From 8aeeda822fbfe7da2d4ea391a9757e9532796598 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 22 Oct 2010 17:53:39 +0200 Subject: AT91: pm: use plain cpu_do_idle() for "wait for interrupt" For power management at91_pm_enter() routine, use the cpu_do_idle() for a rock solid "wait for interrupt" implementation. For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as we can access RAM even while in self-refresh mode. We keep plain access to CP15 for at91rm9200 as this feature is not available: instructions have to be in a single cache line. Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/pm.c | 6 ++++-- arch/arm/mach-at91/pm.h | 4 ++++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 615668986480..87a31baf1cb3 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -258,16 +258,18 @@ static int at91_pm_enter(suspend_state_t state) * NOTE: the Wait-for-Interrupt instruction needs to be * in icache so no SDRAM accesses are needed until the * wakeup IRQ occurs and self-refresh is terminated. + * For ARM 926 based chips, this requirement is weaker + * as at91sam9 can access a RAM in self-refresh mode. */ asm("b 1f; .align 5; 1:"); asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ saved_lpr = sdram_selfrefresh_enable(); - asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ + wait_for_interrupt_enable(); sdram_selfrefresh_disable(saved_lpr); break; case PM_SUSPEND_ON: - asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 8c87d0c1b8f8..2c4424bfa6c4 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -21,6 +21,7 @@ static inline u32 sdram_selfrefresh_enable(void) } #define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) +#define wait_for_interrupt_enable() asm("mcr p15, 0, r0, c7, c0, 4") #elif defined(CONFIG_ARCH_AT91CAP9) #include @@ -38,6 +39,7 @@ static inline u32 sdram_selfrefresh_enable(void) } #define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) +#define wait_for_interrupt_enable() cpu_do_idle() #elif defined(CONFIG_ARCH_AT91SAM9G45) #include @@ -74,6 +76,7 @@ static inline u32 sdram_selfrefresh_enable(void) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ } while (0) +#define wait_for_interrupt_enable() cpu_do_idle() #else #include @@ -98,5 +101,6 @@ static inline u32 sdram_selfrefresh_enable(void) } #define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) +#define wait_for_interrupt_enable() cpu_do_idle() #endif -- cgit v1.2.1