From 87c9c451101f84ca4ed2cd11b0e32b5b0b66cb8b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 6 Aug 2014 10:37:59 +0900 Subject: dt/bindings: rcar-audmapp: tidyup dmas explanation Current dmas explanation of SRC/DRS is confusable. This patch clarifies it. Signed-off-by: Kuninori Morimoto Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/rcar-audmapp.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt index 9f1d750d76de..61bca509d7b9 100644 --- a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt +++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt @@ -16,9 +16,9 @@ Example: * DMA client Required properties: -- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs, - where SRS/DRS values are fixed handles, specified in the SoC - manual as the value that would be written into the PDMACHCR. +- dmas: a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs. + where SRS/DRS are specified in the SoC manual. + It will be written into PDMACHCR as high 16-bit parts. - dma-names: a list of DMA channel names, one per "dmas" entry Example: -- cgit v1.2.1 From 5566401f2f10556776fd199c11d6a02a5e0b7b95 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 27 Aug 2014 10:37:49 +0200 Subject: stmmac: ptp: fix the reference clock The PTP reference clock, used for setting the addend in the Timestamp Addend Register, was erroneously hard-coded (as reported in the databook just as example). The patch removes the macro named: STMMAC_SYSCLOCK and allows to use a reference clock (clk_ptp_ref_i) that can be passed from the platform. If not passed, the main driver clock will be used as default; note that this can be fine on some platforms. Note that, prior this patch, using the old STMMAC_SYSCLOCK on some platforms, as side effect, the ptp clock can move faster/slower than the system clock. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/stmmac.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 9b03c57563a4..e45ac3f926b1 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -39,6 +39,10 @@ Optional properties: further clocks may be specified in derived bindings. - clock-names: One name for each entry in the clocks property, the first one should be "stmmaceth". +- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is + available this clock is used for programming the Timestamp Addend Register. + If not passed then the system clock will be used and this is fine on some + platforms. Examples: -- cgit v1.2.1 From 32797b3e06c0cf97dd2ae4c4415aef0b96ff5efb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 2 Sep 2014 10:17:20 +0300 Subject: video: fix composite video connector compatible string The quite-recently-added analog-tv-connector bindings say that the compatible string for composite video connector is "composite-connector". That string is also used in the omap3-n900.dts file. However, the connector driver uses "composite-video-connector", so this has never worked. While changing the driver's compatible string to "composite-connector" would be safer, as published DT bindings should not be changed, I'd rather fix the bindings in this case for two reasons: * composite-connector is a bit too generic name, as it doesn't even hint at video. * it's clear that this has never worked, which means no one has used those bindings, which should make it safe to change this. Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart --- Documentation/devicetree/bindings/video/analog-tv-connector.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/Documentation/devicetree/bindings/video/analog-tv-connector.txt index 0218fcdc1299..0c0970c210ab 100644 --- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt +++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt @@ -2,7 +2,7 @@ Analog TV Connector =================== Required properties: -- compatible: "composite-connector" or "svideo-connector" +- compatible: "composite-video-connector" or "svideo-connector" Optional properties: - label: a symbolic name for the connector @@ -14,7 +14,7 @@ Example ------- tv: connector { - compatible = "composite-connector"; + compatible = "composite-video-connector"; label = "tv"; port { -- cgit v1.2.1 From 36687e30565100e45f29f8db52dd223dca1d6d99 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 26 Aug 2014 10:55:18 +0800 Subject: doc: dt: mxs-phy: add compatible string for imx6sx-usbphy Add compatible string for imx6sx-usbphy. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/mxs-phy.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index cef181a9d8bd..96681c93b86d 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -5,6 +5,7 @@ Required properties: * "fsl,imx23-usbphy" for imx23 and imx28 * "fsl,imx6q-usbphy" for imx6dq and imx6dl * "fsl,imx6sl-usbphy" for imx6sl + * "fsl,imx6sx-usbphy" for imx6sx "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt -- cgit v1.2.1