summaryrefslogtreecommitdiffstats
path: root/scripts/mod
Commit message (Collapse)AuthorAgeFilesLines
* [S390] zcrypt adjunct processor bus.Martin Schwidefsky2006-09-201-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a bus for the adjunct processor interface. Up to 64 devices can be connect to the ap bus interface, each device with 16 domains. That makes 1024 message queues. The interface is asynchronous, the answer to a message sent to a queue needs to be received at some later point in time. Unfortunately the interface does not provide interrupts when a message reply is pending. So the ap bus needs to implement some fancy polling, each active queue is polled once per 1/HZ second or continuously if an idle cpus exsists and the poll thread is activ (see poll_thread parameter). The ap bus uses the sysfs path /sys/bus/ap and has two bus attributes, ap_domain and config_time. The ap_domain selects one of the 16 domains to be used for this system. This limits the maximum number of ap devices to 64. The config_time attribute contains the number of seconds between two ap bus scans to find new devices. The ap bus uses the modalias entries of the form "ap:tN" to autoload the ap driver for hardware type N. Currently known types are: 3 - PCICC, 4 - PCICA, 5 - PCIXCC, 6 - CEX2A and 7 - CEX2C. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patchHans de Goede2006-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a small but annoying bug in scripts/mod/file2alias.c which causes it to generate invalid aliases for input devices on 64 bit archs. This causes joydev.ko to not be automaticly loaded when inserting a joystick, resulting in a non working joystick (for the average user). In scripts/mod/file2alias.c is the following code for generating the input aliases: static void do_input(char *alias, kernel_ulong_t *arr, unsigned int min, unsigned int max) { unsigned int i; for (i = min; i < max; i++) if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) sprintf(alias + strlen(alias), "%X,*", i); } On 32 bits systems, this correctly generates "0,*" for the first alias, "8,*" for the second etc. However on 64 bits it generates: "0,*20,*" resp "8,*28,*" Notice how it adds 20 + first entry (hex) ! to the list of hex codes, which is 32 more then the first entry, thus is because the bit test above wraps at 32 bits instead of 64. scripts/mod/file2alias.c, line 379 reads: if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) That should be: if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG))) Notice the added 'L' after the 1, otherwise that is an 32 bit int instead of a 64 bit long, and when that int gets shifted >= 32 times, appearantly the number by which to shift is wrapped at 5 bits ( % 32) causing it to test a bit 32 bits too low. The patch below makes the nescesarry 1 char change :) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* kbuild: improve error from file2aliasSam Ravnborg2006-08-011-19/+43
| | | | | | | | | | | | | | The original errormessage was just plain unreadable. Sample error message after this update (not for real - I provoked it): FATAL: drivers/net/s2io: sizeof(struct pci_device_id)=33 is not a modulo of the size of section __mod_pci_device_table=160. Fix definition of struct pci_device_id in mod_devicetable.h Before a warning was generated - this is now a fatal error. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: warn when a moduled uses a symbol marked UNUSEDSam Ravnborg2006-07-012-23/+64
| | | | | | | | We now have infrastructure in place to mark an EXPORTed symbol as unused. So the natural next step is to warn during buildtime when a module uses a symbol marked UNUSED. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: fix segv in modpostSam Ravnborg2006-07-011-3/+6
| | | | | | Parsing an old Modules.symvers file casued modpost to SEGV. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: replace abort() with exit(1)Sam Ravnborg2006-06-242-4/+4
| | | | | | | We have had no use of the coredump file for a long time. So just exit(1) and avoid coredumping. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: kill some false positives from modpostAl Viro2006-06-241-0/+6
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: fix module.symvers parsing in modpostLaurent Riffard2006-06-161-1/+1
| | | | | | | read_dump didn't split lines between module name and export type. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: modpost build fixAndrew Morton2006-06-101-1/+2
