summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* Revert "ipv4: arp announce, arp_proxy and windows ip conflict verification"Eric W. Biederman2009-06-301-5/+2
| | | | | | | | | | | | | | | | | | | | This reverts commit 73ce7b01b4496a5fbf9caf63033c874be692333f. After discovering that we don't listen to gratuitious arps in 2.6.30 I tracked the failure down to this commit. The patch makes absolutely no sense. RFC2131 RFC3927 and RFC5227. are all in agreement that an arp request with sip == 0 should be used for the probe (to prevent learning) and an arp request with sip == tip should be used for the gratitous announcement that people can learn from. It appears the author of the broken patch got those two cases confused and modified the code to drop all gratuitous arp traffic. Ouch! Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Fix fib_trie rebalancing, part 3Jarek Poplawski2009-06-301-0/+3
| | | | | | | | | | | Alas current delaying of freeing old tnodes by RCU in trie_rebalance is still not enough because we can free a top tnode before updating a t->trie pointer. Reported-by: Pawel Staszewski <pstaszewski@itcare.pl> Tested-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: xmit sctp packet always return no route errorWei Yongjun2009-06-291-1/+1
| | | | | | | | | | | Commit 'net: skb->dst accessors'(adf30907d63893e4208dfe3f5c88ae12bc2f25d5) broken the sctp protocol stack, the sctp packet can never be sent out after Eric Dumazet's patch, which have typo in the sctp code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Vlad Yasevich <vladisalv.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: use xfrm_addr_cmp() instead of compare addresses directlyWei Yongjun2009-06-291-49/+8
| | | | | | | | Clean up to use xfrm_addr_cmp() instead of compare addresses directly. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: Do not tack on TSO data to non-TSO packetHerbert Xu2009-06-291-5/+10
| | | | | | | | | | | | | If a socket starts out on a non-TSO route, and then switches to a TSO route, then we will tack on data to the tail of the tx queue even if it started out life as non-TSO. This is suboptimal because all of it will then be copied and checksummed unnecessarily. This patch fixes this by ensuring that skb->ip_summed is set to CHECKSUM_PARTIAL before appending extra data beyond the MSS. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: Stop non-TSO packets morphing into TSOHerbert Xu2009-06-291-1/+2
| | | | | | | | | | | | | | If a socket starts out on a non-TSO route, and then switches to a TSO route, then the tail on the tx queue can morph into a TSO packet, causing mischief because the rest of the stack does not expect a partially linear TSO packet. This patch fixes this by ensuring that skb->ip_summed is set to CHECKSUM_PARTIAL before declaring a packet as TSO. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵David S. Miller2009-06-291-0/+6
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
| * nl802154: add module license and descriptionDmitry Eremin-Solenikov2009-06-291-0/+3
| | | | | | | | Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
| * nl802154: fix Oops in ieee802154_nl_get_devDmitry Eremin-Solenikov2009-06-291-0/+3
| | | | | | | | | | | | | | | | ieee802154_nl_get_dev() lacks check for the existance of the device that was returned by dev_get_XXX, thus resulting in Oops for non-existing devices. Fix it. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
* | Merge branch 'master' of ↵David S. Miller2009-06-295-17/+78
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
| * | netfilter: xtables: conntrack match revision 2Jan Engelhardt2009-06-291-6/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Philip, the UNTRACKED state bit does not fit within the 8-bit state_mask member. Enlarge state_mask and give status_mask a few more bits too. Reported-by: Philip Craig <philipc@snapgear.com> References: http://markmail.org/thread/b7eg6aovfh4agyz7 Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | netfilter: tcp conntrack: fix unacknowledged data detection with NATPatrick McHardy2009-06-292-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When NAT helpers change the TCP packet size, the highest seen sequence number needs to be corrected. This is currently only done upwards, when the packet size is reduced the sequence number is unchanged. This causes TCP conntrack to falsely detect unacknowledged data and decrease the timeout. Fix by updating the highest seen sequence number in both directions after packet mangling. Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | nf_conntrack: Use rcu_barrier()Jesper Dangaard Brouer2009-06-252-2/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RCU barriers, rcu_barrier(), is inserted two places. In nf_conntrack_expect.c nf_conntrack_expect_fini() before the kmem_cache_destroy(). Firstly to make sure the callback to the nf_ct_expect_free_rcu() code is still around. Secondly because I'm unsure about the consequence of having in flight nf_ct_expect_free_rcu/kmem_cache_free() calls while doing a kmem_cache_destroy() slab destroy. And in nf_conntrack_extend.c nf_ct_extend_unregister(), inorder to wait for completion of callbacks to __nf_ct_ext_free_rcu(), which is invoked by __nf_ct_ext_add(). It might be more efficient to call rcu_barrier() in nf_conntrack_core.c nf_conntrack_cleanup_net(), but thats make it more difficult to read the code (as the callback code in located in nf_conntrack_extend.c). Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Patrick McHardy <kaber@trash.net>
* | gro: Flush GRO packets in napi_disable_pending pathHerbert Xu2009-06-261-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When NAPI is disabled while we're in net_rx_action, we end up calling __napi_complete without flushing GRO packets. This is a bug as it would cause the GRO packets to linger, of course it also literally BUGs to catch error like this :) This patch changes it to napi_complete, with the obligatory IRQ reenabling. This should be safe because we've only just disabled IRQs and it does not materially affect the test conditions in between. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | inet: Call skb_orphan before tproxy activatesHerbert Xu2009-06-262-0/+6
| | | | | | | | | | | | | | | | | | | | As transparent proxying looks up the socket early and assigns it to the skb for later processing, we must drop any existing socket ownership prior to that in order to distinguish between the case where tproxy is active and where it is not. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mac80211: Use rcu_barrier() on unload.Jesper Dangaard Brouer2009-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The mac80211 module uses rcu_call() thus it should use rcu_barrier() on module unload. The rcu_barrier() is placed in mech.c ieee80211_stop_mesh() which is invoked from ieee80211_stop() in case vif.type == NL80211_IFTYPE_MESH_POINT. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sunrpc: Use rcu_barrier() on unload.Jesper Dangaard Brouer2009-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunrpc module uses rcu_call() thus it should use rcu_barrier() on module unload. Have not verified that the possibility for new call_rcu() callbacks has been disabled. As a hint for checking, the functions calling call_rcu() (unx_destroy_cred and generic_destroy_cred) are registered as crdestroy function pointer in struct rpc_credops. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: Use rcu_barrier() instead of syncronize_net() on unload.Jesper Dangaard Brouer2009-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | When unloading modules that uses call_rcu() callbacks, then we must use rcu_barrier(). This module uses syncronize_net() which is not enough to be sure that all callback has been completed. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Use rcu_barrier() on module unload.Jesper Dangaard Brouer2009-06-261-0/+2
| | | | | | | | | | | | | | | | | | The ipv6 module uses rcu_call() thus it should use rcu_barrier() on module unload. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | decnet: Use rcu_barrier() on module unload.Jesper Dangaard Brouer2009-06-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The decnet module unloading as been disabled with a '#if 0' statement, because it have had issues. We add a rcu_barrier() anyhow for correctness. The maintainer (Chrissie Caulfield) will look into the unload issue when time permits. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Chrissie Caulfield <christine.caulfield@googlemail.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: avoid wraparound for expired preferred lifetimeJens Rosenboom2009-06-251-1/+4
| | | | | | | | | | | | | | | | Avoid showing wrong high values when the preferred lifetime of an address is expired. Signed-off-by: Jens Rosenboom <me@jayr.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: missing check ACK flag of received segment in FIN-WAIT-2 stateWei Yongjun2009-06-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFC0793 defined that in FIN-WAIT-2 state if the ACK bit is off drop the segment and return[Page 72]. But this check is missing in function tcp_timewait_state_process(). This cause the segment with FIN flag but no ACK has two diffent action: Case 1: Node A Node B <------------- FIN,ACK (enter FIN-WAIT-1) ACK -------------> (enter FIN-WAIT-2) FIN -------------> discard (move sk to tw list) Case 2: Node A Node B <------------- FIN,ACK (enter FIN-WAIT-1) ACK -------------> (enter FIN-WAIT-2) (move sk to tw list) FIN -------------> <------------- ACK This patch fixed the problem. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Phonet: generate Netlink RTM_DELADDR when destroying a deviceRémi Denis-Courmont2009-06-251-21/+31
