summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* UBIFS: amend debugging inode size check function prototypeArtem Bityutskiy2011-07-044-6/+9
| | | | | | | | Add 'const struct ubifs_info *c' parameter to 'dbg_check_synced_i_size()' function because we'll need it in the next patch when we switch to debugfs. So this patch is just a preparation. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: amend debugging name check function prototypeArtem Bityutskiy2011-07-041-3/+5
| | | | | | | | | | Add 'struct ubifs_info *c' parameter to the 'dbg_check_name()' debugging function - it will be needed in one of the following commits where we switch to debugfs. So this is just a preparation. Mark parameters as 'const' while on it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: add few commentaries about TNCArtem Bityutskiy2011-07-041-0/+26
| | | | | | | Add a couple of comments - while looking into TNC I could not easily figure out few facts, so it is a good idea to document them in the code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: use correct flags in lpropsArtem Bityutskiy2011-07-043-8/+8
| | | | | | | | | | | | The UBIFS lpt tree is in many aspects similar to the TNC tree, and we have similar flags for these trees. And by mistake we use the COW_ZNODE flag for LPT in some places, instead of the right flag COW_CNODE. And this works only because these two constants have the same value. This patch makes all the LPT code to use COW_CNODE and also changes COW_CNODE constant value to make sure we do not misuse the flags any more. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: harmonize znode flag helpersArtem Bityutskiy2011-07-044-12/+34
| | | | | | | | | | | We have 3 znode flags: cow, obsolete, dirty. For the last flag we have a 'ubifs_zn_dirty()' helper function, but for the other 2 flags we use 'test_bit()' directly. This patch makes the situation more consistent and introduces helpers for the other 2 flags: 'ubifs_zn_cow()' and 'ubifs_zn_obsolete()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: remove dead codeArtem Bityutskiy2011-07-041-76/+30
| | | | | | | | Remove dead pieces of code under "if (c->min_io_size == 1)" statement - we never execute it because in UBIFS 'c->min_io_size' is always at least 8. This are leftovers from old pre-mainline prototype. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: remove unnecessary bracketsArtem Bityutskiy2011-07-041-1/+1
| | | | | | | Remove unnecessary brackets in "inode->i_flags |= (S_NOCMTIME)" statement to make the code not look silly. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: minor cleanup: use S_ISREG helperArtem Bityutskiy2011-07-041-1/+1
| | | | | | | Instead of using long "(inode->i_mode & S_IFMT) != S_IFREG" expression, use shorted "!S_ISREG(inode->i_mode)". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: rename dbg_check_dir_size functionArtem Bityutskiy2011-07-043-4/+4
| | | | | | | Since this function is not only about size checking, rename it to 'dbg_check_dir()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: improve inode dumping functionArtem Bityutskiy2011-07-043-5/+60
| | | | | | | | | Teach 'dbg_dump_inode()' dump directory entries for directory inodes. This requires few additional changes: 1. The 'c' argument of 'dbg_dump_inode()' cannot be const any more. 2. Users of 'dbg_dump_inode()' should not have 'tnc_mutex' locked. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: dump stack when pnode or nnode reading failsArtem Bityutskiy2011-07-041-0/+2
| | | | | | When we fail to read a pnode or nnode - print stacktrace if debugging is enabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: lessen the size of debugging info data structureArtem Bityutskiy2011-07-042-7/+22
| | | | | | | | | | | | | | | | This patch lessens the 'struct ubifs_debug_info' size by 90 bytes by allocating less bytes for the debugfs root directory name. It introduces macros for the name patter an length instead of hard-coding 100 bytes. It also makes UBIFS use 'snprintf()' and teaches it to gracefully catch situations when the name array is too short. Additionally, this patch makes 2 unrelated changes - I just thought they do not deserve separate commits: simplifies 'ubifs_assert()' for non-debugging case and makes 'dbg_debugfs_init()' properly verify debugfs return code which may be an error code or NULL, so we should you 'IS_ERR_OR_NULL()' instead of 'IS_ERR()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBIFS: return EROFS in case of broken commitArtem Bityutskiy2011-07-041-2/+2
| | | | | | | | | If commit failed and it is in broken state, UBIFS switches to R/O mode. Most operations return -EROFS in this case, except of commit which returns -EINVAL. Make it return -EROFS too for consistency. This is also important for our power cut emulation testing. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* mm: fix assertion mapping->nrpages == 0 in end_writeback()Jan Kara2011-06-271-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* romfs: fix romfs_get_unmapped_area() argument checkBob Liu2011-06-271-2/+6
| | | | | | | | | | | | | | | | | romfs_get_unmapped_area() checks argument `len' without considering PAGE_ALIGN which will cause do_mmap_pgoff() return -EINVAL error after commit f67d9b1576c ("nommu: add page_align to mmap"). Fix the check by changing it in same way ramfs_nommu_get_unmapped_area() was changed in ramfs/file-nommu.c. Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-06-275-31/+100
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: btrfs: fix inconsonant inode information Btrfs: make sure to update total_bitmaps when freeing cache V3 Btrfs: fix type mismatch in find_free_extent() Btrfs: make sure to record the transid in new inodes
| * btrfs: fix inconsonant inode informationMiao Xie2011-06-273-26/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iputting the inode, We may leave the delayed nodes if they have some delayed items that have not been dealt with. So when the inode is read again, we must look up the relative delayed node, and use the information in it to initialize the inode. Or we will get inconsonant inode information, it may cause that the same directory index number is allocated again, and hit the following oops: [ 5447.554187] err add delayed dir index item(name: pglog_0.965_0) into the insertion tree of the delayed node(root id: 262, inode id: 258, errno: -17) [ 5447.569766] ------------[ cut here ]------------ [ 5447.575361] kernel BUG at fs/btrfs/delayed-inode.c:1301! [SNIP] [ 5447.790721] Call Trace: [ 5447.793191] [<ffffffffa0641c4e>] btrfs_insert_dir_item+0x189/0x1bb [btrfs] [ 5447.800156] [<ffffffffa0651a45>] btrfs_add_link+0x12b/0x191 [btrfs] [ 5447.806517] [<ffffffffa0651adc>] btrfs_add_nondir+0x31/0x58 [btrfs] [ 5447.812876] [<ffffffffa0651d6a>] btrfs_create+0xf9/0x197 [btrfs] [ 5447.818961] [<ffffffff8111f840>] vfs_create+0x72/0x92 [ 5447.824090] [<ffffffff8111fa8c>] do_last+0x22c/0x40b [ 5447.829133] [<ffffffff8112076a>] path_openat+0xc0/0x2ef [ 5447.834438] [<ffffffff810c58e2>] ? __perf_event_task_sched_out+0x24/0x44 [ 5447.841216] [<ffffffff8103ecdd>] ? perf_event_task_sched_out+0x59/0x67 [ 5447.847846] [<ffffffff81121a79>] do_filp_open+0x3d/0x87 [ 5447.853156] [<ffffffff811e126c>] ? strncpy_from_user+0x43/0x4d [ 5447.859072] [<ffffffff8111f1f5>] ? getname_flags+0x2e/0x80 [ 5447.864636] [<ffffffff8111f179>] ? do_getname+0x14b/0x173 [ 5447.870112] [<ffffffff8111f1b7>] ? audit_getname+0x16/0x26 [ 5447.875682] [<ffffffff8112b1ab>] ? spin_lock+0xe/0x10 [ 5447.880882] [<ffffffff81112d39>] do_sys_open+0x69/0xae [ 5447.886153] [<ffffffff81112db1>] sys_open+0x20/0x22 [ 5447.891114] [<ffffffff813b9aab>] system_call_fastpath+0x16/0x1b Fix it by reusing the old delayed node. Reported-by: Jim Schutt <jaschut@sandia.gov> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Jim Schutt <jaschut@sandia.gov> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: make sure to update total_bitmaps when freeing cache V3Josef Bacik2011-06-251-3/+6
| | | | | | | | | | | | | | | | | | | | A user reported this bug again where we have more bitmaps than we are supposed to. This is because we failed to load the free space cache, but don't update the ctl->total_bitmaps counter when we remove entries from the tree. This patch fixes this problem and we should be good to go again. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: fix type mismatch in find_free_extent()Ilya Dryomov2011-06-251-2/+2
| | | | | | | | | | | | | | | | | | data parameter should be u64 because a full-sized chunk flags field is passed instead of 0/1 for distinguishing data from metadata. All underlying functions expect u64. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
| * Btrfs: make sure to record the transid in new inodesChris Mason2011-06-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | When we create a new inode, we aren't filling in the field that records the transaction that last changed this inode. If we then go to fsync that inode, it will be skipped because the field isn't filled in. Signed-off-by: Chris Mason <chris.mason@oracle.com>
* | Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds2011-06-274-6/+31
|\ \ | | | | | | | | | | | | | | | | | | * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: prevent bogus assert when trying to remove non-existent attribute xfs: clear XFS_IDIRTY_RELEASE on truncate down xfs: reset inode per-lifetime state when recycling it
| * | xfs: prevent bogus assert when trying to remove non-existent attributeDave Chinner2011-06-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the attribute fork on an inode is in btree format and has multiple levels (i.e node format rather than leaf format), then a lookup failure will trigger an assert failure in xfs_da_path_shift if the flag XFS_DA_OP_OKNOENT is not set. This flag is used to indicate to the directory btree code that not finding an entry is not a fatal error. In the case of doing a lookup for a directory name removal, this is valid as a user cannot insert an arbitrary name to remove from the directory btree. However, in the case of the attribute tree, a user has direct control over the attribute name and can ask for any random name to be removed without any validation. In this case, fsstress is asking for a non-existent user.selinux attribute to be removed, and that is causing xfs_da_path_shift() to fall off the bottom of the tree where it asserts that a lookup failure is allowed. Because the flag is not set, we die a horrible death on a debug enable kernel. Prevent this assert from firing on attribute removes by adding the op_flag XFS_DA_OP_OKNOENT to atribute removal operations. Discovered when testing on a SELinux enabled system by fsstress in test 070 by trying to remove a non-existent user.selinux attribute. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
| * | xfs: clear XFS_IDIRTY_RELEASE on truncate downDave Chinner2011-06-231-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an inode is truncated down, speculative preallocation is removed from the inode. This should also reset the state bits for controlling whether preallocation is subsequently removed when the file is next closed. The flag is not being cleared, so repeated operations on a file that first involve a truncate (e.g. multiple repeated dd invocations on a file) give different file layouts for the second and subsequent invocations. Fix this by clearing the XFS_IDIRTY_RELEASE state bit when the XFS_ITRUNCATED bit is detected in xfs_release() and hence ensure that speculative delalloc is removed on files that have been truncated down. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
| * | xfs: reset inode per-lifetime state when recycling itDave Chinner2011-06-232-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFS inodes has several per-lifetime state fields that determine the behaviour of the inode. These state fields are not all reset when an inode is reused from the reclaimable state. This can lead to unexpected behaviour of the new inode such as speculative preallocation not being truncated away in the expected manner for local files until the inode is subsequently truncated, freed or cycles out of the cache. It can also lead to an inode being considered to be a filestream inode or having been truncated when that is not the case. Rework the reinitialisation of the inode when it is recycled to ensure that it is pristine before it is reused. While there, also fix the resetting of state flags in the recycling error paths so the inode does not become unreclaimable. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2011-06-262-5/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: mark CONFIG_CIFS_NFSD_EXPORT as BROKEN cifs: free blkcipher in smbhash
| * | | cifs: mark CONFIG_CIFS_NFSD_EXPORT as BROKENJeff Layton2011-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This does not work properly with CIFS as current servers do not enable support for the FILE_OPEN_BY_FILE_ID on SMB NTCreateX and not all NFS clients handle ESTALE. For now, it just plain doesn't work. Mark it BROKEN to discourage distros from enabling it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | cifs: free blkcipher in smbhashJeff Layton2011-06-241-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is currently leaked in the rc == 0 case. Reported-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-06-264-116/+98
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: cifs: propagate errors from cifs_get_root() to mount(2) cifs: tidy cifs_do_mount() up a bit cifs: more breakage on mount failures cifs: close sget() races cifs: pull freeing mountdata/dropping nls/freeing cifs_sb into cifs_umount() cifs: move cifs_umount() call into ->kill_sb() cifs: pull cifs_mount() call up sanitize cifs_umount() prototype cifs: initialize ->tlink_tree in cifs_setup_cifs_sb() cifs: allocate mountdata earlier cifs: leak on mount if we share superblock cifs: don't pass superblock to cifs_mount() cifs: don't leak nls on mount failure cifs: double free on mount failure take bdi setup/destruction into cifs_mount/cifs_umount Acked-by: Steve French <smfrench@gmail.com>
| * | | cifs: propagate errors from cifs_get_root() to mount(2)Al Viro2011-06-241-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... instead of just failing with -EINVAL Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: tidy cifs_do_mount() up a bitAl Viro2011-06-241-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: more breakage on mount failuresAl Viro2011-06-241-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if cifs_get_root() fails, we end up with ->mount() returning NULL, which is not what callers expect. Moreover, in case of superblock reuse we end up leaking a superblock reference... Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: close sget() racesAl Viro2011-06-241-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | have ->s_fs_info set by the set() callback passed to sget() Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: pull freeing mountdata/dropping nls/freeing cifs_sb into cifs_umount()Al Viro2011-06-242-14/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | all callers of cifs_umount() proceed to do the same thing; pull it into cifs_umount() itself. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: move cifs_umount() call into ->kill_sb()Al Viro2011-06-241-18/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | instead of calling it manually in case if cifs_read_super() fails to set ->s_root, just call it from ->kill_sb(). cifs_put_super() is gone now *and* we have cifs_sb shutdown and destruction done after the superblock is gone from ->s_instances. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: pull cifs_mount() call upAl Viro2011-06-241-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... to the point prior to sget(). Now we have cifs_sb set up early enough. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | sanitize cifs_umount() prototypeAl Viro2011-06-243-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a) superblock argument is unused b) it always returns 0 Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: initialize ->tlink_tree in cifs_setup_cifs_sb()Al Viro2011-06-242-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | no need to wait until cifs_read_super() and we need it done by the time cifs_mount() will be called. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: allocate mountdata earlierAl Viro2011-06-241-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pull mountdata allocation up, so that it won't stand in the way when we lift cifs_mount() to location before sget(). Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: leak on mount if we share superblockAl Viro2011-06-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cifs_sb and nls end up leaked... Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: don't pass superblock to cifs_mount()Al Viro2011-06-244-22/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To close sget() races we'll need to be able to set cifs_sb up before we get the superblock, so we'll want to be able to do cifs_mount() earlier. Fortunately, it's easy to do - setting ->s_maxbytes can be done in cifs_read_super(), ditto for ->s_time_gran and as for putting MS_POSIXACL into ->s_flags, we can mirror it in ->mnt_cifs_flags until cifs_read_super() is called. Kill unused 'devname' argument, while we are at it... Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: don't leak nls on mount failureAl Viro2011-06-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if cifs_sb allocation fails, we still need to drop nls we'd stashed into volume_info - the one we would've copied to cifs_sb if we could allocate the latter. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | cifs: double free on mount failureAl Viro2011-06-241-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if we get to out_super with ->s_root already set (e.g. with cifs_get_root() failure), we'll end up with cifs_put_super() called and ->mountdata freed twice. We'll also get cifs_sb freed twice and cifs_sb->local_nls dropped twice. The problem is, we can get to out_super both with and without ->s_root, which makes ->put_super() a bad place for such work. Switch to ->kill_sb(), have all that work done there after kill_anon_super(). Unlike ->put_super(), ->kill_sb() is called by deactivate_locked_super() whether we have ->s_root or not. Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | | take bdi setup/destruction into cifs_mount/cifs_umountAl Viro2011-06-242-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2011-06-241-1/+13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-block: block: add REQ_SECURE to REQ_COMMON_MASK block: use the passed in @bdev when claiming if partno is zero block: Add __attribute__((format(printf...) and fix fallout block: make disk_block_events() properly wait for work cancellation block: remove non-syncing __disk_block_events() and fold it into disk_block_events() block: don't use non-syncing event blocking in disk_check_events() cfq-iosched: fix locking around ioc->ioc_data assignment
| * | | | block: use the passed in @bdev when claiming if partno is zeroTejun Heo2011-06-131-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6b4517a791 (block: implement bd_claiming and claiming block) introduced claiming block to support O_EXCL blkdev opens properly. bd_start_claiming() looks up the part 0 bdev and starts claiming block. The function assumed that there is only one part 0 bdev and always used bdget_disk(disk, 0) to look it up; unfortunately, this isn't true for some drivers (floppy) which use multiple block devices to denote different operating parameters for the same physical device. There can be multiple part 0 bdev's for the same device number. This incorrect assumption caused the wrong bdev to be used during claiming leading to unbalanced bd_holders as reported in the following bug. https://bugzilla.kernel.org/show_bug.cgi?id=28522 This patch updates bd_start_claiming() such that it uses the bdev specified as argument if its partno is zero. Note that this means that different bdev's can be used for the same device and O_EXCL check can be effectively bypassed. It has always been broken that way and floppy is fortunately on its way out. Leave that breakage alone. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec> Tested-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec> Cc: stable@kernel.org # >= v2.6.36 Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2011-06-241-14/+25
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix wsize negotiation to respect max buffer size and active signing (try #4) CIFS: Fix problem with 3.0-rc1 null user mount failure
| * | | | | cifs: fix wsize negotiation to respect max buffer size and active signing ↵Jeff Layton2011-06-231-13/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (try #4) Hopefully last version. Base signing check on CAP_UNIX instead of tcon->unix_ext, also clean up the comments a bit more. According to Hongwei Sun's blog posting here: http://blogs.msdn.com/b/openspecification/archive/2009/04/10/smb-maximum-transmit-buffer-size-and-performance-tuning.aspx CAP_LARGE_WRITEX is ignored when signing is active. Also, the maximum size for a write without CAP_LARGE_WRITEX should be the maxBuf that the server sent in the NEGOTIATE request. Fix the wsize negotiation to take this into account. While we're at it, alter the other wsize definitions to use sizeof(WRITE_REQ) to allow for slightly larger amounts of data to potentially be written per request. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | | | CIFS: Fix problem with 3.0-rc1 null user mount failurePavel Shilovsky2011-06-221-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Figured it out: it was broken by b946845a9dc523c759cae2b6a0f6827486c3221a commit - "cifs: cifs_parse_mount_options: do not tokenize mount options in-place". So, as a quick fix I suggest to apply this patch. [PATCH] CIFS: Fix kfree() with constant string in a null user case Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | | | | | Remove unneeded version.h includes from fs/Jesper Juhl2011-06-242-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was pointed out by 'make versioncheck' that some includes of linux/version.h were not needed in fs/ (fs/btrfs/ctree.h and fs/omfs/file.c). This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-06-224-12/+11
|\ \ \ \ \ \ | |/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: jfs: agstart field must be 64 bits JFS: Don't save agno in the inode jfs: Update agstart when resizing volume jfs: old_agsize should be 64 bits in jfs_extendfs
OpenPOWER on IntegriCloud