| | | | | | | | | | | scripts/mod/modpost.c: In function `check_license': scripts/mod/modpost.c:1094: parse error before `const' scripts/mod/modpost.c:1095: `basename' undeclared (first use in this function) scripts/mod/modpost.c:1095: (Each undeclared identifier is reported only once scripts/mod/modpost.c:1095: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: check license compatibility when building modulesSam Ravnborg2006-06-092-2/+70
| | | | | | | | | | | | | | | Modules that uses GPL symbols can no longer be build with kbuild, the build will fail during the modpost step. When a GPL-incompatible module uses a EXPORT_SYMBOL_GPL_FUTURE symbol then warn during modpost so author are actually notified. The actual license compatibility check is shared with the kernel to make sure it is in sync. Patch originally from: Andreas Gruenbacher <agruen@suse.de> and Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: export-type enhancement to modpost.cRam Pai2006-06-092-16/+80
| | | | | | | | | | | | | | | | | | This patch provides the ability to identify the export-type of each exported symbols in Module.symvers. NOTE: It updates the Module.symvers file with the additional information as shown below. 0x0f8b92af platform_device_add_resources vmlinux EXPORT_SYMBOL_GPL 0xcf7efb2a ethtool_op_set_tx_csum vmlinux EXPORT_SYMBOL Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: fix false section mismatch with ARCH=um buildSam Ravnborg2006-06-081-0/+2
| | | | | | | | Ignoring references to .init.text, .exit.text from the .plt section brought the false positives down to two warnings for a defconfig build of ARCH=um on x86_64. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* kbuild: ignore smp_locks section warnings from init/exit codeRandy Dunlap2006-06-081-0/+2
| | | | | | | | Add ".smp_locks" section to whitelist as being safe from init and exit sections. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [PATCH] kbuild: fix modpost segfault for 64bit mipsel kernelAtsushi Nemoto2006-05-212-6/+46
| | | | | | | | | | | | | | Here is an updated r_info layout fix. Please apply "check SHT_REL sections" patch before this. 64bit mips has different r_info layout. This patch fixes modpost segfault for 64bit little endian mips kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kbuild: check SHT_REL sectionsAtsushi Nemoto2006-05-212-19/+48
| | | | | | | | | | | | | | | | | I found that modpost can not detect section mismatch on mips and i386. On mips64, the modpost (with r_info layout fix) can detect it. The current modpst only checks SHT_RELA section but I suppose SHT_REL section should be checked also. This patch does not contain r_info layout fix. I'll post an updated r_info layout fix on next mail. Check SHT_REL sections as like as SHT_RELA sections to detect section mismatch. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Revert "kbuild: fix modpost segfault for 64bit mipsel kernel"Linus Torvalds2006-05-082-28/+2
| | | | | | | | | | | This reverts commit c8d8b837ebe4b4f11e1b0c4a2bdc358c697692ed, which caused problems for the x86 build. Quoth Sam: "It was discussed on mips list but apparently the fix was bogus. I will not have time to look into it so mips can carry this local fix until we get a proper fix in mainline." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds2006-05-082-5/+31
|\ | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: Do not overwrite makefile as anohter user kbuild: drivers/video/logo/ - fix ident glitch kbuild: fix gen_initramfs_list.sh kbuild modpost - relax driver data name kbuild: removing .tmp_versions considered harmful kbuild: fix modpost segfault for 64bit mipsel kernel
| * kbuild modpost - relax driver data nameRandy Dunlap2006-04-301-3/+3
| | | | | | | | | | | | | | | | Relax driver data name from *_driver to *driver. This fixes the 26 section mismatch warnings in drivers/ide/pci. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: fix modpost segfault for 64bit mipsel kernelAtsushi Nemoto2006-04-302-2/+28
| | | | | | | | | | | | | | | | 64bit mips has different r_info layout. This patch fixes modpost segfault for 64bit little endian mips kernel. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov2006-04-291-5/+10
|\ \ | |/
