summaryrefslogtreecommitdiffstats
path: root/net/ipv6/udp_offload.c
Commit message (Collapse)AuthorAgeFilesLines
* net: Remove MPLS GSO feature.Pravin B Shelar2014-11-051-2/+1
| | | | | | | | Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* udp: Changes to udp_offload to support remote checksum offloadTom Herbert2014-11-051-0/+1
| | | | | | | | | | | | Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fou: eliminate IPv4,v6 specific GRO functionsTom Herbert2014-10-031-0/+1
| | | | | | | | | | | | | This patch removes fou[46]_gro_receive and fou[46]_gro_complete functions. The v4 or v6 variants were chosen for the UDP offloads based on the address family of the socket this is not necessary or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb. This is set in udp6_gro_receive and unset in udp4_gro_receive. In fou_gro_receive the value is used to select the correct inet_offloads for the protocol of the outer IP header. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: Generalize skb_udp_segmentTom Herbert2014-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | skb_udp_segment is the function called from udp4_ufo_fragment to segment a UDP tunnel packet. This function currently assumes segmentation is transparent Ethernet bridging (i.e. VXLAN encapsulation). This patch generalizes the function to operate on either Ethertype or IP protocol. The inner_protocol field must be set to the protocol of the inner header. This can now be either an Ethertype or an IP protocol (in a union). A new flag in the skbuff indicates which type is effective. skb_set_inner_protocol and skb_set_inner_ipproto helper functions were added to set the inner_protocol. These functions are called from the point where the tunnel encapsulation is occuring. When skb_udp_tunnel_segment is called, the function to segment the inner packet is selected based on the inner IP or Ethertype. In the case of an IP protocol encapsulation, the function is derived from inet[6]_offloads. In the case of Ethertype, skb->protocol is set to the inner_protocol and skb_mac_gso_segment is called. (GRE currently does this, but it might be possible to lookup the protocol in offload_base and call the appropriate segmenation function directly). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove gso_send_check as an offload callbackTom Herbert2014-09-261-6/+0
| | | | | | | | | | The send_check logic was only interesting in cases of TCP offload and UDP UFO where the checksum needed to be initialized to the pseudo header checksum. Now we've moved that logic into the related gso_segment functions so gso_send_check is no longer needed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: move logic out of udp[46]_ufo_send_checkTom Herbert2014-09-261-22/+18
| | | | | | | | | In udp[46]_ufo_send_check the UDP checksum initialized to the pseudo header checksum. We can move this logic into udp[46]_ufo_fragment. After this change udp[64]_ufo_send_check is a no-op. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: Fix inverted NAPI_GRO_CB(skb)->flush testScott Wood2014-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | Commit 2abb7cdc0d ("udp: Add support for doing checksum unnecessary conversion") caused napi_gro_cb structs with the "flush" field zero to take the "udp_gro_receive" path rather than the "set flush to 1" path that they would previously take. As a result I saw booting from an NFS root hang shortly after starting userspace, with "server not responding" messages. This change to the handling of "flush == 0" packets appears to be incidental to the goal of adding new code in the case where skb_gro_checksum_validate_zero_check() returns zero. Based on that and the fact that it breaks things, I'm assuming that it is unintentional. Fixes: 2abb7cdc0d ("udp: Add support for doing checksum unnecessary conversion") Cc: Tom Herbert <therbert@google.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: udp6_gro_complete() is staticEric Dumazet2014-09-091-1/+1
| | | | | | | | | | | net/ipv6/udp_offload.c:159:5: warning: symbol 'udp6_gro_complete' was not declared. Should it be static? Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 57c67ff4bd92 ("udp: additional GRO support") Cc: Tom Herbert <therbert@google.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: Add support for doing checksum unnecessary conversionTom Herbert2014-09-011-7/+17
| | | | | | | | | | | | | | | | | Add support for doing CHECKSUM_UNNECESSARY to CHECKSUM_COMPLETE conversion in UDP tunneling path. In the normal UDP path, we call skb_checksum_try_convert after locating the UDP socket. The check is that checksum conversion is enabled for the socket (new flag in UDP socket) and that checksum field is non-zero. In the UDP GRO path, we call skb_gro_checksum_try_convert after checksum is validated and checksum field is non-zero. Since this is already in GRO we assume that checksum conversion is always wanted. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp: additional GRO supportTom Herbert2014-08-241-0/+33
| | | | | | | | Implement GRO for UDPv6. Add UDP checksum verification in gro_receive for both UDP4 and UDP6 calling skb_gro_checksum_validate_zero_check. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gre: Call gso_make_checksumTom Herbert2014-06-041-0/+1
| | | | | | | | | | | Call gso_make_checksum. This should have the benefit of using a checksum that may have been previously computed for the packet. This also adds NETIF_F_GSO_GRE_CSUM to differentiate devices that offload GRE GSO with and without the GRE checksum offloaed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add GSO support for UDP tunnels with checksumTom Herbert2014-06-041-1/+3
| | | | | | | | | Added a new netif feature for GSO_UDP_TUNNEL_CSUM. This indicates that a device is capable of computing the UDP checksum in the encapsulating header of a UDP tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: reuse ip6_frag_id from ip6_ufo_append_dataHannes Frederic Sowa2014-02-221-1/+1
| | | | | | | | | | | | | | | | Currently we generate a new fragmentation id on UFO segmentation. It is pretty hairy to identify the correct net namespace and dst there. Especially tunnels use IFF_XMIT_DST_RELEASE and thus have no skb_dst available at all. This causes unreliable or very predictable ipv6 fragmentation id generation while segmentation. Luckily we already have pregenerated the ip6_frag_id in ip6_ufo_append_data and can use it here. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: fix headroom calculation in udp6_ufo_fragmentHannes Frederic Sowa2013-11-051-1/+1
| | | | | | | | | | | | | | | | | | Commit 1e2bd517c108816220f262d7954b697af03b5f9c ("udp6: Fix udp fragmentation for tunnel traffic.") changed the calculation if there is enough space to include a fragment header in the skb from a skb->mac_header dervived one to skb_headroom. Because we already peeled off the skb to transport_header this is wrong. Change this back to check if we have enough room before the mac_header. This fixes a panic Saran Neti reported. He used the tbf scheduler which skb_gso_segments the skb. The offsets get negative and we panic in memcpy because the skb was erroneously not expanded at the head. Reported-by: Saran Neti <Saran.Neti@telus.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: sit: add GSO/TSO supportEric Dumazet2013-10-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipip: add GSO/TSO supportEric Dumazet2013-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now inet_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for IPIP Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO IPIP support) : Before patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3357.88 5.09 3.70 2.983 2.167 After patch : lpq83:~# ./netperf -H 7.7.9.84 -Cc MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 7710.19 4.52 6.62 1.152 1.687 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: unify skb_udp_tunnel_segment() and skb_udp6_tunnel_segment()Cong Wang2013-08-311-55/+1
| | | | | | | | | As suggested by Pravin, we can unify the code in case of duplicated code. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add generic UDP Tunnel segmentationCong Wang2013-08-311-51/+108
| | | | | | | | | | | | | | | | | Similar to commit 731362674580cb0c696cd1b1a03d8461a10cf90a (tunneling: Add generic Tunnel segmentation) This patch adds generic tunneling offloading support for IPv6-UDP based tunnels. This can be used by tunneling protocols like VXLAN. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-06-051-8/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
| * udp6: Fix udp fragmentation for tunnel traffic.Pravin B Shelar2013-05-311-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov <dkravkov@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Tested-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | MPLS: Add limited GSO supportSimon Horman2013-05-271-1/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case where a non-MPLS packet is received and an MPLS stack is added it may well be the case that the original skb is GSO but the NIC used for transmit does not support GSO of MPLS packets. The aim of this code is to provide GSO in software for MPLS packets whose skbs are GSO. SKB Usage: When an implementation adds an MPLS stack to a non-MPLS packet it should do the following to skb metadata: * Set skb->inner_protocol to the old non-MPLS ethertype of the packet. skb->inner_protocol is added by this patch. * Set skb->protocol to the new MPLS ethertype of the packet. * Set skb->network_header to correspond to the end of the L3 header, including the MPLS label stack. I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to kernel" which adds MPLS support to the kernel datapath of Open vSwtich. That patch sets the above requirements in datapath/actions.c:push_mpls() and was used to exercise this code. The datapath patch is against the Open vSwtich tree but it is intended that it be added to the Open vSwtich code present in the mainline Linux kernel at some point. Features: I believe that the approach that I have taken is at least partially consistent with the handling of other protocols. Jesse, I understand that you have some ideas here. I am more than happy to change my implementation. This patch adds dev->mpls_features which may be used by devices to advertise features supported for MPLS packets. A new NETIF_F_MPLS_GSO feature is added for devices which support hardware MPLS GSO offload. Currently no devices support this and MPLS GSO always falls back to software. Alternate Implementation: One possible alternate implementation is to teach netif_skb_features() and skb_network_protocol() about MPLS, in a similar way to their understanding of VLANs. I believe this would avoid the need for net/mpls/mpls_gso.c and in particular the calls to __skb_push() and __skb_push() in mpls_gso_segment(). I have decided on the implementation in this patch as it should not introduce any overhead in the case where mpls_gso is not compiled into the kernel or inserted as a module. MPLS GSO suggested by Jesse Gross. Based in part on "v4 GRE: Add TCP segmentation offload for GRE" by Pravin B Shelar. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunneling: Add generic Tunnel segmentation.Pravin B Shelar2013-03-091-1/+7
| | | | | | | | | | | | | | | | Adds generic tunneling offloading support for IPv4-UDP based tunnels. GSO type is added to request this offload for a skb. netdev feature NETIF_F_UDP_TUNNEL is added for hardware offloaded udp-tunnel support. Currently no device supports this feature, software offload is used. This can be used by tunneling protocols like VXLAN. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* v4 GRE: Add TCP segmentation offload for GREPravin B Shelar2013-02-151-1/+2
| | | | | | | | | | | | | | | | Following patch adds GRE protocol offload handler so that skb_gso_segment() can segment GRE packets. SKB GSO CB is added to keep track of total header length so that skb_segment can push entire header. e.g. in case of GRE, skb_segment need to push inner and outer headers to every segment. New NETIF_F_GRE_GSO feature is added for devices which support HW GRE TSO offload. Currently none of devices support it therefore GRE GSO always fall backs to software GSO. [ Compute pkt_len before ip_local_out() invocation. -DaveM ] Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Fix build error with udp_offloadVlad Yasevich2012-11-151-0/+1
| | | | | | | | | | | | | Add ip6_checksum.h include. This should resolve the following issue that shows up on power: net/ipv6/udp_offload.c: In function 'udp6_ufo_send_check': net/ipv6/udp_offload.c:29:2: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove code duplication between offload structuresVlad Yasevich2012-11-151-2/+4
| | | | | | | Move the offload callbacks into its own structure. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Pull IPv6 GSO registration out of the moduleVlad Yasevich2012-11-151-5/+0
| | | | | | | | | Sing GSO support is now separate, pull it out of the module and make it its own init call. Remove the cleanup functions as they are no longer called. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Separate out UDP offload functionalityVlad Yasevich2012-11-151-0/+122
Pull UDP GSO code into a separate file in preparation for moving the code out of the module. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud