summaryrefslogtreecommitdiffstats
path: root/sound/pci/oxygen
Commit message (Collapse)AuthorAgeFilesLines
* [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785Clemens Ladisch2008-01-312-3/+3
| | | | | | | | | While the AK4396 and WM8785 datasheets say that the SPI clock cycle length must be at least 200 ns, 320 ns seems not to work reliably with the controller, so we better use 160 ns. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] virtuoso: monitor external power on D2XClemens Ladisch2008-01-313-1/+52
| | | | | | | | On the Xonar D2X, monitor the GPIO pin that indicates whether external power is present. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add front panel captureClemens Ladisch2008-01-311-18/+34
| | | | | | | | When a second AC97 codec is present, add a PCM device for capturing from the front panel. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add front panel controlsClemens Ladisch2008-01-314-26/+100
| | | | | | | Add mixer controls for the front panel AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: use AC97 interruptClemens Ladisch2008-01-313-11/+28
| | | | | | | | After an AC97 register read or write, use the AC97 interrupt instead of polling to wait for the access to be completed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make line-in exclusive only on XonarClemens Ladisch2008-01-314-31/+54
| | | | | | | | Move the line input switching code to the Virtuoso driver because only the Xonar cards bypass the analog mixer for line input. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix AK4396 double rate upper limitClemens Ladisch2008-01-312-2/+2
| | | | | | | | Fix the upper sample rate limit for the double rate mode of the AK4396 to the value from the datasheet. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] add TempoTec HiFier driverClemens Ladisch2008-01-315-42/+256
| | | | | | | Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: more initializationClemens Ladisch2008-01-312-34/+62
| | | | | | | Initialize more registers of the controller and the second AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make the number of analog output configurableClemens Ladisch2008-01-315-8/+24
| | | | | | | | Add a field to struct oxygen_model to allow model drivers for cards with less than eight output channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: remove MIDI for generic cardsClemens Ladisch2008-01-311-3/+4
| | | | | | | | None of the reference design models have MIDI, only the X-Meridian allows to connect a MIDI adapter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix SPDIF input ratesClemens Ladisch2008-01-311-0/+5
| | | | | | | | Fix up SPDIF input sample rates again: 32 kHz and 64 kHz are not supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add SPDIF loopback controlClemens Ladisch2008-01-311-0/+38
| | | | | | | Add a mixer control for the SPDIF loopback function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: optimize snd_pcm_hardware structuresClemens Ladisch2008-01-311-150/+79
| | | | | | | | Add one more indirection to the lookup of the snd_pcm_hardware structures so that we can save the space of the duplicate ones. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add 192 kHz SPDIF input supportClemens Ladisch2008-01-312-24/+63
| | | | | | | | | Change the oxygen_spdif_input_bits_changed() function so that clock changes on the SPDIF input are correctly detected. This means that sample rates greater than 96 kHz are now supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix DAC source register fieldsClemens Ladisch2008-01-311-2/+2
| | | | | | | | Fix some wrong values for the definitions of the source masks for DACS 1 and 3. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix control filterClemens Ladisch2008-01-311-1/+1
| | | | | | | | Actually use the template that was maybe changed by the control filter instead of the original one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: move model-specific data out of common headerClemens Ladisch2008-01-313-7/+20
| | | | | | | | | Instead of having model-specific fields in the common struct oxygen, put them into a private structure that is allocated together with the card structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: reduce SPI clock frequency for AK4396/WM8785Clemens Ladisch2008-01-312-3/+3
| | | | | | | | According to the datasheets, the SPI clock cycle must be at least 200 ns for the AK4396 and the WM8785, so we cannot use the default 160 ns. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: allow more sample rates with WM8785Clemens Ladisch2008-01-311-17/+4
| | | | | | | | Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards that have a WM8785 ADC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add more symbolsClemens Ladisch2008-01-316-70/+281
| | | | | | | Add symbol definitions for the various codecs and GPIO pins. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: remove MIDI autodetectionClemens Ladisch2008-01-314-5/+7
| | | | | | | | | The MIDI bit in the MISC register is set by default and cannot be used to detect the presence of a MIDI port. Instead, add a parameter to the oxygen_pci_probe() function so that model drivers can specify this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix pause handlingClemens Ladisch2008-01-311-10/+17
| | | | | | | Use the DMA_PAUSE register for pausing instead of stopping DMA. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: remove magic numbersClemens Ladisch2008-01-314-25/+89
| | | | | | | Replace some magic numbers with register symbols. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix playback routingClemens Ladisch2008-01-312-3/+3
| | | | | | | | The default playback routing must be 0xe4, not 0xe1; the front and surround DACs were exchanged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add register definitionsClemens Ladisch2008-01-316-95/+296
| | | | | | | Add more symbols for registers and register fields. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make the I2S format configurableClemens Ladisch2008-01-315-30/+44
| | | | | | | | Add proper register bit symbols for the I2S format field, and allow card models to configure the I2S format to be used for the DACs and ADCs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make PCM limits configurableClemens Ladisch2008-01-313-2/+24
| | | | | | | | Add a callback to the model structure to allow modification of the hardware PCM limits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add control filter to model structClemens Ladisch2008-01-314-21/+46
| | | | | | | | Allow the models to modify mixer controls before they are added to the card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make all DMA channels configurableClemens Ladisch2008-01-314-26/+64
| | | | | | | | Allow the card models to specify whether each of the hardware DMA channels is used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make SPI configuration configurableClemens Ladisch2008-01-314-1/+5
| | | | | | | | Add a field to the model structure so that it is possible to have a card where the SPI outputs 4 and 5 are used for an EEPROM. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make AC97 codec optionalClemens Ladisch2008-01-314-36/+76
| | | | | | | | Only initialize and create mixer controls for the first AC97 codec when one has actually been detected. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: rename PCM to MasterClemens Ladisch2008-01-311-3/+3
| | | | | | | Rename the 'PCM Playback Volume'/'Switch' mixer controls to 'Master'. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: make line-in switch exclusiveClemens Ladisch2008-01-312-1/+33
| | | | | | | | The line input cannot be mixed with the other inputs, so we have to mute the other input switches when it is selected. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: use an array of snd_kcontrol pointersClemens Ladisch2008-01-314-20/+28
| | | | | | | | Use an array for the pointers to known controls so that it is easier to add more. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix channel routingClemens Ladisch2008-01-314-16/+18
| | | | | | | | Do not exchange the surround and back jacks except when in 7.1 mode where the surround jack is not rear but side. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-316-6/+0
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: use uintptr_t in pointer castsClemens Ladisch2008-01-311-7/+13
| | | | | | | | | | When we store the DMA channel number in the substream's private_data pointer, use uintptr_t as an intermediate step when casting from/to unsigned int to prevent the compiler from whining when the pointer size is different. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] add Asus Xonar driverClemens Ladisch2008-01-312-0/+271
| | | | | | | | Add the snd-virtuoso driver for the Asus Virtuoso 200 chip used on the PCI and PCI-E models of the Xonar sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] add CMI8788 driverClemens Ladisch2008-01-318-0/+2636
Add the snd-oxygen driver for the C-Media CMI8788 (Oxygen) chip, used on the Asound A-8788, AuzenTech X-Meridian, Bgears b-Enspirer, Club3D Theatron DTS, HT-Omega Claro, Razer Barracuda AC-1, Sondigo Inferno, and TempoTec HIFIER sound cards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
OpenPOWER on IntegriCloud