| * kbuild: fix false section mismatch warningsSam Ravnborg2006-04-151-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Darren Jenkins <darrenrjenkins@gmail.com> pointed out a number of false positives where we referenced variables from a _driver variable. Fix it by check for that pattern and ignore it. Randy.Dunlap <rdunlap@xenotime.net> pointed out a similar set of warnings for a number of scsi drivers. In scsi world they misname their variables *_template or *_sht so add these to list of variables that may have references to .init.text with no warning. Randy.Dunlap <rdunlap@xenotime.net> also pointed out a scsi driver with many references to .exit.text from .rodata. This is compiler generated references and we already ignore these for .init.text, so ignore them for .exit.text also. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: fix NULL dereference in scripts/mod/modpost.cEric Sesterhenn2006-04-111-1/+1
| | | | | | | | | | | | | | | | before is NULL in this case, concluding from the surrounding code it seems that after is the right one to use. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | Input: move input_device_id to mod_devicetable.hDmitry Torokhov2006-04-261-19/+17
|/ | | | Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds2006-03-255-169/+607
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits) kbuild: remove obsoleted scripts/reference_* files kbuild: fix make help & make *pkg kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h Kconfig: remove the CONFIG_CC_ALIGN_* options kbuild: add -fverbose-asm to i386 Makefile kbuild: clean-up genksyms kbuild: Lindent genksyms.c kbuild: fix genksyms build error kbuild: in makefile.txt note that Makefile is preferred name for kbuild files kbuild: replace PHONY with FORCE kbuild: Fix bug in crc symbol generating of kernel and modules kbuild: change kbuild to not rely on incorrect GNU make behavior kbuild: when warning symbols exported twice now tell user this is the problem kbuild: fix make dir/file.xx when asm symlink is missing kbuild: in the section mismatch check try harder to find symbols kbuild: fix section mismatch check for unwind on IA64 kbuild: kill false positives from section mismatch warnings for powerpc kbuild: kill trailing whitespace in modpost & friends kbuild: small update of allnoconfig description kbuild: make namespace.pl CROSS_COMPILE happy ... Trivial conflict in arch/ppc/boot/Makefile manually fixed up
| * kbuild: Fix bug in crc symbol generating of kernel and modulesLuke Yang2006-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The scripts/genksyms/genksyms.c uses hardcoded "__crc_" prefix for crc symbols in kernel and modules. The prefix should be replaced by "MODULE_SYMBOL_PREFIX##__crc_" otherwise there will be warnings when MODULE_SYMBOL_PREFIX is not NULL. I am sorry my last patch for this issue is actually wrong. I revert it in this patch. Signed-off-by: Luke Yang <luke.adi@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: when warning symbols exported twice now tell user this is the problemSam Ravnborg2006-03-051-1/+1
| | | | | | | | | | | | | | | | | | Warning now looks like this: WARNING: vmlinux: 'strcpy' exported twice. Previous export was in vmlinux Which gives much better hint how to fix it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: in the section mismatch check try harder to find symbolsSam Ravnborg2006-03-051-1/+16
| | | | | | | | | | | | | | | | | | When searching for symbols the only check performed was if offset equals st_value. Adding an additional check to see if st_name points t a valid name made us sort out a few more false positives and let us report more correct names in warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: fix section mismatch check for unwind on IA64Sam Ravnborg2006-03-051-2/+2
| | | | | | | | | | | | Parameters to strstr() was reversed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: kill false positives from section mismatch warnings for powerpcSam Ravnborg2006-03-051-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building an allmodconfig kernel for ppc64 revealed a number of false positives - originally reported by Andrew Morton. This patch removes most if not all false positives for ppc64: Section .opd The .opd section contains function descriptors at least for ppc64. So ignore it for .init.text (was ignored for .exit.text). See description of function descriptors here: http://www.linuxbase.org/spec/ELF/ppc64/PPC-elf64abi-1.7.html Section .toc1 ppc64 places some static variables in .toc1 - ignore the. Section __bug_tabe BUG() and friends uses __bug_table. Ignore warnings from that section. Module parameters are placed in .data.rel for ppc64, for adjust pattern to match on section named .data* Tested with gcc: 3.4.0 and binutils 2.15.90.0.3 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: kill trailing whitespace in modpost & friendsSam Ravnborg2006-03-034-43/+43
| | | | | | | | Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: whitelist false section mismatch warningsSam Ravnborg2006-02-261-0/+89
