summaryrefslogtreecommitdiffstats
path: root/net/mac80211
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: Fix a warning on changing to monitor mode from STAMohammed Shafi Shajakhan2012-02-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nothing needs to be done for monitor/AP_VLAN mode on calling ieee80211_bss_info_change_notify -> drv_bss_info_changed with the change flag 'BSS_CHANGED_IDLE'. 'wl1271' seems to use BSS_CHANGED_IDLE only for STA and IBSS mode. further the non-idle state of the monitor mode is taken care by the 'count' variable which counts non-idle interfaces. ieee80211_idle_off(local, "in use") will be called. this fixes the following WARNING when we have initially STA mode (network manager running) and not associated, and change it to monitor mode with network manager disabled and bringing up the monitor mode. this changes the idle state from 'true' (STA unassociated) to 'false' (MONITOR mode) exposed by the commit 405385f8ce7a2ed8f82e216d88b5282142e1288b "mac80211: set bss_conf.idle when vif is connected" WARNING: net/mac80211/main.c:212 ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211]() Hardware name: 64756D6 Pid: 3835, comm: ifconfig Tainted: G O 3.3.0-rc3-wl #9 Call Trace: [<c0133b02>] warn_slowpath_common+0x72/0xa0 [<fc8e8c3f>] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<fc8e8c3f>] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<c0133b52>] warn_slowpath_null+0x22/0x30 [<fc8e8c3f>] ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<fc8f9de3>] __ieee80211_recalc_idle+0x113/0x430 [mac80211] [<fc8fabc6>] ieee80211_do_open+0x156/0x7e0 [mac80211] [<fc8f8a25>] ? ieee80211_check_concurrent_iface+0x25/0x180 [mac80211] [<c015dd9f>] ? raw_notifier_call_chain+0x1f/0x30 [<fc8fb290>] ieee80211_open+0x40/0x80 [mac80211] [<c05894f6>] __dev_open+0x96/0xe0 [<c068fba5>] ? _raw_spin_unlock_bh+0x35/0x40 [<c05881d9>] __dev_change_flags+0x109/0x170 [<c0589423>] dev_change_flags+0x23/0x60 [<c05f3770>] devinet_ioctl+0x6a0/0x770 ieee80211 phy0: device no longer idle - in use Cc: Eliad Peller <eliad@wizery.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: zero initialize count field in ieee80211_tx_rateMohammed Shafi Shajakhan2012-02-211-1/+1
| | | | | | | | | | | | | | | | | rate control algorithms concludes the rate as invalid with rate[i].idx < -1 , while they do also check for rate[i].count is non-zero. it would be safer to zero initialize the 'count' field. recently we had a ath9k rate control crash where the ath9k rate control in ath_tx_status assumed to check only for rate[i].count being non-zero in one instance and ended up in using invalid rate index for 'connection monitoring NULL func frames' which eventually lead to the crash. thanks to Pavel Roskin for fixing it and finding the root cause. https://bugzilla.redhat.com/show_bug.cgi?id=768639 Cc: stable@vger.kernel.org Cc: Pavel Roskin <proski@gnu.org> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: do not call rate control .tx_status before .rate_initFelix Fietkau2012-02-151-1/+1
| | | | | | | | | | Most rate control implementations assume .get_rate and .tx_status are only called once the per-station data has been fully initialized. minstrel_ht crashes if this assumption is violated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: call rate control only after initJohannes Berg2012-02-154-3/+6
| | | | | | | | | | | | | There are situations where we don't have the necessary rate control information yet for station entries, e.g. when associating. This currently doesn't really happen due to the dummy station handling; explicitly disabling rate control when it's not initialised will allow us to remove dummy stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix a rwlock bad magic bugMohammed Shafi Shajakhan2012-02-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | read_lock(&tpt_trig->trig.leddev_list_lock) is accessed via the path ieee80211_open (->) ieee80211_do_open (->) ieee80211_mod_tpt_led_trig (->) ieee80211_start_tpt_led_trig (->) tpt_trig_timer before initializing it. the intilization of this read/write lock happens via the path ieee80211_led_init (->) led_trigger_register, but we are doing 'ieee80211_led_init' after 'ieeee80211_if_add' where we register netdev_ops. so we access leddev_list_lock before initializing it and causes the following bug in chrome laptops with