From ffc203bc19eda0e58fea1bdf8172f313f26f8722 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sat, 24 Dec 2011 00:21:18 +1000 Subject: m68knommu: make 520x UART platform addressing consistent If we make all UART addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 520x UART addressing so that: . UARTs are numbered from 0 up . use a common name for IRQs used Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/m520xsim.h | 10 +++++++--- arch/m68k/platform/520x/config.c | 12 ++++++------ 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index eda62de7e607..41ed4dc8d736 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -50,6 +50,10 @@ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + /* * SDRAM configuration registers. */ @@ -144,9 +148,9 @@ /* * UART module. */ -#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */ +#define MCFUART_BASE0 0xFC060000 /* Base address of UART0 */ +#define MCFUART_BASE1 0xFC064000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xFC068000 /* Base address of UART2 */ /* * FEC module. diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c index 61c25151d221..27c7d056dc1f 100644 --- a/arch/m68k/platform/520x/config.c +++ b/arch/m68k/platform/520x/config.c @@ -27,16 +27,16 @@ static struct mcf_platform_uart m520x_uart_platform[] = { { - .mapbase = MCFUART_BASE1, - .irq = MCFINT_VECBASE + MCFINT_UART0, + .mapbase = MCFUART_BASE0, + .irq = MCF_IRQ_UART0, }, { - .mapbase = MCFUART_BASE2, - .irq = MCFINT_VECBASE + MCFINT_UART1, + .mapbase = MCFUART_BASE1, + .irq = MCF_IRQ_UART1, }, { - .mapbase = MCFUART_BASE3, - .irq = MCFINT_VECBASE + MCFINT_UART2, + .mapbase = MCFUART_BASE2, + .irq = MCF_IRQ_UART2, }, { }, }; -- cgit v1.2.1