summaryrefslogtreecommitdiffstats
path: root/include/linux/clk
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into ↵Mike Turquette2014-06-101-1/+34
|\ | | | | | | clk-next
| * ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)Andrii Tseglytskyi2014-06-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Duty Cycle Correction(DCC) needs to be enabled if the MPU is to run at frequencies beyond 1.4GHz for OMAP5, DRA75x, DRA72x. MPU DPLL has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). For further information, See the note on OMAP5432 Technical Reference Manual(SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and also the "OMAP543x ES2.0 DM Operating Conditions Addendum v0.5" chapter 2.1 "Micro Processor Unit (MPU)". Equivalent information is present in relevant DRA75x, 72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> [t-kristo@ti.com: added TRM / DM references for DCC clock rate] Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: OMAP2: clock: add DT boot support for cpufreq_ckTero Kristo2014-05-281-0/+1
| | | | | | | | | | | | The clock and clkdev for this are added manually. Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * CLK: TI: OMAP2: add clock init supportTero Kristo2014-05-281-0/+2
| | | | | | | | | | | | | | Adds support for registering the alias clocks, boot time clock-enable list and disabling autoidle of clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * CLK: TI: interface: add support for omap2430 specific interface clockTero Kristo2014-05-281-0/+1
| | | | | | | | | | | | | | OMAP2430 I2CHS modules require specific hardware ops to be used, so added a new compatible string for this. Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * CLK: TI: APLL: add support for omap2 apllsTero Kristo2014-05-281-1/+20
| | | | | | | | | | | | | | This patch adds support for omap2 type aplls, which have gating and autoidle functionality. Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * CLK: TI: DPLL: add support for omap2 core dpllTero Kristo2014-05-281-0/+6
| | | | | | | | | | | | | | | | OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | Merge tag 'clk-for-linus-3.16' of ↵Linus Torvalds2014-06-072-0/+25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux into next Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.16 are pretty typical: mostly clock driver additions and fixes. There are additions to the clock core code for some of the basic types (e.g. the common divider type has some fixes and featured added to it). One minor annoyance is a last-minute dependency that wasn't handled quite right. Commit ba0fae3b06a6 ("clk: berlin: add core clock driver for BG2/BG2CD") in this pull request depends on include/dt-bindings/clock/berlin2.h, which is already in your tree via the arm-soc pull request. Building for the berlin platform will break when the clk tree is built on it's own, but merged into your master branch everything should be fine" * tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits) mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs clk: export __clk_round_rate for providers clk: versatile: free icst on error return clk: qcom: Return error pointers for unimplemented clocks clk: qcom: Support msm8974pro global clock control hardware clk: qcom: Properly support display clocks on msm8974 clk: qcom: Support display RCG clocks clk: qcom: Return highest rate when round_rate() exceeds plan clk: qcom: Fix mmcc-8974's PLL configurations clk: qcom: Fix clk_rcg2_is_enabled() check clk: berlin: add core clock driver for BG2Q clk: berlin: add core clock driver for BG2/BG2CD clk: berlin: add driver for BG2x complex divider cells clk: berlin: add driver for BG2x simple PLLs clk: berlin: add driver for BG2x audio/video PLL clk: st: Terminate of match table clk/exynos4: Fix compilation warning ARM: shmobile: r8a7779: Add clock index macros for DT sources clk: divider: Fix overflow in clk_divider_bestdiv clk: u300: Terminate of match table ...
| * | clk: sunxi: Fixup clk_sunxi_mmc_phase_control to take a clk rather then a hw_clkHans de Goede2014-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | __clk_get_hw is supposed to be used by clk providers, not clk consumers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * | clk: shmobile: r8a7779: Add clocks supportSimon Horman2014-05-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The R8A7779 SoC has several clocks that are too custom to be supported in a generic driver. Those clocks are all fixed rate clocks with multiplier and divisor set according to boot mode configuration. Based on work for R-Car Gen2 SoCs by Laurent Pinchart. Cc: devicetree@vger.kernel.org Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * | clk: sunxi: Implement MMC phase controlEmilio López2014-05-051-0/+22
| |/ | | | | | | | | | | | | | | HdG: add header exporting clk_sunxi_mmc_phase_control Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | clk: at91: add slow clks driverBoris BREZILLON2014-05-071-0/+1
|/ | | | | | | | | | | | | | | AT91 slow clk is a clk multiplexer. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260 family) the multiplexer source is hardcoded with the OSCSEL signal. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds2014-04-051-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
| * ARM: zynq: Map I/O memory on clkc initMichal Simek2014-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | The clkc has its registers in the range of the slcr. Instead of passing around the slcr base address pointer, let the clkc get the address from the DT. This prepares the slcr to be a real driver with multiple memory ranges (slcr, clocks, pinctrl,...) Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENTTomi Valkeinen2014-02-191-0/+4
|/ | | | | | | | | | | | | | | | | | | | If CLK_SET_RATE_PARENT is set for a clkoutx2 clock, calling clk_set_rate() on the clock "skips" the x2 multiplier as there are no set_rate and round_rate functions defined for the clkoutx2. This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when d0f58bd3bba3877fb1af4664c4e33273d36f00e4 and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework and CLK_SET_RATE_PARENT. This patch implements set_rate and round_rate for clkoutx2. Tested on OMAP3430, OMAP3630, OMAP4460. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge tag 'clk-for-linus-3.14-part2' of ↵Linus Torvalds2014-01-281-0/+298
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux Pull more clock framework changes from Mike Turquette: "The second half of the clock framework pull requeust for 3.14 is dominated by platform support for Qualcomm's MSM SoCs, DT binding updates for TI's OMAP-ish processors and additional support for Samsung chips. Additionally there are other smaller clock driver changes and several last minute fixes. This pull request also includes the HiSilicon support that depends on the already-merged arm-soc pull request" [ Fix up stupid compile error in the source tree with evil merge - Grumpy Linus ] * tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits) clk: sort Makefile clk: sunxi: fix overflow when setting up divided factors clk: Export more clk-provider functions dt-bindings: qcom: Fix warning with duplicate dt define clk: si5351: remove variant from platform_data clk: samsung: Remove unneeded semicolon clk: qcom: Fix modular build ARM: OMAP3: use DT clock init if DT data is available ARM: AM33xx: remove old clock data and link in new clock init code ARM: AM43xx: Enable clock init ARM: OMAP: DRA7: Enable clock init ARM: OMAP4: remove old clock data and link in new clock init code ARM: OMAP2+: io: use new clock init API ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT ARM: OMAP3: hwmod: initialize clkdm from clkdm_name ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm ARM: OMAP2+: clock: use driver API instead of direct memory read/write ARM: OMAP2+: clock: add support for indexed memmaps ARM: dts: am43xx clock data ARM: dts: AM35xx: use DT clock data ...
| * CLK: TI: add am43xx clock init fileTero Kristo2014-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | clk-43xx.c now contains the clock init functionality for am43xx, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add omap3 clock init fileTero Kristo2014-01-171-0/+5
| | | | | | | | | | | | | | | | | | | | clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add interface clock support for OMAP3Tero Kristo2014-01-171-0/+5
| | | | | | | | | | | | | | | | | | | | OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add am33xx clock init fileTero Kristo2014-01-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | clk-33xx.c now contains the clock init functionality for am33xx, including DT clock registration and adding of static clkdev entries. This patch also moves the omap2_clk_enable_init_clocks declaration to the driver include, as this is needed by the am33xx clock init code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add dra7 clock init fileTero Kristo2014-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | clk-7xx.c now contains the clock init functionality for dra7, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add omap5 clock init fileTero Kristo2014-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | clk-54xx.c now contains the clock init functionality for omap5, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add omap4 clock init fileTero Kristo2014-01-171-0/+3
| | | | | | | | | | | | | | | | | | | | clk-44xx.c now contains the clock init functionality for omap4, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * clk: ti: add support for basic mux clockTero Kristo2014-01-171-0/+1
| | | | | | | | | | | | | | | | | | ti,mux-clock provides now a binding for basic mux support. This is just using the basic clock type. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add support for clockdomain bindingTero Kristo2014-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Clockdomain itself is rather misleading name for the hardware functionality, as at least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either clocks and/or IP blocks, thus idle-domain or such might be more appropriate. For most cases on these SoCs, the kernel doesn't even need the information and the mappings can be ignored. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add support for gate clockTero Kristo2014-01-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TI specific gate clocks. These behave as basic gate-clock, but have different ops / hw-ops for controlling the actual gate, for example waiting until the clock is ready. Several sub-types are supported: - ti,gate-clock: basic gate clock with default ops/hwops - ti,clkdm-gate-clock: clockdomain level gate control - ti,dss-gate-clock: gate clock with DSS specific hardware handling - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: ti: add support for ti divider-clockTero Kristo2014-01-171-0/+2
| | | | | | | | | | | | | | | | | | This patch adds support for TI divider clock binding, which simply uses the basic clock divider to provide the features needed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * clk: ti: add composite clock supportTero Kristo2014-01-171-0/+12
| | | | | | | | | | | | | | | | | | | | This is a multipurpose clock node, which contains support for multiple sub-clocks. Uses basic composite clock type to implement the actual functionality, and TI specific gate, mux and divider clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add autoidle supportTero Kristo2014-01-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | TI clk driver now routes some of the basic clocks through own registration routine to allow autoidle support. This routine just checks a couple of device node properties and adds autoidle support if required, and just passes the registration forward to basic clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: Add DPLL clock supportTero Kristo2014-01-171-0/+172
| | | | | | | | | | | | | | | | | | The OMAP clock driver now supports DPLL clock type. This patch also adds support for DT DPLL nodes. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: ti: add init support for clock IP blocksTero Kristo2014-01-171-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | ti_dt_clk_init_provider() can now be used to initialize the contents of a single clock IP block. This parses all the clocks under the IP block and calls the corresponding init function for them. This patch also introduces a helper function for the TI clock drivers to get register info from DT and append the master IP info to this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * CLK: TI: add DT alias clock registration mechanismTero Kristo2014-01-171-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | Some devices require their clocks to be available with a specific dev-id con-id mapping. With DT, the clocks can be found by default only with their name, or alternatively through the device node of the consumer. With drivers, that don't support DT fully yet, add mechanism to register specific clock names. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | Merge tag 'renesas-dt3-for-v3.14' of ↵Olof Johansson2014-01-031-0/+19
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * clk: shmobile: Add R-Car Gen2 clocks supportLaurent Pinchart2013-12-121-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The R-Car Gen2 SoCs (R8A7790 and R8A7791) have several clocks that are too custom to be supported in a generic driver. Those clocks can be divided in two categories: - Fixed rate clocks with multiplier and divisor set according to boot mode configuration - Custom divider clocks with SoC-specific divider values This driver supports both. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | Merge branch 'tegra/dma-reset-rework' into next/dtOlof Johansson2013-12-261-7/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bringing in the tegra dma/reset framework cleanup as a base for the DT changes. * tegra/dma-reset-rework: (320 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * | clk: tegra: remove legacy reset APIsStephen Warren2013-12-111-7/+0
| |/ | | | | | | | | | | | | | | | | Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
* | clk: at91: add PMC pll clocksBoris BREZILLON2013-12-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds new at91 pll clock implementation using common clk framework. The pll clock layout describe the PLLX register layout. There are four pll clock layouts: - at91rm9200 - at91sam9g20 - at91sam9g45 - sama5d3 PLL clocks are given characteristics: - min/max clock source rate - ranges of valid clock output rates - values to set in out and icpll fields for each supported output range These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.hBoris BREZILLON2013-12-021-0/+190
|/ | | | | | | | | | | | | This patch moves at91_pmc.h header from machine specific directory (arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory (include/linux/clk/at91_pmc.h). We need this to avoid reference to machine specific headers in clk drivers. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: mxs: remove custom .init_time hookSebastian Hesselbarth2013-09-291-2/+0
| | | | | | | | | | | This patch converts clk-imx2[38] clocksource_of_init compatible init associated with fsl,imx2[38]-clkctrl. With arch/arm calling of_clk_init(NULL) from time_init(), we can now also remove custom .init_time hooks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org>
* clk: sunxi: declare OF clock providerSebastian Hesselbarth2013-09-291-22/+0
| | | | | | | | | | | | Common clock framework allows to register clock providers to get called on of_clk_init() by using CLK_OF_DECLARE. This converts sunxi clock providers to make use of it and get rid of the mach specific clk init call. As sunxi has a bunch of independent clk provider nodes, we hook current clock init to board compatible to make it called once. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org>
* Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds2013-07-031-1/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull clock framework updates from Mike Turquette: "The common clock framework changes for 3.11 include new clock drivers across several different platforms and architectures, fixes to existing drivers, a MAINTAINERS file fix and improvements to the basic clock types that allow them to be of use to more platforms than before. Only a few fixes to the core framework are included with most all of the changes landing in the various clock drivers themselves." * tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits) clk: tegra: fix ifdef for tegra_periph_reset_assert inline clk: tegra: provide tegra_periph_reset_assert alternative clk: exynos4: Fix clock aliases for cpufreq related clocks clk: samsung: Add MUX_FA macro to pass flag and alias clk: add support for Rockchip gate clocks clk: vexpress: Make the clock drivers directly available for arm64 clk: vexpress: Use full node name to identify individual clocks clk: tegra: T114: add DFLL DVCO reset control clk: tegra: T114: add DFLL source clocks clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL clk: gate: add CLK_GATE_HIWORD_MASK clk: divider: add CLK_DIVIDER_HIWORD_MASK flag clk: mux: add CLK_MUX_HIWORD_MASK clk: Always notify whole subtree when reparenting MAINTAINERS: make drivers/clk entry match subdirs clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate clk: use clk_get_rate() for debugfs clk: tegra: Use override bits when needed clk: tegra: override bits for Tegra30 PLLM clk: tegra: override bits for Tegra114 PLLM ...
| * clk: tegra: fix ifdef for tegra_periph_reset_assert inlineStephen Warren2013-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7064f6b "clk: tegra: provide tegra_periph_reset_assert alternative" added ifdef'd static inline versions of some functions, but tested ARCH_TEGRA rather than CONFIG_ARCH_TEGRA, thus disabling these function in all cases. In some cases, this caused HW modules to misbehave; for example, the Tegra I2C driver BUG()d during boot on Seaboard. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
| * clk: tegra: provide tegra_periph_reset_assert alternativeArnd Bergmann2013-06-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | We have some tegra device drivers that are written to be platform independent but still use the tegra specific tegra_periph_reset_assert function. In order to build and link them without errors, this provides a static inline version of these functions that does nothing when Tegra support is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed up trivial merge issue]
| * clk: tegra: Use common of_clk_init functionPrashant Gaikwad2013-05-311-1/+0
| | | | | | | | | | | | | | | | | | Use common of_clk_init() function for clocks initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* | Merge tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx into next/socOlof Johansson2013-06-071-1/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Michal Simek: arm: Xilinx Zynq clock changes for v3.11 Change Xilinx Zynq DT clock description which reflects logical abstraction of Zynq's clock tree. - Refactor PLL driver - Use new clock controller driver - Change timer and uart drivers * tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx: clk: zynq: Remove deprecated clock code arm: zynq: Migrate platform to clock controller clk: zynq: Add clock controller driver clk: zynq: Factor out PLL driver Signed-off-by: Olof Johansson <olof@lixom.net>
| * | arm: zynq: Migrate platform to clock controllerSoren Brinkmann2013-05-271-1/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Zynq platform and its drivers to use the new clock controller driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Mike Turquette <mturquette@linaro.org>
* | clk: mvebu: disintegrate obsolete fileSebastian Hesselbarth2013-05-291-22/+0
|/ | | | | | | | | | Switch from function-centric to soc-centric clock drivers now makes a bunch of files obsolete. This deletes all files and Kconfig options that are not required anymore. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'drivers-for-linus' of ↵Linus Torvalds2013-05-041-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
| * clk: tegra: defer application of init tableStephen Warren2013-04-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | Merge branch 'depends/clk-for-3.10' into next/cleanupOlof Johansson2013-04-111-0/+22
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bringin in clk subsystem dependencies needed by sunxi. * depends/clk-for-3.10: (26 commits) clk: sunxi: drop an unnecesary kmalloc clk: sunxi: drop CLK_IGNORE_UNUSED clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag clk: mvebu: Use common of_clk_init() function clk: fix clk_mux::flags kerneldoc clk: allow reentrant calls into the clk framework clk: abstract locking out into helper functions clk: zynq: Add missing zynq clk header clk: sunxi: rename compatible strings arm: sunxi: Add useful information about sunxi clocks clk: arm: sunxi: Add a new clock driver for sunxi SOCs clk: ux500: Fix prcmu clocks registration ARM: imx: adapt clk_busy_mux to new clk_mux struct clk: Add composite clock type clk: add table lookup to mux clk: Fix incorrect return type in clk.c clk: prima2: fix return value check in sirfsoc_of_clk_init() clk:SPEAr1340: Correct parent clock configuration documentation: clk: fix couple of misspelling ...
OpenPOWER on IntegriCloud