From 38656820aa31e853c7bfbe2658cc8a78e303583b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 14 Nov 2013 10:27:40 +0100
Subject: ARM: ux500: move SPI pin config to device tree

This moves the SPI pin control table out of the board file
and into the device tree. Move the specific setting for
SSP0 on the HREFprev60 into the prev60-specific DTS file.
The SPI2 configuration is not really connected to any device,
as it will conflict with GPIO218 which is used on all HREFs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi | 31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

(limited to 'arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi')

diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index 9f3e87573f86..456a25fbfaee 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -41,6 +41,23 @@
 		ste,output = <OUTPUT_LOW>;
 	};
 
+	gpio_out_hi: gpio_output_high {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	slpm_pdis: slpm_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_wkup_pdis: slpm_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_wkup_pdis_en: slpm_wkup_pdis_en {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
@@ -53,6 +70,13 @@
 		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
 	};
 
+	slpm_in_pdis: slpm_in_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-input = <SLPM_DIR_INPUT>;
@@ -86,6 +110,13 @@
 		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
 	};
 
+	slpm_out_lo_pdis: slpm_out_lo_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-- 
cgit v1.2.1