From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/m68k/mac/macints.c | 760 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 760 insertions(+) create mode 100644 arch/m68k/mac/macints.c (limited to 'arch/m68k/mac/macints.c') diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c new file mode 100644 index 000000000000..1809601ad903 --- /dev/null +++ b/arch/m68k/mac/macints.c @@ -0,0 +1,760 @@ +/* + * Macintosh interrupts + * + * General design: + * In contrary to the Amiga and Atari platforms, the Mac hardware seems to + * exclusively use the autovector interrupts (the 'generic level0-level7' + * interrupts with exception vectors 0x19-0x1f). The following interrupt levels + * are used: + * 1 - VIA1 + * - slot 0: one second interrupt (CA2) + * - slot 1: VBlank (CA1) + * - slot 2: ADB data ready (SR full) + * - slot 3: ADB data (CB2) + * - slot 4: ADB clock (CB1) + * - slot 5: timer 2 + * - slot 6: timer 1 + * - slot 7: status of IRQ; signals 'any enabled int.' + * + * 2 - VIA2 or RBV + * - slot 0: SCSI DRQ (CA2) + * - slot 1: NUBUS IRQ (CA1) need to read port A to find which + * - slot 2: /EXP IRQ (only on IIci) + * - slot 3: SCSI IRQ (CB2) + * - slot 4: ASC IRQ (CB1) + * - slot 5: timer 2 (not on IIci) + * - slot 6: timer 1 (not on IIci) + * - slot 7: status of IRQ; signals 'any enabled int.' + * + * 2 - OSS (IIfx only?) + * - slot 0: SCSI interrupt + * - slot 1: Sound interrupt + * + * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes: + * + * 3 - unused (?) + * + * 4 - SCC (slot number determined by reading RR3 on the SSC itself) + * - slot 1: SCC channel A + * - slot 2: SCC channel B + * + * 5 - unused (?) + * [serial errors or special conditions seem to raise level 6 + * interrupts on some models (LC4xx?)] + * + * 6 - off switch (?) + * + * For OSS Macintoshes (IIfx only at this point): + * + * 3 - Nubus interrupt + * - slot 0: Slot $9 + * - slot 1: Slot $A + * - slot 2: Slot $B + * - slot 3: Slot $C + * - slot 4: Slot $D + * - slot 5: Slot $E + * + * 4 - SCC IOP + * - slot 1: SCC channel A + * - slot 2: SCC channel B + * + * 5 - ISM IOP (ADB?) + * + * 6 - unused + * + * For PSC Macintoshes (660AV, 840AV): + * + * 3 - PSC level 3 + * - slot 0: MACE + * + * 4 - PSC level 4 + * - slot 1: SCC channel A interrupt + * - slot 2: SCC channel B interrupt + * - slot 3: MACE DMA + * + * 5 - PSC level 5 + * + * 6 - PSC level 6 + * + * Finally we have good 'ole level 7, the non-maskable interrupt: + * + * 7 - NMI (programmer's switch on the back of some Macs) + * Also RAM parity error on models which support it (IIc, IIfx?) + * + * The current interrupt logic looks something like this: + * + * - We install dispatchers for the autovector interrupts (1-7). These + * dispatchers are responsible for querying the hardware (the + * VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using + * this information a machspec interrupt number is generated by placing the + * index of the interrupt hardware into the low three bits and the original + * autovector interrupt number in the upper 5 bits. The handlers for the + * resulting machspec interrupt are then called. + * + * - Nubus is a special case because its interrupts are hidden behind two + * layers of hardware. Nubus interrupts come in as index 1 on VIA #2, + * which translates to IRQ number 17. In this spot we install _another_ + * dispatcher. This dispatcher finds the interrupting slot number (9-F) and + * then forms a new machspec interrupt number as above with the slot number + * minus 9 in the low three bits and the pseudo-level 7 in the upper five + * bits. The handlers for this new machspec interrupt number are then + * called. This puts Nubus interrupts into the range 56-62. + * + * - The Baboon interrupts (used on some PowerBooks) are an even more special + * case. They're hidden behind the Nubus slot $C interrupt thus adding a + * third layer of indirection. Why oh why did the Apple engineers do that? + * + * - We support "fast" and "slow" handlers, just like the Amiga port. The + * fast handlers are called first and with all interrupts disabled. They + * are expected to execute quickly (hence the name). The slow handlers are + * called last with interrupts enabled and the interrupt level restored. + * They must therefore be reentrant. + * + * TODO: + * + */ + +#include +#include +#include +#include +#include /* for intr_count */ +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEBUG_SPURIOUS +#define SHUTUP_SONIC + +/* + * The mac_irq_list array is an array of linked lists of irq_node_t nodes. + * Each node contains one handler to be called whenever the interrupt + * occurs, with fast handlers listed before slow handlers. + */ + +irq_node_t *mac_irq_list[NUM_MAC_SOURCES]; + +/* SCC interrupt mask */ + +static int scc_mask; + +/* + * VIA/RBV hooks + */ + +extern void via_init(void); +extern void via_register_interrupts(void); +extern void via_irq_enable(int); +extern void via_irq_disable(int); +extern void via_irq_clear(int); +extern int via_irq_pending(int); + +/* + * OSS hooks + */ + +extern int oss_present; + +extern void oss_init(void); +extern void oss_register_interrupts(void); +extern void oss_irq_enable(int); +extern void oss_irq_disable(int); +extern void oss_irq_clear(int); +extern int oss_irq_pending(int); + +/* + * PSC hooks + */ + +extern int psc_present; + +extern void psc_init(void); +extern void psc_register_interrupts(void); +extern void psc_irq_enable(int); +extern void psc_irq_disable(int); +extern void psc_irq_clear(int); +extern int psc_irq_pending(int); + +/* + * IOP hooks + */ + +extern void iop_register_interrupts(void); + +/* + * Baboon hooks + */ + +extern int baboon_present; + +extern void baboon_init(void); +extern void baboon_register_interrupts(void); +extern void baboon_irq_enable(int); +extern void baboon_irq_disable(int); +extern void baboon_irq_clear(int); +extern int baboon_irq_pending(int); + +/* + * SCC interrupt routines + */ + +static void scc_irq_enable(int); +static void scc_irq_disable(int); + +/* + * console_loglevel determines NMI handler function + */ + +extern irqreturn_t mac_bang(int, void *, struct pt_regs *); +irqreturn_t mac_nmi_handler(int, void *, struct pt_regs *); +irqreturn_t mac_debug_handler(int, void *, struct pt_regs *); + +/* #define DEBUG_MACINTS */ + +void mac_init_IRQ(void) +{ + int i; + +#ifdef DEBUG_MACINTS + printk("mac_init_IRQ(): Setting things up...\n"); +#endif + /* Initialize the IRQ handler lists. Initially each list is empty, */ + + for (i = 0; i < NUM_MAC_SOURCES; i++) { + mac_irq_list[i] = NULL; + } + + scc_mask = 0; + + /* Make sure the SONIC interrupt is cleared or things get ugly */ +#ifdef SHUTUP_SONIC + printk("Killing onboard sonic... "); + /* This address should hopefully be mapped already */ + if (hwreg_present((void*)(0x50f0a000))) { + *(long *)(0x50f0a014) = 0x7fffL; + *(long *)(0x50f0a010) = 0L; + } + printk("Done.\n"); +#endif /* SHUTUP_SONIC */ + + /* + * Now register the handlers for the master IRQ handlers + * at levels 1-7. Most of the work is done elsewhere. + */ + + if (oss_present) { + oss_register_interrupts(); + } else { + via_register_interrupts(); + } + if (psc_present) psc_register_interrupts(); + if (baboon_present) baboon_register_interrupts(); + iop_register_interrupts(); + cpu_request_irq(7, mac_nmi_handler, IRQ_FLG_LOCK, "NMI", + mac_nmi_handler); +#ifdef DEBUG_MACINTS + printk("mac_init_IRQ(): Done!