AR928X cards with the following script while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done BUG: rwlock bad magic on CPU#1, wpa_supplicant/358, f5b9eccc Pid: 358, comm: wpa_supplicant Not tainted 3.0.13 #1 Call Trace: [<8137b9df>] rwlock_bug+0x3d/0x47 [<81179830>] do_raw_read_lock+0x19/0x29 [<8137f063>] _raw_read_lock+0xd/0xf [<f9081957>] tpt_trig_timer+0xc3/0x145 [mac80211] [<f9081f3a>] ieee80211_mod_tpt_led_trig+0x152/0x174 [mac80211] [<f9076a3f>] ieee80211_do_open+0x11e/0x42e [mac80211] [<f9075390>] ? ieee80211_check_concurrent_iface+0x26/0x13c [mac80211] [<f9076d97>] ieee80211_open+0x48/0x4c [mac80211] [<812dbed8>] __dev_open+0x82/0xab [<812dc0c9>] __dev_change_flags+0x9c/0x113 [<812dc1ae>] dev_change_flags+0x18/0x44 [<8132144f>] devinet_ioctl+0x243/0x51a [<81321ba9>] inet_ioctl+0x93/0xac [<812cc951>] sock_ioctl+0x1c6/0x1ea [<812cc78b>] ? might_fault+0x20/0x20 [<810b1ebb>] do_vfs_ioctl+0x46e/0x4a2 [<810a6ebb>] ? fget_light+0x2f/0x70 [<812ce549>] ? sys_recvmsg+0x3e/0x48 [<810b1f35>] sys_ioctl+0x46/0x69 [<8137fa77>] sysenter_do_call+0x12/0x2 Cc: <stable@vger.kernel.org> Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Abhijit Pradhan <abhijit@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: timeout a single frame in the rx reorder bufferEliad Peller2012-02-011-1/+1
| | | | | | | | | | | The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: <stable@vger.kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: set bss_conf.idle when vif is connectedEliad Peller2012-01-241-0/+1
| | | | | | | | | | | | | | | | __ieee80211_recalc_idle() iterates through the vifs, sets bss_conf.idle = true if they are disconnected, and increases "count" if they are not (which later gets evaluated in order to determine whether the device is idle). However, the loop doesn't set bss_conf.idle = false (along with increasing "count"), causing the device idle state and the vif idle state to get out of sync in some cases. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: update oper_channel on ibss joinEliad Peller2012-01-241-0/+1
| | | | | | | | | | Commit 13c40c5 ("mac80211: Add HT operation modes for IBSS") broke ibss operation by mistakenly removing the local->oper_channel update (causing ibss to start on the wrong channel). fix it. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix work removal on deauth requestJohannes Berg2012-01-181-11/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When deauth is requested while an auth or assoc work item is in progress, we currently delete it without regard for any state it might need to clean up. Fix it by cleaning up for those items. In the case Pontus found, the problem manifested itself as such: authenticate with 00:23:69:aa:dd:7b (try 1) authenticated failed to insert Dummy STA entry for the AP (error -17) deauthenticating from 00:23:69:aa:dd:7b by local choice (reason=2) It could also happen differently if the driver uses the tx_sync callback. We can't just call the ->done() method of the work items because that will lock up due to the locking in cfg80211. This fix isn't very clean, but that seems acceptable since I have patches pending to remove this code completely. Cc: stable@vger.kernel.org Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Tested-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Use the right headroom size for mesh mgmt framesJavier Cardona2012-01-182-6/+6
| | | | | | | | | | | | | | | | Use local->tx_headroom instad of local->hw.extra_tx_headroom. local->tx_headroom is the max of hw.extra_tx_headroom required by the driver and the headroom required by mac80211 for status reporting. On drivers where hw.extra_tx_headroom is smaller than what mac80211 requires (e.g. ath5k), we would not reserve sufficient buffer space to report tx status. Also, don't reserve local->tx_headroom + local->hw.extra_tx_headroom. Reported-by: Simon Morgenthaler <s.morgenthaler@students.unibe.ch> Reported-by: Kai Scharwies <kai@scharwies.de> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix debugfs key->station symlinkJohannes Berg2012-01-181-3/+4
| | | | | | | | Since stations moved into a virtual interface subdirectory, this link has been broken. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix possible race between sta_unblock and network softirqHelmut Schaa2012-01-171-2/+4
| | | | | | | | | All other code paths in sta_unblock synchronize with the network softirq by using local_bh_disable/enable. Do the same around ieee80211_sta_ps_deliver_wakeup. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix tx->skb NULL pointer dereferenceYoni Divinsky2012-01-163-9/+22
| | | | | | | | | | In function ieee80211_tx_h_encrypt the var info was initialized from tx->skb, since the fucntion is called after the function ieee80211_tx_h_fragment tx->skb is not valid anymore. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Net, mac80211: Fix resource leak in ieee80211_rx_h_mesh_fwding()Jesper Juhl2012-01-161-0/+1
| | | | | | | | | | | | | | We may leak the 'fwd_skb' we skb_copy() in ieee80211_rx_h_mesh_fwding() if we take the 'else' branch in the 'if' statement just below. If we take that branch we'll end up returning from the function and since we've not assigned 'fwd_skb' to anything at that point, we leak it when the variable goes out of scope. The simple fix seems to be to just kfree_skb(fwd_skb); just before we return. That is what this patch does. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix no-op authorized transitionsJohannes Berg2012-01-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | When userspace attempts to authorize a station that is already authorized, nothing happens as you'd expect. Similarly, when it unauthorizes a station that is associated, nothing happens. However, when it unauthorizes a station that isn't even associated yet, we erroneously try to move the station to associated. This seems to happen occasionally as a result of a race when wpa_supplicant attempts to unauthorize the port in managed mode. Particularly with my new patches to keep stations, it can then move a station into ASSOCIATED state before we have really associated, which is really confusing. I introduced this bug in "mac80211: refactor station state transitions" Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: reintroduce missing rcu_assign_pointer() callsEric Dumazet2012-01-124-7/+7
| | | | | | | | | | | | | | commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: fix rx->key NULL pointer dereference in promiscuous modeStanislaw Gruszka2012-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since: commit 816c04fe7ef01dd9649f5ccfe796474db8708be5 Author: Christian Lamparter <chunkeey@googlemail.com> Date: Sat Apr 30 15:24:30 2011 +0200 mac80211: consolidate MIC failure report handling is possible to that we dereference rx->key == NULL when driver set RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in promiscuous mode. This happen with rt73usb and rt61pci at least. Before the commit we always check rx->key against NULL, so I assume fix should be done in mac80211 (also mic_fail path has similar check). References: https://bugzilla.redhat.com/show_bug.cgi?id=769766 http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.html Cc: stable@vger.kernel.org # 3.0+ Reported-by: Stuart D Gathman <stuart@gathman.org> Reported-by: Kai Wohlfahrt <kai.scorpio@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2012-01-057-52/+19
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
| * mac80211: remove dead codeMohammed Shafi Shajakhan2012-01-042-19/+0
| | | | | | | | | | | | | | | | | | ieee80211_offchannel_enable_all_ps function is no longer used and looks like its logic is extensively handled in ieee80211_offchannel_stop_vifs Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Call driver commands after drv_start in mac80211 restart codeYogesh Ashok Powar2012-01-041-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Ideally, hardware/firmware initialization is complete after the drv_start routine. In mac80211 restart code (ieee80211_reconfig), defer calling the driver commands i.e. setup fragmentation threshold, rts threshold and coverage class till drv_start routine is called. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> v2: Removed extra blank line added. Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: use RCU read locks for sta_info_getMohammed Shafi Shajakhan2012-01-041-0/+2
| | | | | | | | | | | | | | | | | | this is being recently introduced by the commit a85e1d55974646a442d95911e3f7d7a891ea9ac5 Cc: Paul Stewart <pstew@google.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix kernel panic in IBSS due to a regressionMohammed Shafi Shajakhan2012-01-041-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kernel panic occurs when we create an IBSS mode and leave it for sometime without any joiner and this is introduced by the commit ec2b774e7c91094d8c00de579646f1162b87b01e where we don't put proper braces for 'list_for_each_entry_safe' and we pass an invalid 'sta' pointer to __sta_info_destroy EIP is at __list_add+0xe/0xa0 EAX: f3b63db4 EBX: 00000000 ECX: eab88c1c EDX: 00000000 ESI: 00000000 EDI: 00000246 EBP: f3b63d80 ESP: f3b63d58 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 198, ti=f3b62000 task=f3afbea0 task.ti=f3b62000) Stack: 00000000 00000000 f9ef9821 00000000 00000000 eab88c30 f3b63d80 c017f623 eab88bf0 eab88bf0 f3b63dd0 c066f925 00000000 00000002 00000000 f9ef9821 f3b63da0 c0180a2b eab88c1c eab88c30 00000002 f3afbea0 eab88bf4 f3b63db4 Call Trace: [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c017f623>] ? debug_mutex_add_waiter+0x23/0x60 [<c066f925>] __mutex_lock_common+0xd5/0x390 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c0180a2b>] ? trace_hardirqs_off+0xb/0x10 [<c066fd37>] mutex_lock_nested+0x47/0x60 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef9821>] __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef8989>] ieee80211_sta_tear_down_BA_sessions+0x39/0x60 [mac80211] [<f9ef1a67>] __sta_info_destroy+0x57/0x780 [mac80211] [<f9ef2223>] ieee80211_sta_expire+0x93/0xb0 [mac80211] [<f9efc8f6>] ieee80211_ibss_work+0x2d6/0x530 [mac80211] Cc: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix scan state machineMohammed Shafi Shajakhan2012-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | when we run high bandwidth UDP traffic and we trigger a scan, the scan state machine seems to be looping in SUSPEND->RESUME->DECISION->SUSPEND and SET_CHANNEL seems to be never called as 'tx_empty' is never true while running UDP traffic. fix this by settting SET_CHANNEL state when we get into RESUME state. Cc: Leela Kella <leela@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: always clear SDATA_STATE_OFFCHANNEL flagEliad Peller2012-01-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | If the vif is stopped while it is offchannel (e.g. right after p2p negotiation) the SDATA_STATE_OFFCHANNEL flag is never get cleared, resulting in various bad effects (e.g. GO can't start beaconing). Fix it by clearing the SDATA_STATE_OFFCHANNEL flag even if the vif is stopped. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Remove superfluous ieee80211_rx_h_remove_qos_controlHelmut Schaa2012-01-041-20/+0
| | | | | | | | | | | | | | | | | | | | This seems to not serve any purpose anymore, at least all frame processing afterwards seems to be able to deal with QoS frames. So, let's save the expensive memmove and just leave the QoS header in the 802.11 frame for further processing. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2012-01-036-5/+111
|\ \ | |/ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
| * mac80211: Keep skb->piority for relayed frames in AP modeHelmut Schaa2011-12-211-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When mac80211 relays a frame from STA1 to STA2 in AP mode it will get re-classified in the tx path. Unfortunately the frame protocol field is always set to ETH_P_8023 while the classification only kicks in for ETH_P_IP. Hence, a high priority frame from STA1 will be send to STA2 as best effort. Instead of running classification on the frame just use the same priority as STA1 did. Do this by adding 256 to the skb->priority to allow cfg80211_classify8021d to shortcut frame classification. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: ibss should not purge clients it is not responsible forMarek Lindner2011-12-211-0/+3
| | | | | | | | | | | | | | | | | | | | The IBSS merge code calls ieee80211_sta_expire() with a relatively short expire timeout that purges other clients prematurely. The expire function has to check that only the clients belonging to the vif in question are purged. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Fixing sparse warning at sta_info.cYogesh Ashok Powar2011-12-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 42624d4913a00219a8fdbb4bafd634d1d843be85 created following sparse warning >net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces) >net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx >net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident> Making use of rcu_dereference_protected to fix the problem. V2: - Replacing rcu_dereference with rcu_dereference_protected as suggested by Johannes. - Adding mutex_lock/unlock to satisfy the condition at rcu_dereference_protected Cc: Nishant Sarmukadam <nishants@marvell.com> Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: handle SMPS action framesJohannes Berg2011-12-191-0/+58
