summaryrefslogtreecommitdiffstats
path: root/net/ipv6
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-06-165-7/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
| * ipv6: Only emit append events for appended routesIdo Schimmel2018-06-151-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code will emit an append event in the FIB notification chain for any route added with NLM_F_APPEND set, even if the route was not appended to any existing route. This is inconsistent with IPv4 where such an event is only emitted when the new route is appended after an existing one. Align IPv6 behavior with IPv4, thereby allowing listeners to more easily handle these events. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tcp: verify the checksum of the first data segment in a new connectionFrank van der Linden2018-06-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/ipv6: Ensure cfg is properly initialized in ipv6_create_tempaddrDavid Ahern2018-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Valdis reported a BUG in ipv6_add_addr: [ 1820.832682] BUG: unable to handle kernel NULL pointer dereference at 0000000000000209 [ 1820.832728] RIP: 0010:ipv6_add_addr+0x280/0xd10 [ 1820.832732] Code: 49 8b 1f 0f 84 6a 0a 00 00 48 85 db 0f 84 4e 0a 00 00 48 8b 03 48 8b 53 08 49 89 45 00 49 8b 47 10 49 89 55 08 48 85 c0 74 15 <48> 8b 50 08 48 8b 00 49 89 95 b8 01 00 00 49 89 85 b0 01 00 00 4c [ 1820.832847] RSP: 0018:ffffaa07c2fd7880 EFLAGS: 00010202 [ 1820.832853] RAX: 0000000000000201 RBX: ffffaa07c2fd79b0 RCX: 0000000000000000 [ 1820.832858] RDX: a4cfbfba2cbfa64c RSI: 0000000000000000 RDI: ffffffff8a8e9fa0 [ 1820.832862] RBP: ffffaa07c2fd7920 R08: 000000000000017a R09: ffffffff8a555300 [ 1820.832866] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888d18e71c00 [ 1820.832871] R13: ffff888d0a9b1200 R14: 0000000000000000 R15: ffffaa07c2fd7980 [ 1820.832876] FS: 00007faa51bdb800(0000) GS:ffff888d1d400000(0000) knlGS:0000000000000000 [ 1820.832880] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1820.832885] CR2: 0000000000000209 CR3: 000000021e8f8001 CR4: 00000000001606e0 [ 1820.832888] Call Trace: [ 1820.832898] ? __local_bh_enable_ip+0x119/0x260 [ 1820.832904] ? ipv6_create_tempaddr+0x259/0x5a0 [ 1820.832912] ? __local_bh_enable_ip+0x139/0x260 [ 1820.832921] ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832926] ? ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832941] manage_tempaddrs+0x1a5/0x240 [ 1820.832951] inet6_addr_del+0x20b/0x3b0 [ 1820.832959] ? nla_parse+0xce/0x1e0 [ 1820.832968] inet6_rtm_deladdr+0xd9/0x210 [ 1820.832981] rtnetlink_rcv_msg+0x1d4/0x5f0 Looking at the code I found 1 element (peer_pfx) of the newly introduced ifa6_config struct that is not initialized. Use a memset rather than hard coding an init for each struct element. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Fixes: e6464b8c63619 ("net/ipv6: Convert ipv6_add_addr to struct ifa6_config") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2018-06-111-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Reject non-null terminated helper names from xt_CT, from Gao Feng. 2) Fix KASAN splat due to out-of-bound access from commit phase, from Alexey Kodanev. 3) Missing conntrack hook registration on IPVS FTP helper, from Julian Anastasov. 4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo. 5) Fix inverted check on packet xmit to non-local addresses, also from Julian. 6) Fix ebtables alignment compat problems, from Alin Nastac. 7) Hook mask checks are not correct in xt_set, from Serhey Popovych. 8) Fix timeout listing of element in ipsets, from Jozsef. 9) Cap maximum timeout value in ipset, also from Jozsef. 10) Don't allow family option for hash:mac sets, from Florent Fourcot. 11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this Florian. 12) Another bug reported by KASAN in the rbtree set backend, from Taehee Yoo. 13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT. From Gao Feng. 14) Missing initialization of match/target in ebtables, from Florian Westphal. 15) Remove useless nft_dup.h file in include path, from C. Labbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * netfilter: x_tables: initialise match/target check parameter structFlorian Westphal2018-06-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot reports following splat: BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline] ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline] The uninitialised access is xt_mtchk_param->nft_compat ... which should be set to 0. Fix it by zeroing the struct beforehand, same for tgchk. ip(6)tables targetinfo uses c99-style initialiser, so no change needed there. Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | ipv6: allow PMTU exceptions to local routesJulian Anastasov2018-06-111-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by: Martin KaFai Lau <kafai@fb.com> Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff31ebf0 ("ipv6: Don't create clones of host routes.