| | | | | | | | | | | | | | | | Netlink address deletion events were not sent when a network device vanished neither when Phonet was unloaded. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Phonet: publicize the Netlink notification functionRémi Denis-Courmont2009-06-251-2/+2
| | | | | | | | | | Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipsec: Fix name of CAST algorithmHerbert Xu2009-06-241-2/+2
|/ | | | | | | | Our CAST algorithm is called cast5, not cast128. Clearly nobody has ever used it :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2009-06-2427-61/+98
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: bnx2: Fix the behavior of ethtool when ONBOOT=no qla3xxx: Don't sleep while holding lock. qla3xxx: Give the PHY time to come out of reset. ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off net: Move rx skb_orphan call to where needed ipv6: Use correct data types for ICMPv6 type and code net: let KS8842 driver depend on HAS_IOMEM can: let SJA1000 driver depend on HAS_IOMEM netxen: fix firmware init handshake netxen: fix build with without CONFIG_PM netfilter: xt_rateest: fix comparison with self netfilter: xt_quota: fix incomplete initialization netfilter: nf_log: fix direct userspace memory access in proc handler netfilter: fix some sparse endianess warnings netfilter: nf_conntrack: fix conntrack lookup race netfilter: nf_conntrack: fix confirmation race condition netfilter: nf_conntrack: death_by_timeout() fix
| * ipv4 routing: Ensure that route cache entries are usable and reclaimable ↵Neil Horman2009-06-231-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with caching is off When route caching is disabled (rt_caching returns false), We still use route cache entries that are created and passed into rt_intern_hash once. These routes need to be made usable for the one call path that holds a reference to them, and they need to be reclaimed when they're finished with their use. To be made usable, they need to be associated with a neighbor table entry (which they currently are not), otherwise iproute_finish2 just discards the packet, since we don't know which L2 peer to send the packet to. To do this binding, we need to follow the path a bit higher up in rt_intern_hash, which calls arp_bind_neighbour, but not assign the route entry to the hash table. Currently, if caching is off, we simply assign the route to the rp pointer and are reutrn success. This patch associates us with a neighbor entry first. Secondly, we need to make sure that any single use routes like this are known to the garbage collector when caching is off. If caching is off, and we try to hash in a route, it will leak when its refcount reaches zero. To avoid this, this patch calls rt_free on the route cache entry passed into rt_intern_hash. This places us on the gc list for the route cache garbage collector, so that when its refcount reaches zero, it will be reclaimed (Thanks to Alexey for this suggestion). I've tested this on a local system here, and with these patches in place, I'm able to maintain routed connectivity to remote systems, even if I set /proc/sys/net/ipv4/rt_cache_rebuild_count to -1, which forces rt_caching to return false. Signed-off-by: Neil Horman <nhorman@redhat.com> Reported-by: Jarek Poplawski <jarkao2@gmail.com> Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Move rx skb_orphan call to where neededHerbert Xu2009-06-234-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to get the tun driver to account packets, we need to be able to receive packets with destructors set. To be on the safe side, I added an skb_orphan call for all protocols by default since some of them (IP in particular) cannot handle receiving packets destructors properly. Now it seems that at least one protocol (CAN) expects to be able to pass skb->sk through the rx path without getting clobbered. So this patch attempts to fix this properly by moving the skb_orphan call to where it's actually needed. In particular, I've added it to skb_set_owner_[rw] which is what most users of skb->destructor call. This is actually an improvement for tun too since it means that we only give back the amount charged to the socket when the skb is passed to another socket that will also be charged accordingly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Oliver Hartkopp <olver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Use correct data types for ICMPv6 type and codeBrian Haley2009-06-2316-32/+32
| | | | | | | | | | | | | | | | | | Change all the code that deals directly with ICMPv6 type and code values to use u8 instead of a signed int as that's the actual data type. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netfilter: xt_rateest: fix comparison with selfPatrick McHardy2009-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As noticed by Török Edwin <edwintorok@gmail.com>: Compiling the kernel with clang has shown this warning: net/netfilter/xt_rateest.c:69:16: warning: self-comparison always results in a constant value ret &= pps2 == pps2; ^ Looking at the code: if (info->flags & XT_RATEEST_MATCH_BPS) ret &= bps1 == bps2; if (info->flags & XT_RATEEST_MATCH_PPS) ret &= pps2 == pps2; Judging from the MATCH_BPS case it seems to be a typo, with the intention of comparing pps1 with pps2. http://bugzilla.kernel.org/show_bug.cgi?id=13535 Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: xt_quota: fix incomplete initializationJan Engelhardt2009-06-221-0/+1