| | | | | | | | | | | | | | | | | | | | When a peer changes SMPS state we should update rate control so it doesn't have to detect it by itself. It can't detect "dynamic" mode anyway since that just requires rts-cts handshaking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * cfg80211: Return beacon loss count in stationPaul Stewart2011-12-193-1/+13
| | | | | | | | | | | | | | | | If station info contains a beacon loss count, return it to userspace. Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: split addba retries in timeNikolay Martynov2011-12-192-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently code allows three (HT_AGG_MAX_RETRIES) unanswered addba requests. When this limit is reached aggregation is turned off for given TID permanently. This doesn't seem right: three requests is not that much, some 'blackout' can happen, but effect of it affects whole connection indefinitely. This patch increases number of retries to 15. Also, when there have been 3 or more retries it splits further retries apart by 15 seconds instead of sending them in very short period of time. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | net: fix assignment of 0/1 to bool variables.Rusty Russell2011-12-192-3/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: Fix power save in change interfaceMohammed Shafi Shajakhan2011-12-151-0/+1
| | | | | | | | | | we found that power save is not getting enabled when we do change interface in this order STA->IBSS->STA. this is because ieee80211_setup_sdata clears type-dependent union Reported-by: Leela Kella <leela@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove an unnecessary paraenthesisMohammed Shafi Shajakhan2011-12-151-1/+1
| | | | | Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA framesHelmut Schaa2011-12-154-8/+17
| | | | | | | | | | | | | Currently BAR, ADDBA and DELBA frames are always sent using AC_VO. If the TID for which a BA session is established is assigned to a different queue BAR, ADDBA and DELBA frames can "overtake" frames of the according BA session. Hence, always put BA session related frames into the same queue as the BA sessions data frames. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: reduce station management complexityJohannes Berg2011-12-153-203/+63
| | | | | | | | | | | | | Now that IBSS no longer needs to insert stations from atomic context, we can get rid of all the special cases for that, and even get rid of the sta_lock (though it needs to stay as tim_lock.) This makes the station management code much more straight-forward. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: delay IBSS station insertionJohannes Berg2011-12-154-57/+140
| | | | | | | | | | | | | | | In order to notify drivers and simplify the station management code, defer IBSS station insertion to a work item and don't do it directly while receiving a frame. This increases the complexity in IBSS a little bit, but it's pretty straight forward and it allows us to reduce the station management complexity (next patch) considerably. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make address arguments to sta_info_alloc constJohannes Berg2011-12-152-2/+2
| | | | | | | No real changes, just note that they are const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: count authorized stations per BSSJohannes Berg2011-12-154-16/+20
| | | | | | | | | | | | | | Currently, each AP interface will send multicast traffic if any interface has a station entry even if that station entry is allocated only. With the new station state management we can easily fix it by adding a counter that counts each authorized station only and send multicast traffic only when the correct interface has at least one authorized station. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: refactor station state transitionsJohannes Berg2011-12-158-30/+172
| | | | | | | | | | | | | | | | | | | | | | | | Station entries can have various states, the most important ones being auth, assoc and authorized. This patch prepares us for telling the driver about these states, we don't want to confuse drivers with strange transitions, so with this we enforce that they move in the right order between them (back and forth); some transitions might happen before the driver even knows about the station, but at least runtime transitions will be ordered correctly. As a consequence, IBSS and MESH stations will now have the ASSOC flag set (so they can transition to AUTHORIZED), and we can get rid of a special case in TX processing. When freeing a station, unwind the state so that other parts of the code (or drivers later) can rely on the transitions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use station mutex in configurationJohannes Berg2011-12-151-6/+6
| | | | | | | | | There's no need to use RCU here, we can just lock the station mutex instead. This allows the code to sleep, which is necessary for later patches. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove duplicate TDLS peer verificationJohannes Berg2011-12-151-14/+0
| | | | | | | | This is already checked in cfg80211, so no need to repeat the checks here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: validate nl80211 station handling betterJohannes Berg2011-12-151-0/+8
| | | | | | | | | | | | | | The nl80211 station handling code is a bit messy and doesn't do a lot of validation. It seems like this could be an issue for drivers that don't use mac80211 to validate everything. As cfg80211 doesn't keep station state, move the validation of allowing supported_rates to change for TDLS only in station mode to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: free skb on error path of ieee80211_ibss_join()Simon Wunderlich2011-12-141-0/+1
| | | | | | | | Our new return also created a memleak. The skb should be freed before returning an error. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2011-12-141-45/+41
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
| * mac80211: fix another race in aggregation startJohannes Berg2011-12-071-45/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emmanuel noticed that when mac80211 stops the queues for aggregation that can leave a packet pending. This packet will be given to the driver after the AMPDU callback, but as a non-aggregated packet which messes up the sequence number etc. I also noticed by looking at the code that if packets are being processed while we clear the WANT_START bit, they might see it cleared already and queue up on tid_tx->pending. If the driver then rejects the new aggregation session we leak the packet. Fix both of these issues by changing this code to not stop the queues at all. Instead, let packets queue up on the tid_tx->pending queue instead of letting them get to the driver, and add code to recover properly in case the driver rejects the session. (The patch looks large because it has to move two functions to before their new use.) Cc: stable@vger.kernel.org Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: don't check sdata_running in vif notifierEliad Peller2011-12-131-4/+1
| | | | | | | | | | | | | | | | | | | | | | The ip address of the vif can be set even before the vif is up. requiring the vif to be up in the vif notifier makes the notifer ignore this event, which causes wrong arp filter configuration later on. Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: configure BSS_CHANGED_ARP_FILTER on reconfigurationEliad Peller2011-12-131-1/+2
| | | | | | | | | | | | | | Configure arp filtering on sta reconfiguration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: Do not request FIF_BCN_PRBRESP_PROMISC for HW scan.Dmitry TARNYAGIN2011-12-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ieee80211_configure_filter code used local->scanning as a boolean value when it was a bit mask. Bits SCAN_COMPLETED, SCAN_ABORTED should not set FIF_BCN_PRBRESP_PROMISC filter. SCAN_HW_SCANNING should not set FIF_BCN_PRBRESP_PROMISC either, as there is no explicit filter configuration request from scan code. If a driver requires FIF_BCN_PRBRESP_PROMISC mode during HW scanning, it's up to the driver to temporary enable it. Similar mistake was fixed also in ieee80211_hw_config (power configuration code). Verified-by: Vitaly Wool <vitaly.wool@sonyericsson.com> Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud