From d4da889a53d9dabe1c75384f3175dab7ff06c4ee Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 24 Sep 2014 22:48:56 +0800 Subject: ARM: sunxi: Add debug uart used by sun9i (Allwinner A80) The uarts on sun9i are still compatible with the dw_8250, but are located at different addresses. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/Kconfig.debug | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..0bc06ab9fb86 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -731,6 +731,14 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUN9I_UART0 + bool "Kernel low-level debugging messages via sun9i UART0" + depends on MACH_SUN9I + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Allwinner A80 based platforms on the UART0. + config DEBUG_SUNXI_UART0 bool "Kernel low-level debugging messages via sunXi UART0" depends on ARCH_SUNXI @@ -1106,6 +1114,7 @@ config DEBUG_UART_PHYS default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC + default 0x07000000 if DEBUG_SUN9I_UART0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1190,6 +1199,7 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ -- cgit v1.2.1 From 81b43a6e2d072126df5eb016524819f6921262f3 Mon Sep 17 00:00:00 2001 From: Marc Carino Date: Wed, 13 Aug 2014 15:50:02 -0700 Subject: ARM: brcmstb: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk on brcmstb machines. Signed-off-by: Marc Carino Acked-by: Florian Fainelli Acked-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Florian Fainelli --- arch/arm/Kconfig.debug | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..6a4ee008b092 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -139,6 +139,17 @@ choice Say Y here if you want kernel low-level debugging support on Marvell Berlin SoC based platforms. + config DEBUG_BRCMSTB_UART + bool "Use BRCMSTB UART for low-level debug" + depends on ARCH_BRCMSTB + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + If you have a Broadcom STB chip and would like early print + messages to appear over the UART, select this option. + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -1153,6 +1164,7 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART default 0xf0000be0 if ARCH_EBSA110 + default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X @@ -1204,6 +1216,7 @@ config DEBUG_UART_VIRT default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX @@ -1260,7 +1273,8 @@ config DEBUG_UART_8250_WORD ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ + DEBUG_BRCMSTB_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" -- cgit v1.2.1 From 65ec48c0c784bc8f4a0794ab2a7f3674affeb747 Mon Sep 17 00:00:00 2001 From: "Joe.C" Date: Tue, 4 Nov 2014 15:30:54 +0800 Subject: ARM: mediatek: Add earlyprintk support for mt8127 & mt8135 Enable low-level debug for Mediatek mt8127 & mt8135 SoC. Signed-off-by: Joe.C Signed-off-by: Matthias Brugger --- arch/arm/Kconfig.debug | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..7d78ed749525 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -866,6 +866,22 @@ choice Say Y here if you want kernel low-level debugging support for Mediatek mt6589 based platforms on UART0. + config DEBUG_MT8127_UART0 + bool "Mediatek mt8127 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8127 based platforms on UART0. + + config DEBUG_MT8135_UART3 + bool "Mediatek mt8135 UART3" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8135 based platforms on UART3. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -1113,7 +1129,9 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 + default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1181,7 +1199,9 @@ config DEBUG_UART_VIRT default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 + default 0xf1009000 if DEBUG_MT8135_UART3 default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 -- cgit v1.2.1 From 7a2071c58f36450fbf44a27d2e5d371c18534a25 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2014 16:49:47 +0100 Subject: ARM: shmobile: Add early debugging support using SCIF(A) Add serial port debug macros for the SCIF(A) serial ports. This includes all supported shmobile SoCs, except for EMEV2. The configuration logic (both Kconfig and #ifdef) is more complicated than one would expect, for several reasons: 1. Not all SoCs have the same serial devices, and they're not always at the same addresses. 2. There are two different types: SCIF and SCIFA. Fortunately they can easily be distinguished by physical address. 3. Not all boards use the same serial port for the console. The defaults correspond to the boards that are supported in mainline. If you want to use a different serial port, just change the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt. 4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END = 0xff000000, and must not conflict with the 2 MiB reserved region at PCI_IO_VIRT_BASE = 0xfee00000. - On SoCs not using the legacy machine_desc.map_io(), debug_ll_io_init() is called by the ARM core code. - On SoCs using the legacy machine_desc.map_io(), debug_ll_io_init() must be called explicitly. Calls are added for r8a7740, r8a7779, sh7372, and sh73a0. This was derived from the r8a7790 version by Laurent Pinchart. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Acked-by: Arnd Bergmann Tested-by: Simon Horman Signed-off-by: Simon Horman --- arch/arm/Kconfig.debug | 80 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 79 insertions(+), 1 deletion(-) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..6ac3758f85d8 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -653,6 +653,64 @@ choice Say Y here if you want kernel low-level debugging support on Rockchip RK32xx based platforms. + config DEBUG_R7S72100_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R7S72100" + depends on ARCH_R7S72100 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas RZ/A1H (R7S72100). + + config DEBUG_RCAR_GEN1_SCIF0 + bool "Kernel low-level debugging messages via SCIF0 on R8A7778" + depends on ARCH_R8A7778 + help + Say Y here if you want kernel low-level debugging support + via SCIF0 on Renesas R-Car M1A (R8A7778). + + config DEBUG_RCAR_GEN1_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R8A7779" + depends on ARCH_R8A7779 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas R-Car H1 (R8A7779). + + config DEBUG_RCAR_GEN2_SCIF0 + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 + help + Say Y here if you want kernel low-level debugging support + via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or + M2-N (R8A7793). + + config DEBUG_RCAR_GEN2_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R8A7794" + depends on ARCH_R8A7794 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas R-Car E2 (R8A7794). + + config DEBUG_RMOBILE_SCIFA0 + bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372" + depends on ARCH_R8A73A4 || ARCH_SH7372 + help + Say Y here if you want kernel low-level debugging support + via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile + AP4 (SH7372). + + config DEBUG_RMOBILE_SCIFA1 + bool "Kernel low-level debugging messages via SCIFA1 on R8A7740" + depends on ARCH_R8A7740 + help + Say Y here if you want kernel low-level debugging support + via SCIFA1 on Renesas R-Mobile A1 (R8A7740). + + config DEBUG_RMOBILE_SCIFA4 + bool "Kernel low-level debugging messages via SCIFA4 on SH73A0" + depends on ARCH_SH73A0 + help + Say Y here if you want kernel low-level debugging support + via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0). + config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS @@ -1061,6 +1119,14 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SX_UART default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 + default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 + default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 @@ -1152,6 +1218,12 @@ config DEBUG_UART_PHYS default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if ARCH_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART + default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 + default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 + default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 + default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 + default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 + default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ @@ -1164,13 +1236,19 @@ config DEBUG_UART_PHYS default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX + default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 + default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ + DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ + DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ + DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ + DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX config DEBUG_UART_VIRT -- cgit v1.2.1 From e6131fa3835483944c13d03bcff1d9103d9f53ce Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Thu, 6 Nov 2014 10:20:23 +0300 Subject: ARM: debug: move StrongARM debug include to arch/arm/include/debug StrongARM debug-macro.S is quite standalone thing, depending only on register mappings. Move it to proper place and add Kconfig entry. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig.debug | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 6a4ee008b092..6c23769318ac 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -734,6 +734,14 @@ choice their output to UART 2. The port must have been initialised by the boot-loader before use. + config DEBUG_SA1100 + depends on ARCH_SA1100 + bool "Use SA1100 UARTs for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on SA-11x0 UART ports. The kernel will check for the first + enabled UART in a sequence 3-1-2. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -1052,6 +1060,7 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string + default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO -- cgit v1.2.1 From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 14 Sep 2014 21:43:40 +0200 Subject: ARM: BCM5301X: fix early serial console This device actually has a 8250 serial with a shift of 0. Tested this on a BCM4708. Signed-off-by: Hauke Mehrtens Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig.debug | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 1c4889dbc714..a52884351e4f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -113,7 +113,7 @@ choice config DEBUG_BCM_5301X bool "Kernel low-level debugging on BCM5301X UART1" depends on ARCH_BCM_5301X - select DEBUG_UART_PL01X + select DEBUG_UART_8250 config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" @@ -1301,7 +1301,7 @@ config DEBUG_UART_VIRT config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if FOOTBRIDGE || ARCH_IOP32X + default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X default 2 config DEBUG_UART_8250_WORD -- cgit v1.2.1 From d5bd4e8df43ca930ff3892963f6b3bf7984038e3 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Mon, 24 Nov 2014 12:08:28 +0100 Subject: ARM: add lolevel debug support for asm9260 Since there is no public documentation, this patch also provide register offsets for different UART units on this SoC. Signed-off-by: Oleksij Rempel Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig.debug | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'arch/arm/Kconfig.debug') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e4917aebc31f..66ebfb88c505 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -93,6 +93,27 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL + config DEBUG_ASM9260_UART + bool "Kernel low-level debugging via asm9260 UART" + depends on MACH_ASM9260 + help + Say Y here if you want the debug print routines to direct + their output to an UART or USART port on asm9260 based + machines. + + DEBUG_UART_PHYS | DEBUG_UART_VIRT + + 0x80000000 | 0xf0000000 | UART0 + 0x80004000 | 0xf0004000 | UART1 + 0x80008000 | 0xf0008000 | UART2 + 0x8000c000 | 0xf000c000 | UART3 + 0x80010000 | 0xf0010000 | UART4 + 0x80014000 | 0xf0014000 | UART5 + 0x80018000 | 0xf0018000 | UART6 + 0x8001c000 | 0xf001c000 | UART7 + 0x80020000 | 0xf0020000 | UART8 + 0x80024000 | 0xf0024000 | UART9 + config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 @@ -1144,6 +1165,7 @@ config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/asm9260.S" if DEBUG_ASM9260_UART default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X @@ -1248,6 +1270,7 @@ config DEBUG_UART_PHYS default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if FOOTBRIDGE default 0x78000000 if DEBUG_CNS3XXX + default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART @@ -1297,13 +1320,14 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 + default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf1000300 if DEBUG_BCM_5301X @@ -1374,7 +1398,7 @@ config DEBUG_UART_VIRT depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" -- cgit v1.2.1