summaryrefslogtreecommitdiffstats
path: root/include/linux/netdevice.h
Commit message (Collapse)AuthorAgeFilesLines
...
* | net: introduce napi_schedule_irqoff()Eric Dumazet2014-10-291-0/+13
|/ | | | | | | | | | | | | | napi_schedule() can be called from any context and has to mask hard irqs. Add a variant that can only be called from hard interrupts handlers or when irqs are already masked. Many NIC drivers can use it from their hard IRQ handler instead of generic variant. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add ndo_gso_checkTom Herbert2014-10-151-1/+11
| | | | | | | | | | | | | | Add ndo_gso_check which a device can define to indicate whether is is capable of doing GSO on a packet. This funciton would be called from the stack to determine whether software GSO is needed to be done. A driver should populate this function if it advertises GSO types for which there are combinations that it wouldn't be able to handle. For instance a device that performs UDP tunneling might only implement support for transparent Ethernet bridging type of inner packets or might have limitations on lengths of inner headers. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpersEric Dumazet2014-10-081-0/+29
| | | | | | | | | | Add two helpers so that drivers do not have to care of BQL being available or not. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jim Davis <jim.epost@gmail.com> Fixes: 29d40c903247 ("net/mlx4_en: Use prefetch in tx path") Signed-off-by: David S. Miller <davem@davemloft.net>
* net: better IFF_XMIT_DST_RELEASE supportEric Dumazet2014-10-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: introduce netdevice gso_min_segs attributeEric Dumazet2014-10-061-1/+3
| | | | | | | | | | | | | | | Some TSO engines might have a too heavy setup cost, that impacts performance on hosts sending small bursts (2 MSS per packet). This patch adds a device gso_min_segs, allowing drivers to set a minimum segment size for TSO packets, according to the NIC performance. Tested on a mlx4 NIC, this allows to get a ~110% increase of throughput when sending 2 MSS per packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fou: eliminate IPv4,v6 specific GRO functionsTom Herbert2014-10-031-0/+3
| | | | | | | | | | | | | This patch removes fou[46]_gro_receive and fou[46]_gro_complete functions. The v4 or v6 variants were chosen for the UDP offloads based on the address family of the socket this is not necessary or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb. This is set in udp6_gro_receive and unset in udp4_gro_receive. In fou_gro_receive the value is used to select the correct inet_offloads for the protocol of the outer IP header. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qdisc: validate skb without holding lockEric Dumazet2014-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Validation of skb can be pretty expensive : GSO segmentation and/or checksum computations. We can do this without holding qdisc lock, so that other cpus can queue additional packets. Trick is that requeued packets were already validated, so we carry a boolean so that sch_direct_xmit() can validate a fresh skb list, or directly use an old one. Tested on 40Gb NIC (8 TX queues) and 200 concurrent flows, 48 threads host. Turning TSO on or off had no effect on throughput, only few more cpu cycles. Lock contention on qdisc lock disappeared. Same if disabling TX checksum offload. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Change netdev_<level> logging functions to return voidJoe Perches2014-09-261-10/+9
| | | | | | | | No caller or macro uses the return value so make all the functions return void. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove gso_send_check as an offload callbackTom Herbert2014-09-261-1/+0
| | | | | | | | | | The send_check logic was only interesting in cases of TCP offload and UDP UFO where the checksum needed to be initialized to the pseudo header checksum. Now we've moved that logic into the related gso_segment functions so gso_send_check is no longer needed. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fou: Add GRO supportTom Herbert2014-09-191-1/+2
| | | | | | | | | | Implement fou_gro_receive and fou_gro_complete, and populate these in the correponsing udp_offloads for the socket. Added ipproto to udp_offloads and pass this from UDP to the fou GRO routine in proto field of napi_gro_cb structure. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: Split ops up, and avoid assigning tag_protocol and receive separatelyAlexander Duyck2014-09-151-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | This change addresses several issues. First, it was possible to set tag_protocol without setting the ops pointer. To correct that I have reordered things so that rcv is now populated before we set tag_protocol. Second, it didn't make much sense to keep setting the device ops each time a new slave was registered. So by moving the receive portion out into root switch initialization that issue should be addressed. Third, I wanted to avoid sending tags if the rcv pointer was not registered so I changed the tag check to verify if the rcv function pointer is set on the root tree. If it is then we start sending DSA tagged frames. Finally I split the device ops pointer in the structures into two spots. I placed the rcv function pointer in the root switch since this makes it easiest to access from there, and I placed the xmit function pointer in the slave for the same reason. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: Support DSA tagging when DSA is built as a moduleAlexander Duyck2014-09-131-1/+1
| | | | | | | | | | This change corrects an error seen when DSA tagging is built as a module. Without this change it is not possible to get XDSA tagged frames as the test for tagging is stripped by the #ifdef check. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: drop useless rcu_read_lock() in anycastWANG Cong2014-09-131-2/+2
| | | | | | | | These code is now protected by rtnl lock, rcu read lock is useless now. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qdisc: use rcu prefix and silence sparse warningsJohn Fastabend2014-09-131-25/+4
| | | | | | | | | | | | | | | Add __rcu notation to qdisc handling by doing this we can make smatch output more legible. And anyways some of the cases should be using rcu_dereference() see qdisc_all_tx_empty(), qdisc_tx_chainging(), and so on. Also *wake_queue() API is commonly called from driver timer routines without rcu lock or rtnl lock. So I added rcu_read_lock() blocks around netif_wake_subqueue and netif_tx_wake_queue. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-09-071-2/+2
|\
| * net: treewide: Fix typo found in DocBook/networking.xmlMasanari Iida2014-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | This patch fix spelling typo found in DocBook/networking.xml. It is because the neworking.xml is generated from comments in the source, I have to fix typo in comments within the source. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Infrastructure for checksum unnecessary conversionsTom Herbert2014-09-011-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For normal path, added skb_checksum_try_convert which is called to attempt to convert CHECKSUM_UNNECESSARY to CHECKSUM_COMPLETE. The primary condition to allow this is that ip_summed is CHECKSUM_NONE and csum_valid is true, which will be the state after consuming a CHECKSUM_UNNECESSARY. For GRO path, added skb_gro_checksum_try_convert which is the GRO analogue of skb_checksum_try_convert. The primary condition to allow this is that NAPI_GRO_CB(skb)->csum_cnt == 0 and NAPI_GRO_CB(skb)->csum_valid is set. This implies that we have consumed all available CHECKSUM_UNNECESSARY checksums in the GRO path. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Support for csum_bad in skbuffTom Herbert2014-09-011-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This flag indicates that an invalid checksum was detected in the packet. __skb_mark_checksum_bad helper function was added to set this. Checksums can be marked bad from a driver or the GRO path (the latter is implemented in this patch). csum_bad is checked in __skb_checksum_validate_complete (i.e. calling that when ip_summed == CHECKSUM_NONE). csum_bad works in conjunction with ip_summed value. In the case that ip_summed is CHECKSUM_NONE and csum_bad is set, this implies that the first (or next) checksum encountered in the packet is bad. When ip_summed is CHECKSUM_UNNECESSARY, the first checksum after the last one validated is bad. For example, if ip_summed == CHECKSUM_UNNECESSARY, csum_level == 1, and csum_bad is set-- then the third checksum in the packet is bad. In the normal path, the packet will be dropped when processing the protocol layer of the bad checksum: __skb_decr_checksum_unnecessary called twice for the good checksums changing ip_summed to CHECKSUM_NONE so that __skb_checksum_validate_complete is called to validate the third checksum and that will fail since csum_bad is set. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Don't keep around original SKB when we software segment GSO frames.David S. Miller2014-09-011-2/+2
| | | | | | | | | | | | | | Just maintain the list properly by returning the head of the remaining SKB list from dev_hard_start_xmit(). Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Validate xmit SKBs right when we pull them out of the qdisc.David S. Miller2014-09-011-0/+1
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Pass a "more" indication down into netdev_start_xmit() code paths.David S. Miller2014-09-011-4/+5
| | | | | | | | | | | | For now it will always be false. Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Do txq_trans_update() in netdev_start_xmit()David S. Miller2014-09-011-2/+8