| | | | | | | | | | | | | | | | | | | | Commit v2.6.29-rc5-872-gacc738f ("xtables: avoid pointer to self") forgot to copy the initial quota value supplied by iptables into the private structure, thus counting from whatever was in the memory kmalloc returned. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: nf_log: fix direct userspace memory access in proc handlerPatrick McHardy2009-06-221-5/+11
| | | | | | | | Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: fix some sparse endianess warningsPatrick McHardy2009-06-222-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | net/netfilter/xt_NFQUEUE.c:46:9: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:46:9: expected unsigned int [unsigned] [usertype] ipaddr net/netfilter/xt_NFQUEUE.c:46:9: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:68:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:68:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:68:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:69:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:69:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:69:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:70:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:70:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:70:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:71:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:71:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:71:10: got restricted unsigned int net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: nf_conntrack: fix conntrack lookup racePatrick McHardy2009-06-221-2/+4
| | | | | | | | | | | | | | | | | | | | The RCU protected conntrack hash lookup only checks whether the entry has a refcount of zero to decide whether it is stale. This is not sufficient, entries are explicitly removed while there is at least one reference left, possibly more. Explicitly check whether the entry has been marked as dying to fix this. Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: nf_conntrack: fix confirmation race conditionPatrick McHardy2009-06-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | New connection tracking entries are inserted into the hash before they are fully set up, namely the CONFIRMED bit is not set and the timer not started yet. This can theoretically lead to a race with timer, which would set the timeout value to a relative value, most likely already in the past. Perform hash insertion as the final step to fix this. Signed-off-by: Patrick McHardy <kaber@trash.net>
| * netfilter: nf_conntrack: death_by_timeout() fixEric Dumazet2009-06-221-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | death_by_timeout() might delete a conntrack from hash list and insert it in dying list. nf_ct_delete_from_lists(ct); nf_ct_insert_dying_list(ct); I believe a (lockless) reader could *catch* ct while doing a lookup and miss the end of its chain. (nulls lookup algo must check the null value at the end of lookup and should restart if the null value is not the expected one. cf Documentation/RCU/rculist_nulls.txt for details) We need to change nf_conntrack_init_net() and use a different "null" value, guaranteed not being used in regular lists. Choose very large values, since hash table uses [0..size-1] null values. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
* | Merge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsdLinus Torvalds2009-06-224-60/+129
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits) SUNRPC: Fix the TCP server's send buffer accounting nfsd41: Backchannel: minorversion support for the back channel nfsd41: Backchannel: cleanup nfs4.0 callback encode routines nfsd41: Remove ip address collision detection case nfsd: optimise the starting of zero threads when none are running. nfsd: don't take nfsd_mutex twice when setting number of threads. nfsd41: sanity check client drc maxreqs nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct NFS: kill off complicated macro 'PROC' sunrpc: potential memory leak in function rdma_read_xdr nfsd: minor nfsd_vfs_write cleanup nfsd: Pull write-gathering code out of nfsd_vfs_write nfsd: track last inode only in use_wgather case sunrpc: align cache_clean work's timer nfsd: Use write gathering only with NFSv2 NFSv4: kill off complicated macro 'PROC' NFSv4: do exact check about attribute specified knfsd: remove unreported filehandle stats counters knfsd: fix reply cache memory corruption knfsd: reply cache cleanups ...
| * | SUNRPC: Fix the TCP server's send buffer accountingTrond Myklebust2009-06-181-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the sunrpc server is refusing to allow us to process new RPC calls if the TCP send buffer is 2/3 full, even if we do actually have enough free space to guarantee that we can send another request. The following patch fixes svc_tcp_has_wspace() so that we only stop processing requests if we know that the socket buffer cannot possibly fit another reply. It also fixes the tcp write_space() callback so that we only clear the SOCK_NOSPACE flag when the TCP send buffer is less than 2/3 full. This should ensure that the send window will grow as per the standard TCP socket code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | sunrpc: potential memory leak in function rdma_read_xdrChristian Engelmayer2009-06-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the check on ch_count fails the cleanup path is skipped and the previously allocated memory 'rpl_map', 'chl_map' is not freed. Reported by Coverity. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | sunrpc: align cache_clean work's timerAnton Blanchard2009-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Align cache_clean work. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | Merge commit 'v2.6.30' into for-2.6.31J. Bruce Fields2009-06-1585-763/+961
| |\ \
| * | | SUNRPC: Clean up one_sock_name()Chuck Lever2009-04-281-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up svc_one_sock_name() by setting up automatic variables for frequently used expressions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | SUNRPC: Support PF_INET6 in one_sock_name()Chuck Lever2009-04-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an arm to the switch statement in svc_one_sock_name() so it can construct the name of PF_INET6 sockets properly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aime Le Rouzic <aime.le-rouzic@bull.net> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | SUNRPC: Switch one_sock_name() to use snprintf()Chuck Lever2009-04-281-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use snprintf() in one_sock_name() to prevent overflowing the output buffer. If the name doesn't fit in the buffer, the buffer is filled in with an empty string, and -ENAMETOOLONG is returned. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | SUNRPC: pass buffer size to svc_sock_names()Chuck Lever2009-04-281-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust the synopsis of svc_sock_names() to pass in the size of the output buffer. Add a documenting comment. This is a cosmetic change for now. A subsequent patch will make sure the buffer length is passed to one_sock_name(), where the length will actually be useful. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | SUNRPC: pass buffer size to svc_addsock()Chuck Lever2009-04-281-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust the synopsis of svc_addsock() to pass in the size of the output buffer. Add a documenting comment. This is a cosmetic change for now. A subsequent patch will make sure the buffer length is passed to one_sock_name(), where the length will actually be useful. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | NFSD: Prevent a buffer overflow in svc_xprt_names()Chuck Lever2009-04-281-17/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The svc_xprt_names() function can overflow its buffer if it's so near the end of the passed in buffer that the "name too long" string still doesn't fit. Of course, it could never tell if it was near the end of the passed in buffer, since its only caller passes in zero as the buffer length. Let's make this API a little safer. Change svc_xprt_names() so it *always* checks for a buffer overflow, and change its only caller to pass in the correct buffer length. If svc_xprt_names() does overflow its buffer, it now fails with an ENAMETOOLONG errno, instead of trying to write a message at the end of the buffer. I don't like this much, but I can't figure out a clean way that's always safe to return some of the names, *and* an indication that the buffer was not long enough. The displayed error when doing a 'cat /proc/fs/nfsd/portlist' is "File name too long". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | SUNRPC: Fix error return value of svc_addr_len()Chuck Lever2009-04-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The svc_addr_len() helper function returns -EAFNOSUPPORT if it doesn't recognize the address family of the passed-in socket address. However, the return type of this function is size_t, which means -EAFNOSUPPORT is turned into a very large positive value in this case. The check in svc_udp_recvfrom() to see if the return value is less than zero therefore won't work at all. Additionally, handle_connect_req() passes this value directly to memset(). This could cause memset() to clobber a large chunk of memory if svc_addr_len() has returned an error. Currently the address family of these addresses, however, is known to be supported long before handle_connect_req() is called, so this isn't a real risk. Change the error return value of svc_addr_len() to zero, which fits in the range of size_t, and is safer to pass to memset() directly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
| * | | net/sunrpc/svc_xprt.c: fix sparse warningsH Hartley Sweeten2009-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following sparse warnings in net/sunrpc/svc_xprt.c. warning: symbol 'svc_recv' was not declared. Should it be static? warning: symbol 'svc_drop' was not declared. Should it be static? warning: symbol 'svc_send' was not declared. Should it be static? warning: symbol 'svc_close_all' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* | | | Merge branch 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds2009-06-2211-75/+928
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (128 commits) nfs41: sunrpc: xprt_alloc_bc_request() should not use spin_lock_bh() nfs41: Move initialization of nfs4_opendata seq_res to nfs4_init_opendata_res nfs: remove unnecessary NFS_INO_INVALID_ACL checks NFS: More "sloppy" parsing problems NFS: Invalid mount option values should always fail, even with "sloppy" NFS: Remove unused XDR decoder functions NFS: Update MNT and MNT3 reply decoding functions NFS: add XDR decoder for mountd version 3 auth-flavor lists NFS: add new file handle decoders to in-kernel mountd client NFS: Add separate mountd status code decoders for each mountd version NFS: remove unused function in fs/nfs/mount_clnt.c NFS: Use xdr_stream-based XDR encoder for MNT's dirpath argument NFS: Clean up MNT program definitions lockd: Don't bother with RPC ping for NSM upcalls lockd: Update NSM state from SM_MON replies NFS: Fix false error return from nfs_callback_up() if ipv6.ko is not available NFS: Return error code from nfs_callback_up() to user space NFS: Do not display the setting of the "intr" mount option NFS: add support for splice writes nfs41: Backchannel: CB_SEQUENCE validation ...
OpenPOWER on IntegriCloud