summaryrefslogtreecommitdiffstats
path: root/net/tipc
Commit message (Collapse)AuthorAgeFilesLines
* tipc: add ip/udp media typeErik Hugne2015-03-056-8/+470
| | | | | | | | | | | | | | | The ip/udp bearer can be configured in a point-to-point mode by specifying both local and remote ip/hostname, or it can be enabled in multicast mode, where links are established to all tipc nodes that have joined the same multicast group. The multicast IP address is generated based on the TIPC network ID, but can be overridden by using another multicast address as remote ip. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: increase size of tipc discovery messagesErik Hugne2015-03-051-4/+3
| | | | | | | | | | The payload area following the TIPC discovery message header is an opaque area defined by the media. INT_H_SIZE was enough for Ethernet/IB/IPv4 but needs to be expanded to carry IPv6 addressing information. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-031-2/+0
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * rhashtable: remove indirection for grow/shrink decision functionsDaniel Borkmann2015-02-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, all real users of rhashtable default their grow and shrink decision functions to rht_grow_above_75() and rht_shrink_below_30(), so that there's currently no need to have this explicitly selectable. It can/should be generic and private inside rhashtable until a real use case pops up. Since we can make this private, we'll save us this additional indirection layer and can improve insertion/deletion time as well. Reference: http://patchwork.ozlabs.org/patch/443040/ Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Remove iocb argument from sendmsg and recvmsgYing Xue2015-03-021-15/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: Don't use iocb argument in socket layerYing Xue2015-03-021-38/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the iocb argument is used to idenfiy whether or not socket lock is hold before tipc_sendmsg()/tipc_send_stream() is called. But this usage prevents iocb argument from being dropped through sendmsg() at socket common layer. Therefore, in the commit we introduce two new functions called __tipc_sendmsg() and __tipc_send_stream(). When they are invoked, it assumes that their callers have taken socket lock, thereby avoiding the weird usage of iocb argument. Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: make media address offset a common defineErik Hugne2015-02-272-4/+3
| | | | | | | | | | | | | | | | | | | | With the exception of infiniband media which does not use media offsets, the media address is always located at offset 4 in the media info field as defined by the protocol, so we move the definition to the generic bearer.h Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: rename media/msg related definitionsErik Hugne2015-02-274-6/+6
| | | | | | | | | | | | | | | | | | | | The TIPC_MEDIA_ADDR_SIZE and TIPC_MEDIA_ADDR_OFFSET names are misleading, as they actually define the size and offset of the whole media info field and not the address part. This patch does not have any functional changes. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: purge links when bearer is disabledErik Hugne2015-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | If a bearer is disabled by manual intervention, all links over that bearer should be purged, indicated with the 'shutting_down' flag. Otherwise tipc will get confused if a new bearer is enabled using a different media type. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: fix nullpointer bug when subscribing to eventsErik Hugne2015-02-271-19/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a subscription request is sent to a topology server connection, and any error occurs (malformed request, oom or limit reached) while processing this request, TIPC should terminate the subscriber connection. While doing so, it tries to access fields in an already freed (or never allocated) subscription element leading to a nullpointer exception. We fix this by removing the subscr_terminate function and terminate the connection immediately upon any subscription failure. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: only create header copy for name distr messagesErik Hugne2015-02-271-1/+1
|/ | | | | | | | | | | | The TIPC name distributor pushes topology updates to the cluster neighbors. Currently this is done in a unicast manner, and the skb holding the update is cloned for each cluster member. This is unnecessary, as we only modify the destnode field in the header so we change it to do pskb_copy instead. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove tipc_snprintfRichard Alpe2015-02-094-60/+4
| | | | | | | | | | | | | | tipc_snprintf() was heavily utilized by the old netlink API which no longer exists (now netlink compat). In this patch we swap tipc_snprintf() to the identical scnprintf() in the only remaining occurrence. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: nl compat add noop and remove legacy nl frameworkRichard Alpe2015-02-0912-301/+13