| | | | | | | | | | | | | | That way we don't have to audit every call site to make sure it is doing this properly. Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Allow GRO to use and set levels of checksum unnecessaryTom Herbert2014-08-291-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow GRO path to "consume" checksums provided in CHECKSUM_UNNECESSARY and to report new checksums verfied for use in fallback to normal path. Change GRO checksum path to track csum_level using a csum_cnt field in NAPI_GRO_CB. On GRO initialization, if ip_summed is CHECKSUM_UNNECESSARY set NAPI_GRO_CB(skb)->csum_cnt to skb->csum_level + 1. For each checksum verified, decrement NAPI_GRO_CB(skb)->csum_cnt while its greater than zero. If a checksum is verfied and NAPI_GRO_CB(skb)->csum_cnt == 0, we have verified a deeper checksum than originally indicated in skbuf so increment csum_level (or initialize to CHECKSUM_UNNECESSARY if ip_summed is CHECKSUM_NONE or CHECKSUM_COMPLETE). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: add skb_get_tx_queue() helperDaniel Borkmann2014-08-291-0/+6
| | | | | | | | | | | | | | | | Replace occurences of skb_get_queue_mapping() and follow-up netdev_get_tx_queue() with an actual helper function. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: allow switches to work without taggingFlorian Fainelli2014-08-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case switch port tagging is disabled (voluntarily, or the switch just does not support it), allow us to continue using the defined set of dsa_device_ops in net/dsa/slave.c. We introduce dsa_protocol_is_tagged() to check whether we need to override skb->protocol and go through the DSA-specifif packet_type function, or if we just go on and receive the SKB through the normal path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: reduce number of protocol hooksFlorian Fainelli2014-08-271-16/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DSA is currently registering one packet_type function per EtherType it needs to intercept in the receive path of a DSA-enabled Ethernet device. Right now we have three of them: trailer, DSA and eDSA, and there might be more in the future, this will not scale to the addition of new protocols. This patch proceeds with adding a new layer of abstraction and two new functions: dsa_switch_rcv() which will dispatch into the tag-protocol specific receive function implemented by net/dsa/tag_*.c dsa_slave_xmit() which will dispatch into the tag-protocol specific transmit function implemented by net/dsa/tag_*.c When we do create the per-port slave network devices, we iterate over the switch protocol to assign the DSA-specific receive and transmit operations. A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER like it used to be. This allows us to greatly simplify the check in eth_type_trans() and always override the skb->protocol with ETH_P_XDSA for Ethernet switches tagged protocol, while also reducing the number repetitive slave netdevice_ops assignments. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Remove ndo_xmit_flush netdev operation, use signalling instead.David S. Miller2014-08-251-23/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Jesper Dangaard Brouer, for high packet rates the overhead of having another indirect call in the TX path is non-trivial. There is the indirect call itself, and then there is all of the reloading of the state to refetch the tail pointer value and then write the device register. Move to a more passive scheme, which requires very light modifications to the device drivers. The signal is a new skb->xmit_more value, if it is non-zero it means that more SKBs are pending to be transmitted on the same queue as the current SKB. And therefore, the driver may elide the tail pointer update. Right now skb->xmit_more is always zero. Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Add ops->ndo_xmit_flush()David S. Miller2014-08-241-0/+35
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: skb_gro_checksum_* functionsTom Herbert2014-08-241-2/+74
| | | | | | | | | | | | | | | | | | | | Add skb_gro_checksum_validate, skb_gro_checksum_validate_zero_check, and skb_gro_checksum_simple_validate, and __skb_gro_checksum_complete. These are the cognates of the normal checksum functions but are used in the gro_receive path and operate on GRO related fields in sk_buffs. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: create netlink event when bonding option is changedJiri Pirko2014-08-221-0/+1
|/ | | | | | | | | Userspace needs to be notified if one changes some option. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: kernel-doc compliant documentation for net_deviceKaroly Kemeny2014-07-311-131/+250
| | | | | | | | | | | | Net_device is a vast and important structure, but it has no kernel-doc compliant documentation. This patch extracts the comments from the structure to clean it up, and let the scripts extract documentation from it. I know that the patch is big, but it's just reordering of comments into the appropriate form, and adding a few more, for the missing members. Signed-off-by: Karoly Kemeny <karoly.kemeny@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: print net_device reg_state in netdev_* unless it's registeredVeaceslav Falico2014-07-201-1/+17
| | | | | | | | | | | | | | | | | | This way we'll always know in what status the device is, unless it's running normally (i.e. NETDEV_REGISTERED). Also, emit a warning once in case of a bad reg_state. CC: "David S. Miller" <davem@davemloft.net> CC: Jason Baron <jbaron@akamai.com> CC: Eric Dumazet <edumazet@google.com> CC: Vlad Yasevich <vyasevic@redhat.com> CC: stephen hemminger <stephen@networkplumber.org> CC: Jerry Chu <hkchu@google.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Joe Perches <joe@perches.com> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: use dev->name in netdev_pr* when it's availableVeaceslav Falico2014-07-201-2/+2
| | | | | | | | | | | | | | | | | | netdev_name() returns dev->name only when the net_device is in NETREG_REGISTERED state. However, dev->name is always populated on creation, so we can easily use it. There are two cases when there's no real name - when it's an empty string or when the name is in form of "eth%d", then netdev_name() returns "unnamed net_device". CC: "David S. Miller" <davem@davemloft.net> CC: Tom Gundersen <teg@jklm.no> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: set name_assign_type in alloc_netdev()Tom Gundersen2014-07-151-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add name_assign_type netdev attributeTom Gundersen2014-07-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on a patch by David Herrmann. The name_assign_type attribute gives hints where the interface name of a given net-device comes from. These values are currently defined: NET_NAME_ENUM: The ifname is provided by the kernel with an enumerated suffix, typically based on order of discovery. Names may be reused and unpredictable. NET_NAME_PREDICTABLE: The ifname has been assigned by the kernel in a predictable way that is guaranteed to avoid reuse and always be the same for a given device. Examples include statically created devices like the loopback device and names deduced from hardware properties (including being given explicitly by the firmware). Names depending on the order of discovery, or in any other way on the existence of other devices, must not be marked as PREDICTABLE. NET_NAME_USER: The ifname was provided by user-space during net-device setup. NET_NAME_RENAMED: The net-device has been renamed from userspace. Once this type is set, it cannot change again. NET_NAME_UNKNOWN: This is an internal placeholder to indicate that we yet haven't yet categorized the name. It will not be exposed to userspace, rather -EINVAL is returned. The aim of these patches is to improve user-space renaming of interfaces. As a general rule, userspace must rename interfaces to guarantee that names stay the same every time a given piece of hardware appears (at boot, or when attaching it). However, there are several situations where userspace should not perform the renaming, and that depends on both the policy of the local admin, but crucially also on the nature of the current interface name. If an interface was created in repsonse to a userspace request, and userspace already provided a name, we most probably want to leave that name alone. The main instance of this is wifi-P2P devices created over nl80211, which currently have a long-standing bug where they are getting renamed by udev. We label such names NET_NAME_USER. If an interface, unbeknown to us, has already been renamed from userspace, we most probably want to leave also that alone. This will typically happen when third-party plugins (for instance to udev, but the interface is generic so could be from anywhere) renames the interface without informing udev about it. A typical situation is when you switch root from an installer or an initrd to the real system and the new instance of udev does not know what happened before the switch. These types of problems have caused repeated issues in the past. To solve this, once an interface has been renamed, its name is labelled NET_NAME_RENAMED. In many cases, the kernel is actually able to name interfaces in such a way that there is no need for userspace to rename them. This is the case when the enumeration order of devices, or in fact any other (non-parent) device on the system, can not influence the name of the interface. Examples include statically created devices, or any naming schemes based on hardware properties of the interface. In this case the admin