summaryrefslogtreecommitdiffstats
path: root/include/soc
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds2017-05-122-19/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
| * soc/fsl/qe: get rid of immrbar_virt_to_phys()Christophe Leroy2017-04-301-19/+0
| | | | | | | | | | | | | | | | immrbar_virt_to_phys() is not used anymore Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * net: ethernet: ucc_geth: fix MEM_PART_MURAM modeChristophe Leroy2017-04-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation"), muram area is not part of immrbar mapping anymore so immrbar_virt_to_phys() is not usable anymore. Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
* | Merge tag 'armsoc-drivers' of ↵Linus Torvalds2017-05-092-8/+103
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs: Reset subsystem, merged through arm-soc by tradition: - Make bool drivers explicitly non-modular - New support for i.MX7 and Arria10 reset controllers PATA driver for Palmchip BK371 (acked by Tejun) Power domain drivers for i.MX (GPC, GPCv2) - Moved out of mach-imx for GPC - Bunch of tweaks, fixes, etc PMC support for Tegra186 SoC detection support for Renesas RZ/G1H and RZ/G1N Move Tegra flow controller driver from mach directory to drivers/soc - (Power management / CPU power driver) Misc smaller tweaks for other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) soc: pm-domain: Fix the mangled urls soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0 soc: renesas: rcar-sysc: Add support for fixing up power area tables soc: renesas: Register SoC device early soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible soc: imx: gpc: add defines for domain index soc: imx: Add GPCv2 power gating driver dt-bindings: Add GPCv2 power gating driver ARM/clk: move the ICST library to drivers/clk ARM: plat-versatile: remove stale clock header ARM: keystone: Drop PM domain support for k2g soc: ti: Add ti_sci_pm_domains driver dt-bindings: Add TI SCI PM Domains PM / Domains: Do not check if simple providers have phandle cells PM / Domains: Add generic data pointer to genpd data struct soc/tegra: Add initial flowctrl support for Tegra132/210 soc/tegra: flowctrl: Add basic platform driver soc/tegra: Move Tegra flowctrl driver ARM: tegra: Remove unnecessary inclusion of flowctrl header ...
| * | soc/tegra: Move Tegra flowctrl driverJon Hunter2017-04-041-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flowctrl driver is required for both ARM and ARM64 Tegra devices and in order to enable support for it for ARM64, move the Tegra flowctrl driver into drivers/soc/tegra. By moving the flowctrl driver, tegra_flowctrl_init() is now called by via an early initcall and to prevent this function from attempting to mapping IO space for a non-Tegra device, a test for 'soc_is_tegra()' is also added. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | soc/tegra: Fix link errors with PMC disabledArnd Bergmann2017-04-041-8/+21
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new Tegra186 PMC driver merged, anything that relies on the previous PMC driver fails to link when that is disabled: arch/arm/mach-tegra/pm.o: In function `tegra_pm_set': pm.c:(.text.tegra_pm_set+0x3c): undefined reference to `tegra_pmc_enter_suspend_mode' arch/arm/mach-tegra/pm.o: In function `tegra_suspend_enter': pm.c:(.text.tegra_suspend_enter+0x4): undefined reference to `tegra_pmc_get_suspend_mode' arch/arm/mach-tegra/pm.o: In function `tegra_init_suspend': pm.c:(.init.text+0x1c): undefined reference to `tegra_pmc_get_suspend_mode' pm.c:(.init.text+0x74): undefined reference to `tegra_pmc_set_suspend_mode' ERROR: tegra_powergate_sequence_power_up [drivers/ata/ahci_tegra.ko] undefined! ERROR: tegra_powergate_power_off [drivers/ata/ahci_tegra.ko] undefined! Making the definition depend on the presence of the driver makes it build again, though that might not be the correct fix. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 854014236290 ("soc/tegra: Implement Tegra186 PMC support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | soc/qman: add macros needed by caam/qi driverHoria Geantă2017-03-241-0/+2
| | | | | | | | | | | | | | | | A few other things need to be added in soc/qman, such that caam/qi won't open-code them. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | soc/qman: export non-programmable FQD fields queryHoria Geantă2017-03-241-0/+68
| | | | | | | | | | | | | | | | | | Export qman_query_fq_np() function and related structures. This will be needed in the caam/qi driver, where "queue empty" condition will be decided based on the frm_cnt. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | soc/qman: add dedicated channel ID for CAAMHoria Geantă2017-03-241-0/+3
| | | | | | | | | | | | | | | | Add and export the ID of the channel serviced by the CAAM (Cryptographic Acceleration and Assurance Module) DCP. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | soc/qman: export volatile dequeue related structsHoria Geantă2017-03-241-0/+36
|/ | | | | | | | Since qman_volatile_dequeue() is already exported, move the related structures into the public header too. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Merge tag 'arc-4.11-rc1' of ↵Linus Torvalds2017-02-221-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Intc imporvements [Yuriy] - VDK platform updates [Alexey] * tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant ARCv2: intc: Delete useless comments in Device Trees ARCv2: IDU-intc: Delete deprecated parameters in Device Trees ARCv2: IDU-intc: mask all common interrupts by default ARCv2: IDU-intc: Use build registers for getting numbers of interrupts ARCv2: intc: Set default priority for all core interrupts ARCv2: intc: Use runtime value of irq count for setting up intc ARCv2: intc: Rework the build time irq count information ARC: [intc-*]: confine NR_CPU_IRQS to intc code ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg arc: vdk: Add support of UIO arc: vdk: Add support of MMC controller arc: vdk: Disable halt on reset
| * ARCv2: IDU-intc: Use build registers for getting numbers of interruptsYuriy Kolerov2017-02-061-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enhancement is needed to allow masking all available common interrupts in IDU interrupt controller in boot time since the kernel can discover a number of them from the build register. Also now there is no need to specify in device tree a list of used core interrupts by IDU. E.g. before: idu_intc: idu-interrupt-controller { compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; #interrupt-cells = <2>; interrupts = <24 25 26 27 28 29 30 31>; }; and after: idu_intc: idu-interrupt-controller { compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; #interrupt-cells = <2>; }; Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* | Merge tag 'for-v4.11' of ↵Linus Torvalds2017-02-201-0/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New drivers: - sbs-charger driver - max14656_charger_detector - axp20x_ac_power New chip/feature support" - axp20x_usb_power: add AXP223 support - tps65217: add usb charger support - qcom_smbb: support otg regulator - at91-reset: add samx7 support Dropped drivers: - intel_mid_battery (platform was dropped) Fixes: - at91-poweroff: avoid wearing off LPDDR memory - replace deprecated extcon API - lots of cleanup and style fixes - misc minor functionality fixes" * tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits) power: supply: add AC power supply driver for AXP20X and AXP22X PMICs dt-bindings: power: supply: add AXP20X/AXP22X AC power supply power: supply: axp20x_usb_power: use IIO channels when available power: supply: max14656: Export I2C and OF device ID as module aliases power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference power: supply: bq24190_charger: Adjust formatting power: supply: bq24190_charger: Handle fault before status on interrupt power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread() power: supply: bq24190_charger: Call power_supply_changed() for relevant component power: supply: bq24190_charger: Install irq_handler_thread() at end of probe() power: supply: bq24190_charger: Call set_mode_host() on pm_resume() power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING power: supply: qcom_smbb: add regulator dependency power: reset: at91-reset: remove leftover platform_device_id power: reset: at91-reset: add samx7 support power: supply: max14656: fix platform_no_drv_owner.cocci warnings power: supply: pcf50633-charger: Compress return logic into one line. power: supply: ab8500_btemp: Compress return logic into one line. power: reset: at91-poweroff: timely shutdown LPDDR memories ARM: at91: define LPDDR types ...