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | treewide: kvmalloc() -> kvmalloc_array()Kees Cook2018-06-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This patch replaces cases of: kvmalloc(a * b, gfp) with: kvmalloc_array(a * b, gfp) as well as handling cases of: kvmalloc(a * b * c, gfp) with: kvmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(char) * COUNT + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvmalloc + kvmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvmalloc(C1 * C2 * C3, ...) | kvmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvmalloc(sizeof(THING) * C2, ...) | kvmalloc(sizeof(TYPE) * C2, ...) | kvmalloc(C1 * C2 * C3, ...) | kvmalloc(C1 * C2, ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* | | treewide: kzalloc() -> kcalloc()Kees Cook2018-06-121-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* | udp: fix rx queue len reported by diag and proc interfacePaolo Abeni2018-06-082-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 6b229cf77d68 ("udp: add batching to udp_rmem_release()") the sk_rmem_alloc field does not measure exactly anymore the receive queue length, because we batch the rmem release. The issue is really apparent only after commit 0d4a6608f68c ("udp: do rmem bulk free even if the rx sk queue is empty"): the user space can easily check for an empty socket with not-0 queue length reported by the 'ss' tool or the procfs interface. We need to use a custom UDP helper to report the correct queue length, taking into account the forward allocation deficit. Reported-by: trevor.francis@46labs.com Fixes: 6b229cf77d68 ("UDP: add batching to udp_rmem_release()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2018-06-0642-2083/+2771
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
| * \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-06-051-0/+24
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2018-06-05 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add a new BPF hook for sendmsg similar to existing hooks for bind and connect: "This allows to override source IP (including the case when it's set via cmsg(3)) and destination IP:port for unconnected UDP (slow path). TCP and connected UDP (fast path) are not affected. This makes UDP support complete, that is, connected UDP is handled by connect hooks, unconnected by sendmsg ones.", from Andrey. 2) Rework of the AF_XDP API to allow extending it in future for type writer model if necessary. In this mode a memory window is passed to hardware and multiple frames might be filled into that window instead of just one that is the case in the current fixed frame-size model. With the new changes made this can be supported without having to add a new descriptor format. Also, core bits for the zero-copy support for AF_XDP have been merged as agreed upon, where i40e bits will be routed via Jeff later on. Various improvements to documentation and sample programs included as well, all from Björn and Magnus. 3) Given BPF's flexibility, a new program type has been added to implement infrared decoders. Quote: "The kernel IR decoders support the most widely used IR protocols, but there are many protocols which are not supported. [...] There is a 'long tail' of unsupported IR protocols, for which lircd is need to decode the IR. IR encoding is done in such a way that some simple circuit can decode it; therefore, BPF is ideal. [...] user-space can define a decoder in BPF, attach it to the rc device through the lirc chardev.", from Sean. 4) Several improvements and fixes to BPF core, among others, dumping map and prog IDs into fdinfo which is a straight forward way to correlate BPF objects used by applications, removing an indirect call and therefore retpoline in all map lookup/update/delete calls by invoking the callback directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper for tc BPF programs to have an efficient way of looking up cgroup v2 id for policy or other use cases. Fixes to make sure we zero tunnel/xfrm state that hasn't been filled, to allow context access wrt pt_regs in 32 bit archs for tracing, and last but not least various test cases for fixes that landed in bpf earlier, from Daniel. 5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper. 6) Add a new bpf_get_current_cgroup_id() helper that can be used in tracing to retrieve the cgroup id from the current process in order to allow for e.g. aggregation of container-level events, from Yonghong. 7) Two follow-up fixes for BTF to reject invalid input values and related to that also two test cases for BPF kselftests, from Martin. 8) Various API improvements to the bpf_fib_lookup() helper, that is, dropping MPLS bits which are not fully hashed out yet, rejecting invalid helper flags, returning error for unsupported address families as well as renaming flowlabel to flowinfo, from David. 9) Various fixes and improvements to sockmap BPF kselftests in particular in proper error detection and data verification, from Prashant. 10) Two arm32 BPF JIT improvements. One is to fix imm range check with regards to whether immediate fits into 24 bits, and a naming cleanup to get functions related to rsh handling consistent to those handling lsh, from Wang. 11) Two compile warning fixes in BPF, one for BTF and a false positive to silent gcc in stack_map_get_build_id_offset(), from Arnd. 12) Add missing seg6.h header into tools include infrastructure in order to fix compilation of BPF kselftests, from Mathieu. 13) Several formatting cleanups in the BPF UAPI helper description that also fix an error during rst2man compilation, from Quentin. 14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is not built into the kernel, from Yue. 15) Remove a useless double assignment in dev_map_enqueue(), from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bpf: Hooks for sys_sendmsgAndrey Ignatov2018-05-281-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | | ipmr: fix error path when ipmr_new_table failsSabrina Dubroca2018-06-051-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") refactored ipmr_new_table, so that it now returns NULL when mr_table_alloc fails. Unfortunately, all callers of ipmr_new_table expect an ERR_PTR. This can result in NULL deref, for example when ipmr_rules_exit calls ipmr_free_table with NULL net->ipv4.mrt in the !CONFIG_IP_MROUTE_MULTIPLE_TABLES version. This patch makes mr_table_alloc return errors, and changes ip6mr_new_table and its callers to return/expect error pointers as well. It also removes the version of mr_table_alloc defined under !CONFIG_IP_MROUTE_COMMON, since it is never used. Fixes: 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeedsSabrina Dubroca2018-06-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same setsockopt will fail with -ENOENT, since we haven't actually created that table. A similar fix for ipv4 was included in commit 5e1859fbcc3c ("ipv4: ipmr: various fixes and cleanups"). Fixes: d1db275dd3f6 ("ipv6: ip6mr: support multiple tables") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | netfilter: provide udp*_lib_lookup for nf_tproxyArnd Bergmann2018-06-051-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is now possible to enable the libified nf_tproxy modules without also enabling NETFILTER_XT_TARGET_TPROXY, which throws off the ifdef logic in the udp core code: net/ipv6/netfilter/nf_tproxy_ipv6.o: In function `nf_tproxy_get_sock_v6': nf_tproxy_ipv6.c:(.text+0x1a8): undefined reference to `udp6_lib_lookup' net/ipv4/netfilter/nf_tproxy_ipv4.o: In function `nf_tproxy_get_sock_v4': nf_tproxy_ipv4.c:(.text+0x3d0): undefined reference to `udp4_lib_lookup' We can actually simplify the conditions now to provide the two functions exactly when they are needed. Fixes: 45ca4e0cf273 ("netfilter: Libify xt_TPROXY") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: ipv6: Generate random IID for addresses on RAWIP devicesSubash Abhinov Kasiviswanathan2018-06-051-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RAWIP devices such as rmnet do not have a hardware address and instead require the kernel to generate a random IID for the IPv6 addresses. Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net/ipv6: prevent use after free in ip6_route_mpath_notifyDavid Ahern2018-06-051-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot reported a use-after-free: BUG: KASAN: use-after-free in ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 Read of size 4 at addr ffff8801bf789cf0 by task syz-executor756/4555 CPU: 1 PID: 4555 Comm: syz-executor756 Not tainted 4.17.0-rc7+ #78 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 ip6_route_multipath_add+0x615/0x1910 net/ipv6/route.c:4303 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Allocated by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 dst_alloc+0xbb/0x1d0 net/core/dst.c:104 __ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:361 ip6_dst_alloc+0x29/0xb0 net/ipv6/route.c:376 ip6_route_info_create+0x4d4/0x3a30 net/ipv6/route.c:2834 ip6_route_multipath_add+0xc7e/0x1910 net/ipv6/route.c:4240 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Freed by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 dst_destroy+0x267/0x3c0 net/core/dst.c:140 dst_release_immediate+0x71/0x9e net/core/dst.c:205 fib6_add+0xa40/0x1650 net/ipv6/ip6_fib.c:1305 __ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011 ip6_route_multipath_add+0x513/0x1910 net/ipv6/route.c:4267 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... The problem is that rt_last can point to a deleted route if the insert fails. One reproducer is to insert a route and then add a multipath route that has a duplicate nexthop.e.g,: $ ip -6 ro add vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::2 $ ip -6 ro append vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::4 nexthop via 2001:db8:1::2 Fix by not setting rt_last until the it is verified the insert succeeded. Fixes: 3b1137fe7482 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH") Cc: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ipv6: omit traffic class when calculating flow hashMichal Kubecek2018-06-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the code paths calculating flow hash for IPv6 use flowlabel member of struct flowi6 which, despite its name, encodes both flow label and traffic class. If traffic class changes within a TCP connection (as e.g. ssh does), ECMP route can switch between path. It's also inconsistent with other code paths where ip6_flowlabel() (returning only flow label) is used to feed the key. Use only flow label everywhere, including one place where hash key is set using ip6_flowinfo(). Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Fixes: f70ea018da06 ("net: Add functions to get skb->hash based on flow structures") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Revert "ipv6: omit traffic class when calculating flow hash"David S. Miller2018-06-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 87ae68c8b4944d142447b88875c9c412c714434f. Applied the wrong version of this fix, correct version coming up. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ipv6: omit traffic class when calculating flow hashMichal Kubecek2018-06-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the code paths calculating flow hash for IPv6 use flowlabel member of struct flowi6 which, despite its name, encodes both flow label and traffic class. If traffic class changes within a TCP connection (as e.g. ssh does), ECMP route can switch between path. It's also incosistent with other code paths where ip6_flowlabel() (returning only flow label) is used to feed the key. Use only flow label everywhere, including one place where hash key is set using ip6_flowinfo(). Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Fixes: f70ea018da06 ("net: Add functions to get skb->hash based on flow structures") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | vrf: check the original netdevice for generating redirectStephen Suryaputra2018-06-042-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the right device to determine if redirect should be sent especially when using vrf. Same as well as when sending the redirect. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-06-034-8/+14
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | netfilter: Libify xt_TPROXYMáté Eckl2018-06-033-1/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extracted functions will likely be usefull to implement tproxy support in nf_tables. Extrancted functions: - nf_tproxy_sk_is_transparent - nf_tproxy_laddr4 - nf_tproxy_handle_time_wait4 - nf_tproxy_get_sock_v4 - nf_tproxy_laddr6 - nf_tproxy_handle_time_wait6 - nf_tproxy_get_sock_v6 (nf_)tproxy_handle_time_wait6 also needed some refactor as its current implementation was xtables-specific. Signed-off-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2018-06-023-9/+2
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, the most relevant things in this batch are: 1) Compile masquerade infrastructure into NAT module, from Florian Westphal. Same thing with the redirection support. 2) Abort transaction if early initialization of the commit phase fails. Also from Florian. 3) Get rid of synchronize_rcu() by using rule array in nf_tables, from Florian. 4) Abort nf_tables batch if fatal signal is pending, from Florian. 5) Use .call_rcu nfnetlink from nf_tables to make dumps fully lockless. From Florian Westphal. 6) Support to match transparent sockets from nf_tables, from Máté Eckl. 7) Audit support for nf_tables, from Phil Sutter. 8) Validate chain dependencies from commit phase, fall back to fine grain validation only in case of errors. 9) Attach dst to skbuff from netfilter flowtable packet path, from Jason A. Donenfeld. 10) Use artificial maximum attribute cap to remove VLA from nfnetlink. Patch from Kees Cook. 11) Add extension to allow to forward packets through neighbour layer. 12) Add IPv6 conntrack helper support to IPVS, from Julian Anastasov. 13) Add IPv6 FTP conntrack support to IPVS, from Julian Anastasov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | netfilter: nat: merge ipv4/ipv6 masquerade code into main nat moduleFlorian Westphal2018-05-293-9/+2
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using extra modules for these, turn the config options into an implicit dependency that adds masq feature to the protocol specific nf_nat module. before: text data bss dec hex filename 2001 860 4 2865 b31 net/ipv4/netfilter/nf_nat_masquerade_ipv4.ko 5579 780 2 6361 18d9 net/ipv4/netfilter/nf_nat_ipv4.ko 2860 836 8 3704 e78 net/ipv6/netfilter/nf_nat_masquerade_ipv6.ko 6648 780 2 7430 1d06 net/ipv6/netfilter/nf_nat_ipv6.ko after: text data bss dec hex filename 7245 872 8 8125 1fbd net/ipv4/netfilter/nf_nat_ipv4.ko 9165 848 12 10025 2729 net/ipv6/netfilter/nf_nat_ipv6.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | | | tcp: minor optimization around tcp_hdr() usage in receive pathYafang Shao2018-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is additional to the commit ea1627c20c34 ("tcp: minor optimizations around tcp_hdr() usage"). At this point, skb->data is same with tcp_hdr() as tcp header has not been pulled yet. So use the less expensive one to get the tcp header. Remove the third parameter of tcp_rcv_established() and put it into the function body. Furthermore, the local variables are listed as a reverse christmas tree :) Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net/ipv6: Add support for specifying metric of connected routesDavid Ahern2018-05-291-18/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for IFA_RT_PRIORITY to ipv6 addresses. If the metric is changed on an existing address then the new route is inserted before removing the old one. Since the metric is one of the route keys, the prefix route can not be atomically replaced. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net/ipv6: Pass ifa6_config struct to inet6_addr_modifyDavid Ahern2018-05-291-21/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update inet6_addr_modify to take ifa6_config argument versus a parameter list. This is an argument move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net/ipv6: Pass ifa6_config struct to inet6_addr_addDavid Ahern2018-05-291-55/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the creation of struct ifa6_config up to callers of inet6_addr_add. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net/ipv6: Convert ipv6_add_addr to struct ifa6_configDavid Ahern2018-05-291-59/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move config parameters for adding an ipv6 address to a struct. struct names stem from inet6_rtm_newaddr which is the modern handler for adding an address. Start the conversion to ifa6_config with ipv6_add_addr. This is an argument move only; no functional change intended. Mapping of variable changes: addr --> cfg->pfx peer_addr --> cfg->peer_pfx pfxlen --> cfg->plen flags --> cfg->ifa_flags scope, valid_lft, prefered_lft have the same names within cfg (with corrected spelling). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: remove unnecessary genlmsg_cancel() callsYueHaibing2018-05-291-1/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the message be freed immediately, no need to trim it back to the previous size. Inspired by commit 7a9b3ec1e19f ("nl80211: remove unnecessary genlmsg_cancel() calls") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net/ipv6: Udate fib6_table_lookup tracepointDavid Ahern2018-05-241-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bb0ad1987e96 ("ipv6: fib6_rules: support for match on sport, dport and ip proto") added support for protocol and ports to FIB rules. Update the FIB lookup tracepoint to dump the parameters. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-05-245-11/+241
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-05-24 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc). 2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers. 3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit. 4) Jiong Wang adds support for indirect and arithmetic shifts to NFP 5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible. 6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions. 7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT. 8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events. 9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | ipv6: sr: Add seg6local action End.BPFMathieu Xhonneux2018-05-241-2/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the End.BPF action to the LWT seg6local infrastructure. This action works like any other seg6local End action, meaning that an IPv6 header with SRH is needed, whose DA has to be equal to the SID of the action. It will also advance the SRH to the next segment, the BPF program does not have to take care of this. Since the BPF program may not be a source of instability in the kernel, it is important to ensure that the integrity of the packet is maintained before yielding it back to the IPv6 layer. The hook hence keeps track if the SRH has been altered through the helpers, and re-validates its content if needed with seg6_validate_srh. The state kept for validation is stored in a per-CPU buffer. The BPF program is not allowed to directly write into the packet, and only some fields of the SRH can be altered through the helper bpf_lwt_seg6_store_bytes. Performances profiling has shown that the SRH re-validation does not induce a significant overhead. If the altered SRH is deemed as invalid, the packet is dropped. This validation is also done before executing any action through bpf_lwt_seg6_action, and will not be performed again if the SRH is not modified after calling the action. The BPF program may return 3 types of return codes: - BPF_OK: the End.BPF action will look up the next destination through seg6_lookup_nexthop. - BPF_REDIRECT: if an action has been executed through the bpf_lwt_seg6_action helper, the BPF program should return this value, as the skb's destination is already set and the default lookup should not be performed. - BPF_DROP : the packet will be dropped. Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | bpf: Add IPv6 Segment Routing helpersMathieu Xhonneux2018-05-242-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BPF seg6local hook should be powerful enough to enable users to implement most of the use-cases one could think of. After some thinking, we figured out that the following actions should be possible on a SRv6 packet, requiring 3 specific helpers : - bpf_lwt_seg6_store_bytes: Modify non-sensitive fields of the SRH - bpf_lwt_seg6_adjust_srh: Allow to grow or shrink a SRH (to add/delete TLVs) - bpf_lwt_seg6_action: Apply some SRv6 network programming actions (specifically End.X, End.T, End.B6 and End.B6.Encap) The specifications of these helpers are provided in the patch (see include/uapi/linux/bpf.h). The non-sensitive fields of the SRH are the following : flags, tag and TLVs. The other fields can not be modified, to maintain the SRH integrity. Flags, tag and TLVs can easily be modified as their validity can be checked afterwards via seg6_validate_srh. It is not allowed to modify the segments directly. If one wants to add segments on the path, he should stack a new SRH using the End.B6 action via bpf_lwt_seg6_action. Growing, shrinking or editing TLVs via the helpers will flag the SRH as invalid, and it will have to be re-validated before re-entering the IPv6 layer. This flag is stored in a per-CPU buffer, along with the current header length in bytes. Storing the SRH len in bytes in the control block is mandatory when using bpf_lwt_seg6_adjust_srh. The Header Ext. Length field contains the SRH len rounded to 8 bytes (a padding TLV can be inserted to ensure the 8-bytes boundary). When adding/deleting TLVs within the BPF program, the SRH may temporary be in an invalid state where its length cannot be rounded to 8 bytes without remainder, hence the need to store the length in bytes separately. The caller of the BPF program can then ensure that the SRH's final length is valid using this value. Again, a final SRH modified by a BPF program which doesn’t respect the 8-bytes boundary will be discarded as it will be considered as invalid. Finally, a fourth helper is provided, bpf_lwt_push_encap, which is available from the LWT BPF IN hook, but not from the seg6local BPF one. This helper allows to encapsulate a Segment Routing Header (either with a new outer IPv6 header, or by inlining it directly in the existing IPv6 header) into a non-SRv6 packet. This helper is required if we want to offer the possibility to dynamically encapsulate a SRH for non-SRv6 packet, as the BPF seg6local hook only works on traffic already containing a SRH. This is the BPF equivalent of the seg6 LWT infrastructure, which achieves the same purpose but with a static SRH per route. These helpers require CONFIG_IPV6=y (and not =m). Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | ipv6: sr: export function lookup_nexthopMathieu Xhonneux2018-05-241-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function lookup_nexthop is essential to implement most of the seg6local actions. As we want to provide a BPF helper allowing to apply some of these actions on the packet being processed, the helper should be able to call this function, hence the need to make it public. Moreover, if one argument is incorrect or if the next hop can not be found, an error should be returned by the BPF helper so the BPF program can adapt its processing of the packet (return an error, properly force the drop, ...). This patch hence makes this function return dst->error to indicate a possible error. Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | | net/ipv6: Add helper to return path MTU based on fib resultDavid Ahern2018-05-223-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Determine path MTU from a FIB lookup result. Logic is based on ip6_dst_mtu_forward plus lookup of nexthop exception. Add ip6_dst_mtu_forward to ipv6_stubs to handle access by core bpf code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2018-05-235-154/+114
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Remove obsolete nf_log tracing from nf_tables, from Florian Westphal. 2) Add support for map lookups to numgen, random and hash expressions, from Laura Garcia. 3) Allow to register nat hooks for iptables and nftables at the same time. Patchset from Florian Westpha. 4) Timeout support for rbtree sets. 5) ip6_rpfilter works needs interface for link-local addresses, from Vincent Bernat. 6) Add nf_ct_hook and nf_nat_hook structures and use them. 7) Do not drop packets on packets raceing to insert conntrack entries into hashes, this is particularly a problem in nfqueue setups. 8) Address fallout from xt_osf separation to nf_osf, patches from Florian Westphal and Fernando Mancera. 9) Remove reference to struct nft_af_info, which doesn't exist anymore. From Taehee Yoo. This batch comes with is a conflict between 25fd386e0bc0 ("netfilter: core: add missing __rcu annotation") in your tree and 2c205dd3981f ("netfilter: add struct nf_nat_hook and use it") coming in this batch. This conflict can be solved by leaving the __rcu tag on __netfilter_net_init() - added by 25fd386e0bc0 - and remove all code related to nf_nat_decode_session_hook - which is gone after 2c205dd3981f, as described by: diff --cc net/netfilter/core.c index e0ae4aae96f5,206fb2c4c319..168af54db975 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@@ -611,7 -580,13 +611,8 @@@ const struct nf_conntrack_zone nf_ct_zo EXPORT_SYMBOL_GPL(nf_ct_zone_dflt); #endif /* CONFIG_NF_CONNTRACK */ - static void __net_init __netfilter_net_init(struct nf_hook_entries **e, int max) -#ifdef CONFIG_NF_NAT_NEEDED -void (*nf_nat_decode_session_hook)(struct sk_buff *, struct flowi *); -EXPORT_SYMBOL(nf_nat_decode_session_hook); -#endif - + static void __net_init + __netfilter_net_init(struct nf_hook_entries __rcu **e, int max) { int h; I can also merge your net-next tree into nf-next, solve the conflict and resend the pull request if you prefer so. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | netfilter: ip6t_rpfilter: provide input interface for route lookupVincent Bernat2018-05-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 47b7e7f82802, this bit was removed at the same time the RT6_LOOKUP_F_IFACE flag was removed. However, it is needed when link-local addresses are used, which is a very common case: when packets are routed, neighbor solicitations are done using link-local addresses. For example, the following neighbor solicitation is not matched by "-m rpfilter": IP6 fe80::5254:33ff:fe00:1 > ff02::1:ff00:3: ICMP6, neighbor solicitation, who has 2001:db8::5254:33ff:fe00:3, length 32 Commit 47b7e7f82802 doesn't quite explain why we shouldn't use RT6_LOOKUP_F_IFACE in the rpfilter case. I suppose the interface check later in the function would make it redundant. However, the remaining of the routing code is using RT6_LOOKUP_F_IFACE when there is no source address (which matches rpfilter's case with a non-unicast destination, like with neighbor solicitation). Signed-off-by: Vincent Bernat <vincent@bernat.im> Fixes: 47b7e7f82802 ("netfilter: don't set F_IFACE on ipv6 fib lookups") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * | | | netfilter: nf_nat: add nat type hooks to nat coreFlorian Westphal2018-05-233-112/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the packet rewrite and instantiation of nat NULL bindings happens from the protocol specific nat backend. Invocation occurs either via ip(6)table_nat or the nf_tables nat chain type. Invocation looks like this (simplified): NF_HOOK() | `---iptable_nat | `---> nf_nat_l3proto_ipv4 -> nf_nat_packet | new packet? pass skb though iptables nat chain | `---> iptable_nat: ipt_do_table In nft case, this looks the same (nft_chain_nat_ipv4 instead of iptable_nat). This is a problem for two reasons: 1. Can't use iptables nat and nf_tables nat at the same time, as the first user adds a nat binding (nf_nat_l3proto_ipv4 adds a NULL binding if do_table() did not find a matching nat rule so we can detect post-nat tuple collisions). 2. If you use e.g. nft_masq, snat, redir, etc. uses must also register an empty base chain so that the nat core gets called fro NF_HOOK() to do the reverse translation, which is neither obvious nor user friendly. After this change, the base hook gets registered not from iptable_nat or nftables nat hooks, but from the l3 nat core. iptables/nft nat base hooks get registered with the nat core instead: NF_HOOK() | `---> nf_nat_l3proto_ipv4 -> nf_nat_packet | new packet? pass skb through iptables/nftables nat chains | +-> iptables_nat: ipt_do_table +-> nft nat chain x `-> nft nat chain y The nat core deals with null bindings and reverse translation. When no mapping exists, it calls the registered nat lookup hooks until one creates a new mapping. If both iptables and nftables nat hooks exist, the first matching one is used (i.e., higher priority wins). Also, nft users do not need to create empty nat hooks anymore, nat core always registers the base hooks that take care of reverse/reply translation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * | | | netfilter: nf_tables: allow chain type to override hook registerFlorian Westphal2018-05-231-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Will be used in followup patch when nat types no longer use nf_register_net_hook() but will instead register with the nat core. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * | | | netfilter: xtables: allow table definitions not backed by hook_opsFlorian Westphal2018-05-231-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ip(6)tables nat table is currently receiving skbs from the netfilter core, after a followup patch skbs will be coming from the netfilter nat core instead, so the table is no longer backed by normal hook_ops. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| | * | | | netfilter: nf_nat: move common nat code to nat coreFlorian Westphal2018-05-231-46/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copy-pasted, both l3 helpers almost use same code here. Split out the common part into an 'inet' helper. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | | | | ipv6: support sport, dport and ip_proto in RTM_GETROUTERoopa Prabhu2018-05-231-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a followup to fib6 rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | udp: exclude gso from xfrm pathsWillem de Bruijn2018-05-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UDP GSO delays final datagram construction to the GSO layer. This conflicts with protocol transformations. Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net/ipv6: Simplify route replace and appending into multipath routeDavid Ahern2018-05-222-87/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring consistency to ipv6 route replace and append semantics. Remove rt6_qualify_for_ecmp which is just guess work. It fails in 2 cases: 1. can not replace a route with a reject route. Existing code appends a new route instead of replacing the existing one. 2. can not have a multipath route where a leg uses a dev only nexthop Existing use cases affected by this change: 1. adding a route with existing prefix and metric using NLM_F_CREATE without NLM_F_APPEND or NLM_F_EXCL (ie., what iproute2 calls 'prepend'). Existing code auto-determines that the new nexthop can be appended to an existing route to create a multipath route. This change breaks that by requiring the APPEND flag for the new route to be added to an existing one. Instead the prepend just adds another route entry. 2. route replace. Existing code replaces first matching multipath route if new route is multipath capable and fallback to first matching non-ECMP route (reject or dev only route) in case one isn't available. New behavior replaces first matching route. (Thanks to Ido for spotting this one) Note: Newer iproute2 is needed to display multipath routes with a dev-only nexthop. This is due to a bug in iproute2 and parsing nexthops. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-05-213-61/+229
| |\ \ \ \ \ | | |_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-05-165-64/+210
| |\ \ \ \ \ | | |_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2018-05-17 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Provide a new BPF helper for doing a FIB and neighbor lookup in the kernel tables from an XDP or tc BPF program. The helper provides a fast-path for forwarding packets. The API supports IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are implemented in this initial work, from David (Ahern). 2) Just a tiny diff but huge feature enabled for nfp driver by extending the BPF offload beyond a pure host processing offload. Offloaded XDP programs are allowed to set the RX queue index and thus opening the door for defining a fully programmable RSS/n-tuple filter replacement. Once BPF decided on a queue already, the device data-path will skip the conventional RSS processing completely, from Jakub. 3) The original sockmap implementation was array based similar to devmap. However unlike devmap where an ifindex has a 1:1 mapping into the map there are use cases with sockets that need to be referenced using longer keys. Hence, sockhash map is added reusing as much of the sockmap code as possible, from John. 4) Introduce BTF ID. The ID is allocatd through an IDR similar as with BPF maps and progs. It also makes BTF accessible to user space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data through BPF_OBJ_GET_INFO_BY_FD, from Martin. 5) Enable BPF stackmap with build_id also in NMI context. Due to the up_read() of current->mm->mmap_sem build_id cannot be parsed. This work defers the up_read() via a per-cpu irq_work so that at least limited support can be enabled, from Song. 6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND JIT conversion as well as implementation of an optimized 32/64 bit immediate load in the arm64 JIT that allows to reduce the number of emitted instructions; in case of tested real-world programs they were shrinking by three percent, from Daniel. 7) Add ifindex parameter to the libbpf loader in order to enable BPF offload support. Right now only iproute2 can load offloaded BPF and this will also enable libbpf for direct integration into other applications, from David (Beckett). 8) Convert the plain text documentation under Documentation/bpf/ into RST format since this is the appropriate standard the kernel is moving to for all documentation. Also add an overview README.rst, from Jesper. 9) Add __printf verification attribute to the bpf_verifier_vlog() helper. Though it uses va_list we can still allow gcc to check the format string, from Mathieu. 10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...' is a bash 4.0+ feature which is not guaranteed to be available when calling out to shell, therefore use a more portable variant, from Joe. 11) Fix a 64 bit division in xdp_umem_reg() by using div_u64() instead of relying on the gcc built-in, from Björn. 12) Fix a sock hashmap kmalloc warning reported by syzbot when an overly large key size is used in hashmap then causing overflows in htab->elem_size. Reject bogus attr->key_size early in the sock_hash_alloc(), from Yonghong. 13) Ensure in BPF selftests when urandom_read is being linked that --build-id is always enabled so that test_stacktrace_build_id[_nmi] won't be failing, from Alexei. 14) Add bitsperlong.h as well as errno.h uapi headers into the tools header infrastructure which point to one of the arch specific uapi headers. This was needed in order to fix a build error on some systems for the BPF selftests, from Sirio. 15) Allow for short options to be used in the xdp_monitor BPF sample code. And also a bpf.h tools uapi header sync in order to fix a selftest build failure. Both from Prashant. 16) More formally clarify the meaning of ID in the direct packet access section of the BPF documentation, from Wang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | net/ipv6: Add fib lookup stubs for use in bpf helperDavid Ahern2018-05-112-2/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add stubs to retrieve a handle to an IPv6 FIB table, fib6_get_table, a stub to do a lookup in a specific table, fib6_table_lookup, and a stub for a full route lookup. The stubs are needed for core bpf code to handle the case when the IPv6 module is not builtin. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
OpenPOWER on IntegriCloud