KERN_WARNING "%s: Unexpected TCEs for %s\n", + __FUNCTION__, dn->full_name); + break; + } + } + + /* calculate bitmap size in bytes */ + bitmap_sz = (tbl->it_size + 7) / 8; + + /* free bitmap */ + order = get_order(bitmap_sz); + free_pages((unsigned long) tbl->it_map, order); + + /* free table */ + kfree(tbl); +} + +/* Creates TCEs for a user provided buffer. The user buffer must be + * contiguous real kernel storage (not vmalloc). The address of the buffer + * passed here is the kernel (virtual) address of the buffer. The buffer + * need not be page aligned, the dma_addr_t returned will point to the same + * byte within the page as vaddr. + */ +dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, + size_t size, enum dma_data_direction direction) +{ + dma_addr_t dma_handle = DMA_ERROR_CODE; + unsigned long uaddr; + unsigned int npages; + + BUG_ON(direction == DMA_NONE); + + uaddr = (unsigned long)vaddr; + npages = PAGE_ALIGN(uaddr + size) - (uaddr & PAGE_MASK); + npages >>= PAGE_SHIFT; + + if (tbl) { + dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0); + if (dma_handle == DMA_ERROR_CODE) { + if (printk_ratelimit()) { + printk(KERN_INFO "iommu_alloc failed, " + "tbl %p vaddr %p npages %d\n", + tbl, vaddr, npages); + } + } else + dma_handle |= (uaddr & ~PAGE_MASK); + } + + return dma_handle; +} + +void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (tbl) + iommu_free(tbl, dma_handle, (PAGE_ALIGN(dma_handle + size) - + (dma_handle & PAGE_MASK)) >> PAGE_SHIFT); +} + +/* Allocates a contiguous real buffer and creates mappings over it. + * Returns the virtual address of the buffer and sets dma_handle + * to the dma address (mapping) of the first page. + */ +void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret = NULL; + dma_addr_t mapping; + unsigned int npages, order; + + size = PAGE_ALIGN(size); + npages = size >> PAGE_SHIFT; + order = get_order(size); + + /* + * Client asked for way too much space. This is checked later + * anyway. It is easier to debug here for the drivers than in + * the tce tables. + */ + if (order >= IOMAP_MAX_ORDER) { + printk("iommu_alloc_consistent size too large: 0x%lx\n", size); + return NULL; + } + + if (!tbl) + return NULL; + + /* Alloc enough pages (and possibly more) */ + ret = (void *)__get_free_pages(flag, order); + if (!ret) + return NULL; + memset(ret, 0, size); + + /* Set up tces to cover the allocated range */ + mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order); + if (mapping == DMA_ERROR_CODE) { + free_pages((unsigned long)ret, order); + ret = NULL; + } else + *dma_handle = mapping; + return ret; +} + +void iommu_free_coherent(struct iommu_table *tbl, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + unsigned int npages; + + if (tbl) { + size = PAGE_ALIGN(size); + npages = size >> PAGE_SHIFT; + iommu_free(tbl, dma_handle, npages); + free_pages((unsigned long)vaddr, get_order(size)); + } +} diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c new file mode 100644 index 000000000000..511af54e6230 --- /dev/null +++ b/arch/powerpc/kernel/kprobes.c @@ -0,0 +1,459 @@ +/* + * Kernel Probes (KProbes) + * arch/ppc64/kernel/kprobes.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S Kernel + * Probes initial implementation ( includes contributions from + * Rusty Russell). + * 2004-July Suparna Bhattacharya added jumper probes + * interface to access function arguments. + * 2004-Nov Ananth N Mavinakayanahalli kprobes port + * for PPC64 + */ + +#include +#include +#include +#include +#include +#include +#include + +static DECLARE_MUTEX(kprobe_mutex); +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + int ret = 0; + kprobe_opcode_t insn = *p->addr; + + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + + /* insn must be on a special executable page on ppc64 */ + if (!ret) { + down(&kprobe_mutex); + p->ainsn.insn = get_insn_slot(); + up(&kprobe_mutex); + if (!p->ainsn.insn) + ret = -ENOMEM; + } + return ret; +} + +void __kprobes arch_copy_kprobe(struct kprobe *p) +{ + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + down(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + up(&kprobe_mutex); +} + +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = *p->ainsn.insn; + + regs->msr |= MSR_SE; + + /* single step inline if it is a trap variant */ + if (is_trap(insn)) + regs->nip = (unsigned long)p->addr; + else + regs->nip = (unsigned long)p->ainsn.insn; +} + +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; +} + +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_msr = regs->msr; +} + +/* Called with kretprobe_lock held */ +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) +{ + struct kretprobe_instance *ri; + + if ((ri = get_free_rp_inst(rp)) != NULL) { + ri->rp = rp; + ri->task = current; + ri->ret_addr = (kprobe_opcode_t *)regs->link; + + /* Replace the return addr with trampoline addr */ + regs->link = (unsigned long)kretprobe_trampoline; + add_rp_inst(ri); + } else { + rp->nmissed++; + } +} + +static inline int kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + int ret = 0; + unsigned int *addr = (unsigned int *)regs->nip; + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); + + /* Check we're not actually recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + kprobe_opcode_t insn = *p->ainsn.insn; + if (kcb->kprobe_status == KPROBE_HIT_SS && + is_trap(insn)) { + regs->msr &= ~MSR_SE; + regs->msr |= kcb->kprobe_saved_msr; + goto no_kprobe; + } + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_saved_msr = regs->msr; + p->nmissed++; + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + return 1; + } else { + p = __get_cpu_var(current_kprobe); + if (p->break_handler && p->break_handler(p, regs)) { + goto ss_probe; + } + } + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) { + if (*addr != BREAKPOINT_INSTRUCTION) { + /* + * PowerPC has multiple variants of the "trap" + * instruction. If the current instruction is a + * trap variant, it could belong to someone else + */ + kprobe_opcode_t cur_insn = *addr; + if (is_trap(cur_insn)) + goto no_kprobe; + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + } + /* Not one of ours: let kernel handle it */ + goto no_kprobe; + } + + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); + if (p->pre_handler && p->pre_handler(p, regs)) + /* handler has already set things up, so skip ss setup */ + return 1; + +ss_probe: + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_HIT_SS; + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; +} + +/* + * Function return probe trampoline: + * - init_kprobes() establishes a probepoint here + * - When the probed function returns, this probe + * causes the handlers to fire + */ +void kretprobe_trampoline_holder(void) +{ + asm volatile(".global kretprobe_trampoline\n" + "kretprobe_trampoline:\n" + "nop\n"); +} + +/* + * Called when the probe at kretprobe trampoline is hit + */ +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head; + struct hlist_node *node, *tmp; + unsigned long flags, orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + regs->nip = orig_ret_address; + + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); + preempt_enable_no_resched(); + + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "breakpoint" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + */ +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +{ + int ret; + unsigned int insn = *p->ainsn.insn; + + regs->nip = (unsigned long)p->addr; + ret = emulate_step(regs, insn); + if (ret == 0) + regs->nip = (unsigned long)p->addr + 4; +} + +static inline int post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs); + regs->msr |= kcb->kprobe_saved_msr; + + /*Restore back the original saved kprobes variables and continue. */ + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + reset_current_kprobe(); +out: + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, msr + * will have SE set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (regs->msr & MSR_SE) + return 0; + + return 1; +} + +static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + regs->msr &= ~MSR_SE; + regs->msr |= kcb->kprobe_saved_msr; + + reset_current_kprobe(); + preempt_enable_no_resched(); + } + return 0; +} + +/* + * Wrapper routine to for handling exceptions. + */ +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_BPT: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_SSTEP: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); + break; + default: + break; + } + return ret; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); + + /* setup return addr to the jprobe handler routine */ + regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); + regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc); + + return 1; +} + +void __kprobes jprobe_return(void) +{ + asm volatile("trap" ::: "memory"); +} + +void __kprobes jprobe_return_end(void) +{ +}; + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + /* + * FIXME - we should ideally be validating that we got here 'cos + * of the "trap" in jprobe_return() above, before restoring the + * saved regs... + */ + memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + preempt_enable_no_resched(); + return 1; +} + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c new file mode 100644 index 000000000000..97c51e452be7 --- /dev/null +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -0,0 +1,358 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * + * Copyright (C) 2004-2005, IBM Corp. + * + * Created by: Milton D Miller II + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include /* _end */ +#include +#include + +#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ + +/* Have this around till we move it into crash specific file */ +note_buf_t crash_notes[NR_CPUS]; + +/* Dummy for now. Not sure if we need to have a crash shutdown in here + * and if what it will achieve. Letting it be now to compile the code + * in generic kexec environment + */ +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* do nothing right now */ + /* smp_relase_cpus() if we want smp on panic kernel */ + /* cpu_irq_down to isolate us until we are ready */ +} + +int machine_kexec_prepare(struct kimage *image) +{ + int i; + unsigned long begin, end; /* limits of segment */ + unsigned long low, high; /* limits of blocked memory range */ + struct device_node *node; + unsigned long *basep; + unsigned int *sizep; + + if (!ppc_md.hpte_clear_all) + return -ENOENT; + + /* + * Since we use the kernel fault handlers and paging code to + * handle the virtual mode, we must make sure no destination + * overlaps kernel static data or bss. + */ + for (i = 0; i < image->nr_segments; i++) + if (image->segment[i].mem < __pa(_end)) + return -ETXTBSY; + + /* + * For non-LPAR, we absolutely can not overwrite the mmu hash + * table, since we are still using the bolted entries in it to + * do the copy. Check that here. + * + * It is safe if the end is below the start of the blocked + * region (end <= low), or if the beginning is after the + * end of the blocked region (begin >= high). Use the + * boolean identity !(a || b) === (!a && !b). + */ + if (htab_address) { + low = __pa(htab_address); + high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + /* We also should not overwrite the tce tables */ + for (node = of_find_node_by_type(NULL, "pci"); node != NULL; + node = of_find_node_by_type(node, "pci")) { + basep = (unsigned long *)get_property(node, "linux,tce-base", + NULL); + sizep = (unsigned int *)get_property(node, "linux,tce-size", + NULL); + if (basep == NULL || sizep == NULL) + continue; + + low = *basep; + high = low + (*sizep); + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + /* we do nothing in prepare that needs to be undone */ +} + +#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE) + +static void copy_segments(unsigned long ind) +{ + unsigned long entry; + unsigned long *ptr; + void *dest; + void *addr; + + /* + * We rely on kexec_load to create a lists that properly + * initializes these pointers before they are used. + * We will still crash if the list is wrong, but at least + * the compiler will be quiet. + */ + ptr = NULL; + dest = NULL; + + for (entry = ind; !(entry & IND_DONE); entry = *ptr++) { + addr = __va(entry & PAGE_MASK); + + switch (entry & IND_FLAGS) { + case IND_DESTINATION: + dest = addr; + break; + case IND_INDIRECTION: + ptr = addr; + break; + case IND_SOURCE: + copy_page(dest, addr); + dest += PAGE_SIZE; + } + } +} + +void kexec_copy_flush(struct kimage *image) +{ + long i, nr_segments = image->nr_segments; + struct kexec_segment ranges[KEXEC_SEGMENT_MAX]; + + /* save the ranges on the stack to efficiently flush the icache */ + memcpy(ranges, image->segment, sizeof(ranges)); + + /* + * After this call we may not use anything allocated in dynamic + * memory, including *image. + * + * Only globals and the stack are allowed. + */ + copy_segments(image->head); + + /* + * we need to clear the icache for all dest pages sometime, + * including ones that were in place on the original copy + */ + for (i = 0; i < nr_segments; i++) + flush_icache_range(ranges[i].mem + KERNELBASE, + ranges[i].mem + KERNELBASE + + ranges[i].memsz); +} + +#ifdef CONFIG_SMP + +/* FIXME: we should schedule this function to be called on all cpus based + * on calling the interrupts, but we would like to call it off irq level + * so that the interrupt controller is clean. + */ +void kexec_smp_down(void *arg) +{ + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 1); + + local_irq_disable(); + kexec_smp_wait(); + /* NOTREACHED */ +} + +static void kexec_prepare_cpus(void) +{ + int my_cpu, i, notified=-1; + + smp_call_function(kexec_smp_down, NULL, 0, /* wait */0); + my_cpu = get_cpu(); + + /* check the others cpus are now down (via paca hw cpu id == -1) */ + for (i=0; i < NR_CPUS; i++) { + if (i == my_cpu) + continue; + + while (paca[i].hw_cpu_id != -1) { + barrier(); + if (!cpu_possible(i)) { + printk("kexec: cpu %d hw_cpu_id %d is not" + " possible, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (!cpu_online(i)) { + /* Fixme: this can be spinning in + * pSeries_secondary_wait with a paca + * waiting for it to go online. + */ + printk("kexec: cpu %d hw_cpu_id %d is not" + " online, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (i != notified) { + printk( "kexec: waiting for cpu %d (physical" + " %d) to go down\n", + i, paca[i].hw_cpu_id); + notified = i; + } + } + } + + /* after we tell the others to go down */ + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); + + put_cpu(); + + local_irq_disable(); +} + +#else /* ! SMP */ + +static void kexec_prepare_cpus(void) +{ + /* + * move the secondarys to us so that we can copy + * the new kernel 0-0x100 safely + * + * do this if kexec in setup.c ? + * + * We need to release the cpus if we are ever going from an + * UP to an SMP kernel. + */ + smp_release_cpus(); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); + local_irq_disable(); +} + +#endif /* SMP */ + +/* + * kexec thread structure and stack. + * + * We need to make sure that this is 16384-byte aligned due to the + * way process stacks are handled. It also must be statically allocated + * or allocated as part of the kimage, because everything else may be + * overwritten when we copy the kexec image. We piggyback on the + * "init_task" linker section here to statically allocate a stack. + * + * We could use a smaller stack if we don't care about anything using + * current, but that audit has not been performed. + */ +union thread_union kexec_stack + __attribute__((__section__(".data.init_task"))) = { }; + +/* Our assembly helper, in kexec_stub.S */ +extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, + void *image, void *control, + void (*clear_all)(void)) ATTRIB_NORET; + +/* too late to fail here */ +void machine_kexec(struct kimage *image) +{ + + /* prepare control code if any */ + + /* shutdown other cpus into our wait loop and quiesce interrupts */ + kexec_prepare_cpus(); + + /* switch to a staticly allocated stack. Based on irq stack code. + * XXX: the task struct will likely be invalid once we do the copy! + */ + kexec_stack.thread_info.task = current_thread_info()->task; + kexec_stack.thread_info.flags = 0; + + /* Some things are best done in assembly. Finding globals with + * a toc is easier in C, so pass in what we can. + */ + kexec_sequence(&kexec_stack, image->start, image, + page_address(image->control_code_page), + ppc_md.hpte_clear_all); + /* NOTREACHED */ +} + +/* Values we need to export to the second kernel via the device tree. */ +static unsigned long htab_base, htab_size, kernel_end; + +static struct property htab_base_prop = { + .name = "linux,htab-base", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_base, +}; + +static struct property htab_size_prop = { + .name = "linux,htab-size", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_size, +}; + +static struct property kernel_end_prop = { + .name = "linux,kernel-end", + .length = sizeof(unsigned long), + .value = (unsigned char *)&kernel_end, +}; + +static void __init export_htab_values(void) +{ + struct device_node *node; + + node = of_find_node_by_path("/chosen"); + if (!node) + return; + + kernel_end = __pa(_end); + prom_add_property(node, &kernel_end_prop); + + /* On machines with no htab htab_address is NULL */ + if (NULL == htab_address) + goto out; + + htab_base = __pa(htab_address); + prom_add_property(node, &htab_base_prop); + + htab_size = 1UL << ppc64_pft_size; + prom_add_property(node, &htab_size_prop); + + out: + of_node_put(node); +} + +void __init kexec_setup(void) +{ + export_htab_values(); +} diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c new file mode 100644 index 000000000000..928b8581fcb0 --- /dev/null +++ b/arch/powerpc/kernel/module_64.c @@ -0,0 +1,455 @@ +/* Kernel module help for PPC64. + Copyright (C) 2001, 2003 Rusty Russell IBM Corporation. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include +#include +#include +#include +#include +#include +#include + +/* FIXME: We don't do .init separately. To do this, we'd need to have + a separate r2 value in the init and core section, and stub between + them, too. + + Using a magic allocator which places modules within 32MB solves + this, and makes other things simpler. Anton? + --RR. */ +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt , ...) +#endif + +/* There's actually a third entry here, but it's unused */ +struct ppc64_opd_entry +{ + unsigned long funcaddr; + unsigned long r2; +}; + +/* Like PPC32, we need little trampolines to do > 24-bit jumps (into + the kernel itself). But on PPC64, these need to be used for every + jump, actually, to reset r2 (TOC+0x8000). */ +struct ppc64_stub_entry +{ + /* 28 byte jump instruction sequence (7 instructions) */ + unsigned char jump[28]; + unsigned char unused[4]; + /* Data for the above code */ + struct ppc64_opd_entry opd; +}; + +/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external) + function which may be more than 24-bits away. We could simply + patch the new r2 value and function pointer into the stub, but it's + significantly shorter to put these values at the end of the stub + code, and patch the stub address (32-bits relative to the TOC ptr, + r2) into the stub. */ +static struct ppc64_stub_entry ppc64_stub = +{ .jump = { + 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, */ + 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, */ + /* Save current r2 value in magic place on the stack. */ + 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */ + 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */ + 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */ + 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */ + 0x4e, 0x80, 0x04, 0x20 /* bctr */ +} }; + +/* Count how many different 24-bit relocations (different symbol, + different addend) */ +static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num) +{ + unsigned int i, j, ret = 0; + + /* FIXME: Only count external ones --RR */ + /* Sure, this is order(n^2), but it's usually short, and not + time critical */ + for (i = 0; i < num; i++) { + /* Only count 24-bit relocs, others don't need stubs */ + if (ELF64_R_TYPE(rela[i].r_info) != R_PPC_REL24) + continue; + for (j = 0; j < i; j++) { + /* If this addend appeared before, it's + already been counted */ + if (rela[i].r_info == rela[j].r_info + && rela[i].r_addend == rela[j].r_addend) + break; + } + if (j == i) ret++; + } + return ret; +} + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + + return vmalloc_exec(size); +} + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +/* Get size of potential trampolines required. */ +static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, + const Elf64_Shdr *sechdrs) +{ + /* One extra reloc so it's always 0-funcaddr terminated */ + unsigned long relocs = 1; + unsigned i; + + /* Every relocated section... */ + for (i = 1; i < hdr->e_shnum; i++) { + if (sechdrs[i].sh_type == SHT_RELA) { + DEBUGP("Found relocations in section %u\n", i); + DEBUGP("Ptr: %p. Number: %lu\n", + (void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size / sizeof(Elf64_Rela)); + relocs += count_relocs((void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size + / sizeof(Elf64_Rela)); + } + } + + DEBUGP("Looks like a total of %lu stubs, max\n", relocs); + return relocs * sizeof(struct ppc64_stub_entry); +} + +static void dedotify_versions(struct modversion_info *vers, + unsigned long size) +{ + struct modversion_info *end; + + for (end = (void *)vers + size; vers < end; vers++) + if (vers->name[0] == '.') + memmove(vers->name, vers->name+1, strlen(vers->name)); +} + +/* Undefined symbols which refer to .funcname, hack to funcname */ +static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) +{ + unsigned int i; + + for (i = 1; i < numsyms; i++) { + if (syms[i].st_shndx == SHN_UNDEF) { + char *name = strtab + syms[i].st_name; + if (name[0] == '.') + memmove(name, name+1, strlen(name)); + } + } +} + +int module_frob_arch_sections(Elf64_Ehdr *hdr, + Elf64_Shdr *sechdrs, + char *secstrings, + struct module *me) +{ + unsigned int i; + + /* Find .toc and .stubs sections, symtab and strtab */ + for (i = 1; i < hdr->e_shnum; i++) { + char *p; + if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0) + me->arch.stubs_section = i; + else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0) + me->arch.toc_section = i; + else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0) + dedotify_versions((void *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size); + + /* We don't handle .init for the moment: rename to _init */ + while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init"))) + p[0] = '_'; + + if (sechdrs[i].sh_type == SHT_SYMTAB) + dedotify((void *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size / sizeof(Elf64_Sym), + (void *)hdr + + sechdrs[sechdrs[i].sh_link].sh_offset); + } + if (!me->arch.stubs_section || !me->arch.toc_section) { + printk("%s: doesn't contain .toc or .stubs.\n", me->name); + return -ENOEXEC; + } + + /* Override the stubs size */ + sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); + return 0; +} + +int apply_relocate(Elf64_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", me->name); + return -ENOEXEC; +} + +/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this + gives the value maximum span in an instruction which uses a signed + offset) */ +static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) +{ + return sechdrs[me->arch.toc_section].sh_addr + 0x8000; +} + +/* Both low and high 16 bits are added as SIGNED additions, so if low + 16 bits has high bit set, high 16 bits must be adjusted. These + macros do that (stolen from binutils). */ +#define PPC_LO(v) ((v) & 0xffff) +#define PPC_HI(v) (((v) >> 16) & 0xffff) +#define PPC_HA(v) PPC_HI ((v) + 0x8000) + +/* Patch stub to reference function and correct r2 value. */ +static inline int create_stub(Elf64_Shdr *sechdrs, + struct ppc64_stub_entry *entry, + struct ppc64_opd_entry *opd, + struct module *me) +{ + Elf64_Half *loc1, *loc2; + long reladdr; + + *entry = ppc64_stub; + + loc1 = (Elf64_Half *)&entry->jump[2]; + loc2 = (Elf64_Half *)&entry->jump[6]; + + /* Stub uses address relative to r2. */ + reladdr = (unsigned long)entry - my_r2(sechdrs, me); + if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) { + printk("%s: Address %p of stub out of range of %p.\n", + me->name, (void *)reladdr, (void *)my_r2); + return 0; + } + DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr); + + *loc1 = PPC_HA(reladdr); + *loc2 = PPC_LO(reladdr); + entry->opd.funcaddr = opd->funcaddr; + entry->opd.r2 = opd->r2; + return 1; +} + +/* Create stub to jump to function described in this OPD: we need the + stub to set up the TOC ptr (r2) for the function. */ +static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, + unsigned long opdaddr, + struct module *me) +{ + struct ppc64_stub_entry *stubs; + struct ppc64_opd_entry *opd = (void *)opdaddr; + unsigned int i, num_stubs; + + num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs); + + /* Find this stub, or if that fails, the next avail. entry */ + stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr; + for (i = 0; stubs[i].opd.funcaddr; i++) { + BUG_ON(i >= num_stubs); + + if (stubs[i].opd.funcaddr == opd->funcaddr) + return (unsigned long)&stubs[i]; + } + + if (!create_stub(sechdrs, &stubs[i], opd, me)) + return 0; + + return (unsigned long)&stubs[i]; +} + +/* We expect a noop next: if it is, replace it with instruction to + restore r2. */ +static int restore_r2(u32 *instruction, struct module *me) +{ + if (*instruction != 0x60000000) { + printk("%s: Expect noop after relocate, got %08x\n", + me->name, *instruction); + return 0; + } + *instruction = 0xe8410028; /* ld r2,40(r1) */ + return 1; +} + +int apply_relocate_add(Elf64_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr; + Elf64_Sym *sym; + unsigned long *location; + unsigned long value; + + DEBUGP("Applying ADD relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rela[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + + ELF64_R_SYM(rela[i].r_info); + + DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n", + location, (long)ELF64_R_TYPE(rela[i].r_info), + strtab + sym->st_name, (unsigned long)sym->st_value, + (long)rela[i].r_addend); + + /* `Everything is relative'. */ + value = sym->st_value + rela[i].r_addend; + + switch (ELF64_R_TYPE(rela[i].r_info)) { + case R_PPC64_ADDR32: + /* Simply set it */ + *(u32 *)location = value; + break; + + case R_PPC64_ADDR64: + /* Simply set it */ + *(unsigned long *)location = value; + break; + + case R_PPC64_TOC: + *(unsigned long *)location = my_r2(sechdrs, me); + break; + + case R_PPC64_TOC16: + /* Subtact TOC pointer */ + value -= my_r2(sechdrs, me); + if (value + 0x8000 > 0xffff) { + printk("%s: bad TOC16 relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + + case R_PPC64_TOC16_DS: + /* Subtact TOC pointer */ + value -= my_r2(sechdrs, me); + if ((value & 3) != 0 || value + 0x8000 > 0xffff) { + printk("%s: bad TOC16_DS relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xfffc) + | (value & 0xfffc); + break; + + case R_PPC_REL24: + /* FIXME: Handle weak symbols here --RR */ + if (sym->st_shndx == SHN_UNDEF) { + /* External: go via stub */ + value = stub_for_addr(sechdrs, value, me); + if (!value) + return -ENOENT; + if (!restore_r2((u32 *)location + 1, me)) + return -ENOEXEC; + } + + /* Convert value to relative */ + value -= (unsigned long)location; + if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ + printk("%s: REL24 %li out of range!\n", + me->name, (long int)value); + return -ENOEXEC; + } + + /* Only replace bits 2 through 26 */ + *(uint32_t *)location + = (*(uint32_t *)location & ~0x03fffffc) + | (value & 0x03fffffc); + break; + + default: + printk("%s: Unknown ADD relocation: %lu\n", + me->name, + (unsigned long)ELF64_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + } + } + + return 0; +} + +LIST_HEAD(module_bug_list); + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, struct module *me) +{ + char *secstrings; + unsigned int i; + + me->arch.bug_table = NULL; + me->arch.num_bugs = 0; + + /* Find the __bug_table section, if present */ + secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + for (i = 1; i < hdr->e_shnum; i++) { + if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) + continue; + me->arch.bug_table = (void *) sechdrs[i].sh_addr; + me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); + break; + } + + /* + * Strictly speaking this should have a spinlock to protect against + * traversals, but since we only traverse on BUG()s, a spinlock + * could potentially lead to deadlock and thus be counter-productive. + */ + list_add(&me->arch.bug_list, &module_bug_list); + + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + list_del(&mod->arch.bug_list); +} + +struct bug_entry *module_find_bug(unsigned long bugaddr) +{ + struct mod_arch_specific *mod; + unsigned int i; + struct bug_entry *bug; + + list_for_each_entry(mod, &module_bug_list, bug_list) { + bug = mod->bug_table; + for (i = 0; i < mod->num_bugs; ++i, ++bug) + if (bugaddr == bug->bug_addr) + return bug; + } + return NULL; +} diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c new file mode 100644 index 000000000000..3cef1b8f57f0 --- /dev/null +++ b/arch/powerpc/kernel/pci_64.c @@ -0,0 +1,1319 @@ +/* + * Port for PPC64 David Engebretsen, IBM Corp. + * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. + * + * Copyright (C) 2003 Anton Blanchard , IBM + * Rework, based on alpha PCI code. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +unsigned long pci_probe_only = 1; +unsigned long pci_assign_all_buses = 0; + +/* + * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch + * devices we don't have access to. + */ +unsigned long io_page_mask; + +EXPORT_SYMBOL(io_page_mask); + +#ifdef CONFIG_PPC_MULTIPLATFORM +static void fixup_resource(struct resource *res, struct pci_dev *dev); +static void do_bus_setup(struct pci_bus *bus); +#endif + +unsigned int pcibios_assign_all_busses(void) +{ + return pci_assign_all_buses; +} + +/* pci_io_base -- the base address from which io bars are offsets. + * This is the lowest I/O base address (so bar values are always positive), + * and it *must* be the start of ISA space if an ISA bus exists because + * ISA drivers use hard coded offsets. If no ISA bus exists a dummy + * page is mapped and isa_io_limit prevents access to it. + */ +unsigned long isa_io_base; /* NULL if no ISA bus */ +EXPORT_SYMBOL(isa_io_base); +unsigned long pci_io_base; +EXPORT_SYMBOL(pci_io_base); + +void iSeries_pcibios_init(void); + +LIST_HEAD(hose_list); + +struct dma_mapping_ops pci_dma_ops; +EXPORT_SYMBOL(pci_dma_ops); + +int global_phb_number; /* Global phb counter */ + +/* Cached ISA bridge dev. */ +struct pci_dev *ppc64_isabridge_dev = NULL; + +static void fixup_broken_pcnet32(struct pci_dev* dev) +{ + if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { + dev->vendor = PCI_VENDOR_ID_AMD; + pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + unsigned long offset = 0; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + + if (res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + unsigned long offset = 0; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + + if (res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +#endif + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) +{ + struct pci_dev *dev = data; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long start = res->start; + unsigned long alignto; + + if (res->flags & IORESOURCE_IO) { + unsigned long offset = (unsigned long)hose->io_base_virt - + pci_io_base; + /* Make sure we start at our min on all hoses */ + if (start - offset < PCIBIOS_MIN_IO) + start = PCIBIOS_MIN_IO + offset; + + /* + * Put everything into 0x00-0xff region modulo 0x400 + */ + if (start & 0x300) + start = (start + 0x3ff) & ~0x3ff; + + } else if (res->flags & IORESOURCE_MEM) { + /* Make sure we start at our min on all hoses */ + if (start - hose->pci_mem_offset < PCIBIOS_MIN_MEM) + start = PCIBIOS_MIN_MEM + hose->pci_mem_offset; + + /* Align to multiple of size of minimum base. */ + alignto = max(0x1000UL, align); + start = ALIGN(start, alignto); + } + + res->start = start; +} + +static DEFINE_SPINLOCK(hose_spinlock); + +/* + * pci_controller(phb) initialized common variables. + */ +void __devinit pci_setup_pci_controller(struct pci_controller *hose) +{ + memset(hose, 0, sizeof(struct pci_controller)); + + spin_lock(&hose_spinlock); + hose->global_number = global_phb_number++; + list_add_tail(&hose->list_node, &hose_list); + spin_unlock(&hose_spinlock); +} + +static void __init pcibios_claim_one_bus(struct pci_bus *b) +{ + struct pci_dev *dev; + struct pci_bus *child_bus; + + list_for_each_entry(dev, &b->devices, bus_list) { + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (r->parent || !r->start || !r->flags) + continue; + pci_claim_resource(dev, i); + } + } + + list_for_each_entry(child_bus, &b->children, node) + pcibios_claim_one_bus(child_bus); +} + +#ifndef CONFIG_PPC_ISERIES +static void __init pcibios_claim_of_setup(void) +{ + struct pci_bus *b; + + list_for_each_entry(b, &pci_root_buses, node) + pcibios_claim_one_bus(b); +} +#endif + +#ifdef CONFIG_PPC_MULTIPLATFORM +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + u32 *prop; + int len; + + prop = (u32 *) get_property(np, name, &len); + if (prop && len >= 4) + return *prop; + return def; +} + +static unsigned int pci_parse_of_flags(u32 addr0) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; + } else if (addr0 & 0x01000000) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + return flags; +} + +#define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) + +static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct resource *res; + u32 *addrs, i; + int proplen; + + addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); + if (!addrs) + return; + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(addrs[0]); + if (!flags) + continue; + base = GET_64BIT(addrs, 1); + size = GET_64BIT(addrs, 3); + if (!size) + continue; + i = addrs[0] & 0xff; + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->start = base; + res->end = base + size - 1; + res->flags = flags; + res->name = pci_name(dev); + fixup_resource(res, dev); + } +} + +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = kmalloc(sizeof(struct pci_dev), GFP_KERNEL); + if (!dev) + return NULL; + type = get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + memset(dev, 0, sizeof(struct pci_dev)); + dev->bus = bus; + dev->sysdata = node; + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = 256; /*pci_cfg_space_size(dev);*/ + + sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + + dev->current_state = 4; /* unknown power state */ + + if (!strcmp(type, "pci")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + dev->irq = NO_IRQ; + if (node->n_intrs > 0) { + dev->irq = node->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } + } + + pci_parse_of_addrs(node, dev); + + pci_device_add(dev, bus); + + /* XXX pci_scan_msi_device(dev); */ + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +void __devinit of_scan_bus(struct device_node *node, + struct pci_bus *bus) +{ + struct device_node *child = NULL; + u32 *reg; + int reglen, devfn; + struct pci_dev *dev; + + while ((child = of_get_next_child(node, child)) != NULL) { + reg = (u32 *) get_property(child, "reg", ®len); + if (reg == NULL || reglen < 20) + continue; + devfn = (reg[0] >> 8) & 0xff; + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(child, bus, devfn); + if (!dev) + continue; + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + of_scan_pci_bridge(child, dev); + } + + do_bus_setup(bus); +} +EXPORT_SYMBOL(of_scan_bus); + +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) +{ + struct pci_bus *bus; + u32 *busrange, *ranges; + int len, i, mode; + struct resource *res; + unsigned int flags; + u64 size; + + /* parse bus-range property */ + busrange = (u32 *) get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", + node->full_name); + return; + } + ranges = (u32 *) get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", + node->full_name); + return; + } + + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } + + bus->primary = dev->bus->number; + bus->subordinate = busrange[1]; + bus->bridge_ctl = 0; + bus->sysdata = node; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(ranges[0]); + size = GET_64BIT(ranges, 6); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %s\n", node->full_name); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %s\n", node->full_name); + continue; + } + res = bus->resource[i]; + ++i; + } + res->start = GET_64BIT(ranges, 1); + res->end = res->start + size - 1; + res->flags = flags; + fixup_resource(res, dev); + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +void __devinit scan_phb(struct pci_controller *hose) +{ + struct pci_bus *bus; + struct device_node *node = hose->arch_data; + int i, mode; + struct resource *res; + + bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); + if (bus == NULL) { + printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + bus->resource[0] = res = &hose->io_resource; + if (res->flags && request_resource(&ioport_resource, res)) + printk(KERN_ERR "Failed to request PCI IO region " + "on PCI domain %04x\n", hose->global_number); + + for (i = 0; i < 3; ++i) { + res = &hose->mem_resources[i]; + bus->resource[i+1] = res; + if (res->flags && request_resource(&iomem_resource, res)) + printk(KERN_ERR "Failed to request PCI memory region " + "on PCI domain %04x\n", hose->global_number); + } + + mode = PCI_PROBE_NORMAL; +#ifdef CONFIG_PPC_MULTIPLATFORM + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + if (mode == PCI_PROBE_DEVTREE) { + bus->subordinate = hose->last_busno; + of_scan_bus(node, bus); + } +#endif /* CONFIG_PPC_MULTIPLATFORM */ + if (mode == PCI_PROBE_NORMAL) + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); + pci_bus_add_devices(bus); +} + +static int __init pcibios_init(void) +{ + struct pci_controller *hose, *tmp; + + /* For now, override phys_mem_access_prot. If we need it, + * later, we may move that initialization to each ppc_md + */ + ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; + +#ifdef CONFIG_PPC_ISERIES + iSeries_pcibios_init(); +#endif + + printk("PCI: Probing PCI hardware\n"); + + /* Scan all of the recorded PCI controllers. */ + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + scan_phb(hose); + +#ifndef CONFIG_PPC_ISERIES + if (pci_probe_only) + pcibios_claim_of_setup(); + else + /* FIXME: `else' will be removed when + pci_assign_unassigned_resources() is able to work + correctly with [partially] allocated PCI tree. */ + pci_assign_unassigned_resources(); +#endif /* !CONFIG_PPC_ISERIES */ + + /* Call machine dependent final fixup */ + if (ppc_md.pcibios_fixup) + ppc_md.pcibios_fixup(); + + /* Cache the location of the ISA bridge (if we have one) */ + ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); + if (ppc64_isabridge_dev != NULL) + printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); + +#ifdef CONFIG_PPC_MULTIPLATFORM + /* map in PCI I/O space */ + phbs_remap_io(); +#endif + + printk("PCI: Probing PCI hardware done\n"); + + return 0; +} + +subsys_initcall(pcibios_init); + +char __init *pcibios_setup(char *str) +{ + return str; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, oldcmd; + int i; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + oldcmd = cmd; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *res = &dev->resource[i]; + + /* Only set up the requested stuff */ + if (!(mask & (1<flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (res->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + + if (cmd != oldcmd) { + printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", + pci_name(dev), cmd); + /* Enable the appropriate bits in the PCI command register. */ + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * Return the domain number for this bus. + */ +int pci_domain_nr(struct pci_bus *bus) +{ +#ifdef CONFIG_PPC_ISERIES + return 0; +#else + struct pci_controller *hose = pci_bus_to_host(bus); + + return hose->global_number; +#endif +} + +EXPORT_SYMBOL(pci_domain_nr); + +/* Decide whether to display the domain number in /proc */ +int pci_proc_domain(struct pci_bus *bus) +{ +#ifdef CONFIG_PPC_ISERIES + return 0; +#else + struct pci_controller *hose = pci_bus_to_host(bus); + return hose->buid; +#endif +} + +/* + * Platform support for /proc/bus/pci/X/Y mmap()s, + * modelled on the sparc64 implementation by Dave Miller. + * -- paulus. + */ + +/* + * Adjust vm_pgoff of VMA such that it is the physical page offset + * corresponding to the 32-bit pci bus offset for DEV requested by the user. + * + * Basically, the user finds the base address for his device which he wishes + * to mmap. They read the 32-bit value from the config space base register, + * add whatever PAGE_SIZE multiple offset they wish, and feed this into the + * offset parameter of mmap on /proc/bus/pci/XXX for that device. + * + * Returns negative error code on failure, zero on success. + */ +static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, + unsigned long *offset, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long io_offset = 0; + int i, res_bit; + + if (hose == 0) + return NULL; /* should never happen */ + + /* If memory, add on the PCI bridge address offset */ + if (mmap_state == pci_mmap_mem) { + *offset += hose->pci_mem_offset; + res_bit = IORESOURCE_MEM; + } else { + io_offset = (unsigned long)hose->io_base_virt - pci_io_base; + *offset += io_offset; + res_bit = IORESOURCE_IO; + } + + /* + * Check that the offset requested corresponds to one of the + * resources of the device. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &dev->resource[i]; + int flags = rp->flags; + + /* treat ROM as memory (should be already) */ + if (i == PCI_ROM_RESOURCE) + flags |= IORESOURCE_MEM; + + /* Active and same type? */ + if ((flags & res_bit) == 0) + continue; + + /* In the range of this resource? */ + if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) + continue; + + /* found it! construct the final physical address */ + if (mmap_state == pci_mmap_io) + *offset += hose->io_base_phys - io_offset; + return rp; + } + + return NULL; +} + +/* + * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci + * device mapping. + */ +static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, + pgprot_t protection, + enum pci_mmap_state mmap_state, + int write_combine) +{ + unsigned long prot = pgprot_val(protection); + + /* Write combine is always 0 on non-memory space mappings. On + * memory space, if the user didn't pass 1, we check for a + * "prefetchable" resource. This is a bit hackish, but we use + * this to workaround the inability of /sysfs to provide a write + * combine bit + */ + if (mmap_state != pci_mmap_mem) + write_combine = 0; + else if (write_combine == 0) { + if (rp->flags & IORESOURCE_PREFETCH) + write_combine = 1; + } + + /* XXX would be nice to have a way to ask for write-through */ + prot |= _PAGE_NO_CACHE; + if (write_combine) + prot &= ~_PAGE_GUARDED; + else + prot |= _PAGE_GUARDED; + + printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, + prot); + + return __pgprot(prot); +} + +/* + * This one is used by /dev/mem and fbdev who have no clue about the + * PCI device, it tries to find the PCI device first and calls the + * above routine + */ +pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t protection) +{ + struct pci_dev *pdev = NULL; + struct resource *found = NULL; + unsigned long prot = pgprot_val(protection); + unsigned long offset = pfn << PAGE_SHIFT; + int i; + + if (page_is_ram(pfn)) + return __pgprot(prot); + + prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; + + for_each_pci_dev(pdev) { + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &pdev->resource[i]; + int flags = rp->flags; + + /* Active and same type? */ + if ((flags & IORESOURCE_MEM) == 0) + continue; + /* In the range of this resource? */ + if (offset < (rp->start & PAGE_MASK) || + offset > rp->end) + continue; + found = rp; + break; + } + if (found) + break; + } + if (found) { + if (found->flags & IORESOURCE_PREFETCH) + prot &= ~_PAGE_GUARDED; + pci_dev_put(pdev); + } + + DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); + + return __pgprot(prot); +} + + +/* + * Perform the actual remap of the pages for a PCI device mapping, as + * appropriate for this architecture. The region in the process to map + * is described by vm_start and vm_end members of VMA, the base physical + * address is found in vm_pgoff. + * The pci device structure is provided so that architectures may make mapping + * decisions on a per-device or per-bus basis. + * + * Returns a negative error code on failure, zero on success. + */ +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, + int write_combine) +{ + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + struct resource *rp; + int ret; + + rp = __pci_mmap_make_offset(dev, &offset, mmap_state); + if (rp == NULL) + return -EINVAL; + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; + vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, + vma->vm_page_prot, + mmap_state, write_combine); + + ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); + + return ret; +} + +#ifdef CONFIG_PPC_MULTIPLATFORM +static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; + struct device_node *np; + + pdev = to_pci_dev (dev); + np = pci_device_to_OF_node(pdev); + if (np == NULL || np->full_name == NULL) + return 0; + return sprintf(buf, "%s", np->full_name); +} +static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +void pcibios_add_platform_entries(struct pci_dev *pdev) +{ +#ifdef CONFIG_PPC_MULTIPLATFORM + device_create_file(&pdev->dev, &dev_attr_devspec); +#endif /* CONFIG_PPC_MULTIPLATFORM */ +} + +#ifdef CONFIG_PPC_MULTIPLATFORM + +#define ISA_SPACE_MASK 0x1 +#define ISA_SPACE_IO 0x1 + +static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, + unsigned long phb_io_base_phys, + void __iomem * phb_io_base_virt) +{ + struct isa_range *range; + unsigned long pci_addr; + unsigned int isa_addr; + unsigned int size; + int rlen = 0; + + range = (struct isa_range *) get_property(isa_node, "ranges", &rlen); + if (range == NULL || (rlen < sizeof(struct isa_range))) { + printk(KERN_ERR "no ISA ranges or unexpected isa range size," + "mapping 64k\n"); + __ioremap_explicit(phb_io_base_phys, + (unsigned long)phb_io_base_virt, + 0x10000, _PAGE_NO_CACHE | _PAGE_GUARDED); + return; + } + + /* From "ISA Binding to 1275" + * The ranges property is laid out as an array of elements, + * each of which comprises: + * cells 0 - 1: an ISA address + * cells 2 - 4: a PCI address + * (size depending on dev->n_addr_cells) + * cell 5: the size of the range + */ + if ((range->isa_addr.a_hi && ISA_SPACE_MASK) == ISA_SPACE_IO) { + isa_addr = range->isa_addr.a_lo; + pci_addr = (unsigned long) range->pci_addr.a_mid << 32 | + range->pci_addr.a_lo; + + /* Assume these are both zero */ + if ((pci_addr != 0) || (isa_addr != 0)) { + printk(KERN_ERR "unexpected isa to pci mapping: %s\n", + __FUNCTION__); + return; + } + + size = PAGE_ALIGN(range->size); + + __ioremap_explicit(phb_io_base_phys, + (unsigned long) phb_io_base_virt, + size, _PAGE_NO_CACHE | _PAGE_GUARDED); + } +} + +void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int prim) +{ + unsigned int *ranges, pci_space; + unsigned long size; + int rlen = 0; + int memno = 0; + struct resource *res; + int np, na = prom_n_addr_cells(dev); + unsigned long pci_addr, cpu_phys_addr; + + np = na + 5; + + /* From "PCI Binding to 1275" + * The ranges property is laid out as an array of elements, + * each of which comprises: + * cells 0 - 2: a PCI address + * cells 3 or 3+4: a CPU physical address + * (size depending on dev->n_addr_cells) + * cells 4+5 or 5+6: the size of the range + */ + rlen = 0; + hose->io_base_phys = 0; + ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + while ((rlen -= np * sizeof(unsigned int)) >= 0) { + res = NULL; + pci_space = ranges[0]; + pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2]; + + cpu_phys_addr = ranges[3]; + if (na >= 2) + cpu_phys_addr = (cpu_phys_addr << 32) | ranges[4]; + + size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4]; + ranges += np; + if (size == 0) + continue; + + /* Now consume following elements while they are contiguous */ + while (rlen >= np * sizeof(unsigned int)) { + unsigned long addr, phys; + + if (ranges[0] != pci_space) + break; + addr = ((unsigned long)ranges[1] << 32) | ranges[2]; + phys = ranges[3]; + if (na >= 2) + phys = (phys << 32) | ranges[4]; + if (addr != pci_addr + size || + phys != cpu_phys_addr + size) + break; + + size += ((unsigned long)ranges[na+3] << 32) + | ranges[na+4]; + ranges += np; + rlen -= np * sizeof(unsigned int); + } + + switch ((pci_space >> 24) & 0x3) { + case 1: /* I/O space */ + hose->io_base_phys = cpu_phys_addr; + hose->pci_io_size = size; + + res = &hose->io_resource; + res->flags = IORESOURCE_IO; + res->start = pci_addr; + DBG("phb%d: IO 0x%lx -> 0x%lx\n", hose->global_number, + res->start, res->start + size - 1); + break; + case 2: /* memory space */ + memno = 0; + while (memno < 3 && hose->mem_resources[memno].flags) + ++memno; + + if (memno == 0) + hose->pci_mem_offset = cpu_phys_addr - pci_addr; + if (memno < 3) { + res = &hose->mem_resources[memno]; + res->flags = IORESOURCE_MEM; + res->start = cpu_phys_addr; + DBG("phb%d: MEM 0x%lx -> 0x%lx\n", hose->global_number, + res->start, res->start + size - 1); + } + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->end = res->start + size - 1; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; + } + } +} + +void __init pci_setup_phb_io(struct pci_controller *hose, int primary) +{ + unsigned long size = hose->pci_io_size; + unsigned long io_virt_offset; + struct resource *res; + struct device_node *isa_dn; + + hose->io_base_virt = reserve_phb_iospace(size); + DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", + hose->global_number, hose->io_base_phys, + (unsigned long) hose->io_base_virt); + + if (primary) { + pci_io_base = (unsigned long)hose->io_base_virt; + isa_dn = of_find_node_by_type(NULL, "isa"); + if (isa_dn) { + isa_io_base = pci_io_base; + pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys, + hose->io_base_virt); + of_node_put(isa_dn); + /* Allow all IO */ + io_page_mask = -1; + } + } + + io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; + res = &hose->io_resource; + res->start += io_virt_offset; + res->end += io_virt_offset; +} + +void __devinit pci_setup_phb_io_dynamic(struct pci_controller *hose, + int primary) +{ + unsigned long size = hose->pci_io_size; + unsigned long io_virt_offset; + struct resource *res; + + hose->io_base_virt = __ioremap(hose->io_base_phys, size, + _PAGE_NO_CACHE | _PAGE_GUARDED); + DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", + hose->global_number, hose->io_base_phys, + (unsigned long) hose->io_base_virt); + + if (primary) + pci_io_base = (unsigned long)hose->io_base_virt; + + io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; + res = &hose->io_resource; + res->start += io_virt_offset; + res->end += io_virt_offset; +} + + +static int get_bus_io_range(struct pci_bus *bus, unsigned long *start_phys, + unsigned long *start_virt, unsigned long *size) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pci_bus_region region; + struct resource *res; + + if (bus->self) { + res = bus->resource[0]; + pcibios_resource_to_bus(bus->self, ®ion, res); + *start_phys = hose->io_base_phys + region.start; + *start_virt = (unsigned long) hose->io_base_virt + + region.start; + if (region.end > region.start) + *size = region.end - region.start + 1; + else { + printk("%s(): unexpected region 0x%lx->0x%lx\n", + __FUNCTION__, region.start, region.end); + return 1; + } + + } else { + /* Root Bus */ + res = &hose->io_resource; + *start_phys = hose->io_base_phys; + *start_virt = (unsigned long) hose->io_base_virt; + if (res->end > res->start) + *size = res->end - res->start + 1; + else { + printk("%s(): unexpected region 0x%lx->0x%lx\n", + __FUNCTION__, res->start, res->end); + return 1; + } + } + + return 0; +} + +int unmap_bus_range(struct pci_bus *bus) +{ + unsigned long start_phys; + unsigned long start_virt; + unsigned long size; + + if (!bus) { + printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); + return 1; + } + + if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) + return 1; + if (iounmap_explicit((void __iomem *) start_virt, size)) + return 1; + + return 0; +} +EXPORT_SYMBOL(unmap_bus_range); + +int remap_bus_range(struct pci_bus *bus) +{ + unsigned long start_phys; + unsigned long start_virt; + unsigned long size; + + if (!bus) { + printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); + return 1; + } + + + if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) + return 1; + printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); + if (__ioremap_explicit(start_phys, start_virt, size, + _PAGE_NO_CACHE | _PAGE_GUARDED)) + return 1; + + return 0; +} +EXPORT_SYMBOL(remap_bus_range); + +void phbs_remap_io(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + remap_bus_range(hose->bus); +} + +/* + * ppc64 can have multifunction devices that do not respond to function 0. + * In this case we must scan all functions. + * XXX this can go now, we use the OF device tree in all the + * cases that caused problems. -- paulus + */ +int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) +{ + return 0; +} + +static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long start, end, mask, offset; + + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + start = res->start += offset; + end = res->end += offset; + + /* Need to allow IO access to pages that are in the + ISA range */ + if (start < MAX_ISA_PORT) { + if (end > MAX_ISA_PORT) + end = MAX_ISA_PORT; + + start >>= PAGE_SHIFT; + end >>= PAGE_SHIFT; + + /* get the range of pages for the map */ + mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1); + io_page_mask |= mask; + } + } else if (res->flags & IORESOURCE_MEM) { + res->start += hose->pci_mem_offset; + res->end += hose->pci_mem_offset; + } +} + +void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus) +{ + /* Update device resources. */ + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) + if (dev->resource[i].flags) + fixup_resource(&dev->resource[i], dev); +} +EXPORT_SYMBOL(pcibios_fixup_device_resources); + +static void __devinit do_bus_setup(struct pci_bus *bus) +{ + struct pci_dev *dev; + + ppc_md.iommu_bus_setup(bus); + + list_for_each_entry(dev, &bus->devices, bus_list) + ppc_md.iommu_dev_setup(dev); + + if (ppc_md.irq_bus_setup) + ppc_md.irq_bus_setup(bus); +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + + if (dev && pci_probe_only && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + /* This is a subordinate bridge */ + + pci_read_bridge_bases(bus); + pcibios_fixup_device_resources(dev, bus); + } + + do_bus_setup(bus); + + if (!pci_probe_only) + return; + + list_for_each_entry(dev, &bus->devices, bus_list) + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + pcibios_fixup_device_resources(dev, bus); +} +EXPORT_SYMBOL(pcibios_fixup_bus); + +/* + * Reads the interrupt pin to determine if interrupt is use by card. + * If the interrupt is used, then gets the interrupt line from the + * openfirmware and sets it in the pci_dev and pci_config line. + */ +int pci_read_irq_line(struct pci_dev *pci_dev) +{ + u8 intpin; + struct device_node *node; + + pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin); + if (intpin == 0) + return 0; + + node = pci_device_to_OF_node(pci_dev); + if (node == NULL) + return -1; + + if (node->n_intrs == 0) + return -1; + + pci_dev->irq = node->intrs[0].line; + + pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); + + return 0; +} +EXPORT_SYMBOL(pci_read_irq_line); + +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + u64 *start, u64 *end) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long offset = 0; + + if (hose == NULL) + return; + + if (rsrc->flags & IORESOURCE_IO) + offset = pci_io_base - (unsigned long)hose->io_base_virt + + hose->io_base_phys; + + *start = rsrc->start + offset; + *end = rsrc->end + offset; +} + +#endif /* CONFIG_PPC_MULTIPLATFORM */ + + +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +long sys_pciconfig_iobase(long which, unsigned long in_bus, + unsigned long in_devfn) +{ + struct pci_controller* hose; + struct list_head *ln; + struct pci_bus *bus = NULL; + struct device_node *hose_node; + + /* Argh ! Please forgive me for that hack, but that's the + * simplest way to get existing XFree to not lockup on some + * G5 machines... So when something asks for bus 0 io base + * (bus 0 is HT root), we return the AGP one instead. + */ + if (machine_is_compatible("MacRISC4")) + if (in_bus == 0) + in_bus = 0xf0; + + /* That syscall isn't quite compatible with PCI domains, but it's + * used on pre-domains setup. We return the first match + */ + + for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { + bus = pci_bus_b(ln); + if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) + break; + bus = NULL; + } + if (bus == NULL || bus->sysdata == NULL) + return -ENODEV; + + hose_node = (struct device_node *)bus->sysdata; + hose = PCI_DN(hose_node)->phb; + + switch (which) { + case IOBASE_BRIDGE_NUMBER: + return (long)hose->first_busno; + case IOBASE_MEMORY: + return (long)hose->pci_mem_offset; + case IOBASE_IO: + return (long)hose->io_base_phys; + case IOBASE_ISA_IO: + return (long)isa_io_base; + case IOBASE_ISA_MEM: + return -EINVAL; + } + + return -EOPNOTSUPP; +} diff --git a/arch/powerpc/kernel/pci_direct_iommu.c b/arch/powerpc/kernel/pci_direct_iommu.c new file mode 100644 index 000000000000..e1a32f802c0b --- /dev/null +++ b/arch/powerpc/kernel/pci_direct_iommu.c @@ -0,0 +1,94 @@ +/* + * Support for DMA from PCI devices to main memory on + * machines without an iommu or with directly addressable + * RAM (typically a pmac with 2Gb of RAM or less) + * + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret; + + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret); + } + return ret; +} + +static void pci_direct_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} + +static dma_addr_t pci_direct_map_single(struct device *hwdev, void *ptr, + size_t size, enum dma_data_direction direction) +{ + return virt_to_abs(ptr); +} + +static void pci_direct_unmap_single(struct device *hwdev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static int pci_direct_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = page_to_phys(sg->page) + sg->offset; + sg->dma_length = sg->length; + } + + return nents; +} + +static void pci_direct_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +} + +static int pci_direct_dma_supported(struct device *dev, u64 mask) +{ + return mask < 0x100000000ull; +} + +void __init pci_direct_iommu_init(void) +{ + pci_dma_ops.alloc_coherent = pci_direct_alloc_coherent; + pci_dma_ops.free_coherent = pci_direct_free_coherent; + pci_dma_ops.map_single = pci_direct_map_single; + pci_dma_ops.unmap_single = pci_direct_unmap_single; + pci_dma_ops.map_sg = pci_direct_map_sg; + pci_dma_ops.unmap_sg = pci_direct_unmap_sg; + pci_dma_ops.dma_supported = pci_direct_dma_supported; +} diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c new file mode 100644 index 000000000000..12c4c9e9bbc7 --- /dev/null +++ b/arch/powerpc/kernel/pci_dn.c @@ -0,0 +1,230 @@ +/* + * pci_dn.c + * + * Copyright (C) 2001 Todd Inglett, IBM Corporation + * + * PCI manipulation via device_nodes. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * Traverse_func that inits the PCI fields of the device node. + * NOTE: this *must* be done before read/write config to the device. + */ +static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) +{ + struct pci_controller *phb = data; + int *type = (int *)get_property(dn, "ibm,pci-config-space-type", NULL); + u32 *regs; + struct pci_dn *pdn; + + if (mem_init_done) + pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); + else + pdn = alloc_bootmem(sizeof(*pdn)); + if (pdn == NULL) + return NULL; + memset(pdn, 0, sizeof(*pdn)); + dn->data = pdn; + pdn->node = dn; + pdn->phb = phb; + regs = (u32 *)get_property(dn, "reg", NULL); + if (regs) { + /* First register entry is addr (00BBSS00) */ + pdn->busno = (regs[0] >> 16) & 0xff; + pdn->devfn = (regs[0] >> 8) & 0xff; + } + + pdn->pci_ext_config_space = (type && *type == 1); + return NULL; +} + +/* + * Traverse a device tree stopping each PCI device in the tree. + * This is done depth first. As each node is processed, a "pre" + * function is called and the children are processed recursively. + * + * The "pre" func returns a value. If non-zero is returned from + * the "pre" func, the traversal stops and this value is returned. + * This return value is useful when using traverse as a method of + * finding a device. + * + * NOTE: we do not run the func for devices that do not appear to + * be PCI except for the start node which we assume (this is good + * because the start node is often a phb which may be missing PCI + * properties). + * We use the class-code as an indicator. If we run into + * one of these nodes we also assume its siblings are non-pci for + * performance. + */ +void *traverse_pci_devices(struct device_node *start, traverse_func pre, + void *data) +{ + struct device_node *dn, *nextdn; + void *ret; + + /* We started with a phb, iterate all childs */ + for (dn = start->child; dn; dn = nextdn) { + u32 *classp, class; + + nextdn = NULL; + classp = (u32 *)get_property(dn, "class-code", NULL); + class = classp ? *classp : 0; + + if (pre && ((ret = pre(dn, data)) != NULL)) + return ret; + + /* If we are a PCI bridge, go down */ + if (dn->child && ((class >> 8) == PCI_CLASS_BRIDGE_PCI || + (class >> 8) == PCI_CLASS_BRIDGE_CARDBUS)) + /* Depth first...do children */ + nextdn = dn->child; + else if (dn->sibling) + /* ok, try next sibling instead. */ + nextdn = dn->sibling; + if (!nextdn) { + /* Walk up to next valid sibling. */ + do { + dn = dn->parent; + if (dn == start) + return NULL; + } while (dn->sibling == NULL); + nextdn = dn->sibling; + } + } + return NULL; +} + +/** + * pci_devs_phb_init_dynamic - setup pci devices under this PHB + * phb: pci-to-host bridge (top-level bridge connecting to cpu) + * + * This routine is called both during boot, (before the memory + * subsystem is set up, before kmalloc is valid) and during the + * dynamic lpar operation of adding a PHB to a running system. + */ +void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) +{ + struct device_node * dn = (struct device_node *) phb->arch_data; + struct pci_dn *pdn; + + /* PHB nodes themselves must not match */ + update_dn_pci_info(dn, phb); + pdn = dn->data; + if (pdn) { + pdn->devfn = pdn->busno = -1; + pdn->phb = phb; + } + + /* Update dn->phb ptrs for new phb and children devices */ + traverse_pci_devices(dn, update_dn_pci_info, phb); +} + +/* + * Traversal func that looks for a value. + * If found, the pci_dn is returned (thus terminating the traversal). + */ +static void *is_devfn_node(struct device_node *dn, void *data) +{ + int busno = ((unsigned long)data >> 8) & 0xff; + int devfn = ((unsigned long)data) & 0xff; + struct pci_dn *pci = dn->data; + + if (pci && (devfn == pci->devfn) && (busno == pci->busno)) + return dn; + return NULL; +} + +/* + * This is the "slow" path for looking up a device_node from a + * pci_dev. It will hunt for the device under its parent's + * phb and then update sysdata for a future fastpath. + * + * It may also do fixups on the actual device since this happens + * on the first read/write. + * + * Note that it also must deal with devices that don't exist. + * In this case it may probe for real hardware ("just in case") + * and add a device_node to the device tree if necessary. + * + */ +struct device_node *fetch_dev_dn(struct pci_dev *dev) +{ + struct device_node *orig_dn = dev->sysdata; + struct device_node *dn; + unsigned long searchval = (dev->bus->number << 8) | dev->devfn; + + dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval); + if (dn) + dev->sysdata = dn; + return dn; +} +EXPORT_SYMBOL(fetch_dev_dn); + +static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) +{ + struct device_node *np = node; + struct pci_dn *pci = NULL; + int err = NOTIFY_OK; + + switch (action) { + case PSERIES_RECONFIG_ADD: + pci = np->parent->data; + if (pci) + update_dn_pci_info(np, pci->phb); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pci_dn_reconfig_nb = { + .notifier_call = pci_dn_reconfig_notifier, +}; + +/** + * pci_devs_phb_init - Initialize phbs and pci devs under them. + * + * This routine walks over all phb's (pci-host bridges) on the + * system, and sets up assorted pci-related structures + * (including pci info in the device node structs) for each + * pci device found underneath. This routine runs once, + * early in the boot sequence. + */ +void __init pci_devs_phb_init(void) +{ + struct pci_controller *phb, *tmp; + + /* This must be done first so the device nodes have valid pci info! */ + list_for_each_entry_safe(phb, tmp, &hose_list, list_node) + pci_devs_phb_init_dynamic(phb); + + pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb); +} diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c new file mode 100644 index 000000000000..bdf15dbbf4f0 --- /dev/null +++ b/arch/powerpc/kernel/pci_iommu.c @@ -0,0 +1,128 @@ +/* + * arch/ppc64/kernel/pci_iommu.c + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * + * Rewrite, cleanup, new allocation schemes: + * Copyright (C) 2004 Olof Johansson, IBM Corporation + * + * Dynamic DMA mapping support, platform-independent parts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * We can use ->sysdata directly and avoid the extra work in + * pci_device_to_OF_node since ->sysdata will have been initialised + * in the iommu init code for all devices. + */ +#define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata)) + +static inline struct iommu_table *devnode_table(struct device *dev) +{ + struct pci_dev *pdev; + + if (!dev) { + pdev = ppc64_isabridge_dev; + if (!pdev) + return NULL; + } else + pdev = to_pci_dev(dev); + + return PCI_DN(PCI_GET_DN(pdev))->iommu_table; +} + + +/* Allocates a contiguous real buffer and creates mappings over it. + * Returns the virtual address of the buffer and sets dma_handle + * to the dma address (mapping) of the first page. + */ +static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, + flag); +} + +static void pci_iommu_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + iommu_free_coherent(devnode_table(hwdev), size, vaddr, dma_handle); +} + +/* Creates TCEs for a user provided buffer. The user buffer must be + * contiguous real kernel storage (not vmalloc). The address of the buffer + * passed here is the kernel (virtual) address of the buffer. The buffer + * need not be page aligned, the dma_addr_t returned will point to the same + * byte within the page as vaddr. + */ +static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr, + size_t size, enum dma_data_direction direction) +{ + return iommu_map_single(devnode_table(hwdev), vaddr, size, direction); +} + + +static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + iommu_unmap_single(devnode_table(hwdev), dma_handle, size, direction); +} + + +static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + return iommu_map_sg(pdev, devnode_table(pdev), sglist, + nelems, direction); +} + +static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + iommu_unmap_sg(devnode_table(pdev), sglist, nelems, direction); +} + +/* We support DMA to/from any memory page via the iommu */ +static int pci_iommu_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +void pci_iommu_init(void) +{ + pci_dma_ops.alloc_coherent = pci_iommu_alloc_coherent; + pci_dma_ops.free_coherent = pci_iommu_free_coherent; + pci_dma_ops.map_single = pci_iommu_map_single; + pci_dma_ops.unmap_single = pci_iommu_unmap_single; + pci_dma_ops.map_sg = pci_iommu_map_sg; + pci_dma_ops.unmap_sg = pci_iommu_unmap_sg; + pci_dma_ops.dma_supported = pci_iommu_dma_supported; +} diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index e7ca5b1f591e..06d5ef501218 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,4 +4,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_event.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o + +obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o +obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c new file mode 100644 index 000000000000..138e128a3886 --- /dev/null +++ b/arch/powerpc/platforms/pseries/hvconsole.c @@ -0,0 +1,74 @@ +/* + * hvconsole.c + * Copyright (C) 2004 Hollis Blanchard, IBM Corporation + * Copyright (C) 2004 IBM Corporation + * + * Additional Author(s): + * Ryan S. Arnold + * + * LPAR console support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +/** + * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper + * @vtermno: The vtermno or unit_address of the adapter from which to fetch the + * data. + * @buf: The character buffer into which to put the character data fetched from + * firmware. + * @count: not used? + */ +int hvc_get_chars(uint32_t vtermno, char *buf, int count) +{ + unsigned long got; + + if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got, + (unsigned long *)buf, (unsigned long *)buf+1) == H_Success) + return got; + return 0; +} + +EXPORT_SYMBOL(hvc_get_chars); + + +/** + * hvc_put_chars: send characters to firmware for denoted vterm adapter + * @vtermno: The vtermno or unit_address of the adapter from which the data + * originated. + * @buf: The character buffer that contains the character data to send to + * firmware. + * @count: Send this number of characters. + */ +int hvc_put_chars(uint32_t vtermno, const char *buf, int count) +{ + unsigned long *lbuf = (unsigned long *) buf; + long ret; + + ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0], + lbuf[1]); + if (ret == H_Success) + return count; + if (ret == H_Busy) + return 0; + return -EIO; +} + +EXPORT_SYMBOL(hvc_put_chars); diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c new file mode 100644 index 000000000000..4d584172055a --- /dev/null +++ b/arch/powerpc/platforms/pseries/hvcserver.c @@ -0,0 +1,251 @@ +/* + * hvcserver.c + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * PPC64 virtual I/O console server support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include + +#define HVCS_ARCH_VERSION "1.0.0" + +MODULE_AUTHOR("Ryan S. Arnold "); +MODULE_DESCRIPTION("IBM hvcs ppc64 API"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(HVCS_ARCH_VERSION); + +/* + * Convert arch specific return codes into relevant errnos. The hvcs + * functions aren't performance sensitive, so this conversion isn't an + * issue. + */ +int hvcs_convert(long to_convert) +{ + switch (to_convert) { + case H_Success: + return 0; + case H_Parameter: + return -EINVAL; + case H_Hardware: + return -EIO; + case H_Busy: + case H_LongBusyOrder1msec: + case H_LongBusyOrder10msec: + case H_LongBusyOrder100msec: + case H_LongBusyOrder1sec: + case H_LongBusyOrder10sec: + case H_LongBusyOrder100sec: + return -EBUSY; + case H_Function: /* fall through */ + default: + return -EPERM; + } +} + +/** + * hvcs_free_partner_info - free pi allocated by hvcs_get_partner_info + * @head: list_head pointer for an allocated list of partner info structs to + * free. + * + * This function is used to free the partner info list that was returned by + * calling hvcs_get_partner_info(). + */ +int hvcs_free_partner_info(struct list_head *head) +{ + struct hvcs_partner_info *pi; + struct list_head *element; + + if (!head) + return -EINVAL; + + while (!list_empty(head)) { + element = head->next; + pi = list_entry(element, struct hvcs_partner_info, node); + list_del(element); + kfree(pi); + } + + return 0; +} +EXPORT_SYMBOL(hvcs_free_partner_info); + +/* Helper function for hvcs_get_partner_info */ +int hvcs_next_partner(uint32_t unit_address, + unsigned long last_p_partition_ID, + unsigned long last_p_unit_address, unsigned long *pi_buff) + +{ + long retval; + retval = plpar_hcall_norets(H_VTERM_PARTNER_INFO, unit_address, + last_p_partition_ID, + last_p_unit_address, virt_to_phys(pi_buff)); + return hvcs_convert(retval); +} + +/** + * hvcs_get_partner_info - Get all of the partner info for a vty-server adapter + * @unit_address: The unit_address of the vty-server adapter for which this + * function is fetching partner info. + * @head: An initialized list_head pointer to an empty list to use to return the + * list of partner info fetched from the hypervisor to the caller. + * @pi_buff: A page sized buffer pre-allocated prior to calling this function + * that is to be used to be used by firmware as an iterator to keep track + * of the partner info retrieval. + * + * This function returns non-zero on success, or if there is no partner info. + * + * The pi_buff is pre-allocated prior to calling this function because this + * function may be called with a spin_lock held and kmalloc of a page is not + * recommended as GFP_ATOMIC. + * + * The first long of this buffer is used to store a partner unit address. The + * second long is used to store a partner partition ID and starting at + * pi_buff[2] is the 79 character Converged Location Code (diff size than the + * unsigned longs, hence the casting mumbo jumbo you see later). + * + * Invocation of this function should always be followed by an invocation of + * hvcs_free_partner_info() using a pointer to the SAME list head instance + * that was passed as a parameter to this function. + */ +int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head, + unsigned long *pi_buff) +{ + /* + * Dealt with as longs because of the hcall interface even though the + * values are uint32_t. + */ + unsigned long last_p_partition_ID; + unsigned long last_p_unit_address; + struct hvcs_partner_info *next_partner_info = NULL; + int more = 1; + int retval; + + memset(pi_buff, 0x00, PAGE_SIZE); + /* invalid parameters */ + if (!head || !pi_buff) + return -EINVAL; + + last_p_partition_ID = last_p_unit_address = ~0UL; + INIT_LIST_HEAD(head); + + do { + retval = hvcs_next_partner(unit_address, last_p_partition_ID, + last_p_unit_address, pi_buff); + if (retval) { + /* + * Don't indicate that we've failed if we have + * any list elements. + */ + if (!list_empty(head)) + return 0; + return retval; + } + + last_p_partition_ID = pi_buff[0]; + last_p_unit_address = pi_buff[1]; + + /* This indicates that there are no further partners */ + if (last_p_partition_ID == ~0UL + && last_p_unit_address == ~0UL) + break; + + /* This is a very small struct and will be freed soon in + * hvcs_free_partner_info(). */ + next_partner_info = kmalloc(sizeof(struct hvcs_partner_info), + GFP_ATOMIC); + + if (!next_partner_info) { + printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to" + " allocate partner info struct.\n"); + hvcs_free_partner_info(head); + return -ENOMEM; + } + + next_partner_info->unit_address + = (unsigned int)last_p_unit_address; + next_partner_info->partition_ID + = (unsigned int)last_p_partition_ID; + + /* copy the Null-term char too */ + strncpy(&next_partner_info->location_code[0], + (char *)&pi_buff[2], + strlen((char *)&pi_buff[2]) + 1); + + list_add_tail(&(next_partner_info->node), head); + next_partner_info = NULL; + + } while (more); + + return 0; +} +EXPORT_SYMBOL(hvcs_get_partner_info); + +/** + * hvcs_register_connection - establish a connection between this vty-server and + * a vty. + * @unit_address: The unit address of the vty-server adapter that is to be + * establish a connection. + * @p_partition_ID: The partition ID of the vty adapter that is to be connected. + * @p_unit_address: The unit address of the vty adapter to which the vty-server + * is to be connected. + * + * If this function is called once and -EINVAL is returned it may + * indicate that the partner info needs to be refreshed for the + * target unit address at which point the caller must invoke + * hvcs_get_partner_info() and then call this function again. If, + * for a second time, -EINVAL is returned then it indicates that + * there is probably already a partner connection registered to a + * different vty-server adapter. It is also possible that a second + * -EINVAL may indicate that one of the parms is not valid, for + * instance if the link was removed between the vty-server adapter + * and the vty adapter that you are trying to open. Don't shoot the + * messenger. Firmware implemented it this way. + */ +int hvcs_register_connection( uint32_t unit_address, + uint32_t p_partition_ID, uint32_t p_unit_address) +{ + long retval; + retval = plpar_hcall_norets(H_REGISTER_VTERM, unit_address, + p_partition_ID, p_unit_address); + return hvcs_convert(retval); +} +EXPORT_SYMBOL(hvcs_register_connection); + +/** + * hvcs_free_connection - free the connection between a vty-server and vty + * @unit_address: The unit address of the vty-server that is to have its + * connection severed. + * + * This function is used to free the partner connection between a vty-server + * adapter and a vty adapter. + * + * If -EBUSY is returned continue to call this function until 0 is returned. + */ +int hvcs_free_connection(uint32_t unit_address) +{ + long retval; + retval = plpar_hcall_norets(H_FREE_VTERM, unit_address); + return hvcs_convert(retval); +} +EXPORT_SYMBOL(hvcs_free_connection); -- cgit v1.2.1 From 1dfc6772097ef4eadd39a10ce44557c782d5058e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 17:30:40 +1100 Subject: powerpc: Export a couple of prom functions These are needed by the TPM driver, apparently. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 6a5b468edb4d..3bf968e74095 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1368,6 +1368,7 @@ prom_n_addr_cells(struct device_node* np) /* No #address-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_addr_cells); int prom_n_size_cells(struct device_node* np) @@ -1383,6 +1384,7 @@ prom_n_size_cells(struct device_node* np) /* No #size-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_size_cells); /** * Work out the sense (active-low level / active-high edge) -- cgit v1.2.1 From 5be396b00ca0f2f769c55cf69bbd7c77451c925e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 17:31:55 +1100 Subject: powerpc: Mark PREP and embedded as broken for now These machines don't have working ARCH=powerpc support yet, so make them depend on BROKEN so people don't enable them inadvertently and get compile errors. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c5c3f4213cd9..94df74bcc0ee 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -261,7 +261,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 + depends on PPC32 && BROKEN config APUS bool "Amiga-APUS" @@ -305,7 +305,7 @@ config PPC_PMAC64 config PPC_PREP bool " PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 + depends on PPC_MULTIPLATFORM && PPC32 && BROKEN select PPC_I8259 select PPC_INDIRECT_PCI default y -- cgit v1.2.1 From cc657f53928997c65bf2409c45166c6ceee8d306 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 21:55:15 +1100 Subject: powerpc: Fix clearing of the FPSCR when invoking a signal handler As pointed out by Gary Byers, we were clearing the image of the FPSCR (floating point status and control register) in the thread_struct before copying it to the user stack when invoking a signal. Thus the task would see its FPSCR getting cleared when it took a signal. While fixing it I noticed that our swapcontext system call was also clearing FPSCR. It shouldn't, so I fixed that too. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_32.c | 7 +++++-- arch/powerpc/kernel/signal_64.c | 6 +++--- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 8bdf95b7e420..5a2eba60dd39 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -403,8 +403,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, ELF_NFPREG * sizeof(double))) return 1; - current->thread.fpscr.val = 0; /* turn off all fp exceptions */ - #ifdef CONFIG_ALTIVEC /* save altivec registers */ if (current->thread.used_vr) { @@ -818,6 +816,9 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, goto badframe; regs->link = (unsigned long) frame->tramp; } + + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; @@ -1097,6 +1098,8 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, regs->link = (unsigned long) frame->mctx.tramp; } + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 58194e150711..1decf2785530 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -131,9 +131,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); - /* Make sure signal doesn't get spurrious FP exceptions */ - current->thread.fpscr.val = 0; - #ifdef CONFIG_ALTIVEC err |= __put_user(v_regs, &sc->v_regs); @@ -423,6 +420,9 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, if (err) goto badframe; + /* Make sure signal handler doesn't get spurious FP exceptions */ + current->thread.fpscr.val = 0; + /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->thread.vdso_base) { regs->link = current->thread.vdso_base + vdso64_rt_sigtramp; -- cgit v1.2.1 From ba76cd575ffd461d83507c23cf53c78d56d1ea0a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 21:56:57 +1100 Subject: powerpc: Remove __init from a function used in suspend/resume. Suspend/resume on powermacs uses the pmac_get_boot_time function, so it can't be marked as __init. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/time.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index b1714f9bd920..feb0a94e7819 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -199,7 +199,8 @@ static unsigned long smu_get_time(void) #define smu_set_rtc_time(tm, spin) 0 #endif -unsigned long __init pmac_get_boot_time(void) +/* Can't be __init, it's called when suspending and resuming */ +unsigned long pmac_get_boot_time(void) { /* Get the time from the RTC, used only at boot time */ switch (sys_ctrler) { -- cgit v1.2.1