From 72cc205611879525db0374d9831f84f787112b25 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 14 Sep 2011 01:22:05 -0400
Subject: ARM: Dove: fix second SPI initialization call

Commit 980f9f601a "ARM: orion: Consolidate SPI initialization."
broke it by overwriting the SPI0 registration.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-dove/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 83dce859886d..a9e0dae86a26 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************
-- 
cgit v1.2.1


From f630c1bdfbf8fe423325beaf60027cfc7fd7c610 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 15 Sep 2011 11:45:15 +0100
Subject: ARM: 7091/1: errata: D-cache line maintenance operation by MVA may
 not succeed

This patch implements a workaround for erratum 764369 affecting
Cortex-A9 MPCore with two or more processors (all current revisions).
Under certain timing circumstances, a data cache line maintenance
operation by MVA targeting an Inner Shareable memory region may fail to
proceed up to either the Point of Coherency or to the Point of
Unification of the system. This workaround adds a DSB instruction before
the relevant cache maintenance functions and sets a specific bit in the
diagnostic control register of the SCU.

Cc: <stable@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig          | 14 ++++++++++++++
 arch/arm/kernel/smp_scu.c | 10 ++++++++++
 arch/arm/mm/cache-v7.S    | 20 ++++++++++++++++++++
 3 files changed, 44 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3269576dbfa8..3146ed3f6eca 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 79ed5e7f204a..7fcddb75c877 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base)
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 3b24bfa3b828..07c4bc8ea0a4 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
  USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
 	add	r12, r12, r2
@@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area)
 	add	r1, r0, r1
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -247,6 +255,10 @@ v7_dma_inv_range:
 	sub	r3, r2, #1
 	tst	r0, r3
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 
 	tst	r1, r3
@@ -270,6 +282,10 @@ v7_dma_clean_range:
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
 	add	r0, r0, r2
@@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 	add	r0, r0, r2
-- 
cgit v1.2.1


From 4dfa33868d9f8595717047eb058322e0999691cc Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 17 Sep 2011 12:50:27 +0100
Subject: ARM: nommu: fix warning with checksyscalls.sh

  CALL    scripts/checksyscalls.sh
<stdin>:46:1: warning: "__IGNORE_migrate_pages" redefined
In file included from <stdin>:2:
arch/arm/include/asm/unistd.h:482:1: warning: this is the location of the previous definition

This is caused because we define __IGNORE_migrate_pages to be 1, but
in the case of nommu, it's defined to be empty.  Fix this by just
defining the __IGNORE_ symbols to be empty.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/unistd.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 2c04ed5efeb5..c60a2944f95b 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
-- 
cgit v1.2.1


From a0638eb6a2979840ff4cde19b100e96b97a91dfd Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Tue, 20 Sep 2011 10:46:25 -0600
Subject: arm/dt: Tegra: Update SDHCI nodes to match bindings

The bindings were recently updated to have separate properties for each
type of GPIO. Update the Device Tree source to match that.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/boot/dts/tegra-harmony.dts  | 12 ++++++------
 arch/arm/boot/dts/tegra-seaboard.dts |  6 +++---
 2 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 4c053340ce33..e5818668d091 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -57,14 +57,14 @@
 	};
 
 	sdhci@c8000200 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 155 0>; /* power, gpio PT3 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
 	sdhci@c8000600 {
-		gpios = <&gpio 58 0>, /* cd, gpio PH2 */
-			<&gpio 59 0>, /* wp, gpio PH3 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 1940cae00748..64cedca6fc79 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -21,8 +21,8 @@
 	};
 
 	sdhci@c8000400 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };
-- 
cgit v1.2.1


From b71d8429ec364ef8eada011dded2e23aaecde53e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 4 Sep 2011 23:40:08 +0200
Subject: mach-integrator: fix VGA base regression

The changes introduced in commit
cc22b4c18540e5e8bf55c7d124044f9317527d3c
"ARM: set vga memory base at run-time"

Makes the Integrator/AP freeze completely. I appears that
this is due to the VGA base address being assigned at PCI
init time, while this base is needed earlier than that.
Moving the initialization of the base address to the
.map_io function solves this problem.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-integrator/integrator_ap.c | 2 ++
 arch/arm/mach-integrator/pci_v3.c        | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index fcf0ae95651f..8cdc730dcb3a 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
+#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+	vga_base = PCI_MEMORY_VADDR;
 }
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index dd56bfb351e3..11b86e5b71c2 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,7 +27,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -505,7 +504,6 @@ void __init pci_v3_preinit(void)
 
 	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
-	vga_base = PCI_MEMORY_VADDR;
 
 	/*
 	 * Hook in our fault handler for PCI errors
-- 
cgit v1.2.1


From 6760b109603c794e4bd281c0014fef069c019b6a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 20 Sep 2011 23:35:15 +0100
Subject: ARM: fix vmlinux.lds.S discarding sections

We are seeing linker errors caused by sections being discarded, despite
the linker script trying to keep them.  The result is (eg):

`.exit.text' referenced in section `.alt.smp.init' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o
`.exit.text' referenced in section `.alt.smp.init' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o

This is the relevent part of the linker script (reformatted to make it
clearer):
| SECTIONS
| {
| /*
| * unwind exit sections must be discarded before the rest of the
| * unwind sections get included.
| */
| /DISCARD/ : {
| *(.ARM.exidx.exit.text)
| *(.ARM.extab.exit.text)
| }
| ...
| .exit.text : {
| *(.exit.text)
| *(.memexit.text)
| }
| ...
| /DISCARD/ : {
| *(.exit.text)
| *(.memexit.text)
| *(.exit.data)
| *(.memexit.data)
| *(.memexit.rodata)
| *(.exitcall.exit)
| *(.discard)
| *(.discard.*)
| }
| }

Now, this is what the linker manual says about discarded output sections:

|    The special output section name `/DISCARD/' may be used to discard
| input sections.  Any input sections which are assigned to an output
| section named `/DISCARD/' are not included in the output file.

No questions, no exceptions. It doesn't say "unless they are listed
before the /DISCARD/ section." Now, this is what asn-generic/vmlinux.lds.S
says:
| /*
|  * Default discarded sections.
|  *
|  * Some archs want to discard exit text/data at runtime rather than
|  * link time due to cross-section references such as alt instructions,
|  * bug table, eh_frame, etc. DISCARDS must be the last of output
|  * section definitions so that such archs put those in earlier section
|  * definitions.
|  */

And guess what - the list _always_ includes .exit.text etc.

Now, what's actually happening is that the linker is reading the script,
and it finds the first /DISCARD/ output section at the beginning of the
script. It continues reading the script, and finds the 'DISCARD' macro
at the end, which having been postprocessed results in another
/DISCARD/ output section. As the linker already contains the earlier
/DISCARD/ output section, it adds it to that existing section, so it
effectively is placed at the start. This can be seen by using the -M
option to ld:

| Linker script and memory map
|
|                 0xc037c080                jiffies = jiffies_64
|
| /DISCARD/
|  *(.ARM.exidx.exit.text)
|  *(.ARM.extab.exit.text)
|  *(.exit.text)
|  *(.memexit.text)
|  *(.exit.data)
|  *(.memexit.data)
|  *(.memexit.rodata)
|  *(.exitcall.exit)
|  *(.discard)
|  *(.discard.*)
|
|                 0xc0008000                . = 0xc0008000
|
| .head.text      0xc0008000      0x1d0
|                 0xc0008000                _text = .
|  *(.head.text)
|  .head.text     0xc0008000      0x1d0 arch/arm/kernel/head.o
|                 0xc0008000                stext
|
| .text           0xc0008200   0x2d78d0
|                 0xc0008200                _stext = .
|                 0xc0008200                __exception_text_start = .
|  *(.exception.text)
|  .exception.text
| ...

As you can see, all the discarded sections are grouped together - and
as a result of it being the first output section, they all appear before
any other section.

The result is that not only is the unwind information discarded (as
intended), but also the .exit.text, despite us wanting to have the
.exit.text preserved.

We can't move the unwind information elsewhere, because it'll then be
included even when we do actually discard the .exit.text (and similar)
sections.

So, work around this by avoiding the generic DISCARDS macro, and instead
conditionalize the sections to be discarded ourselves.  This avoids the
ambiguity in how the linker assigns input sections to output sections,
making our script less dependent on undocumented linker behaviour.

Reported-by: Rob Herring <robherring2@gmail.com>
Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/vmlinux.lds.S | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index bf977f8514f6..4e66f62b8d41 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@ SECTIONS
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@ SECTIONS
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@ SECTIONS
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*
-- 
cgit v1.2.1


From 4344646ff127eaea4d58266ccd8fdd2a38fb9672 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Mon, 26 Sep 2011 10:30:29 +0900
Subject: ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv

The changed statement should set the old armdiv bits to 0
and not everything else, before setting the new value.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index a1a7176675b9..38058af48972 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}
-- 
cgit v1.2.1


From b76f7cdca5af18fa7a59a5c8a9eb5e02418e827a Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 26 Sep 2011 13:16:45 +0900
Subject: ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt

Loop iterator value after terminating list_for_each_entry()
is not NULL. This patch fixes incorrect iterator usage in
GPIO interrupt code for SAMSUNG S5P platforms.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s5p/irq-gpioint.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f71078ef6bb5..f88216d23991 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
-	struct s5p_gpioint_bank *bank = NULL;
+	struct s5p_gpioint_bank *b, *bank = NULL;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
 		return -ENOMEM;
 
-	list_for_each_entry(bank, &banks, list) {
-		if (group >= bank->start &&
-		    group < bank->start + bank->nr_groups)
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
 			break;
+		}
 	}
 	if (!bank)
 		return -EINVAL;
-- 
cgit v1.2.1


From d8e89b47e00ee80e920761145144640aac4cf71a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 22 Sep 2011 10:32:25 +0100
Subject: ARM: dma-mapping: free allocated page if unable to map

If the attempt to map a page for DMA fails (eg, because we're out of
mapping space) then we must not hold on to the page we allocated for
DMA - doing so will result in a memory leak.

Cc: <stable@kernel.org>
Reported-by: Bryan Phillippe <bp@darkforest.org>
Tested-by: Bryan Phillippe <bp@darkforest.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/dma-mapping.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 0a0a1e7c20d2..c3ff82f92d9c 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+	else
+		__dma_free_buffer(page, size);
 
 	return addr;
 }
-- 
cgit v1.2.1


From df77abcafc8dc881b6c9347548651777088e4b27 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 23 Sep 2011 14:34:12 +0100
Subject: ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op

The SMP implementation of __futex_atomic_op clobbers oldval with the
status flag from the exclusive store. This causes it to always read as
zero when performing the FUTEX_OP_CMP_* operation.

This patch updates the ARM __futex_atomic_op implementations to take a
tmp argument, allowing us to store the strex status flag without
overwriting the register containing oldval.

Cc: stable@kernel.org
Reported-by: Minho Ban <mhban@samsung.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/futex.h | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 8c73900da9ed..253cc86318bf 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
-- 
cgit v1.2.1


From 83427c23a44e34be2985f5b1440c645ea8577938 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 27 Sep 2011 07:00:53 +0900
Subject: ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/clock.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e607bcc2..f5f8fa89679c 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 3),
 		},
@@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},
-- 
cgit v1.2.1


From 00aaad227aeb30800ac85b981f3ea4e20ae9bd9e Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 27 Sep 2011 07:00:59 +0900
Subject: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 79d6cd0c8e7b..86964d2e9e1b 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
-- 
cgit v1.2.1


From 1cb17e2dbd09436069733500ea48e0c9b1f0a1cc Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Sat, 8 Oct 2011 23:04:34 +0100
Subject: ep93xx: add support Vision EP9307 SoM

Add support for Vision Engraving Systems EP9307 based SoM.

Signed-off-by: Hartley Sweeten <hartleys@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-ep93xx/Kconfig         |   7 +
 arch/arm/mach-ep93xx/Makefile        |   1 +
 arch/arm/mach-ep93xx/vision_ep9307.c | 364 +++++++++++++++++++++++++++++++++++
 3 files changed, 372 insertions(+)
 create mode 100644 arch/arm/mach-ep93xx/vision_ep9307.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18f6433..97a249395b5a 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@ config MACH_TS72XX
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
 
+config MACH_VISION_EP9307
+	bool "Support Vision Engraving Systems EP9307 SoM"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Vision Engraving Systems EP9307 SoM.
+
 choice
 	prompt "Select a UART for early kernel messages"
 
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2d39e5..574209d9e246 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
 obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 000000000000..10f6488f6e44
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE	EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE	0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+	{
+		.virtual	= VISION_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VISION_PHYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init vision_map_io(void)
+{
+	ep93xx_map_io();
+
+	iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+	.phy_id		= 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE	EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+	int err;
+
+	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+				dev_name(&pdev->dev));
+	if (err)
+		return err;
+
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+				 EP93XX_SYSCON_DEVCFG_RASONP3 |
+				 EP93XX_SYSCON_DEVCFG_EXVC);
+
+	return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+	gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+	if (blank_mode)
+		gpio_set_value(VISION_LCD_ENABLE, 0);
+	else
+		gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+	.num_modes	= EP93XXFB_USE_MODEDB,
+	.bpp		= 16,
+	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+	.setup		= vision_lcd_setup,
+	.teardown	= vision_lcd_teardown,
+	.blank		= vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE	(EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE	(PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE	(PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE	(PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+	.gpio_base	= PCA9539_74_GPIO_BASE,
+	.irq_base	= EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+	.gpio_base	= PCA9539_75_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+	.gpio_base	= PCA9539_76_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+	.gpio_base	= PCA9539_77_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+		.irq		= IRQ_EP93XX_EXT1,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x74),
+		.platform_data	= &pca953x_74_gpio_data,
+		.irq		= gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x75),
+		.platform_data	= &pca953x_75_gpio_data,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x76),
+		.platform_data	= &pca953x_76_gpio_data,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x77),
+		.platform_data	= &pca953x_77_gpio_data,
+	},
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+	{
+		.name	= "SPI bootstrap",
+		.offset	= 0,
+		.size	= SZ_4K,
+	}, {
+		.name	= "Bootstrap config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4K,
+	}, {
+		.name	= "System config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+	.name		= "SPI Flash",
+	.parts		= vision_spi_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+				spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+	.setup		= vision_spi_flash_hw_setup,
+	.cleanup	= vision_spi_flash_hw_cleanup,
+	.cs_control	= vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS	EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+	{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+	{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+			irqreturn_t (*func)(int, void *), void *pdata)
+{
+	int err;
+
+	err = gpio_request_array(vision_spi_mmc_gpios,
+				 ARRAY_SIZE(vision_spi_mmc_gpios));
+	if (err)
+		return err;
+
+	err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+	if (err)
+		goto exit_err;
+
+	err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+			IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+	if (err)
+		goto exit_err;
+
+	return 0;
+
+exit_err:
+	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+	return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+	free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+	return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+	return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+	.init		= vision_spi_mmc_init,
+	.exit		= vision_spi_mmc_exit,
+	.get_ro		= vision_spi_mmc_get_ro,
+	.get_cd		= vision_spi_mmc_get_cd,
+	.detect_delay	= 100,
+	.powerup_msecs	= 100,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+				spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+	.setup		= vision_spi_mmc_hw_setup,
+	.cleanup	= vision_spi_mmc_hw_cleanup,
+	.cs_control	= vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+	{
+		.modalias		= "sst25l",
+		.platform_data		= &vision_spi_flash_data,
+		.controller_data	= &vision_spi_flash_hw,
+		.max_speed_hz		= 20000000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	}, {
+		.modalias		= "mmc_spi",
+		.platform_data		= &vision_spi_mmc_data,
+		.controller_data	= &vision_spi_mmc_hw,
+		.max_speed_hz		= 20000000,
+		.bus_num		= 0,
+		.chip_select		= 1,
+		.mode			= SPI_MODE_3,
+	},
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+	.num_chipselect		= ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+	ep93xx_init_devices();
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+	ep93xx_register_eth(&vision_eth_data, 1);
+	ep93xx_register_fb(&ep93xxfb_info);
+	ep93xx_register_pwm(1, 0);
+
+	/*
+	 * Request the gpio expander's interrupt gpio line now to prevent
+	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+	 */
+	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+				"pca9539:74"))
+		pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+				ARRAY_SIZE(vision_i2c_info));
+	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+				ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= vision_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= vision_init_machine,
+MACHINE_END
-- 
cgit v1.2.1