may prefer to use the kernel-provided names, and to make that possible we label such names NET_NAME_PREDICTABLE. We want the kernel to have tho possibilty of performing predictable interface naming itself (and exposing to userspace that it has), as the information necessary for a proper naming scheme for a certain class of devices may not be exposed to userspace. The case where renaming is almost certainly desired, is when the kernel has given the interface a name using global device enumeration based on order of discovery (ethX, wlanY, etc). These naming schemes are labelled NET_NAME_ENUM. Lastly, a fallback is left as NET_NAME_UNKNOWN, to indicate that a driver has not yet been ported. This is mostly useful as a transitionary measure, allowing us to label the various naming schemes bit by bit. v8: minor documentation fixes v9: move comment to the right commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Kay Sievers <kay@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: fdb dumping takes a filter deviceJamal Hadi Salim2014-07-101-1/+3
| | | | | | | | | Dumping a bridge fdb dumps every fdb entry held. With this change we are going to filter on selected bridge port. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Call skb_get_hash in get_xps_queue and __skb_tx_hashTom Herbert2014-07-071-1/+1
| | | | | | | | Call standard function to get a packet hash instead of taking this from skb->sk->sk_hash or only using skb->protocol. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix GSO constants to match NETIF flagsTom Herbert2014-06-151-0/+7
| | | | | | | | | | | | Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-06-121-6/+93
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
| * net: Add support for device specific address syncingAlexander Duyck2014-06-021-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change provides a function to be used in order to break the ndo_set_rx_mode call into a set of address add and remove calls. The code is based on the implementation of dev_uc_sync/dev_mc_sync. Since they essentially do the same thing but with only one dev I simply named my functions __dev_uc_sync/__dev_mc_sync. I also implemented an unsync version of the functions as well to allow for cleanup on close. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-241-1/+26
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate ↵Sucheta Chakraborty2014-05-231-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | vlan: more careful checksum features handlingMichal Kubeček2014-05-221-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When combining real_dev's features and vlan_features, simple bitwise AND is used. This doesn't work well for checksum offloading features as if one set has NETIF_F_HW_CSUM and the other NETIF_F_IP_CSUM and/or NETIF_F_IPV6_CSUM, we end up with no checksum offloading. However, from the logical point of view (how can_checksum_protocol() works), NETIF_F_HW_CSUM contains the functionality of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM so that the result should be IP/IPV6. Add helper function netdev_intersect_features() implementing this logic and use it in vlan_dev_fix_features(). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: get rid of SET_ETHTOOL_OPSWilfried Klaebe2014-05-131-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-121-6/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: Add __dev_forward_skbHerbert Xu2014-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the helper __dev_forward_skb which is identical to dev_forward_skb except that it doesn't actually inject the skb into the stack. This is useful where we wish to have finer control over how the packet is injected, e.g., via netif_rx_ni or netif_receive_skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2014-06-031-1/+1
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
| * | | arch: Mass conversion of smp_mb__*()Peter Zijlstra2014-04-181-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | bonding: Fix stacked device detection in arp monitoringVlad Yasevich2014-05-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: Allow for more then a single subclass for netif_addr_lockVlad Yasevich2014-05-161-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently netif_addr_lock_nested assumes that there can be only a single nesting level between 2 devices. However, if we have multiple devices of the same type stacked, this fails. For example: eth0 <-- vlan0.10 <-- vlan0.10.20 A more complicated configuration may stack more then one type of device in different order. Ex: eth0 <-- vlan0.10 <-- macvlan0 <-- vlan1.10.20 <-- macvlan1 This patch adds an ndo_* function that allows each stackable device to report its nesting level. If the device doesn't provide this function default subclass of 1 is used. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud