From 4f48b7fc5ab6286ab4a9522928aa1acc163a4bf3 Mon Sep 17 00:00:00 2001 From: Alan M Butler Date: Mon, 20 Aug 2012 15:29:07 +0100 Subject: ARM: Kirkwood: Iomega ix2-200 DT support Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Kconfig | 7 ++++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 1 + arch/arm/mach-kirkwood/board-dt.c | 4 ++ arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 57 +++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 6 +++ 6 files changed, 76 insertions(+) create mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca5c15a4e626..76bc8473f1a1 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -109,6 +109,13 @@ config MACH_LSXL_DT Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using Flattened Device Tree. +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a1cc46..f5484dcca9fc 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a13299d758e1..32fe72630062 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -12,3 +12,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450de301..9b3ec175e40b 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -87,6 +87,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); + if (of_machine_is_compatible("iom,ix2-200")) + iomega_ix2_200_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -100,6 +103,7 @@ static const char *kirkwood_dt_board_compat[] = { "qnap,ts219", "seagate,goflexnet", "buffalo,lsxl", + "iom,ix2-200", NULL }; diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c new file mode 100644 index 000000000000..158fb97d0397 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-kirkwood/board-iomega_ix2_200.c + * + * Iomega StorCenter ix2-200 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static unsigned int iomega_ix2_200_mpp_config[] __initdata = { + MPP12_GPIO, /* Reset Button */ + MPP14_GPIO, /* Power Button */ + MPP15_GPIO, /* Backup LED (blue) */ + MPP16_GPIO, /* Power LED (white) */ + MPP35_GPIO, /* OTB Button */ + MPP36_GPIO, /* Rebuild LED (white) */ + MPP37_GPIO, /* Health LED (red) */ + MPP38_GPIO, /* SATA LED brightness control 1 */ + MPP39_GPIO, /* SATA LED brightness control 2 */ + MPP40_GPIO, /* Backup LED brightness control 1 */ + MPP41_GPIO, /* Backup LED brightness control 2 */ + MPP42_GPIO, /* Power LED brightness control 1 */ + MPP43_GPIO, /* Power LED brightness control 2 */ + MPP44_GPIO, /* Health LED brightness control 1 */ + MPP45_GPIO, /* Health LED brightness control 2 */ + MPP46_GPIO, /* Rebuild LED brightness control 1 */ + MPP47_GPIO, /* Rebuild LED brightness control 2 */ + 0 +}; + +void __init iomega_ix2_200_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(iomega_ix2_200_mpp_config); + + kirkwood_ehci_init(); + + kirkwood_ge01_init(&iomega_ix2_200_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 304dd1abfdca..d5d406469b74 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -94,6 +94,12 @@ void lsxl_init(void); static inline void lsxl_init(void) {}; #endif +#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT +void iomega_ix2_200_init(void); +#else +static inline void iomega_ix2_200_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v1.2.1 From dd88db78daafb008b8e732dc1224812c93dc228a Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 14 Aug 2012 22:43:41 +0200 Subject: ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar This add a DT compatible board specific setup for the Seagate FreeAgent Dockstar. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Kconfig | 7 ++++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/board-dockstar.c | 61 +++++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/board-dt.c | 4 +++ arch/arm/mach-kirkwood/common.h | 6 ++++ 5 files changed, 79 insertions(+) create mode 100644 arch/arm/mach-kirkwood/board-dockstar.c (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 76bc8473f1a1..d033b7acead7 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -94,6 +94,13 @@ config MACH_TS219_DT or MV6282. If you have the wrong one, the buttons will not work. +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). + config MACH_GOFLEXNET_DT bool "Seagate GoFlex Net (Flattened Device Tree)" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index f5484dcca9fc..d809cd542a00 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c new file mode 100644 index 000000000000..6beff21b4a0d --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -0,0 +1,61 @@ +/* + * arch/arm/mach-kirkwood/board-dockstar.c + * + * Seagate FreeAgent Dockstar Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED green */ + MPP47_GPIO, /* LED orange */ + 0 +}; + +void __init dockstar_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dockstar_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 9b3ec175e40b..30a4caa2b76c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -81,6 +81,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("qnap,ts219")) qnap_dt_ts219_init(); + if (of_machine_is_compatible("seagate,dockstar")) + dockstar_dt_init(); + if (of_machine_is_compatible("seagate,goflexnet")) goflexnet_init(); @@ -101,6 +104,7 @@ static const char *kirkwood_dt_board_compat[] = { "iom,iconnect", "raidsonic,ib-nas62x0", "qnap,ts219", + "seagate,dockstar", "seagate,goflexnet", "buffalo,lsxl", "iom,ix2-200", diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index d5d406469b74..8f2520fa0562 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -82,6 +82,12 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_DOCKSTAR_DT +void dockstar_dt_init(void); +#else +static inline void dockstar_dt_init(void) {}; +#endif + #ifdef CONFIG_MACH_GOFLEXNET_DT void goflexnet_init(void); #else -- cgit v1.2.1 From 2f865c3548e78232baa3f9b41f516055cf3c4770 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 14 Aug 2012 22:43:42 +0200 Subject: ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar This adds the corresponding device tree descriptor for the Seagate FreeAgent Dockstar based on Kirkwood DT. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Makefile.boot | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 32fe72630062..892ce4c8d36c 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -13,3 +13,4 @@ dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb +dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb -- cgit v1.2.1 From 0510c8a014432b45f09509d1fb450922ec96b40d Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Tue, 4 Sep 2012 11:55:02 +0200 Subject: ARM: initial DTS support for km_kirkwood This is a first attempt to support the km_kirkwood reference design with a device tree. This km_kirkwood design is present in many Keymile products. It is based on the Marvell Bobcat SOC which integrates a Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC is very similar to the "normal" one, but there are a few differences. This initial support is minimal: the kernel can boot with network (ge0), serial port and NAND functional. Signed-off-by: Valentin Longchamp Cc: Holger Brunck Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Kconfig | 7 ++++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 1 + arch/arm/mach-kirkwood/board-dt.c | 4 +++ arch/arm/mach-kirkwood/board-km_kirkwood.c | 57 ++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 6 ++++ 6 files changed, 76 insertions(+) create mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c (limited to 'arch/arm/mach-kirkwood') diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index d033b7acead7..50bca5032b7e 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -123,6 +123,13 @@ config MACH_IOMEGA_IX2_200_DT Say 'Y' here if you want your kernel to support the Iomega StorCenter ix2-200 (Flattened Device Tree). +config MACH_KM_KIRKWOOD_DT + bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Keymile Kirkwood Reference Desgin, using Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d809cd542a00..294779f892d9 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o +obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 892ce4c8d36c..5edef8ef34bf 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -14,3 +14,4 @@ dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb +dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 30a4caa2b76c..496554664e08 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -93,6 +93,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("iom,ix2-200")) iomega_ix2_200_init(); + if (of_machine_is_compatible("keymile,km_kirkwood")) + km_kirkwood_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -108,6 +111,7 @@ static const char *kirkwood_dt_board_compat[] = { "seagate,goflexnet", "buffalo,lsxl", "iom,ix2-200", + "keymile,km_kirkwood", NULL }; diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c new file mode 100644 index 000000000000..f7d32834b757 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -0,0 +1,57 @@ +/* + * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern + * Valentin Longchamp + * + * arch/arm/mach-kirkwood/board-km_kirkwood.c + * + * Keymile km_kirkwood Reference Desing Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int km_kirkwood_mpp_config[] __initdata = { + MPP8_GPIO, /* I2C SDA */ + MPP9_GPIO, /* I2C SCL */ + 0 +}; + +void __init km_kirkwood_init(void) +{ + struct clk *sata_clk; + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(km_kirkwood_mpp_config); + + /* + * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing + * SATA bits (14-15) of the Clock Gating Control Register. Since these + * devices are also not present in this variant, their clocks get + * disabled because unused when clk_disable_unused() gets called. + * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED + */ + sata_clk = clk_get_sys("sata_mv.0", "0"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + sata_clk = clk_get_sys("sata_mv.0", "1"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + + kirkwood_ehci_init(); + kirkwood_ge00_init(&km_kirkwood_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 8f2520fa0562..bcffd7ca1ca2 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -106,6 +106,12 @@ void iomega_ix2_200_init(void); static inline void iomega_ix2_200_init(void) {}; #endif +#ifdef CONFIG_MACH_KM_KIRKWOOD_DT +void km_kirkwood_init(void); +#else +static inline void km_kirkwood_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v1.2.1