| * ARM: at91: define LPDDR typesAlexandre Belloni2017-01-161-0/+3
| | | | | | | | | | | | | | | | | | The Atmel MPDDR controller support LPDDR2 and LPDDR3 memories, add their types. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* | ARCv2: MCIP: update the BCR per current changesVineet Gupta2017-01-241-8/+8
|/ | | | Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds2016-12-161-28/+34
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
| * soc/qman: Handle endianness of h/w descriptorsClaudiu Manoil2016-11-231-23/+25
| | | | | | | | | | | | | | | | | | | | The hardware descriptors have big endian (BE) format. Provide proper endianness handling for the remaining descriptor fields, to ensure they are correctly accessed by non-BE CPUs too. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * soc/qman: Clean up CGR CSCN target update operationsClaudiu Manoil2016-11-231-2/+2
| | | | | | | | | | Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * soc/qman: Change remaining contextB into context_bClaudiu Manoil2016-11-231-6/+6
| | | | | | | | | | | | | | | | | | | | There are multiple occurences of both contextB and context_b in different h/w descriptors, referring to the same descriptor field known as "Context B". Stick with the "context_b" naming, for obvious reasons including consistency (see also context_a). Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * soc/qman: Drop unused field from eqcr/dqrr descriptorsClaudiu Manoil2016-11-231-2/+1
| | | | | | | | | | | | | | ORP ("Order Restoration Point") mechanism not supported. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * soc/qman: Fix accesses to fqid, cleanupClaudiu Manoil2016-11-231-0/+5
| | | | | | | | | | | | | | | | | | | | Preventively mask every access to the 'fqid' h/w field, since it is defined as a 24-bit field, for every h/w descriptor. Add generic accessors for this field to ensure correct access. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * soc/qman: Fix struct qm_fqd set accessor for context_aClaudiu Manoil2016-11-231-1/+1
| | | | | | | | | | | | | | context_a.hi is 32bit Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
* | Merge tag 'armsoc-drivers' of ↵Linus Torvalds2016-12-155-31/+1965
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
| * \ Merge tag 'tegra-for-4.10-soc' of ↵Olof Johansson2016-11-181-31/+95
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers soc: tegra: Core SoC changes for v4.10-rc1 This contains mostly cleanup and new feature work on the power management controller as well as the addition of a Kconfig symbol for the new Tegra186 (Parker) SoC generation. * tag 'tegra-for-4.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Use consistent naming for PM domains soc/tegra: pmc: Remove genpd when adding provider fails soc/tegra: pmc: Check return code for pm_genpd_init() soc/tegra: pmc: Clean-up I/O rail error messages soc/tegra: pmc: Simplify IO rail bit handling soc/tegra: pmc: Guard against uninitialised PMC clock soc/tegra: pmc: Add I/O pad voltage support soc/tegra: pmc: Use consistent ordering of bit definitions soc/tegra: pmc: Correct type of variable for tegra_pmc_readl() soc/tegra: pmc: Use BIT macro for register field definition Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | soc/tegra: pmc: Add I/O pad voltage supportLaxman Dewangan2016-11-151-31/+95
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad can be used to control the common voltage signal level and power state of the pins in the given pad. I/O pads can be powered down even if the system is active, which can save power from that I/O interface. For SoC generations prior to Tegra124 the I/O pad voltage is automatically detected and hence the system software doesn't need to configure it. However, starting with Tegra210 the detection logic has been removed, so explicit control of the I/O pad voltage by system software is required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | Merge tag 'tegra-for-4.10-firmware' of ↵Olof Johansson2016-11-183-0/+1851
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers firmware: Add Tegra IVC and BPMP support IVC is an inter-processor communication protocol that uses shared memory to exchange data between processors. The BPMP driver makes use of this to communicate with the Boot and Power Management Processor (BPMP) and uses an additional hardware synchronization primitive from the HSP block to signal availability of new data (doorbell). Firmware running on the BPMP implements a number of services such as the control of clocks and resets within the system, or the ability to ungate or gate power partitions. * tag 'tegra-for-4.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | firmware: tegra: Add BPMP supportThierry Reding2016-11-182-0/+1742
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Boot and Power Management Processor (BPMP) is a co-processor found on Tegra SoCs. It is designed to handle the early stages of the boot process and offload power management tasks (such as clocks, resets, powergates, ...) as well as system control services. Compared to the ARM SCPI, the services provided by BPMP are message- based rather than method-based. The BPMP firmware driver provides the services to transmit data to and receive data from the BPMP. Users can also register a Message ReQuest (MRQ), for which a service routine will be run when a corresponding event is received from the firmware. A set of messages, called the BPMP ABI, are specified for a number of different services provided by the BPMP (such as clocks or resets). Based on work by Sivaram Nair <sivaramn@nvidia.com> and Joseph Lo <josephl@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com>
| | * | firmware: tegra: Add IVC libraryThierry Reding2016-11-181-0/+109
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Inter-VM communication (IVC) is a communication protocol which is designed for interprocessor communication (IPC) or the communication between the hypervisor and the virtual machine with a guest OS. Message channels are used to communicate between processors. They are backed by DRAM or SRAM, so care must be taken to maintain coherence of data. The IVC library maintains memory-based descriptors for the transmission and reception channels as well as the data coherence of the counter and payload. Clients, such as the driver for the BPMP firmware, can use the library to exchange messages with remote processors. Based on work by Peter Newman <pnewman@nvidia.com> and Joseph Lo <josephl@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | ARM: at91: add secumod register definitionsAlexandre Belloni2016-11-071-0/+19
| |/ | | | | | | | | | | | | Add registers and bits definitions for the security module found on sama5d2. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
* | Merge tag 'arc-4.10-rc1-part1' of ↵Linus Torvalds2016-12-154-0/+263
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "These are mostly timer/clocksource driver updates which were Reviewed/Acked by Daniel but had to be merged via ARC tree due to dependencies. I will follow up with another pull request with actual ARC changes early next week ! Summary: - Moving ARC timer driver into drivers/clocksource - EZChip timer driver updates [Noam] - ARC AXS103 and HAPS platform updates [Alexey]" * tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: axs10x: really enable ARC PGU ARC: rename Zebu platform support to HAPS clocksource: nps: avoid maybe-uninitialized warning clocksource: Add clockevent support to NPS400 driver clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer soc: Support for NPS HW scheduling clocksource: import ARC timer driver ARC: breakout timer include code into separate header ... ARC: move mcip.h into include/soc and adjust the includes ARC: breakout aux handling into a separate header ARC: time: move time_init() out of the driver ARC: timer: gfrc, rtc: build under same option (64-bit timers) ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ... ARC: timer: gfrc, rtc: deuglify big endian code
| * | soc: Support for NPS HW schedulingNoam Camus2016-11-301-0/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new header file is for NPS400 SoC (part of ARC architecture). The header file includes macros for save/restore of HW scheduling. The control of HW scheduling is achieved by writing core registers. This code was moved from arc/plat-eznps so it can be used from drivers/clocksource/, available only for CONFIG_EZNPS_MTM_EXT. Signed-off-by: Noam Camus <noamca@mellanox.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
| * | ARC: breakout timer include code into separate header ...Vineet Gupta2016-11-301-0/+38
| | | | | | | | | | | | | | | | | | ... which allows for use in drivers/clocksource later Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | ARC: move mcip.h into include/soc and adjust the includesVineet Gupta2016-11-301-0/+103
| | | | | | | | | | | | | | | | | | | | | | | | Also remove the dependency on ARCv2, to increase compile coverage for !ARCV2 builds Acked-by: Daniel Lezcano <daniel.lezcnao@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | ARC: breakout aux handling into a separate headerVineet Gupta2016-11-301-0/+63
| |/ | | | | | | | | | | | | ARC timers use aux registers for programming and this paves way for moving ARC timer drivers into drivers/clocksource Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* | staging: vc04_services: fix up rpi firmware functionsGreg Kroah-Hartman2016-10-161-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The raspberrypi-firmware.h file should provide empty functions if we aren't building in that option. This makes it easier to test-build code, and not have odd warnings about unused variables if you just try to #define away the functions. Cc: Daniel Stone <daniels@collabora.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: popcornmix <popcornmix@gmail.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ARM: bcm2835: Add #define for VCHIQ property message.Eric Anholt2016-10-161-0/+2
|/ | | | | | | | This comes from the downstream tree and is needed for the new VCHIQ driver in staging. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'powerpc-4.9-2' of ↵Linus Torvalds2016-10-142-0/+1203
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Some more powerpc updates for 4.9: Freescale updates from Scott Wood: - qbman support (a prerequisite for datapath drivers such as ethernet) - a PCI DMA fix+improvement - reset handler changes - more 8xx optimizations - some cleanups and fixes.' Fixes: - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman) - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman) - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour) - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin) - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras) - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman) Other: - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson) - MAINTAINERS: Drop separate pseries entry (Michael Ellerman) - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman): * tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits) powerpc/mm/hash64: Fix might_have_hea() check powerpc/64: Fix incorrect return value from __copy_tofrom_user powerpc/64s: Fix power4_fixup_nap placement powerpc/pseries: Fix stack corruption in htpe code selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes MAINTAINERS: Update powerpc website & add selftests MAINTAINERS: Drop separate pseries entry MAINTAINERS: Remove myself from PA Semi entries selftests/powerpc: Add missing binaries to .gitignores arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig soc/qman: Add self-test for QMan driver soc/bman: Add self-test for BMan driver soc/fsl: Introduce DPAA 1.x QMan device driver soc/fsl: Introduce DPAA 1.x BMan device driver powerpc/8xx: make user addr DTLB miss the short path powerpc/8xx: Move additional DTLBMiss handlers out of exception area powerpc/8xx: use r3 to scratch CR in ITLBmiss soc/fsl/qe: fix gpio save_regs functions powerpc/8xx: add dedicated machine check handler powerpc/8xx: add system_reset_exception ...