\n"); +#endif +} + +/* + * Routines to work with irq_node_t's on linked lists lifted from + * the Amiga code written by Roman Zippel. + */ + +static inline void mac_insert_irq(irq_node_t **list, irq_node_t *node) +{ + unsigned long flags; + irq_node_t *cur; + + if (!node->dev_id) + printk("%s: Warning: dev_id of %s is zero\n", + __FUNCTION__, node->devname); + + local_irq_save(flags); + + cur = *list; + + if (node->flags & IRQ_FLG_FAST) { + node->flags &= ~IRQ_FLG_SLOW; + while (cur && cur->flags & IRQ_FLG_FAST) { + list = &cur->next; + cur = cur->next; + } + } else if (node->flags & IRQ_FLG_SLOW) { + while (cur) { + list = &cur->next; + cur = cur->next; + } + } else { + while (cur && !(cur->flags & IRQ_FLG_SLOW)) { + list = &cur->next; + cur = cur->next; + } + } + + node->next = cur; + *list = node; + + local_irq_restore(flags); +} + +static inline void mac_delete_irq(irq_node_t **list, void *dev_id) +{ + unsigned long flags; + irq_node_t *node; + + local_irq_save(flags); + + for (node = *list; node; list = &node->next, node = *list) { + if (node->dev_id == dev_id) { + *list = node->next; + /* Mark it as free. */ + node->handler = NULL; + local_irq_restore(flags); + return; + } + } + local_irq_restore(flags); + printk ("%s: tried to remove invalid irq\n", __FUNCTION__); +} + +/* + * Call all the handlers for a given interrupt. Fast handlers are called + * first followed by slow handlers. + * + * This code taken from the original Amiga code written by Roman Zippel. + */ + +void mac_do_irq_list(int irq, struct pt_regs *fp) +{ + irq_node_t *node, *slow_nodes; + unsigned long flags; + + kstat_cpu(0).irqs[irq]++; + +#ifdef DEBUG_SPURIOUS + if (!mac_irq_list[irq] && (console_loglevel > 7)) { + printk("mac_do_irq_list: spurious interrupt %d!\n", irq); + return; + } +#endif + + /* serve first fast and normal handlers */ + for (node = mac_irq_list[irq]; + node && (!(node->flags & IRQ_FLG_SLOW)); + node = node->next) + node->handler(irq, node->dev_id, fp); + if (!node) return; + local_save_flags(flags); + local_irq_restore((flags & ~0x0700) | (fp->sr & 0x0700)); + /* if slow handlers exists, serve them now */ + slow_nodes = node; + for (; node; node = node->next) { + node->handler(irq, node->dev_id, fp); + } +} + +/* + * mac_enable_irq - enable an interrupt source + * mac_disable_irq - disable an interrupt source + * mac_clear_irq - clears a pending interrupt + * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending) + * + * These routines are just dispatchers to the VIA/OSS/PSC routines. + */ + +void mac_enable_irq (unsigned int irq) +{ + int irq_src = IRQ_SRC(irq); + + switch(irq_src) { + case 1: via_irq_enable(irq); + break; + case 2: + case 7: if (oss_present) { + oss_irq_enable(irq); + } else { + via_irq_enable(irq); + } + break; + case 3: + case 4: + case 5: + case 6: if (psc_present) { + psc_irq_enable(irq); + } else if (oss_present) { + oss_irq_enable(irq); + } else if (irq_src == 4) { + scc_irq_enable(irq); + } + break; + case 8: if (baboon_present) { + baboon_irq_enable(irq); + } + break; + } +} + +void mac_disable_irq (unsigned int irq) +{ + int irq_src = IRQ_SRC(irq); + + switch(irq_src) { + case 1: via_irq_disable(irq); + break; + case 2: + case 7: if (oss_present) { + oss_irq_disable(irq); + } else { + via_irq_disable(irq); + } + break; + case 3: + case 4: + case 5: + case 6: if (psc_present) { + psc_irq_disable(irq); + } else if (oss_present) { + oss_irq_disable(irq); + } else if (irq_src == 4) { + scc_irq_disable(irq); + } + break; + case 8: if (baboon_present) { + baboon_irq_disable(irq); + } + break; + } +} + +void mac_clear_irq( unsigned int irq ) +{ + switch(IRQ_SRC(irq)) { + case 1: via_irq_clear(irq); + break; + case 2: + case 7: if (oss_present) { + oss_irq_clear(irq); + } else { + via_irq_clear(irq); + } + break; + case 3: + case 4: + case 5: + case 6: if (psc_present) { + psc_irq_clear(irq); + } else if (oss_present) { + oss_irq_clear(irq); + } + break; + case 8: if (baboon_present) { + baboon_irq_clear(irq); + } + break; + } +} + +int mac_irq_pending( unsigned int irq ) +{ + switch(IRQ_SRC(irq)) { + case 1: return via_irq_pending(irq); + case 2: + case 7: if (oss_present) { + return oss_irq_pending(irq); + } else { + return via_irq_pending(irq); + } + case 3: + case 4: + case 5: + case 6: if (psc_present) { + return psc_irq_pending(irq); + } else if (oss_present) { + return oss_irq_pending(irq); + } + } + return 0; +} + +/* + * Add an interrupt service routine to an interrupt source. + * Returns 0 on success. + * + * FIXME: You can register interrupts on nonexistent source (ie PSC4 on a + * non-PSC machine). We should return -EINVAL in those cases. + */ + +int mac_request_irq(unsigned int irq, + irqreturn_t (*handler)(int, void *, struct pt_regs *), + unsigned long flags, const char *devname, void *dev_id) +{ + irq_node_t *node; + +#ifdef DEBUG_MACINTS + printk ("%s: irq %d requested for %s\n", __FUNCTION__, irq, devname); +#endif + + if (irq < VIA1_SOURCE_BASE) { + return cpu_request_irq(irq, handler, flags, devname, dev_id); + } + + if (irq >= NUM_MAC_SOURCES) { + printk ("%s: unknown irq %d requested by %s\n", + __FUNCTION__, irq, devname); + } + + /* Get a node and stick it onto the right list */ + + if (!(node = new_irq_node())) return -ENOMEM; + + node->handler = handler; + node->flags = flags; + node->dev_id = dev_id; + node->devname = devname; + node->next = NULL; + mac_insert_irq(&mac_irq_list[irq], node); + + /* Now enable the IRQ source */ + + mac_enable_irq(irq); + + return 0; +} + +/* + * Removes an interrupt service routine from an interrupt source. + */ + +void mac_free_irq(unsigned int irq, void *dev_id) +{ +#ifdef DEBUG_MACINTS + printk ("%s: irq %d freed by %p\n", __FUNCTION__, irq, dev_id); +#endif + + if (irq < VIA1_SOURCE_BASE) { + cpu_free_irq(irq, dev_id); + return; + } + + if (irq >= NUM_MAC_SOURCES) { + printk ("%s: unknown irq %d freed\n", + __FUNCTION__, irq); + return; + } + + mac_delete_irq(&mac_irq_list[irq], dev_id); + + /* If the list for this interrupt is */ + /* empty then disable the source. */ + + if (!mac_irq_list[irq]) { + mac_disable_irq(irq); + } +} + +/* + * Generate a pretty listing for /proc/interrupts + * + * By the time we're called the autovector interrupt list has already been + * generated, so we just need to do the machspec interrupts. + * + * 990506 (jmt) - rewritten to handle chained machspec interrupt handlers. + * Also removed display of num_spurious it is already + * displayed for us as autovector irq 0. + */ + +int show_mac_interrupts(struct seq_file *p, void *v) +{ + int i; + irq_node_t *node; + char *base; + + /* Don't do Nubus interrupts in this loop; we do them separately */ + /* below so that we can print slot numbers instead of IRQ numbers */ + + for (i = VIA1_SOURCE_BASE ; i < NUM_MAC_SOURCES ; ++i) { + + /* Nonexistant interrupt or nothing registered; skip it. */ + + if ((node = mac_irq_list[i]) == NULL) continue; + if (node->flags & IRQ_FLG_STD) continue; + + base = ""; + switch(IRQ_SRC(i)) { + case 1: base = "via1"; + break; + case 2: if (oss_present) { + base = "oss"; + } else { + base = "via2"; + } + break; + case 3: + case 4: + case 5: + case 6: if (psc_present) { + base = "psc"; + } else if (oss_present) { + base = "oss"; + } else { + if (IRQ_SRC(i) == 4) base = "scc"; + } + break; + case 7: base = "nbus"; + break; + case 8: base = "bbn"; + break; + } + seq_printf(p, "%4s %2d: %10u ", base, i, kstat_cpu(0).irqs[i]); + + do { + if (node->flags & IRQ_FLG_FAST) { + seq_puts(p, "F "); + } else if (node->flags & IRQ_FLG_SLOW) { + seq_puts(p, "S "); + } else { + seq_puts(p, " "); + } + seq_printf(p, "%s\n", node->devname); + if ((node = node->next)) { + seq_puts(p, " "); + } + } while(node); + + } + return 0; +} + +void mac_default_handler(int irq, void *dev_id, struct pt_regs *regs) +{ +#ifdef DEBUG_SPURIOUS + printk("Unexpected IRQ %d on device %p\n", irq, dev_id); +#endif +} + +static int num_debug[8]; + +irqreturn_t mac_debug_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + if (num_debug[irq] < 10) { + printk("DEBUG: Unexpected IRQ %d\n", irq); + num_debug[irq]++; + } + return IRQ_HANDLED; +} + +static int in_nmi; +static volatile int nmi_hold; + +irqreturn_t mac_nmi_handler(int irq, void *dev_id, struct pt_regs *fp) +{ + int i; + /* + * generate debug output on NMI switch if 'debug' kernel option given + * (only works with Penguin!) + */ + + in_nmi++; + for (i=0; i<100; i++) + udelay(1000); + + if (in_nmi == 1) { + nmi_hold = 1; + printk("... pausing, press NMI to resume ..."); + } else { + printk(" ok!\n"); + nmi_hold = 0; + } + + barrier(); + + while (nmi_hold == 1) + udelay(1000); + + if ( console_loglevel >= 8 ) { +#if 0 + show_state(); + printk("PC: %08lx\nSR: %04x SP: %p\n", fp->pc, fp->sr, fp); + printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", + fp->d0, fp->d1, fp->d2, fp->d3); + printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", + fp->d4, fp->d5, fp->a0, fp->a1); + + if (STACK_MAGIC != *(unsigned long *)current->kernel_stack_page) + printk("Corrupted stack page\n"); + printk("Process %s (pid: %d, stackpage=%08lx)\n", + current->comm, current->pid, current->kernel_stack_page); + if (intr_count == 1) + dump_stack((struct frame *)fp); +#else + /* printk("NMI "); */ +#endif + } + in_nmi--; + return IRQ_HANDLED; +} + +/* + * Simple routines for masking and unmasking + * SCC interrupts in cases where this can't be + * done in hardware (only the PSC can do that.) + */ + +static void scc_irq_enable(int irq) { + int irq_idx = IRQ_IDX(irq); + + scc_mask |= (1 << irq_idx); +} + +static void scc_irq_disable(int irq) { + int irq_idx = IRQ_IDX(irq); + + scc_mask &= ~(1 << irq_idx); +} + +/* + * SCC master interrupt handler. We have to do a bit of magic here + * to figure out what channel gave us the interrupt; putting this + * here is cleaner than hacking it into drivers/char/macserial.c. + */ + +void mac_scc_dispatch(int irq, void *dev_id, struct pt_regs *regs) +{ + volatile unsigned char *scc = (unsigned char *) mac_bi_data.sccbase + 2; + unsigned char reg; + unsigned long flags; + + /* Read RR3 from the chip. Always do this on channel A */ + /* This must be an atomic operation so disable irqs. */ + + local_irq_save(flags); + *scc = 3; + reg = *scc; + local_irq_restore(flags); + + /* Now dispatch. Bits 0-2 are for channel B and */ + /* bits 3-5 are for channel A. We can safely */ + /* ignore the remaining bits here. */ + /* */ + /* Note that we're ignoring scc_mask for now. */ + /* If we actually mask the ints then we tend to */ + /* get hammered by very persistent SCC irqs, */ + /* and since they're autovector interrupts they */ + /* pretty much kill the system. */ + + if (reg & 0x38) mac_do_irq_list(IRQ_SCCA, regs); + if (reg & 0x07) mac_do_irq_list(IRQ_SCCB, regs); +} -- cgit v1.2.1