From aa76fcf473f6bfa839f37f77b6fdb71f0fb88d8f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 21 Feb 2014 17:36:21 +0200 Subject: CLK: TI: DPLL: add support for omap2 core dpll OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo --- Documentation/devicetree/bindings/clock/ti/dpll.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree/bindings/clock/ti/dpll.txt') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 30bfdb7c9f18..50a1a427608f 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -30,6 +30,7 @@ Required properties: "ti,am3-dpll-clock", "ti,am3-dpll-core-clock", "ti,am3-dpll-x2-clock", + "ti,omap2-dpll-core-clock", - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks, first entry lists reference clock @@ -41,6 +42,7 @@ Required properties: "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) ti,am3-* dpll types do not have autoidle register + ti,omap2-* dpll type does not support idlest / autoidle registers Optional properties: - DPLL mode setting - defining any one or more of the following overrides @@ -73,3 +75,10 @@ Examples: clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x90>, <0x5c>, <0x68>; }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; -- cgit v1.2.3 From b4be018921879ba7452379af8fb7320833a12bd4 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 05:45:59 -0500 Subject: CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). So provide support to setup required data to handle Duty cycle by the setting up the minimum frequency for DPLL. 1.4GHz is common for all these devices and is based on Technical Reference Manual information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and equivalent information from DRA75x, DRA72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Nishanth Menon [t-kristo@ti.com: updated for latest dpll init API call] Signed-off-by: Tero Kristo --- Documentation/devicetree/bindings/clock/ti/dpll.txt | 1 + drivers/clk/ti/dpll.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'Documentation/devicetree/bindings/clock/ti/dpll.txt') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 50a1a427608f..df57009ff8e7 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -24,6 +24,7 @@ Required properties: "ti,omap4-dpll-core-clock", "ti,omap4-dpll-m4xen-clock", "ti,omap4-dpll-j-type-clock", + "ti,omap5-mpu-dpll-clock", "ti,am3-dpll-no-gate-clock", "ti,am3-dpll-j-type-clock", "ti,am3-dpll-no-gate-j-type-clock", diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 34e233990212..abd956d5f838 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -433,6 +433,27 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); +static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .dcc_mask = BIT(22), + .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", + of_ti_omap5_mpu_dpll_setup); + static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) { const struct dpll_data dd = { -- cgit v1.2.3