| * soc/fsl: Introduce DPAA 1.x QMan device driverClaudiu Manoil2016-09-251-0/+1074
| | | | | | | | | | | | | | | | | | | | | | | | This driver enables the Freescale DPAA 1.x Queue Manager block. QMan is a hardware accelerator that manages frame queues. It allows CPUs and other accelerators connected to the SoC datapath to enqueue and dequeue ethernet frames, thus providing the infrastructure for data exchange among CPUs and datapath accelerators. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
| * soc/fsl: Introduce DPAA 1.x BMan device driverClaudiu Manoil2016-09-251-0/+129
| | | | | | | | | | | | | | | | | | | | | | This driver enables the Freescale DPAA 1.x Buffer Manager block. BMan is a hardware accelerator that manages buffer pools. It allows CPUs and other accelerators connected to the SoC datapath to acquire and release buffers during data processing. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
* | Merge tag 'clk-for-linus' of ↵Linus Torvalds2016-10-041-0/+27
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk framework updates from Stephen Boyd: "The core clk framework changes are small again. They're mostly minor fixes that weren't causing enough problems (or any problems when we're just clarifying things) to warrant sending outside the merge window. The majority of changes are in drivers for various SoCs. Full details are in the logs, but here's the summary. Core: - Better support for DeviceTree overlays with the addition of the CLK_OF_DECLARE_DRIVER macro. Now we won't probe a clk driver for a device node that matched during of_clk_init(), unless the driver uses CLK_OF_DECLARE_DRIVER instead of CLK_OF_DECLARE. This allows overlays to work cleanly for drivers that must probe before the device model is ready, and also after it's ready when an overlay is loaded. - Clarification in the code around how clk_hw pointers are returned from of clk providers - Proper migration of prepare/enable counts to parents when the clk tree is constructed New Drivers: - Socionext's UniPhier SoCs - Loongson1C - ZTE ZX296718 - Qualcomm MDM9615 - Amlogic GXBB AO clocks and resets - Broadcom BCM53573 ILP - Maxim MAX77620 Updates: - Four Allwinner SoCs are migrated to the new style clk driver (A31, A31s, A23 and A33) - Exynos 5xxx audio and DRAM clks - Loongson1B AC97, DMA and NAND clks - Rockchip DDR clks and rk3399 driver tweaks - Renesas R-Car M3-W (r8a7796) SoC SDHI interface and Watchdog timer clks - Renasas R-Car H3 and M3-W CMT clks and RAVB+Thermal clks for M3-W - Amlogic GXBB MMC gate clks - at91 sama5d4 sckc - Removal of STiH415 and STiH416 clk support as the SoC is being removed - Rework of STiH4xx clk support for new style bindings - Continuation of driver migration to clk_hw based registration APIs - xgene PMD support - bcm2835 critical clk markings - ARM versatile ICST" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (199 commits) CLK: Add Loongson1C clock support clk: Loongson1: Make use of GENMASK clk: Loongson1: Update clocks of Loongson1B clk: Loongson1: Refactor Loongson1 clock clk: change the type of clk_hw_onecell_data.num to unsigned int clk: zx296718: register driver earlier with core_initcall clk: mvebu: dynamically allocate resources in Armada CP110 system controller clk: mvebu: fix setting unwanted flags in CP110 gate clock clk: nxp: clk-lpc32xx: Unmap region obtained by of_iomap clk: mediatek: clk-mt8173: Unmap region obtained by of_iomap clk: sunxi-ng: Fix reset offset for the A23 and A33 clk: at91: sckc: optimize boot time clk: at91: Add sama5d4 sckc support clk: at91: move slow clock controller clocks to sckc.c clk: imx6: initialize GPU clocks clk: imx6: fix i.MX6DL clock tree to reflect reality clk: imx53: Add clocks configuration clk: uniphier: add clock data for UniPhier SoCs clk: uniphier: add core support code for UniPhier clock driver clk: bcm: Add driver for BCM53573 ILP clock ...
| * | soc: rockchip: add header for ddr rate SIP interfaceLin Huang2016-08-311-0/+27
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a header for the SIP interface defined to access the dcf controller handling ddr rate changes on rk3399 (and most likely later socs). This interface is shared between the clock driver as well as the devfreq driver. The SIP interface counterpart was merged from pull-request #684 [0] into the upstream arm-trusted-firmware codebase. [0] https://github.com/ARM-software/arm-trusted-firmware/pull/684 Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* | usb: ohci-at91: Forcibly suspend ports while USB suspendWenyou Yang2016-08-301-0/+14
|/ | | | | | | | | | | | | | | | | | | | | The usb controller does not manage correctly the suspend mode for the ehci. In echi mode, there is no way to suspend without any device connected to it. This is why this specific control is added to fix this issue. Since the suspend mode works in ohci mode, this specific control works by suspend the usb controller in ohci mode. This specific control is by setting the SUSPEND_A/B/C fields of SFR_OHCIICR(OHCI Interrupt Configuration Register) in the SFR while the OHCI USB suspend. This set operation must be done before the USB clock disabled, clear operation after the USB clock enabled. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2016-08-011-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
| * soc/tegra: Stub out PCIe IRQ workaround on 64-bit ARMThierry Reding2016-06-301-1/+1
| | | | | | | | | | | | | | | | | | The PCIe host controller found on Tegra20 has a hardware bug that causes PCIe interrupts to get lost when LP2 is enabled. Stub out the workaround on 64-bit ARM because none of the more recent Tegra SoC generations seem to have this bug anymore. Signed-off-by: Thierry Reding <treding@nvidia.com>
* | Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-08-011-0/+25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
| * | ARM: imx6: fix static declaration in include/soc/imx/cpuidle.hBen Dooks2016-06-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If both CONFIG_CPU_IDLE or CONFIG_SOC_IMX6Q are not set then the imx6q_cpuidle_fec_irqs_used() and other functions should be marked static inline to avoid the following warnings whilst building drivers/net/ethernet/freescale: include/soc/imx/cpuidle.h:21:6: warning: symbol 'imx6q_cpuidle_fec_irqs_used' was not declared. Should it be static? include/soc/imx/cpuidle.h:22:6: warning: symbol 'imx6q_cpuidle_fec_irqs_unused' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | ARM: imx6: disable deeper idle states when FEC is active w/o HW workaroundLucas Stach2016-06-121-0/+25
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the CPUs when they are in wait(unclocked) state. As the hardware workaround isn't applicable to all boards, disable the deeper idle state when the workaround isn't present and the FEC is in use. This allows to safely run a kernel with CPUidle enabled on all i.MX6 boards. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: David S. Miller <davem@davemloft.net> (for network changes) Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | fsl/qe: Do not prefix header guard with CONFIG_Andreas Ziegler2016-06-081-2/+2
| | | | | | | | | | | | | | | | The CONFIG_ prefix should only be used for options which can be configured through Kconfig and not for guarding headers. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: support hdlc function for QE-UCCZhao Qiang2016-06-072-2/+21
| | | | | | | | | | | | | | | | The driver add hdlc support for Freescale QUICC Engine. It support NMSI and TSA mode. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | fsl/qe: Add QE TDM libZhao Qiang2016-06-072-4/+95
| | | | | | | | | | | | | | | | | | | | QE has module to support TDM, some other protocols supported by QE are based on TDM. add a qe-tdm lib, this lib provides functions to the protocols using TDM to configurate QE-TDM. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud