summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/iTCO_wdt.c
Commit message (Collapse)AuthorAgeFilesLines
* PM / watchdog: iTCO: stop watchdog during system suspendRafael J. Wysocki2015-04-031-0/+51
| | | | | | | | | | | | | | | | | | | If the target sleep state of the system is not an ACPI sleep state (S1, S2 or S3), the TCO watchdog needs to be stopped during system suspend, because it may not be possible to ping it any more after timekeeping has been suspended (suspend-to-idle does that for one example). For this reason, provide ->suspend_noirq and ->resume_noirq callbacks for the iTCO watchdog driver and use them to stop and restart the watchdog during system suspend and resume, respectively, if the system is not going to enter an ACPI sleep state (in which case the watchdog will be stopped by the platform firmware before the state is entered). Reported-and-tested-by: Borun Fu <borun.fu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
* watchdog: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds2014-04-071-55/+82
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
| * watchdog: iTCO_wdt: Add support for v3 siliconPeter Tyser2014-03-191-55/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some new Atom's, eg Avoton and Bay Trail, have slightly different iTCO functionality: - The watchdog timer ticks at 1 second instead of .6 seconds - Some 8 and 16-bit registers were combined into 32-bit registers - Some registers were removed (DAT_IN, DAT_OUT, MESSAGE) - The BOOT_STS field in TCO_STS was removed - The NO_REBOOT bit is in the PMC area instead of GCS Update the driver to support the above changes and bump the version to 1.11. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Rajat Jain <rajatjain@juniper.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | watchdog: iTCO_wdt: Fix the parent deviceJean Delvare2014-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich (the PCI device.) Setting the parent right makes it much easier for the user to figure out which driver/module is handling the watchdog device node. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | watchdog: fix checkpatch warnings and errorJingoo Han2014-03-311-3/+3
|/ | | | | | | | | | | | | Fix the following checkpatch warnings and error: WARNING: quoted string split across lines WARNING: braces {} are not necessary for single statement blocks WARNING: __initdata should be placed after ibmasr_id_table[] WARNING: please, no space before tabs ERROR: do not initialise statics to 0 or NULL Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Get rid of MODULE_ALIAS_MISCDEV statementsJean Delvare2013-11-171-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
* watchdog: use dev_get_platdata()Jingoo Han2013-11-171-1/+1
| | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: remove use of __devexitBill Pemberton2012-11-281-2/+2
| | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* watchdog: remove use of __devinitBill Pemberton2012-11-281-1/+1
| | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* watchdog: remove use of __devexit_pBill Pemberton2012-11-281-1/+1
| | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mfd: lpc_ich: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston2012-09-161-0/+1
| | | | | | | | | This patch adds the Watchdog Timer Device IDs for the Intel Lynx Point-LP PCH. The Device IDs are defined in drivers/mfd/lpc_ich.c Signed-off-by: James Ralston <james.d.ralston@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* watchdog: iTCO_wdt.c: convert to watchdog coreWim Van Sebroeck2012-07-231-165/+48
| | | | | | | This patch converts the iTCO_wdt watchdog driver to use the generic watchdog framework. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: add platform driver module aliasJan Beulich2012-06-281-0/+1
| | | | | | | | | | | | | | The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt.c: fix printk format warningsRandy Dunlap2012-05-301-3/+3
| | | | | | | | | | | Fix printk format warnings: drivers/watchdog/iTCO_wdt.c:577:3: warning: format '%04llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/watchdog/iTCO_wdt.c:594:3: warning: format '%04llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/watchdog/iTCO_wdt.c:600:2: warning: format '%04llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Convert iTCO_wdt driver to mfd modelAaron Sierra2012-05-091-418/+111
| | | | | | | | | | This patch converts the iTCO_wdt driver to use the multi-function device driver model. It uses resources discovered by the lpc_ich driver, so that it no longer does its own PCI scanning. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* watchdog: nowayout is boolWim Van Sebroeck2012-03-271-2/+2
| | | | | | | nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Use pr_<fmt> and pr_<level>Joe Perches2012-03-271-32/+23
| | | | | | | | | | | | Use the current logging styles. Make sure all output has a prefix. Add missing newlines. Remove now unnecessary PFX, NAME, and miscellaneous other #defines. Coalesce formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDsSeth Heasley2012-01-271-0/+35
| | | | | | | This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2)Wim Van Sebroeck2011-12-271-3/+3
| | | | | | | | | | | | | | | | | | Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver The previous patch breaks reset watchdog behaviour on the older hardware. It is therefor better to make sure that the behaviour for older hardware (<=ICH5 or 6300ESB) is preserved and that the behaviour for newer hardware is changed. We therefor use the iTCO_version to see if we need the clearing of the SMI_TCO_EN bit in the SMI_EN register. So the new behaviour becomes: turn_SMI_watchdog_clear_off=0 -> Do not turn off SMI clearing watchdog. turn_SMI_watchdog_clear_off=1 -> Turn off SMI clearing watchdog when iTCO_version=1 (ICHO till ICH5 + 6300ESB only) turn_SMI_watchdog_clear_off=2 -> Turn off SMI clearing watchdog. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearingWim Van Sebroeck2011-11-051-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver Jiri Slaby: 28d41f53f broke temperature sensors on a ICH10 chipset The iTCO_wdt driver disables the SMI. This breaks good working of newer hardware. The disabling of the SMI by the TCO logic dates back from the i810-tco driver from Nils Faerber (around 28 July 2000). The reason for this was that some BIOSes install handlers reset or disable the watchdog timer instead of resetting the system. The trick to fix this was to disable the SMI (by clearing the SMI_TCO_EN bit of the SMI_EN register) to prevent this from happening. This however has strange effects on newer hardware. So we are in a situation that a fix for broken old hardware affects newer hardware. The correct solution is to make this fix an option (with the new module parameter: turn_SMI_watchdog_clear_off) so that the default behaviour is the unfixed version. the next patch will be to move this in the start and stop functions of the driver and to add a new module parameter for the global_smi_en bit and to get rid of the vendor_support code. This fix can have an effect on old (typical ICH & ICH2 chipsets) motherboards that have a broken BIOS implementation concerning TCO logic. In these case the module parameter turn_SMI_watchdog_clear_off=1 will need to be added. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: remove empty pm-functionsWolfram Sang2011-07-261-5/+0
| | | | | | | | | | | While checking what watchdog drivers usually do in suspend/resume to spot common behaviour for the watchdog framework, I found these drivers which do nothing but add some cruft. Remove it, it is superfluous. New approaches should probably be done with pm_ops anyway. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: clean-up PCI device ID'sWim Van Sebroeck2011-07-221-268/+139
| | | | | | | | Clean up of the iTCO_wdt PCI device ID's. Own macro is replaced by the PCI_VDEVICE macro. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCHSeth Heasley2011-04-261-0/+97
| | | | | | | | This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: cleanup spaces before tabsWim Van Sebroeck2011-03-151-1/+1
| | | | | | | cleanup spaces before tabs in drivers/watchdog/ Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: convert to DEFINE_PCI_DEVICE_TABLEWim Van Sebroeck2011-03-151-1/+1
| | | | | | | Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel DH89xxCC PCHSeth Heasley2011-01-121-1/+5
| | | | | | | | This patch adds the DeviceIDs for TCO Watchdog on the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel NM10 DeviceIDsWim Van Sebroeck2011-01-121-1/+5
| | | | | | | | This patch adds the Intel NM10 DeviceIDs for iTCO Watchdog. Reported-by: Dan Weinlader <dan@weinlader.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCHSeth Heasley2010-12-021-2/+6
| | | | | | | | This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init codePrarit Bhargava2010-10-281-2/+0
| | | | | | | | | | | | | | | | The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove to fail because of an incorrect usage count. The probe for this driver does a for_each_pci_dev() which gets a reference for a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop puts a reference for a pci_dev when iTCO_wdt_init() fails, so the iTCO_wdt_init() does not need to do any pci_dev_put()'s. The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: Cleanup warning messagesPrarit Bhargava2010-10-281-9/+12
| | | | | | | | | | | | | | | | | | | | | | The current iTCO_wdt driver warnings are confusing. Currently when the device driver returns an error the console contains: iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected After the patch, iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, device disabled by hardware/BIOS Clean this up and use the word "device" to describe the device. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDsSeth Heasley2010-10-281-0/+3
| | | | | | | | This patch adds the Intel Patsburg (PCH) DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* iTCO_wdt: fix TCO V1 timeout values and limitsPádraig Brady2010-05-251-9/+20
| | | | | | | | | | | | | | For TCO V1 devices the programmed timeout was twice too long because the fact that the TCO V1 timer needs to count down twice before triggering the watchdog, wasn't accounted for. Also the timeout values in the module description and error message were clarified. And the _STS registers are 16 bit instead of 8 bit. Signed-off-by: Pádraig Brady <P@draigBrady.com> Tested-by: Simon Kagstrom <simon.kagstrom@netinsight.se> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: TCO Watchdog patch for additional Intel Cougar Point ↵Seth Heasley2010-04-061-6/+93
| | | | | | | | | | | DeviceIDs This patch adds the Intel Cougar Point PCH LPC Controller DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@kernel.org>
* [WATCHDOG] watchdog_info constifyWim Van Sebroeck2010-03-071-1/+1
| | | | | | | make the watchdog_info struct const where possible. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: clean up probe(), modify err msgNaga Chumbalkar2010-03-061-10/+9
| | | | | | | | | | | | It's possible that the platform is not allowing reboot via TCO timer expiration. Also, differentiate between not finding a chipset that has TCO, and the case where TCO is present but the driver fails to initialize for some reason. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDsSeth Heasley2010-01-181-1/+44
| | | | | | | | This patch adds the Intel Cougar Point and PCH DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoCImre Kaloz2009-12-231-0/+4
| | | | | | | | add PCI ID for the Intel EP80579 (Tolapai) SoC Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt.c - cleanup chipset documentationWim Van Sebroeck2009-12-041-44/+17
| | | | | | | Cleanup the documentation about the supported chipsets. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: Add support for Intel Ibex PeakSeth Heasley2009-12-041-1/+12
| | | | | | | | Add the Intel Ibex Peak (PCH) Device IDs to iTCO_wdt.c. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: fix memory corruption when RCBA is disabled by hardwareDenis V. Lunev2009-06-181-3/+9
| | | | | | | | | | | | | | According to 9.1.33 on p.343 of ICH8.pdf RCBA can be disabled by hardware if bit 0 of RCBA register is not set. Perform correct check for this to prevent memory corruption under some virtual machines where this feature is disabled. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vasily Averin <vvs@openvz.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] iTCO_wdt: Cleanup codeWim Van Sebroeck2009-06-181-12/+12
| | | | | | | Clean-up the iTCO_wdt code so that checkpatch.pl get's happy... Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] More coding-style and trivial clean-upWim Van Sebroeck2009-03-251-5/+10
| | | | | | | Some more cleaning-up of the watchdog drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2Wim Van Sebroeck2009-02-141-21/+14
| | | | | | | | | | bugzilla: #12363 commit 7cd5b08be3c489df11b559fef210b81133764ad4 added a second regression: some Dell's and Compaq's lockup on boot. So we revert most of the code. The ICH9 reboot issue remains in place and will need some more fixing... :-( Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* iTCO_wdt: fix typo when setting TCO_EN bitLinus Torvalds2008-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsetsWim Van Sebroeck2008-11-211-45/+73
| | | | | | | | Add support for the following I/O controller hubs: ICH7DH, ICH9M, ICH9M-E, ICH10, ICH10R, ICH10D and ICH10DO. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt : correct status clearingWim Van Sebroeck2008-11-211-2/+3
| | | | | | | | | | | The iTCO_wdt code was not clearing the correct bits. It now clears the timeout status bit and then the SECOND_TO_STS bit and then the BOOT_STS bit. Note: we should first clear the SECOND_TO_STS bit before clearing the BOOT_STS bit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboardsWim Van Sebroeck2008-11-211-13/+28
| | | | | | | | | | | | Bugzilla #9868: On Intel motherboards with the ICH9 based I/O controllers (Like DP35DP and DG33FB) the iTCO timer counts but it doesn't reboot the system after the counter expires. This patch fixes this by moving the enabling & disabling of the TCO_EN bit in the SMI_EN register into the start and stop code. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] more coding style clean-up'sWim Van Sebroeck2008-08-061-5/+5
| | | | | | More coding style clean-up's. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Coding style - Indentation - part 2Wim Van Sebroeck2008-08-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1. Main changes: * Re-structure the ioctl switch call for all drivers as follows: switch (cmd) { case WDIOC_GETSUPPORT: case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: case WDIOC_GETTEMP: case WDIOC_SETOPTIONS: case WDIOC_KEEPALIVE: case WDIOC_SETTIMEOUT: case WDIOC_GETTIMEOUT: case WDIOC_GETTIMELEFT: default: } This to make the migration from the drivers to the uniform watchdog device driver easier in the future. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
OpenPOWER on IntegriCloud