| | | | | | | | | | | | | | | | | | | | | | | | In several cases the section mismatch check triggered false warnings. Following patch introduce a whitelist to 'false positives' are not warned of. Two types of patterns are recognised: 1) Typical case when a module parameter is _initdata 2) When a function pointer is assigned to a driver structure In both patterns we rely on the actual name of the variable assigned Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: Add copyright to modpost.cSam Ravnborg2006-02-261-1/+1
| | | | | | | | | | | | | | It seems popular to protect your work with copyright, so I decided to do so for modpost which I patch a great deal atm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: do not warn when unwind sections references .init/.exit sectionsSam Ravnborg2006-02-221-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrew Morton reported a number of false positives for ia64 - like these: WARNING: drivers/acpi/button.o - Section mismatch: reference to .init.text: from .IA_64.unwind.init.text after '' (at offset 0x0) WARNING: drivers/acpi/button.o - Section mismatch: reference to .exit.text: from .IA_64.unwind.exit.text after '' (at offset 0x0) WARNING: drivers/acpi/processor.o - Section mismatch: reference to .init.text: from .IA_64.unwind after '' (at offset 0x1e8) They are all false positives - or at least the .c code looks OK. It is not known why sometimes a section name is appended and sometimes not. Fix is to accept references from all sections that includes "unwind." in the name. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: fix modpost compile with older gccakpm@osdl.org2006-02-221-3/+3
| | | | | | | | | | | | | | | | The kernel now requires that CC be 3.1.0 or higher. But we shouldn't place that requirement upon HOSTCC unless we really need to. Fixes my ia64 problem. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: include symbol names in section mismatch warningsSam Ravnborg2006-02-191-17/+47
| | | | | | | | | | | | | | Try to look up the symbol that is referenced. Include the symbol name in the warning message. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: fix segfault in modpostSam Ravnborg2006-02-191-1/+1
| | | | | | | | | | | | | | Do not try to look up section name until we know it is not a special section. Otherwise we will address outside legal space and segfault. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: do not segfault in modpost if MODVERDIR is not definedSam Ravnborg2006-02-191-3/+6
| | | | | | | | | | | | | | | | A combination of calling modpost with option -a and MODVERDIR undefined caused segmentation fault. So provide a default value and accept the error messages it generates instead. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: check for section mismatch during modpost stageSam Ravnborg2006-02-192-0/+268
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Section mismatch is identified as references to .init* sections from non .init sections. And likewise references to .exit.* sections outside .exit sections. .init.* sections are discarded after a module is initialized and references to .init.* sections are oops candidates. .exit.* sections are discarded when a module is built-in and thus references to .exit are also oops candidates. The checks were possible to do using 'make buildcheck' which called the two perl scripts: reference_discarded.pl and reference_init.pl. This patch just moves the same functionality inside modpost and the scripts are then obsoleted. They will though be kept for a while so users can do double checks - but note that some .o files are skipped by the perl scripts so result is not 1:1. All credit for the concept goes to Keith Owens who implemented the original perl scrips - this patch just moves it to modpost. Compared to the perl script the implmentation in modpost will be run for each kernel build - thus catching the error much sooner, but the downside is that the individual .o file are not always identified. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: warn about duplicate exported symbolsSam Ravnborg2006-02-191-3/+13
| | | | | | | | | | | | | | | | In modpost introduce a check for symbols exported twice. This check caught only one victim (inet_bind_bucket_create) for which a patch is already sent to netdev. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: improved modversioning support for external modulesSam Ravnborg2006-02-191-50/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With following patch a second option is enabled to obtain symbol information from a second external module when a external module is build. The recommended approach is to use a common kbuild file but that may be impractical in certain cases. With this patch one can copy over a Module.symvers from one external module to make symbols (and symbol versions) available for another external module. Updated documentation in Documentation/kbuild/modules.txt Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: apply CodingStyle to modpost.cSam Ravnborg2006-02-191-70/+54
| | | | | | | | | | | | Just some light CodingStyle updates - no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
| * kbuild: use warn()/fatal() consistent in modpostSam Ravnborg2006-02-194-32/+27
| | | | | | | | | | | | modpost.c provides warn() and fatal() - so use them all over the place. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | [PATCH] kbuild: fix buffer overflow in modpostSam Ravnborg2006-03-171-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jiri Benc <jbenc@suse.cz> reported that modpost would stop with SIGABRT if used with long filepaths. The error looked like: > Building modules, stage 2. > MODPOST > *** glibc detected *** scripts/mod/modpost: realloc(): invalid next size: +0x0809f588 *** > [...] Fix this by allocating at least the required memory + SZ bytes each time. Before we sometimes ended up allocating too little memory resuting in the glibc detected bug above. Based on patch originally submitted by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] s390: fix match in ccw modaliasBastian Blank2006-03-061-1/+1
|/ | | | | | | | | | | Fix matching of devmodel in modaliases. It breaks automatic loading of any dasd module. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* modpost/file2alias: Fix typoBrian Gerst2006-01-081-1/+1
| | | | | | | SND_MAX should be FF_MAX Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2006-01-041-1/+61
|\ | | | | | | Trivial manual merge fixup for usb_find_interface clashes.
| * [PATCH] Input: add modalias supportRusty Russell2006-01-041-1/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here's the patch for modalias support for input classes. It uses comma-separated numbers, and doesn't describe all the potential keys (no module currently cares, and that would make the strings huge). The changes to input.h are to move the definitions needed by file2alias outside __KERNEL__. I chose not to move those definitions to mod_devicetable.h, because there are so many that it might break compile of something else in the kernel. The rest is fairly straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | kbuild: set correct KBUILD_MODNAME when using well known kernel symbols as ↵Ustyugov Roman2005-12-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | module names This patch fixes a problem when we use well known kernel symbols as module names. For example, if module source name is current.c, idle_stack.c or etc., we have a bad KBUILD_MODNAME value. For example, KBUILD_MODNAME will be "get_current()" instead of "current", or "(init_thread_union.stack)" instead of "idle_task". The trick is to define a stringify macro on the commandline - named KBUILD_STR for namespace reasons - and then to stringify the module name. There are a few uses of KBUILD_MODNAME throughout the tree but the usage is for debug and will not be harmed by this change so left untouched for now. While at it KBUILD_BASENAME was changed too. Any spinlock usage in the unix module would have created wrong section names without it. Usage in spinlock.h fixed so it no longer stringify KBUILD_BASENAME. Original patch from Ustyogov Roman - all bugs introduced by me. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* | kbuild: Fix crc-error warning on modulesLuke Yang2005-12-251-2/+2
|/ | | | | | | | | | | | | | | | This is the patch for the following issue: In include/linux/module.h, "__crc_" and "__ksymtab_" are hard coded to be the prefix for some kinds of symbols (CRC symbol and ksymtab section). But in script /mod/modpost.c, MODULE_SYMBOL_PREFIX##"__crc_" is used as the prefix to search CRC symbols. So if an architecture (such as h8300 or Blackfin) defines MODULE_SYMBOL_PREFIX as not NULL ("_"), modpost will always warn about "no invalid crc". And it is the same with KSYMTAB_PFX. Signed-off-by: Luke Yang <luke.adi@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [PATCH] I2C: add i2c module alias for i2c drivers to useGreg Kroah-Hartman2005-10-281-0/+10
| | | | | | This is the start of adding hotplug-like support for i2c devices. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud