summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/tlv320aic3x.c
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: tlv320aic3x: Let the codec hit SND_SOC_BIAS_OFF when idleJarkko Nikula2010-09-201-18/+2
| | | | | | | | | | | Now codec hits the SND_SOC_BIAS_OFF also when it is idle. This is also the default state after probing and codec is left unconfigured and unpowered by default. Initialization will happen when the bias state changes and aic3x_set_power does power-up and cache sync. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Use regulator notifiers for optimizing the cache syncJarkko Nikula2010-09-201-2/+61
| | | | | | | | | | | | | | There is no need to reset the codec and perform cache sync if none of the supply regulators were not disabled. Patch registers a notifier callback for each supply and callback then sets a flag to indicate when cache sync is required. HW writes are also needless when codec bias is off so cache_only flag is set independently of actual supply regulators state. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Add runtime regulator control to aic3x_set_bias_levelJarkko Nikula2010-09-201-18/+65
| | | | | | | | | | | | | | | | | | | Now all the regulators are disabled when entering into SND_SOC_BIAS_OFF and enabled when coming back to SND_SOC_BIAS_STANDBY state. Currently this runtime control happens only with suspend/resume as this patch does not change the default idle behavior. This patch manages all the regulators and reset since it seems that register sync is needed even if only analog supplies AVDD and DRVDD are disabled. This was noted when the system was running with idle behavior changed and IOVDD and DVDD were on. It is not known are all the registers needed to sync or only some subset of them. Therefore patch plays safe and does always full shutdown/power-up. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Move regulator management from i2c to soc domainJarkko Nikula2010-09-201-50/+50
| | | | | | | | | | It will be easier to keep regulator enable/disable calls in sync when dynamic regulator management is added if regulator management is moved from aic3x_i2c_probe/_remove to aic3x_probe/_remove. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge remote branch 'asoc/for-2.6.37' into for-2.6.37Liam Girdwood2010-09-201-148/+115
|\
| * ASoC: tlv320aic3x: Complete the soc-cache conversionJarkko Nikula2010-09-151-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Complete the phasing out of aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and aic3x_write calls. This patch uses in aic3x_read the codec->hw_read that points to a function implemented by soc-cache. Only use for aic3x_read is if wanting to read volatile bits from those registers that has both read-only and read/write bits. All other cases should use snd_soc_read. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Switch to soc-cache helpersJarkko Nikula2010-09-151-37/+9
| | | | | | | | | | | | | | | | | | | | | | | | Continue phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and aic3x_write calls. This patch takes the soc-cache in use and removes aic3x_read_reg_cache and aic3x_write. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Use snd_soc_read and snd_soc_writeJarkko Nikula2010-09-151-96/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | Start phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and aic3x_write calls in order to switch to soc-cache helpers. This patch replaces aic3x_read_reg_cache and aic3x_write with snd_soc_read and snd_soc_write. This is basically null-op since .read and .write in soc_codec_dev_aic3x points to aic3x_read_reg_cache and aic3x_write. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: tlv320aic3x: Add virtual output pin DetectionJarkko Nikula2010-09-201-0/+8
|/ | | | | | | | | | | | | | | | | Purpose of this virtual Detection pin is to keep codec bias on whenever the GPIO or jack detection features are needed. Jack detection needs a mic bias so machine drivers can construct a following route for instance for keeping the path and codec bias on: "Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec. For the GPIO the machine driver can force the pin on with snd_soc_dapm_force_enable_pin. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Optimize PLL programming in aic3x_set_bias_levelJarkko Nikula2010-09-111-4/+6
| | | | | | | | | There is only need to enable/disable once the PLL when the bias is going between on, prepare, standby and off states. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Fix null pointer dereference when pdata is not setJarkko Nikula2010-09-061-6/+8
| | | | | | | | | | | | Null pointer dereference will occur from *setup = pdata->setup if pdata is not set. Fix this by moving assignments from pdata inside non-null case. Thanks to Jiri Slaby <jirislaby@gmail.com> for noticing. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Sanitize output controlsJarkko Nikula2010-08-281-38/+76
| | | | | | | | | | | | | | | | | | | | | | | Currently output controls are not uniform. Some routes are adjusted by mono controls that don't match to associated mixer switch, many routes are not covered at all and stereo controls have following variants: - L-to-L & R-to-R - R-to-L & R-to-R - L-to-L & R-to-L This patch attempts to fix these issues. First, for the convenience, only direct L-to-L, R-to-R and [L | R]-to-Mono routes are controlled by the stereo controls. This logic is also used with the output pin mute controls so all of them except mono output are controlled by stereo switches. Then rest of the swapped L-to-R and R-to-L routes are controlled by the mono controls that map to mixer switches with a same name. Mixers can then associate these switches and volumes together. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Reimplement output mixersJarkko Nikula2010-08-281-207/+187
| | | | | | | | | | | | | | | | | | | | It turned out that the output mixers and their routes were misdefined: They are not mixing output pins to internal signals but opposite. This has worked for direct left-to-left and right-to-right routes since for those there are complete routes. For swapped left-to-right and right-to-left routes this is not working since there are no routes defined between them. Another consequence is that those misdefined mixers are incorrectly routed to several output pins leading unnecessary pin powerings even if there is no route active to them. Fix these by reimplementing the output mixers and routes as they are in hardware. For completeness add also a few missing links between internal signals and outputs. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: tlv320aic3x: Fix remaining output pin switch namesJarkko Nikula2010-08-281-3/+3
| | | | | | | | | | Bit 3 in output pin_CTRL register mutes the whole output pin not just the route from DAC so remove misleading DAC from control name. Currently only "Line[L | R] Playback Switch" were correct. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge remote branch 'broonie-asoc/for-2.6.37' into for-2.6.37Liam Girdwood2010-08-231-10/+70
|\
| * ASoC: Add support for tlv320aic3007 to tlv320aic3x codec.Randolph Chung2010-08-201-10/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the tlv320aic3007 codec to the tlv320aic3x driver. The tlv320aic3007 is similar to the aic31, but has an additional class-D speaker amp. The speaker amp control register overlaps with the mono output register of other codecs in this family, so we add logic to identify the actual codec being registered to set things up accordingly. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Configure symmetric rates for tlv320aic3xRandolph Chung2010-08-191-0/+1
| | | | | | | | | | | | | | | | | | The tlv320aic3x codec driver only supports symmetric rates for capture/ playback. Set the flag in the DAI accordingly. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Fix tlv320aic3x GPIO initializationJarkko Nikula2010-08-231-2/+2
|/ | | | | | | | | | aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood2010-08-121-152/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge branch 'topic/asoc' into for-linusTakashi Iwai2010-05-201-48/+70
|\ | | | | | | | | Conflicts: sound/soc/codecs/ad1938.c
| * ASoC: Remove unneeded suspend bias managment from CODEC driversMark Brown2010-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | The core will ensure that the device is in either STANDBY or OFF bias before suspending, restoring the bias in the driver is unneeded. Some drivers doing slightly more roundabout things have been left alone for now. Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: tlv320aic3x: Add platform data and reset gpio handlingJarkko Nikula2010-05-061-0/+25
| | | | | | | | | | | | | | | | | | | | Handle the reset GPIO within the codec driver in order to follow the startup protocol for the tlv320aic3x codecs. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Add basic regulator supportJarkko Nikula2010-04-271-0/+37
| | | | | | | | | | | | | | | | | | This patch adds the TLV320AIC3x supplies and enables all of them for the entire lifetime of the device. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Change bias management semanticsJarkko Nikula2010-04-271-7/+3
| | | | | | | | | | | | | | | | | | | | Move PLL enable from BIAS_ON state to BIAS_PREPARE to be pair with BIAS_STANDBY where PLL is disabled. Remove also old comments about power control. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Remove needless power off from aic3x_set_bias_levelJarkko Nikula2010-04-271-34/+0
| | | | | | | | | | | | | | | | | | | | | | These ADC, DAC and output pin power off commands are needless in aic3x_set_bias_level since they are not enabled in aic3x_init and they are defined in aic3x_dapm_widgets so the ASoC DAPM will take care of them anyway. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Remove unused version stringJarkko Nikula2010-04-271-2/+0
| | | | | | | | | | | | Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Add indirection for CODEC private dataMark Brown2010-04-171-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* ASoC: Fix variable shadowing warning in TLV320AIC3xMark Brown2010-01-041-4/+4
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: PLL computation in TLV320AIC3x SoC driverPeter Meerwald2009-12-161-26/+49
| | | | | | | | | | fix precision of PLL computation for TLV320AIC3x SoC driver, test results are at http://pmeerw.net/clk Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Vladimir Barinov <vova.barinov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Remove redundant snd_soc_dapm_new_widgets() callsMark Brown2009-11-121-1/+0
| | | | | | | The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Factor out snd_soc_init_card()Mark Brown2009-11-031-10/+0
| | | | | | | | | snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Make platform data optional for TLV320AIC3xMark Brown2009-08-261-7/+6
| | | | | | | | Now that we don't need the I2C address for the device the platform data is redundant so allow it to be omitted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Chaithrika U S <chaithrika@ti.com>
* ASoC: tlv320aic3x: Change to use device modelBen Dooks2009-08-211-105/+116
| | | | | | | | | | | | The tlv320aic3x driver managed its own i2c device, instead of an extant one created by the board support code. Change the code to make it so that the driver binds to an extant (in this case i2c) device. Add explict tlv320aic33 as well as tlv320aic3x to the supported device table and remove the old driver bindings from the users of this code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'reg-cache' into for-2.6.32Mark Brown2009-08-071-9/+2
|\
| * ASoC: Remove use of hw_read from TLV320AIC3x driverMark Brown2009-07-051-9/+2
| | | | | | | | | | | | | | | | | | The TLV320AIC3x driver is currently the only user of the CODEC hw_read operation and is jumping through some hoops in order to do so. In order to support future refactoring to make the hw_read operation more usable unwrap the usage in this driver to avoid its use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: tlv320aic3x: Enable PLL when not bypassedChaithrika U S2009-07-231-1/+10
|/ | | | | | | | | | | | | | | | | PLL was not being enabled when it was not bypassed. This patch enables the PLL when it is used. Additionally, it disables the PLL when it is bypassed. Without this patch, the audio on TI DM646x EVM and DM355 EVM does not work properly. The bit clocks and the frame sync signals from the codec are not correct and hence the playback/record are faster than usual for most sample rates. The reason for this was that the PLL was not enabled when it was not bypassed. Tested on DM6467 EVM, playback tested on DM355 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: make ops a pointer in 'struct snd_soc_dai'Eric Miao2009-03-041-6/+8
| | | | | | | | | | | | | | | | Considering the fact that most cpu_dai or codec_dai are using a same 'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better made a pointer instead, to make sharing easier and code a bit cleaner. The patch below is rather preliminary since the asoc tree is being actively developed, and this touches almost every piece of code, (and possibly many others in development need to be changed as well). Building of all codecs are OK, yet to every SoC, I didn't test that. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TLV320AIC3X: Add TLV information for volume controlsJarkko Nikula2009-02-091-41/+73
| | | | | | | TLV320AIC3X volume controls are logarithmic. Export their dB ranges. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TLV320AIC3X: Fix volume rangesJarkko Nikula2009-02-091-19/+19
| | | | | | | | | | | | | | This is a minor fix but helps to define dB ranges for volume controls. Only DAC digital volume has full register value range from 0 to 127 but ADC PGA gain and output stage volume controls don't. For ADC PGA, maximum value is 119 and then it saturates to the same gain value of 59.5 dB. For output stages, value 117 corresponds to -78.3 dB and is muted for values 118 and above. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-2.6.29' into for-2.6.30Mark Brown2009-02-061-4/+7
|\
| * ASoC: TLV320AIC3X: Fix kcontrol's private value use in put callbackEero Nurkkala2009-02-061-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Function snd_soc_dapm_put_volsw_aic3x misuses the kcontrol's private value by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it as a pointer into struct soc_mixer_control after the commit 4eaa9819dc08d7bfd1065ce530e31b18a119dcaf. This was causing arbitrary register writes when touching the controls defined with SOC_DAPM_SINGLE_AIC3X. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Push the codec runtime storage into the card structureMark Brown2009-01-271-7/+7
| | | | | | | | | | | | | | This is a further stage on the road to refactoring away the ASoC platform device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: cleanup duplicated code.Ian Molton2009-01-091-17/+2
|/ | | | | | | | | | | | | | | Many codec drivers were implementing cookie-cutter copies of the function that adds kcontrols to the codec. This patch moves this code to a common function snd_soc_add_controls() in soc-core.c and updates all drivers using copies of this function to use the new common version. [Edited to raise priority of error log message and document parameters. -- broonie] Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC: tlv320aic3x add dsp_aTroy Kisky2008-12-201-0/+4
| | | | | | | Add SND_SOC_DAIFMT_DSP_A mode option. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC - Fix wrong section typesTakashi Iwai2008-12-101-1/+1
| | | | | | The module init entries should be __init instead of __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: Register non-AC97 codec DAIsMark Brown2008-12-091-0/+12
| | | | | | | | | | | | | | Currently this is done at module probe time since ASoC ties in codec device probe to the instantiation of the entire ASoC device. Subsequent patches will refactor the codec drivers to handle probing separately. Note that the core does not yet use this information. AC97 is special since the codec is controlled over the AC97 link but we want to give the machine driver a chance to set up the system before trying to instantiate since it may need to do configuration before the AC97 link will operate Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: tlv320aic3x: control additions and cleanupsDaniel Mack2008-12-051-5/+13
| | | | | | | | | | | | | - split "Line Playback Switch" into "LineL Playback Switch" and "LineR Playback Switch" - split "Line PGA Bypass Playback Volume" into "LineL Left PGA Bypass Playback Volume" and "LineR Right PGA Bypass Playback Volume" - split "Line Line2 Bypass Playback Volume" into "LineL Line2 Bypass Playback Volume" and "LineR Line2 Bypass Playback Volume" - Added "HP Right PGA Bypass Playback Volume" Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: tlv320aic3x: headset/button press supportDaniel Mack2008-12-031-2/+29
| | | | | | | | | | | - Add aic3x_set_headset_detection() function to define the headset detection mode for tlv32aic3x chips - added aic3x_button_pressed() - Read from the real-time registers in aic3x_headset_detected() to query headset presence without an occured interrupt Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Rename snd_soc_register_card() to snd_soc_init_card()Mark Brown2008-12-011-1/+1
| | | | | | | | | | Currently ASoC card initialisation is completed by a function called snd_soc_register_card(). As part of the work to allow independant registration of cards, codecs and machines in ASoC v2 a new function of the same name has been added so rename the existing function to facilitate the merge of v2. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
OpenPOWER on IntegriCloud