| | | | | | | | | | | | | Add TIPC_CMD_NOOP to compat layer and remove the old framework. All legacy nl commands are now converted to the compat layer in netlink_compat.c. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl stats show to nl compatRichard Alpe2015-02-092-35/+15
| | | | | | | | | | | | Convert TIPC_CMD_SHOW_STATS to compat layer. This command does not have any counterpart in the new API, meaning it now solely exists as a function in the compat layer. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl net id get to nl compatRichard Alpe2015-02-092-23/+18
| | | | | | | | | | Convert TIPC_CMD_GET_NETID to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl net id set to nl compatRichard Alpe2015-02-092-26/+14
| | | | | | | | | | Convert TIPC_CMD_SET_NETID to compat doit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl node addr set to nl compatRichard Alpe2015-02-093-27/+27
| | | | | | | | | | Convert TIPC_CMD_SET_NODE_ADDR to compat doit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl node dump to nl compatRichard Alpe2015-02-094-60/+22
| | | | | | | | | | | Convert TIPC_CMD_GET_NODES to compat dumpit and remove global node counter solely used by the legacy API. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl media dump to nl compatRichard Alpe2015-02-094-24/+19
| | | | | | | | | | Convert TIPC_CMD_GET_MEDIA_NAMES to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl socket dump to nl compatRichard Alpe2015-02-094-89/+111
| | | | | | | | | | | | | | | | Convert socket (port) listing to compat dumpit call. If a socket (port) has publications a second dumpit call is issued to collect them and format then into the legacy buffer before continuing to process the sockets (ports). Command converted in this patch: TIPC_CMD_SHOW_PORTS Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl name table dump to nl compatRichard Alpe2015-02-094-190/+101
| | | | | | | | | | | Add functionality for printing a dump header and convert TIPC_CMD_SHOW_NAME_TABLE to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl link stat reset to nl compatRichard Alpe2015-02-094-41/+27
| | | | | | | | | | Convert TIPC_CMD_RESET_LINK_STATS to compat doit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl link prop set to nl compatRichard Alpe2015-02-094-153/+48
| | | | | | | | | | | | | | | Convert setting of link proprieties to compat doit calls. Commands converted in this patch: TIPC_CMD_SET_LINK_TOL TIPC_CMD_SET_LINK_PRI TIPC_CMD_SET_LINK_WINDOW Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl link dump to nl compatRichard Alpe2015-02-094-79/+23
| | | | | | | | | | | Convert TIPC_CMD_GET_LINKS to compat dumpit and remove global link counter solely used by the legacy API. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl link stat to nl compatRichard Alpe2015-02-096-192/+205
| | | | | | | | | | | | | Add functionality for safely appending string data to a TLV without keeping write count in the caller. Convert TIPC_CMD_SHOW_LINK_STATS to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl bearer enable/disable to nl compatRichard Alpe2015-02-094-57/+149
| | | | | | | | | | | | | | | | | | Introduce a framework for transcoding legacy nl action into actions (.doit) calls from the new nl API. This is done by converting the incoming TLV data into netlink data with nested netlink attributes. Unfortunately due to the randomness of the legacy API we can't do this generically so each legacy netlink command requires a specific transcoding recipe. In this case for bearer enable and bearer disable. Convert TIPC_CMD_ENABLE_BEARER and TIPC_CMD_DISABLE_BEARER into doit compat calls. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: convert legacy nl bearer dump to nl compatRichard Alpe2015-02-094-34/+273
| | | | | | | | | | | | | | | | | | | Introduce a framework for dumping netlink data from the new netlink API and formatting it to the old legacy API format. This is done by looping the dump data and calling a format handler for each entity, in this case a bearer. We dump until either all data is dumped or we reach the limited buffer size of the legacy API. Remember, the legacy API doesn't scale. In this commit we convert TIPC_CMD_GET_BEARER_NAMES to use the compat layer. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: move and rename the legacy nl api to "nl compat"Richard Alpe2015-02-0913-76/+130
| | | | | | | | | | | | | The new netlink API is no longer "v2" but rather the standard API and the legacy API is now "nl compat". We split them into separate start/stop and put them in different files in order to further distinguish them. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix bug in socket reception functionJon Paul Maloy2015-02-081-3/+2
| | | | | | | | | | | | | | In commit c637c1035534867b85b78b453c38c495b58e2c5a ("tipc: resolve race problem at unicast message reception") we introduced a time limit for how long the function tipc_sk_eneque() would be allowed to execute its loop. Unfortunately, the test for when this limit is passed was put in the wrong place, resulting in a lost message when the test is true. We fix this by moving the test to before we dequeue the next buffer from the input queue. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: eliminate race condition at multicast receptionJon Paul Maloy2015-02-058-59/+114
| | | | | | | | | | | | | | | | | | | | In a previous commit in this series we resolved a race problem during unicast message reception. Here, we resolve the same problem at multicast reception. We apply the same technique: an input queue serializing the delivery of arriving buffers. The main difference is that here we do it in two steps. First, the broadcast link feeds arriving buffers into the tail of an arrival queue, which head is consumed at the socket level, and where destination lookup is performed. Second, if the lookup is successful, the resulting buffer clones are fed into a second queue, the input queue. This queue is consumed at reception in the socket just like in the unicast case. Both queues are protected by the same lock, -the one of the input queue. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: simplify socket multicast receptionJon Paul Maloy2015-02-056-101/+84
| | | | | | | | | | | | | | | | | | | The structure 'tipc_port_list' is used to collect port numbers representing multicast destination socket on a receiving node. The list is not based on a standard linked list, and is in reality optimized for the uncommon case that there are more than one multicast destinations per node. This makes the list handling unecessarily complex, and as a consequence, even the socket multicast reception becomes more complex. In this commit, we replace 'tipc_port_list' with a new 'struct tipc_plist', which is based on a standard list. We give the new list stack (push/pop) semantics, someting that simplifies the implementation of the function tipc_sk_mcast_rcv(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: simplify connection abort notifications when links breakJon Paul Maloy2015-02-051-40/+29
| | | | | | | | | | | | | | | | The new input message queue in struct tipc_link can be used for delivering connection abort messages to subscribing sockets. This makes it possible to simplify the code for such cases. This commit removes the temporary list in tipc_node_unlock() used for transforming abort subscriptions to messages. Instead, the abort messages are now created at the moment of lost contact, and then added to the last failed link's generic input queue for delivery to the sockets concerned. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: resolve race problem at unicast message receptionJon Paul Maloy2015-02-0511-241/+372
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: use existing sk_write_queue for outgoing packet chainJon Paul Maloy2015-02-051-18/+13
| | | | | | | | | | | | | | | | | | The list for outgoing traffic buffers from a socket is currently allocated on the stack. This forces us to initialize the queue for each sent message, something costing extra CPU cycles in the most critical data path. Later in this series we will introduce a new safe input buffer queue, something that would force us to initialize even the spinlock of the outgoing queue. A closer analysis reveals that the queue always is filled and emptied within the same lock_sock() session. It is therefore safe to use a queue aggregated in the socket itself for this purpose. Since there already exists a queue for this in struct sock, sk_write_queue, we introduce use of that queue in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: split up function tipc_msg_eval()Jon Paul Maloy2015-02-053-43/+48
| | | | | | | | | | | | | | | | | | | | The function tipc_msg_eval() is in reality doing two related, but different tasks. First it tries to find a new destination for named messages, in case there was no first lookup, or if the first lookup failed. Second, it does what its name suggests, evaluating the validity of the message and its destination, and returning an appropriate error code depending on the result. This is confusing, and in this commit we choose to break it up into two functions. A new function, tipc_msg_lookup_dest(), first attempts to find a new destination, if the message is of the right type. If this lookup fails, or if the message should not be subject to a second lookup, the already existing tipc_msg_reverse() is called. This function performs prepares the message for rejection, if applicable. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: enqueue arrived buffers in socket in separate functionJon Paul Maloy2015-02-051-15/+31
| | | | | | | | | | | The code for enqueuing arriving buffers in the function tipc_sk_rcv() contains long code lines and currently goes to two indentation levels. As a cosmetic preparaton for the next commits, we break it out into a separate function. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: simplify message forwarding and rejection in socket layerJon Paul Maloy2015-02-051-62/+58
| | | | | | | | | | | | | | | | | | | | Despite recent improvements, the handling of error codes and return values at reception of messages in the socket layer is still confusing. In this commit, we try to make it more comprehensible. First, we separate between the return values coming from the functions called by tipc_sk_rcv(), -those are TIPC specific error codes, and the return values returned by tipc_sk_rcv() itself. Second, we don't use the returned TIPC error code as indication for whether a buffer should be forwarded/rejected or not; instead we use the buffer pointer passed along with filter_msg(). This separation is necessary because we sometimes want to forward messages even when there is no error (i.e., protocol messages and successfully secondary looked up data messages). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: reduce usage of context info in socket and linkJon Paul Maloy2015-02-0510-91/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The most common usage of namespace information is when we fetch the own node addess from the net structure. This leads to a lot of passing around of a parameter of type 'struct net *' between functions just to make them able to obtain this address. However, in many cases this is unnecessary. The own node address is readily available as a member of both struct tipc_sock and tipc_link, and can be fetched from there instead. The fact that the vast majority of functions in socket.c and link.c anyway are maintaining a pointer to their respective base structures makes this option even more compelling. In this commit, we introduce the inline functions tsk_own_node() and link_own_node() to make it easy for functions to fetch the node address from those structs instead of having to pass along and dereference the namespace struct. In particular, we make calls to the msg_xx() functions in msg.{h,c} context independent by directly passing them the own node address as parameter when needed. Those functions should be regarded as leaves in the code dependency tree, and it is hence desirable to keep them namspace unaware. Apart from a potential positive effect on cache behavior, these changes make it easier to introduce the changes that will follow later in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-davem' of ↵David S. Miller2015-02-042-7/+14
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs More iov_iter work from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
| * tipc: tipc ->sendmsg() conversionAl Viro2015-02-042-7/+14
| | | | | | | | | | | | | | | | This one needs to copy the same data from user potentially more than once. Sadly, MTU changes can trigger that ;-/ Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | tipc: separate link starting event from link timeout eventJon Paul Maloy2015-02-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a new link instance is created, it is trigged to start by sending it a TIPC_STARTING_EVT, whereafter a regular link reset is applied to it. The starting event is codewise treated as a timeout event, and prompts a link RESET message to be sent to the peer node, carrying a link session identifier. The later link_reset() call nudges this session identifier, whereafter all subsequent RESET messages will be sent out with the new identifier. The latter session number overrides the former, causing the peer to unconditionally accept it irrespective of its current working state. We don't think that this causes any problem, but it is not in accordance with the protocol spec, and may cause confusion when debugging TIPC sessions. To avoid this, we make the starting event distinct from the subsequent timeout events, by not allowing the former to send out any RESET message. This eliminates the described problem. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: eliminate race during node creationJon Paul Maloy2015-02-042-13/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instances of struct node are created in the function tipc_disc_rcv() under the assumption that there is no race between received discovery messages arriving from the same node. This assumption is wrong. When we use more than one bearer, it is possible that discovery messages from the same node arrive at the same moment, resulting in creation of two instances of struct tipc_node. This may later cause confusion during link establishment, and may result in one of the links never becoming activated. We fix this by making lookup and potential creation of nodes atomic. Instead of first looking up the node, and in case of failure, create it, we now start with looking up the node inside node_link_create(), and return a reference to that one if found. Otherwise, we go ahead and create the node as we did before. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: avoid stale link after aborted failoverJon Paul Maloy2015-02-042-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During link failover it may happen that the remaining link goes down while it is still in the process of taking over traffic from a previously failed link. When this happens, we currently abort the failover procedure and reset the first failed link to non-failover mode, so that it will be ready to re-establish contact with its peer when it comes available. However, if the first link goes down because its bearer was manually disabled, it is not enough to reset it; it must also be deleted; which is supposed to happen when the failover procedure is finished. Otherwise it will remain a zombie link: attached to the owner node structure, in mode LINK_STOPPED, and permanently blocking any re- establishing of the link to the peer via the interface in question. We fix this by amending the failover abort procedure. Apart from resetting the link to non-failover state, we test if the link is also in LINK_STOPPED mode. If so, we delete it, using the conditional tipc_link_delete() function introduced in the previous commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: add reference count to struct tipc_linkJon Paul Maloy2015-02-042-31/+50
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | When a bearer is disabled, all pertaining links will be reset and deleted. However, if there is a second active link towards a killed link's destination, the delete has to be postponed until the failover is finished. During this interval, we currently put the link in zombie mode, i.e., we take it out of traffic, delete its timer, but leave it attached to the owner node structure until all missing packets have been received. When this is done, we detach the link from its node and delete it, assuming that the synchronous timer deletion that was initiated earlier in a different thread has finished. This is unsafe, as the failover may finish before del_timer_sync() has returned in the other thread. We fix this by adding an atomic reference counter of type kref in struct tipc_link. The counter keeps track of the references kept to the link by the owner node and the timer. We then do a conditional delete, based on the reference counter, both after the failover has been finished and when the timer expires, if applicable. Whoever comes last, will actually delete the link. This approach also implies that we can make the deletion of the timer asynchronous. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix excessive network event loggingErik Hugne2015-01-262-21/+21
| | | | | | | | | | | | If a large number of namespaces is spawned on a node and TIPC is enabled in each of these, the excessive printk tracing of network events will cause the system to grind down to a near halt. The traces are still of debug value, so instead of removing them completely we fix it by changing the link state and node availability logging debug traces. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix socket list regression in new nl apiRichard Alpe2015-01-181-12/+18
| | | | | | | | | | | | | | | | | Commit 07f6c4bc (tipc: convert tipc reference table to use generic rhashtable) introduced a problem with port listing in the new netlink API. It broke the resume functionality resulting in a never ending loop. This was caused by starting with the first hash table every time subsequently never returning an empty skb (terminating). This patch fixes the resume mechanism by keeping a logical reference to the last hash table along with a logical reference to the socket (port) that didn't fit in the previous message. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: correctly handle releasing a not fully initialized sockSasha Levin2015-01-131-2/+5
| | | | | | | | | | Commit f2f9800d4955 "tipc: make tipc node table aware of net namespace" has added a dereference of sock->sk before making sure it's not NULL, which makes releasing a tipc socket NULL pointer dereference for sockets that are not fully initialized. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: remove redundant timer defined in tipc_sock structYing Xue2015-01-131-9/+7
| | | | | | | | | | Remove the redundant timer defined in tipc_sock structure, instead we can directly reuse the sk_timer defined in sock structure. Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make netlink support net namespaceYing Xue2015-01-121-2/+5
| | | | | | | | | | | | | Currently tipc module only allows users sitting on "init_net" namespace to configure it through netlink interface. But now almost each tipc component is able to be aware of net namespace, so it's time to open the permission for users residing in other namespaces, allowing them to configure their own tipc stack instance through netlink interface. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: make tipc random value aware of net namespaceYing Xue2015-01-124-12/+4
| | | | | | | | | | | After namespace is supported, each namespace should own its private random value. So the global variable representing the random value must be moved to tipc_net structure. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud